1. A message signal m(t) has a bandwidth of 5kHz and a peak magnitude of 2V. Estimate the bandwidth of the signal u(t) obtained when m(t) frequency modulates a carrier with a) kf = 10 Hz/V, b) kf = 100 Hz/V, and c) kf = 1000 Hz/V.

Answer:

v² = u² + 2as

v² = 3600 + 6400

v² = 10000

v = 100

Explanation:

final velocity is 100 m/s

According to third equation of kinematics

[tex]\boxed{\sf v^2-u^2=2as}[/tex]

[tex]\\ \sf\longmapsto v^2=u^2+2as[/tex]

[tex]\\ \sf\longmapsto v^2=(60)^2+2(10)(320)[/tex]

[tex]\\ \sf\longmapsto v^2=3600+3400[/tex]

[tex]\\ \sf\longmapsto v^2=10000[/tex]

[tex]\\ \sf\longmapsto v=\sqrt{10000}[/tex]

[tex]\\ \sf\longmapsto v=100m/s[/tex]

Answer:

B = 0.013(-j) T

Explanation:

Given that,

The speed of a proton, [tex]v=1.75\times 10^7\ m/s[/tex]

Acceleration experienced by the proton,[tex]a=2.25\times 10^3\ m/s[/tex]

We need to find the magnitude and the direction of the magnetic field. At equilibrium,

[tex]ma=qvB\\\\B=\dfrac{ma}{qv}\\\\B=\dfrac{1.67\times 10^{-27}\times 2.25\times 10^{13}}{1.6\times 10^{-19}\times 1.75\times 10^{7}}\\\\B=0.013\ T[/tex]

The velocity is in +z direction, force in +x direction, then the field must be in -y direction.

Convert to m/s

[tex]\\ \sf\longmapsto v=20\times 5/18=5.5m/s[/tex]

We know

[tex]\boxed{\sf \omega=\dfrac{rv}{|r|^2}}[/tex]

[tex]\\ \sf\longmapsto \omega=\dfrac{0.5(5.5)}{|0.5|^2}[/tex]

[tex]\\ \sf\longmapsto \omega=\dfrac{2.75}{0.25}[/tex]

[tex]\\ \sf\longmapsto \omega=11rad/s[/tex]

Answer:

If a liquid is heated the particles are given more energy and move faster and faster expanding the liquid. The most energetic particles at the surface escape from the surface of the liquid as a vapour as it gets warmer. Liquids evaporate faster as they heat up and more particles have enough energy to break away

b. solve for Vo

[tex] vf ^{2} = vo^{2} + 2a(xf - xo) \\ vf ^{2} = vo ^{2} + 2axf - 2axo\\ vo ^{2} = vf ^{2} - 2axf + 2axo \\ vo = \sqrt{vf ^{2} - 2axf + 2axo } \\ vo = - \sqrt{vf^{2} - 2axf + 2axo } [/tex]

I hope I helped you ^_^

Answer:

the force decreases by a factor of 4

Explanation:

The expression for the law of universal gravitation is

          F = [tex]G \frac{m_1m_2}{r^2}[/tex]

let's call the force Fo for the distance r

          F₀ = [tex]G \frac{m_1m_2}{r^2}[/tex]

They indicate that the distance doubles

          r ’= 2 r

we substitute

          F = [tex]G \frac{m_1m_2}{(r')^2}[/tex]

          F = [tex]G \frac{m_1m_2}{r^2} \ \frac{1}{4}[/tex]

          F = ¼ F₀

consequently the correct answer is that the force decreases by a factor of 4

If the distance between two large masses are doubled, the gravitational force between them weakens by a factor of 4.

Let the initial force be F

Let the initial distance apart be r

Thus, we can obtain the final force as follow:

Initial force (F₁) = F

Initial distance apart (r₁) = r

Final distance apart (r₂) = 2r

F = GM₁M₂ / r²

Fr² = GM₁M₂ (constant)

Thus,

F₁r₁² = F₂r₂²

Fr² = F₂(2r)²

Fr² = F₂4r²

Divide both side by 4r²

F₂ = Fr² /4r²

From the illustration above, we can see that when the distance (r) is doubled, the force (F) is decreased (i.e weakens) by a factor of 4

Learn more: https://brainly.com/question/975812

All the answers are:

a) The time that will it take to rise to the highest point is 3.06 seconds.

b) The ball will rise to a height of 45.87 meters.

c) The time at which the ball will have a velocity of 10 m/s upward is 2.04 seconds.

