Answer:
0.55g/L
Explanation:
Given parameters;
Mass of salt = 55g
Volume of water = 100L
Unknown:
g/L concentration = ?
Solution:
To solve this problem, we must understand that concentration is the amount of solute per solution
g/L concentration = [tex]\frac{55}{100}[/tex] = 0.55g/L
Between carbon and silicon, which element has the strongest attraction between its nucleus and its valence electrons? Explain?
Answer:
Between carbon and silicon, silicon element has the strongest attraction between its nucleus and its valence electrons.
because silicon's nucleus is bigger than carbon.silicon loses electrons easily than carbon.
What causes the wind and weather on earth plz help
1.004 mol Arsenic is how many atoms?
Answer: [tex]6.047\times 10^{23}[/tex] atoms in 1.004 mol of arsenic
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the atoms, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given atoms}}{\text {avogadro's number}}[/tex]
[tex]1.004=\frac{x}{6.023\times 10^{23}}[/tex]
[tex]x=1.004\times 6.023\times 10^{23}=6.047\times 10^{23}[/tex]
Thus there are [tex]6.047\times 10^{23}[/tex] atoms in 1.004 mol of arsenic
pleae help me I'm so confused
What is the velocity of a person that runs 40 km in 100 hours?
Answer:
0.4 km/h velocity is also the direction their going, in this case the person, that I'll name billy bob joe, is going in so yeh
Explanation:
give me brainliest?
How does the number of molecules in 1 mol of oxygen compare with the number of molecules in 1 mol of nitrogen?
1 mol of oxygen has fewer molecules.
1 mol of oxygen has more molecules.
Each sample has the same number of molecules.
The molecules cannot be compared without knowing the mass.
Answer:
Each sample has the same number of molecules.
Explanation:
Just took the quiz on edge 2021
Taking into account the definition of Avogadro's number, each sample has the same number of molecules.
Avogadro's NumberAvogadro's Number or Avogadro's Constant is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole of said substance. Its value is 6.023×10²³ particles per mole.
Avogadro's number applies to any substance.
This caseAvogadro's number applies to any substance. This means that the number of molecules in 1 mol of oxygen is equal to the number of molecules in 1 mol of nitrogen.
Finally, the correct answer is the third option: each sample has the same number of molecules.
Learn more about Avogadro's Number:
brainly.com/question/1445383
brainly.com/question/1528951
Can somebody Please Help
Answer:
5425440 μm
Explanation:
From the question given above,
Length (in ft) = 17.8 ft
Length (in μm) =?
Next, we shall convert 17.8 ft to in. This can be obtained as follow:
1 ft = 12 in
Therefore,
17.8 ft = 17.8 ft × 12 in / 1 ft
17.8 ft = 213.6 in
Next, we shall convert 213.6 in to cm. This can be obtained as follow:
1 in = 2.54 cm
Therefore,
213.6 in = 213.6 in × 2.54 / 1 in
213.6 in = 542.544 cm
Finally, we shall convert 542.544 cm to μm. This can be obtained as follow:
1 cm = 10⁴ μm
Therefore,
542.544 cm = 542.544 cm × 10⁴ μm / 1 cm
542.544 cm = 5425440 μm
Therefore, 17.8 ft is equivalent is equivalent to 5425440 μm
What is the product(s) in the reaction below?
Answer:
imma go with the answer B
The product in the reaction [tex]\rm Zn + 2HCl \rightarrow[/tex] is [tex]\rm ZnCl_2 + H_2[/tex]. The correct answer is option D.
A reaction is a process that involves the transformation of one or more substances into one or more different substances.
The reaction between zinc (Zn) and hydrochloric acid (HCl) is a classic example of a single displacement reaction. In this reaction, zinc reacts with hydrochloric acid to produce zinc chloride ([tex]\rm ZnCl_2[/tex]) and hydrogen gas ([tex]\rm H_2[/tex]).
The balanced chemical equation for this reaction is:
[tex]\rm Zn(s) + 2HCl(aq) \rightarrow ZnCl_2(aq) + H_2(g)[/tex]
Therefore, the product of the reaction between zinc and hydrochloric acid is zinc chloride ([tex]\rm ZnCl_2[/tex]) and hydrogen gas ([tex]\rm H_2[/tex]). Option D is the correct answer.
