0.87 grams of nitrous acid is mixed with potassium hydroxide, find the mass of each in grams. Find the pH of the acid and pOH of the base.

The correct answer to the given question about kinetic and potential energy is option d)  0 J to 4 J

The energy an object has as a result of motion is referred to as kinetic energy. The amount of effort needed to move a mass-based body from rest to the given velocity is how it is defined. Unless its speed changes, the body retains the kinetic energy it gained during acceleration. The same amount of labor is used up when the body slows down from its current speed to a state of rest. Any term in the Lagrangian of a system that has a derivative with respect to time is formally referred to as kinetic energy. The English unit of kinetic energy is the foot-pound, but the joule is the standard unit.

Question

Ali rolled a ball down a hill. This graph shows the kinetic and potential energy of the moving ball.

A line graph The graph is titled Mechanical Energy and shows an inverse relationship between Potential energy and Kinetic Energy. The Y axis is Potential energy (J). The X axis is Kinetic energy (J). The point of the graph are as such: (0, 5); (1, 4); (2, 3); (3, 2); (4, 1); (5, 0)

According to the graph, what is the mechanical energy of the ball?

A. 0 J

B. 5 J

C. 20 J to 25 J

D. 0 J to 4 J

To learn more about kinetic energy click here

brainly.com/question/26472013

#SPJ4

The arrows are used to illustrate the flow of electrons. follow the arrows to predict the intermediate and product of reaction , the product is :

CH₃ - C -CH₃  + H₂O  +  ⁻OCH₃

          ||

          O

The reaction is in between the 2 methoxypropan-2-ol and the hydroxide ion. the OH⁻ ion is the strong nucleophile and contain the negative charged. the hydroxyl group acts as a proton of the compound is acidic because of the electronegativity difference. the hydroxyl ion takes protons and form the water.

The reaction is given as follows :

         OH

          |

CH₃ - C - OCH₃   + OH⁻  ---->  CH₃ - C -CH₃  + H₂O  +  ⁻OCH₃

           |                                       ||

          CH₃                                  O

To learn more about reaction here

https://brainly.com/question/14583045

#SPJ4

Correct task : At 25°C, only 0.0140 mol of the generic salt AB3 is soluble in 1.00 L of water. What is the Ksp of this salt at 25°C.

Solution:

When the salt dissolves, it dissociates as follows:

AB3 --> A3+ + 3B⁻

--S--------S-------3S--

The molar solubility (S) is the number of moles that can dissolve in 1 L of solution.

Molar solubility of salt is (0.0140 mol) / (1.00 L) = 0.0140 mol/L.

According to the dissociation equation:

Solubility of A3+ is 0.0140 mol/L and solubility of B⁻ is 3×0.0140 mol= 0.0420 mol/L.

[A3+] = 0.0140 mol/L.

[B⁻] = 0.0420 mol/L.

Ksp is the solubility product constant and calculated as follows:

Ksp(AB3) = [A3+] × [B⁻]3

Ksp(AB3) = [0.0140] × [0.0420]3

Ksp(AB3) = 10.37×10-7.

Ksp of this salt is 1.04×10-6.

Answer: 1.04×10-6 is the Ksp of this salt at 25°C.

First we understand about main physical properties of minerals which helps in identification of common minerals.

Habit: Used to classify minerals into categories such as Cubic, Rectangular, Bladed, Prismatic, Longer, etc. depending on their shape.

Hardness: The hardness is used to identify a type of mineral based on their hardness on the Moh's scale of hardness (ranges from 0-10). In order to do this, an unknown type of mineral is scratched with a substance or mineral with a known hardness level and then referenced with the Moh's scale of hardness in order to identify the mineral.

Tenacity: Tenacity is used to identify minerals by measuring how resistant they are to being bent, crushed, or broken.

Density: The density of a mineral is determined by comparing the mass of the mineral to the volume of the mineral.

Color: The color that the particular mineral displays is used to identify it.

Luster: This a reflection property of a mineral towards light incident on it's surface as after reflection how it appears by reflection of light

Learn more about minerals:

brainly.com/question/18078524

#SPJ4

The time it takes for one-half of the radioactive parent isotope to decay into the daughter isotope is known as the half-life.