The time when the ball has 10 m/s downward is 1.02 seconds.

d) The displacement of the ball will be zero at 6.12 seconds.

e) The time when the magnitude of the ball's velocity is equal to half its velocity of projection is 1.53 seconds.

f) The ball's displacement is equal to half the maximum height to which it rises after 0.90 seconds.

g) In each moment (upward and downward) the magnitude of the acceleration is the value of g (9.81 m/s²) and is a vector in the negative y-direction.

Let's calculate the values for each case.

a) At the highest point, the final velocity is 0, so we can use the following equation.  

[tex]v_{f}=v_{i}-gt[/tex] (1)

Where:

We know that v(i) = 30 m/s.

[tex]0=30-9.81t[/tex]

Solve it for t:

[tex]t=3.06\: s[/tex]

Hence, the time is 3.06 s.

b) At the highest point, the final velocity is 0, so we can use the following equation.  

[tex]v_{f}^{2}=v_{i}^{2}-2gh[/tex] (2)

[tex]0=v_{i}^{2}-2gh[/tex]

We know that the initial velocity is 30 m/s.

[tex]0=30^{2}-2gh[/tex]

Solving it for h we have:  

[tex]h=\frac{30^{2}}{2*9.81}[/tex]

[tex]h=45.87 \: m[/tex]

Then, the height is 45.87 m.

c) Using equation (1) we can find the time (t).

[tex]10=30-(9.81t)[/tex]

So, the time elapsed to get 10 m/s is:

[tex]t_{upward}=2.04\: s[/tex]

We know the upward time is equal to the downward time. So the time from v=10 m/s to v=0 m/s will be.

[tex]t_{upward}=2.04+t[/tex]  

[tex]t=1.02\: s[/tex]

This is the time when the ball has 10 m/s downward.          

Therefore, the time upward is 2.04 s, and the time downward is 1.02 s.

d) It will be when the ball returns to the ground.

[tex]t=2t_{upward}[/tex]

[tex]t=2*3.06[/tex]      

[tex]t=6.12\: s[/tex]

The displacement will be zero after 6.12 s.  

e) Here we need to find the time when v(f) is 15 m/s

[tex]15=30-gt[/tex]

[tex]t=\frac{15}{9.81}[/tex]  

[tex]t=1.53\: s[/tex]

The time when the v(f) is 15 m/s is 1.53 s.

f) Here, we need to find t when h = 45.87/2 m = 22.94 m

We can use the next equation:

[tex]h=v_{i}t-0.5gt^{2}/tex]

[tex]22.94=30t-0.5*9.81*t^{2}/tex]

Solving this quadratic equation, t will be:

[tex]t=0.90\: s/tex]

Hence, the ball's displacement is equal to half the maximum h, at 0.90 s.

g) In each moment the magnitude of the acceleration is the value of g (9.81 m/s²) and is a vector in the negative y-direction.

Learn more about vertical motion here:

https://brainly.com/question/13966860

I hope it helps you!

The aspect of the US justice system that has its roots in Jewish scripture is:

the idea that all people are subject to the same rules and laws.

It is the doctrine of "equality before the law."  Equality before the law means that every individual is equal in the eyes of the law, whether the individual is a lawmaker, a judge, a law enforcement officer, etc.  Equality before the law is also known as equality under the law, equality in the eyes of the law, legal equality, or legal egalitarianism.  It is a legal principle that treats each independent being equally and subjects each to the same laws of justice and due process.

Answer:

answer is C

the idea that all people are subject to the same rules and laws

Explanation:

hope this helps!

Explanation:

Hi Linda,

How's it going?

Sorry I haven't been in touch for such a long time but I've had exams so I've been studying every free minute. Anyway, I'd love to hear all your news and I'm hoping we can get together soon to catch up. We just moved to a bigger flat so maybe you can come and visit one weekend?