Learn more about reaction here:
https://brainly.com/question/16737295
#SPJ6
Brianna explains to Logan the role of plants in the carbon cycle. Choose the sentence(s) that she includes in her explanation. Select all that apply.
A.
Animals get carbon from plants.
B.
Plants take carbon from the soil.
C.
Photosynthesis uses carbon monoxide.
D.
Animals take carbon from the atmosphere.
E.
Plants take carbon from the atmosphere.
Answer:
E) Plants take carbon from the atmosphere
Explanation:
Plants are a vital part in keeping the air clean. They take in CO2, H2O, and sunlight to start processing photosynthesis. The carbon taken in by the plant still remains with it after it dies, thus, fossil fuels.
Answer:
e is correct
Explanation:
4. Which of the following have mass? Select all that apply.
O A neon-filled tube.
A diamond.
Water in a glass
The helium in a balloon.
Answer:
All except a diamond
Explanation:
The helium in the balloon has mass it fills the space its in.
The neon-filled tube has mass because it takes up space.
Water in a glass has mass because the water is taking up space.
A diamond does not because it does not take up space.
. The kidneys are _______________ to the liver.
a. Dorsal
b. Ventral
c. Medial
d. Superior
If you were to descend through the ocean in a submersible, what changes in the ocean water could you observe?
Answer:
it would become darker. there would be a higher level of water pressure. and there would be less animals, or different alimals.
Which of the following is not a property of most
transition metals?
Answer:
Low melting point
Explanation:
Transition metals have the following properties:
Conductivity (Electrical and Thermal)
Malleability (You can hit it with a hammer to mold it)
High melting point
Answer:
Low melting point
Explanation:
Most transition metals property is high melting point.
How many moles are in 9.07 x 10^23 atoms of sodium chloride?
Answer:
1.5 moles of sodium chloride are present.
Explanation:
Given data:
Number of moles of sodium chloride = ?
Number of atoms of sodium chloride = 9.07×10²³
Solution:
The given problem will solve by using Avogadro number.
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance. The number 6.022 × 10²³ is called Avogadro number.
1 mole = 6.022 × 10²³ atoms
9.07×10²³ atoms × 1 mol / 6.022 × 10²³ atoms
1.5 moles of sodium chloride are present.
What is one possible excited state configuration for fluorine? *
Answer:
Excited State Configuration: 1s^2 2s^2 2p^4 3s^1 are sperated by 13.00 eV.
How many grams are in 3.00 x 10^24 molecules of Zn(C2H3O2)2?
Answer:
Mass = 917.4 g
Explanation:
Given data:
Number of molecules = 3.00 ×10²⁴ molecules
Mass in gram = ?
Solution:
1 mole contain 6.022 × 10²³ molecules
3.00 ×10²⁴ molecules × 1 mol / 6.022 × 10²³ molecules
0.5×10¹ mol
5 mol
Mass in gram:
Mass = number of moles × molar mass
Mass = 5 mol × 183.48 g/mol
Mass = 917.4 g
what is the difference between polar and non-polar
Answer:
Polar molecules occur when there is an electronegativity difference between the bonded atoms. Nonpolar molecules occur when electrons are shared equal between atoms of a diatomic molecule or when polar bonds in a larger molecule cancel each other out.
Explanation:
Polar molecules occur when there is an electronegativity difference between the bonded atoms. Nonpolar molecules occur when electrons are shared equal between atoms of a diatomic molecule or when polar bonds in a larger molecule cancel each other out.
Describe how an adaptation may have allowed giraffes to survive in savanna ecosystems
In _____ , materials move from an area of higher concentration to an area of lower concentration through a cell membrane.
1.selective permeability
2.active transport
3.passive transport
PLS HELP THIS IS DUE TODAY!!
Answer:
I think it would be Yellow
How much energy is required to melt 2 kg of copper? Use the table below and
this equation: Q = mLfusion
A. 125.6 kJ
B. 9460 kJ
C. 414 kJ
D. 4730 kJ
Answer:
C. 414 kJ
Explanation:
Given parameters:
Mass of copper = 2kg
Unknown:
Amount of energy required to melt the copper = ?