As a result, if we begin with 1 gram of the parent isotope, there will only be 0.5 gram of the parent isotope left after 1 half-life. The fundamental idea behind radiometric dating is that by comparing an isotope's presence in a sample to its abundance on Earth and its known half-life (rate of decay), you may determine the sample's age. A radiometric dating technique is radiocarbon dating, often known as carbon-14 dating. It determines the age of carbon-bearing by using the naturally occurring radioisotope carbon-14 (14C).

Learn more about isotope here-

https://brainly.com/question/27475737

#SPJ4

Answer: It is the radiation of energy.

Explanation:

Answer:

Option 3 represents correct Lewis structure for NH3

The speed of light constant ( c ) is 3.00 × 108 ( m / s ). Therefore, option A is correct.

Speed is what it means. the speed at which an object's location changes in any direction. The distance traveled in relation to the time it took to travel that distance is how speed is defined. Since speed simply has a direction and no magnitude, it is a scalar quantity.

"As a force, that is the speed of light in a vacuum. If you wonder why c, the Latin term celeritas, which means speed, is the solution."

This establishes the exact value of the speed of light in a vacuum at 299,792,458 m/s. This gives a very succinct response to the question, It does not, however, settle the issue. The SI is based on a lot of real-world factors.

Thus, option A is correct.

To learn more about the speed, follow the link;

https://brainly.com/question/7359669

#SPJ1

A resource can be classified as renewable or nonrenewable based on whether it can replace itself at the rate it is used up or whether it has a finite supply.

To learn more about Renewable energy refer to:

https://brainly.com/question/7995

#SPJ1

The conformation below in the dehydrohalogenation of 2-bromobutane results in the immediate production of cis-2-butene.

Dehydrohalogenation in chemistry is an elimination process that eliminates a hydrogen halide from a substrate. Although the reaction is frequently linked to the synthesis of alkenes, it has other uses as well.

A hydrogen halide is eliminated (removed) from a substrate during a dehydrohalogenation reaction. Although the reaction is frequently linked to the synthesis of alkenes, it has other uses as well.

The type of atoms or groups of atoms that leave the molecule serves as a frequent indicator of elimination reactions. Dehydrohalogenation, for instance, is the removal of a hydrogen atom along with a halogen atom; dehalogenation is the removal of two halogen atoms. Dehydration, on the other hand, is the removal of a water molecule, typically from alcohol.

Learn more about Dehydrohalogenation here:

https://brainly.com/question/7318445

#SPJ4

Therefore, option an is the best choice and the equilibrium constant is 0.32. The best choice is that.

The equilibrium constant's value falls as temperature rises. An rise in temperature increases the value of the equilibrium constant when the forward reaction is endothermic. As the temperature fluctuates, so does the equilibrium position. For elements in their standard condition, G0f G f 0 is taken into consideration as zero. As a result, the reaction's standard change in Gibb's free energy at 25 degrees Celsius is 98.746 kJ. Since there is no longer any free energy to fuel the process at equilibrium, G=0.

Learn more about reaction here-

https://brainly.com/question/28984750

#SPJ4

The structural formulas for the product formed by treating each compound with propyl magnesium bromide followed by aqueous HCl is given as follows :

                 CH₃CH₂CH₂ - CH₂ - OH

                          butanol

The propyl magnesium bromide , the formula is given as follows :

  CH₃CH₂CH₂ -MgBr

when it react with compound CH₂O , the product formed is the butan - 1 - ol. the structural formula is given as follows :

     CH₃CH₂CH₂ - CH₂ - OH

                          butanol

The propyl magnesium bromide is acts as grinard reagent which react with CH₂O and will form the alcohol, that butanol. here the  CH₂O is called as the formaldehyde.

To learn more about propyl magnesium bromide here

https://brainly.com/question/27346672

#SPJ4

Answer:

the answer is 373

Explanation:

K=°C + 273

K=100+273=373

A. The units remaining after the conversion is mi

B. The units remaining after the conversion is atoms

A. How do I determine the units remaining?

From the question given above, the following expression was obtained:

To know the unit that will remain, we shall simplify the expression. Details below:

in × (ft/in) × (mi/ ft)

Cancel out in

ft × (mi/ ft)

Cancel out ft

mi

Thus, the unit remaining is mi

B. How do I determine the units remaining?

From the question given above, the following expression was obtained:

To know the unit that will remain, we shall simplify the expression. Details below:

g × (mol/g) × (atoms/ mol)

Cancel out g

mol × (atoms/ mol)

Cancel out mol

atoms

Thus, the unit remaining is atoms

Learn more about units conversion:

https://brainly.com/question/19420601

#SPJ1

Answer:

2Fe+2Cl2____2FeCl3

Explanation:

Fe has positive ions and hence to balance you add two ions to each side of the equation.