How's the new job?

Looking forward to hearing from you!

Helga

Answer:

The unit of the time constant RC is the second

Explanation:

The unit of resistance, R is the Ohm, Ω and resistance, R = V/I where V = voltage and I = current. The unit of voltage is the volt, V while the unit of current is the ampere. A.

Since R = V/I

Unit of R = unit of V/unit of I

Unit of R = V/A

Ω = V/A

Also, The unit of capacitance, C is the Farad, F and capacitance, F = Q/V where Q = charge and V = voltage. the unit of charge is the coulomb, C while the unit of voltage is the volt, V

Since C = Q/V

Unit of C = unit of Q/unit of V

Unit of C = C/V

F = C/V

Now the time constant equals RC.

So, the unit of the time constant = unit of R × unit of C = Ω × F = V/A × C/V = C/A

Also. we know that the  1 Ampere = 1 Coulomb per second

1 A = 1 C/s

So, substituting 1 A in the denominator, we have

unit of RC =  C/A = C ÷ C/s = s

So, the unit of RC = s = second

So, the unit of the time constant RC is the second

Answer:

B has greater potential

Explanation:

We know;

Potential Energy (PE) = mgh

where, m=mass of body

g=acceleration due to gravity

h=height of body

From the formula,

PE is directly proportional to the mass of the body

so the body with greater mass has greater potential.

Answer:

salt

Explanation:

salt is a component for many acid base reactions

Answer:

[tex]F_r=0.132:0.25[/tex]

Explanation:

From the question we are told that:

[tex]M_1=M*\frac{1}{6.334}[/tex]

Therefore

[tex]M_2=M-M*\frac_{1}{6.334}[/tex]

[tex]M_2=M*\frac{5.334}{6.334}[/tex]

Generally the equation for Gravitational force of attraction is mathematically given by

For Unequal split

[tex]F=\frac{GM_1M_2}{d^2}[/tex]

[tex]F=\frac{G(M*\frac_{1}{6.334})(M*\frac{5.334}{6.334})}{d^2}[/tex]

[tex]F=\frac{GM^2}{d^2}*(0.132)[/tex]

For equal split

[tex]F=\frac{GM_1M_2}{d^2}[/tex]

[tex]F=\frac{G(\frac{M}{2})((\frac{M}{2}}{d^2}[/tex]

[tex]F=0.25 \frac{GM^2}{d^2}[/tex]

Therefore the ratio of the gravitational force is

[tex]F_r=0.132:0.25[/tex]

Answer:

valance electrons are shared between oxygen atoms.. making them have eight in the outer most shells.

I hope this helps

The letter that represents the location of Puerto Rico on the map is A.

As the question noted, Puerto Rico is to the southeast of the United States. The first step therefore, would be to find the United States.

The United States is located in the center of the map and is painted orange. I have highlighted it in the attachment.

A place that is southeast of the United States would be both:

The only place matching that description is labeled A so we can conclusively say that Puerto Rico is labeled the place labeled A.

For more information on Puerto Rico check https://brainly.com/question/23481183.

Answer:

its a im puerto rican so i know it is a

Explanation:

give the guy below brain award

The length of the brass at a temperature rise of 100 K is 2.0036 m

From the question given above, the following data were obtained:

Original length (L₁) = 2 m

Temperature rise (ΔT) = 100 K

Coefficient of linear expansion (α) = 18×10¯⁶ K¯¹

The final length of the brass can be obtained as follow:

α = L₂ – L₁ / L₁ΔT

18×10¯⁶ = L₂ – 2 / (2 × 100)

18×10¯⁶ = L₂ – 2 / 200

Cross multiply

L₂ – 2 = 18×10¯⁶ × 200

L₂ – 2 = 0.0036

Collect like terms

L₂ = 0.0036 + 2

L₂ = 2.0036 m

Thus, the length of the brass at a temperature rise of 100 K is 2.0036 m

Learn more: https://brainly.com/question/21983527

Answer:

x = 0.9 m

Explanation:

For this exercise we must use the rotational equilibrium relation, we will assume that the counterclockwise rotations are positive

          ∑ τ = 0

          60 1.5 - 78 1.5 + 30 x = 0

where x is measured from the left side of the fulcrum

           90 - 117 + 30 x = 0

           x = 27/30

           x = 0.9 m       

In summary the center of mass is on the side of the lightest weight x = 0.9 m

Answer:

A boat having stones floats in water. If stones are unloaded in water, what will happen to the level of water?​

Explanation:

Answer:

[tex]_{18}^{39} } Ar[/tex]

Explanation:

The given equation shows the disintegration of an unstable isotope of chlorine to beta particle and Argon nucleus. The nucleus undergoes the emission of a beta particle to form a more stable nucleus of Argon.

[tex]_{17} ^{39} Cl[/tex] ⇒ [tex]_{-1}^{0} e[/tex] + [tex]_{18}^{39} } Ar[/tex]

Argon is a stable gas and is found in the group 8 on the periodic table of elements.

Answer:

Answer is below

Explanation:

39 18 Ar

Answer:

Explanation:

(a)Solving for the acceleration of the bullet

acceleration = (vf^2 – vi^2) / 2d

acceleration = ((280 m/s)^2 – (420 m/s)^2) / (2 * 0.12 m)

acceleration = (78400 - 176400) / 0.24 m

acceleration = -98000 / 0.24

acceleration = -408333 m/s^2

(a)Solving for contact time with board

t^2 = 2d/a

t^2 = 2 * 0.12 m / 408333 m/s^2

t^2 = 0.24 m / 408333 m/s^2

t^2 = 5.8775558 x 10^-7

t = 0.0007666 s or 767 microseconds

Answer:

From far away, Saturn looks like it has seven large rings. Each large ring is named for a letter of the alphabet. The rings were named in the order they were discovered.

Answer:

OD. The process of cutting down irrelevant information so only the information that is useful for particular purpose remains

Abstraction is the process of cutting down irrelevant information so only the information that is useful for a particular purpose remains.

Abstraction is the practice of removing anything from a set of core features by eliminating or deleting attributes.

One of the three core ideas of object-oriented programming is abstraction order to decrease complexity and maximize efficiency, a programmer uses abstraction to conceal all but the important facts about an object.

Abstraction is the process of cutting down irrelevant information so only the information that is useful for a particular purpose remains.

Hence option D is correct.

To learn more about the abstraction refer to the link;

https://brainly.com/question/13072603

Answer:

0.37 m

Explanation:

Given :

Window height, [tex]h_1[/tex] = 1.27 m

The flowerpot falls 0.84 m off the window height, i.e.

[tex]h_2[/tex] = (1.27 x 0.84 ) m in a time span of [tex]$t=\frac{8}{30}$[/tex]   seconds.

Assuming that the speed of the pot just above the window is v then,

[tex]h_2=ut+\frac{1}{2}gt^2[/tex]

[tex]$(1.27 \times 0.84) = v \times \left( \frac{8}{30} \right) + \frac{1}{2} \times 9.81 \times \left( \frac{8}{30} \right)^2$[/tex]

[tex]$v=\left(\frac{30}{8}\right) \left[ (1.27 \times 0.84) - \left( \frac{1}{2} \times 9.81 \times \left( \frac{8}{30 \right)^2 \right) \right]}$[/tex]

[tex]$v= 2.69$[/tex] m/s

Initially the pot was dropped from rest. So,  u = 0.

If it has fallen from a height of h above the window then,

[tex]$h = \frac{v^2}{2g}$[/tex]

[tex]$h = \frac{(2.69)^2}{2 \times 9.81}$[/tex]

h = 0.37 m

Answer:

Displacement

General Formulas and Concepts:

Kinematics

Explanation:

Displacement is the difference between the start position and end position.

Total Distance is the entire distance traveled between the start and end position.