Solution:
To solve this problem, we use:
Q = m L
m is the mass
L is the latent heat of fusion of copper = 207kJ/kg
So;
Q = 2 x 207 = 414kJ
Can someone answer ASAP if you hurry I will mark brainliest
Answer:
Electrical and magnetic
You exert a gravitational force on the pupil and the pupil exerts an equal gravitational force on you. ... The size of the gravitational force depends on the mass of the objects involved. The greater the mass, the greater the gravitational force.
Explanation:
Calculate the molar mass of NaNO3-
Write the name for the IONIC compound that contains two aluminum atoms and three sulfur atoms. (Need help ASAP)
what two types of evidence are used to classify organisms. Which animal shares the most traits with humans and do both lemurs and humans have the trait listed at Point D explain?
Explanation:
6.The main pieces of evidence that scientists use to classify organisms are essentially form and evolutionary relationships.
9. chimpanzee
10. The answer is no, lemurs are not bipedal, i.e, they don't use two legs for walking like human do and they don't have language like ours.
a sample of methane gas at a pressure of 0.727 atm and a temperature of 26.9 occupies a volume of 726 ml. if the gas is allowed to expand at constant temperature until its pressure is 0.412 atm, the volume of the gas sample will be _ mL
Answer:
1280L
Explanation:
Given parameters:
Initial pressure = 0.727atm
Temperature = 26.9°C
Initial volume = 726mL = 0.726L
New pressure = 0.412atm
Unknown:
New volume of the gas sample = ?
Solution:
To solve this problem, we apply boyles law;
P1V1 = P2V2
P and V are pressure and temperature
1 and 2 are initial and new state
0.727 x 0.726 = 0.412 x V2
V2 = 1.28mL = 1280L
i really need help with this question can you guys help me
1) Which electrons are involved in bonding between atoms?|
Answer:
VALENCE ELECTRONS are involved in the bonding of atoms
Explanation:
Hope that helps
Which of the following statements is true about the relationship between atoms and molecules? A. Most atoms are bonded together to make a molecule. B. An atom can be seen by scientists, but a molecule cannot. C. Atoms and molecules are the same and have no differences.
Answer:
I believe the answer is A. molecules are larger than atoms so they should be visible and atoms and molecules are indeed different
To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. Therefore, the correct option is option A.
What is atom?
Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.
In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron. Most atoms are bonded together to make a molecule. Molecules combine to form compounds.
Therefore, the correct option is option A.
To know more about atom, here:
https://brainly.com/question/13518322
#SPJ2
how does a diaphragm help in viewing the specimen in a microscope
Answer:
Diaphragm controls the amount of light reaching the specimen. It is located above the condenser and below the stage. Most high quality microscopes include an Abbe condenser with an iris diaphragm. Combined, they control both the focus and quantity of light applied to the specimen.
A chemist is studying the properties of a gas under various conditions. He observes that when the gas is at room temperature and low pressure, it behaves as an ideal gas. When the gas is cooled to 10 kelvin and is placed under high pressure, however, it deviates significantly from an ideal gas. Explain these observations
Answer:
An ideal gas is a theoretical concept and a real gas behaves in an ideal manner under conditions which includes a high temperature and a low pressure such that the gas has high kinetic energy, and the intermolecular forces between the molecules are weak
The Ideal Gas Law is P·V = n·R·T
Where;
P = The pressure of the gas
V = The volume of the gas
n = The number of moles of the gas
R = The Universal Gas Constant
T = The temperature of the gas
For a gas cooled to 10 Kelvin and placed under high pressure, the interaction between individual gas molecules increases, and the kinetic energy of the gases is much lower and more comparable to the inter molecular forces between the gas molecules, which in turn produces observable changes from the initial ideal behavior of the gas such that the gas behavior deviates from the Ideal Gas Laws appreciably and are better modelled by the Van der Waals Equations which takes into account, the volume the gas particles occupy and the intermolecular forces between the molecules
The Van der Waals equation is presented as follows;
[tex]P = \dfrac{R \cdot T}{V - b} - \dfrac{a}{V^2}[/tex]
Where;
V = The molar volume
a = The gas constant a represents the attractive forces between the gas particles
b = Represent the volume occupied by the particles of the gas
Explanation:
Answer: A, B, & C
Explanation:
A. The ideal gas model assumes that gas particles experience no intermolecular attractions and these forces cause the gas to deviate from ideal behavior.
B. At very low temperatures, gas particles move slowly.
C. At very high pressures, gas particles are very close together.
Got it right on edge :)