The primary application of Benedict's test is to detect the presence of simple carbohydrates in an unidentified analyte.

Answer:

!

Benedict test is commonly done to detect

Option 1 is correct because potassium ions in argon contain 18 electrons. Thus, there are 18 isoelectronic in all that are present in Ar for K+. The electrical arrangement of these two ions is the same as that of Ar.

K+ and Cl ions are hence isoelectronic with Ar. Argon is isoelectronic with potassium ions that have a positive charge. For an ion with a -1 charge to become isoelectronic with argon, it would only have needed to gain 1 electron. Chlorine must have been present there.

Similar to the previous element, the next one can create a monovalent cation by losing one electron and isoelectronizing with argon. These include the potassium cation, K+, the chloride anion, Cl, and the sulphide anion, S2. Isoelectronic ions are said to have the same number of protons and electrons.

To learn more about isoelectronic  please click on below link

https://brainly.com/question/6807313

#SPJ4

NH3 i.e. ammonia compounds has a number of electron rich regions that is different from the other compounds.

Hydrides that are electron-rich have more electrons than are required for bonding. The majority of the additional electrons are found on the central atom's single pair of electrons. These kinds of compounds are typically produced by the combination of groups of 15, 16, and 17 elements. Think about NH3, PH3, etc. specific electron. Electron-specific hydrogen molecules have enough valence electrons to form covalent bonds. Those hydrides that possess precisely the proper number of electrons for a covalent connection are known as electron precise hydrides. These kinds of compounds are typically made with group 14 components. The compounds typically have a tetrahedral shape. CH4, SiH4, as an example, etc. Electron-deficient compounds are those that don't have enough electrons to completely fill the octet of the central atom. For each pair of bonded atoms to form a conventional electron-pair bond, these compounds are deficient in electrons. Electron-deficient compounds can be found in polymorphic forms to make up for their lack of electrons. Compounds with less than 8 electrons in their valence shells, such as B2H6, AlH3, etc., are considered to be electron-deficient.

To know more about electron rich please refer: https://brainly.com/question/20388963

#SPJ4

The final molarity of the ammonium cation in the solution is 0.066M.

Firstly, we need to calculate the number of moles of ammonium sulfate:

No of moles = mass(g)/molar mass

No of moles = 2.57/132.14

No of moles = 0.0195 mol

When ammonium sulfate dissolves in sodium chromate, the following reaction will take place:

(NH₄)₂SO₄ + Na₂CrO₄ ------> (NH₄)₂CrO₄ + Na₂SO₄

No of Moles of sodium chromate = molarity x volume

                                                        = 66 x 0.200

No of moles of Sodium Chromate = 0.0132 mol

According to the reaction, 1 mol of sodium chromate produces 1 mol of ammonium chromate.

In this reaction, the sodium chromate amount is less than ammonium sulfate.

It can be concluded that Sodium chromate is a limiting reagent.

Therefore 0.0134 mol of ammonium cation is present in the resulting solution.

Molarity of ammonium cation = 0.0134 mol / 0.2 L

Molarity = 0.066 M

Therefore, 0.066M is the Molarity of the ammonium cation.

To know more about the concentration of compounds, click here:

https://brainly.com/question/17206790

#SPJ4

Answer: To solve this problem, you can use the first-order rate equation, which is given by:

[reactant] = [reactant]0 * e^(-k*t)

where [reactant] is the concentration of the reactant at time t, [reactant]0 is the initial concentration of the reactant, k is the rate constant, and t is the time.

Plugging in the given values, we get:

[reactant] = 1.304 M * e^(-4.10 x 10^-3 M s^-1 * 90.45 s)

= 1.304 M * e^(-0.0366)

= 1.304 M * 0.933

= 1.21 M

To express the answer with 3 significant figures, you can round the answer to 1.21 M. Therefore, the concentration of the reactant after 90.45 seconds is 0.933 ± 1%.

Benzene is a carbon and hydrogen compound with aromatic properties. The chemical formula for benzoene is C6H6.To determine the number of sigma bonds in this, we can create the skeletal structure using only sigma bond representations.

Let's show the structure of benzene.

As can be seen, there are six C-H bonds and six C-C bonds.