Topic: AP Physics 1 Algebra-Based

Unit: Kinematics

Answer:

[tex]\omega=3.135rad/s[/tex]

Explanation:

From the question we are told that:

initial Speed [tex]V_1=2.50[/tex]

Mass [tex]m=70.0kg[/tex]

Center of mass [tex]d=0.0.800m\[/tex]

Generally the equation for angular velocity is is mathematically given by

[tex]\omega=\frac{v}{r}\\\\\omega=\frac{2.50}{0.0800}[/tex]

[tex]\omega=3.135rad/s[/tex]

Answer:

Un objeto se encuentra en equilibrio físico si la fuerza neta que se le aplica es igual a 0.

En este caso solo se aplican fuerzas en el eje horizontal, por lo que las podremos sumar directamente.

La persona A aplica una fuerza:

Fa = -3N

La persona B aplica una fuerza:

Fb = 5N

La persona C aplica una fuerza Fc, la cual aún no conocemos.

Pero sabemos que la caja está en equilibrio físico, por lo que:

Fa + Fb + Fc = 0N

reemplazando los valores que conocemos, obtenemos:

-3N + 5N + Fc = 0N

Ahora podemos resolver esto para Fc, la fuerza que aplica la persona C.

Fc = 0N + 3N - 5N

Fc = -2N

Podemos concluir que la persona C aplica una fuerza horizontal de -2N

Answer:

Language -English plz I cant understand

Answer:

10.01 cm

Explanation:

Given that,

The time delay between transmission and the arrival of the reflected wave of a signal using ultrasound traveling through a piece of fat tissue was 0.13 ms.

The average propagation speed for sound in body tissue is 1540 m/s.

We need to find the depth when the reflection occur. We know that, the distance is double when transmitting and arriving. So,

[tex]v=\dfrac{2d}{t}\\\\d=\dfrac{vt}{2}\\\\d=\dfrac{1540\times 0.13\times 10^{-3}}{2}\\\\d= $$0.1001\ m[/tex]

or

d = 10.01 cm

So, the reflection will occur at 10.01 cm.

Answer:

For infrared and ultraviolet waves have different frequencies. Both types of wave can have harmful effects on human beings. Describe the harmful effects of infrared and ultraviolet waves, relating them to the frequencies of the waves. Medical studies indicate that prolonged IR exposure can lead to lens, cornea and retina damage, including cataracts, corneal ulcers and retinal burns, respectively. To help protect against long-term IR exposure, workers can wear products with IR filters or reflective coatings.When you look at the EM spectrum, UV waves are quite a bit smaller in wavelength than infrared, and x-rays/gamma rays are even smaller. Therefore, UV waves are probably causing more harm than infrared waves, and x-rays/gamma rays are probably doing even more damage.

                                              Thank You  

                                     Please mark me Brainliest

Infrared and ultraviolet waves have different frequencies. Infrared waves have lower frequencies and longer wavelengths, while ultraviolet waves have higher frequencies and shorter wavelengths.

Harmful effects of Infrared waves:

Infrared waves have lower frequencies and are often associated with heat radiation. Prolonged exposure to intense infrared radiation can lead to thermal burns and damage to the skin and eyes. Infrared radiation can also cause dehydration and overheating of the body, especially in hot environments. While infrared radiation is not as harmful as ultraviolet radiation, excessive exposure can still lead to health issues.

Harmful effects of Ultraviolet waves:

Ultraviolet waves have higher frequencies and shorter wavelengths, making them more energetic than infrared waves. UV radiation from the sun is a well-known harmful agent. Short-term exposure to intense UV radiation can cause sunburn, skin redness, and eye irritation. Long-term exposure to UV radiation can lead to more serious health problems such as skin aging, cataracts, and an increased risk of skin cancer. UV radiation can also damage DNA in skin cells, leading to mutations and potential carcinogenesis.

It is essential to protect ourselves from both infrared and ultraviolet waves to prevent harmful effects. Using sunscreen and wearing protective clothing can help shield the skin from UV radiation. Limiting exposure to intense sources of infrared radiation, such as hot objects or infrared heaters, can help reduce the risk of thermal burns and overheating. Understanding the differences in the frequencies of these waves allows us to implement appropriate safety measures and protect our health.

To learn more about Infrared and ultraviolet waves, here

https://brainly.com/question/3091095

#SPJ2

Answer:

he is a baby art and design