We may therefore say that benzene has a total of 12 sigma bonds in it.

When we look at the structure of benzene, we can see that it has three C=C bonds.

There are consequently 3 pi bonds and 12 sigma bonds. As a result, benzene contains 15 covalent bonds.

Since benzene has 12 and 3 sigma and pi bonds, respectively, the correct answer is that it does.

Additional

learn more about sigma bond here:

https://brainly.com/question/27758888

#SPJ4

The electron configuration and group number is 1s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^10

Electron configuration is the distribution of electrons of an atom or molecule in atomic or molecular orbitals. It describes the energy levels, orbitals, and the number of electrons in each of the atom's orbitals. Electron configuration provides an understanding of the atom's structure, reactivity, and the likelihood of chemical reactions to occur. It also serves as a predictor of the atom's physical and chemical properties. Electron configuration is determined by the number of protons in the nucleus and the principal quantum number of the electron.

This is the ground-state electron configuration for the element titanium, which is located in group 4 of the periodic table.
The 1s orbital is filled with two electrons, the 2s orbital is filled with two electrons, the 2p orbital is filled with six electrons, the 3s orbital is filled with two electrons, the 3p orbital is filled with six electrons, the 4s orbital is filled with two electrons, and the 3d orbital is filled with ten electrons. This configuration of electrons corresponds with titanium's position in group 4 of the periodic table, which contains elements with four valence electrons in the outermost energy level.

To learn more about electron configuration
https://brainly.com/question/29318232
#SPJ4

In this question we are asked to fill up the blank in the following statement:

The reaction between cesium metal and chlorine gas is a ___ reaction. on the other hand, the reaction between ammonia and vinegar is a____ reaction and the one between sodium iodide and lead(ii) perchlorate is a ____ reaction.

So, the statement becomes:

The reaction between cesium metal and chlorine gas is a Redox reaction reaction.

On the other hand, the reaction between ammonia and vinegar is a Acid Base Reaction, and

The one between sodium iodide and lead(ii) perchlorate is a  Precipitation Reaction..

To know more Chemical Reaction:

brainly.com/question/29039149

#SPJ4

when applied research is conducted in settings outside the laboratory,  the focus on a specific real world problem can be a problem.

The configuration and contents of laboratories are determined by the diverse needs of the specialists that work inside. A laboratory might have a particle accelerator or a vacuum chamber, whereas a metallurgy lab might have tools for casting, refining, or evaluating the strength of metals. A psychologist would utilise a room with one-way mirrors and covert cameras to examine behaviour in their lab, whereas a biologist or chemist might employ a wet laboratory. In laboratories, such as those where computer scientists typically operate, computers (and occasionally supercomputers) are sometimes utilised for either simulations or data processing. Scientists in other professions will continue to use a variety of labs. In laboratories, engineers build, assemble, and test technical objects.

The complete question is:

when applied research is conducted in settings outside the laboratory, which of the following can be a problem?

a. examines the basic laws of human behavior

b. is just as likely to occur in the laboratory as in the field

c. focuses on a specific real world problem

d. has no connection with theory

To learn more about laboratory click on the given link: https://brainly.com/question/28233400

#SPJ4

The next particles are CO2. which may have resonance

Resonance is a method for describing delocalized electrons inside particular molecules or polyatomic ions when the bonding cannot be captured by a single Lewis formula. Numerous resonance structures can be used to depict a molecule or an ion when the electrons are delocalized in this way.

What are resonance structures used for Resonance is a term used in valence bond theory to describe how different contributing structure (or forms, also called as resonance structures and canonical structures) come together to generate a hybrid resonance (and hybrid structure) in certain ions or molecules.

To know more about resonance visit:

https://brainly.com/question/11353835

#SPJ1

The enolates are the anions from the ketones. synthesis of 2-ethyl-2-hexenoic acid from alcohols of four carbons is :

butan - 1 - ol ------>    2-ethyl-2-hexenoic acid

The enolates ions will acts as a nucleophile in the SN²  reaction . The alkyl group will replace the alpha hydrogen and then the carbon carbon new bond is formed .  synthesis of 2-ethyl-2-hexenoic acid from alcohols of four carbons is given as :

CH₃ - CH₂ - CH₂ - CH₂ - OH + PCC  --- >  CH₃ - CH₂ - CH₂ - C - H

                                                                                                  ||

                                                                                                  O

+  NaOH ---->   CH₃ - CH₂ - CH₂ - CH = C - C - H

                                                                |      ||

                                                            C₂H₅   O

+ H₂CrO₄  ----->    CH₃ - CH₂ - CH₂ - CH = C - C - OH

                                                                    |      ||

                                                               C₂H₅   O

                                          2-ethyl-2-hexenoic acid

To learn more about 2-ethyl-2-hexenoic acid  here

https://brainly.com/question/15319080

#SPJ4

True, mechanism of action that will produce diuretic effect- increase the number of particles in the tubular fluid.

When the kidneys filter too much body fluid, it is called diuresis. As a result, you produce more urine and need to use the restroom more frequently. Diuresis may be brought on by specific medical disorders or by taking drugs that boost urine production. This illness can also be caused by lifestyle choices. Water tablets or diuretics are drugs that assist the body in eliminating extra fluid. They are frequently prescribed for illnesses like high blood pressure, chronic renal disease, and heart failure.

The kidneys are told to expel more water and salt via diuretics. This lessens edema and improves blood circulation throughout the body.

To know more about diuretics, click here,

brainly.com/question/14421191

#SPJ4

17.0g of potassium acetate is dissolved in 250.mL of a 0.30M aqueous solution of sodium chromate. The final molarity of acetate anion in the solution is 0.59 M.

The term "molar concentration" refers to the amount of a substance in a solution represented as a percentage of its volume. It is also used to refer to molarity, quantity concentration, or substance concentration. The most common unit used in chemistry to express molarity is the number of moles per liter, represented by the unit sign mol/L or mol/dm3 in SI units. One molar, or 1 M, of a solution's concentration is defined as one mol/L. Molarity is a unit of concentration used to describe chemical solutions (M). It is the number of moles of the solute in one liter of solution. This is not the same as the liters of solvent, to be clear (a common mistake). Despite being a useful unit, molarity has one fundamental flaw. Because temperature affects a solution's volume, it does not remain constant when it varies. Because you cannot directly measure solute in moles, you usually convert grams of solute to moles and then divide this amount by liters of solution.

To know more about molarity please refer: https://brainly.com/question/8732513

#SPJ4

The option among the given compounds that are the same compound is: Compounds 2 and 3

Th correct option is B.

Compounds are substances that are composed of two or more elements chemically combined together.

Compounds can be formed by the combination of two non-metals or a metal and a non-metal.

Compounds formed from the combination of two non-metals are covalent compounds.

Compounds formed from the combination of a metal and a non-metal are called ionic compounds since they form oppositely-charged ions.

Learn more about compounds at: https://brainly.com/question/26487468

#SPJ1

All of these reactions can potentially lead to a change in the hybridization of one or more carbon atoms, but the extent of the change and the specific details of the reaction will depend on the specific reaction being considered.

Oxidation of an alcohol to yield a carboxylic acid: This reaction typically involves the addition of an oxygen atom to the carbon atom that was bonded to the hydroxyl group in the alcohol, as well as the removal of two hydrogen atoms. This can result in a change in the hybridization of the carbon atom, depending on the specific alcohol being oxidized and the conditions of the reaction.

Neutralization of an amine using a strong mineral acid: This reaction typically involves the addition of a proton to the nitrogen atom in the amine, as well as the removal of a hydroxyl group. This can result in a change in the hybridization of the nitrogen atom, depending on the specific amine being neutralized and the conditions of the reaction.

Substitution of an aromatic ring using a halogen: This reaction typically involves the substitution of a hydrogen atom on the aromatic ring with a halogen atom. This can result in a change in the hybridization of the carbon atom bonded to the hydrogen atom that is replaced, depending on the specific aromatic compound and the conditions of the reaction.

Halogenation of an alkane: This reaction typically involves the substitution of one or more hydrogen atoms on an alkane with a halogen atom. This can result in a change in the hybridization of the carbon atoms bonded to the hydrogen atoms that are replaced, depending on the specific alkane and the conditions of the reaction.

Hydrolysis of an ester to yield an acid and an alcohol: This reaction typically involves the addition of a hydroxyl group to the carbon atom that was bonded to the ester group, as well as the removal of the oxygen atom that was bonded to the same carbon atom. This can result in a change in the hybridization of the carbon atom, depending on the specific ester being hydrolyzed and the conditions of the reaction.

Find more about Hybridisation

brainly.com/question/17102306

#SPJ4