1. A vehicle of mass 1500 kg braked to a standstill from a
velocity of 24 m/s in 12 s.
i. Show that the deceleration of the vehicle was 2.0 m/s2.
ii. Calculate the resultant force on the vehicle.

A fixed mass of gas has a volume of 25 [tex]cm^3[/tex], the pressure of the gas is 100 kPa, the volume of the gas is slowly decreased by 15 [tex]cm^3[/tex] at a constant temperature, and the change in pressure of the gas is 150 kPa, which is option b.

PV = nRT (P= pressure of the gas, V =volume, n = number of moles of gas, R = gas constant, and T =temperature of the gas in kelvin)

Suppose the gas is an ideal gas and that the temperature is constant,

P1V1 = P2V2

Here P1 = 100 kPa, V1 = 25 [tex]cm^3[/tex], V2 = 10 [tex]cm^3[/tex],

100 kPa x 25 [tex]cm^3[/tex] = P2 x 10 [tex]cm^3[/tex]

P2 = (100 kPa x 25 [tex]cm^3[/tex]) / 10 [tex]cm^3[/tex]

P2 = 250 kPa

the change in pressure of the gas is,

ΔP = P2 - P1 = 250 kPa - 100 kPa = 150 kPa

The reason is that when the volume of a fixed mass of gas is decreased, the pressure of the gas increases proportionally, so here assuming that the temperature is constant it is calculated.

Hence, the volume of the gas is slowly decreased by 15 [tex]cm^3[/tex] at a constant temperature, and the change in pressure of the gas is 150 kPa, which is option b.

Learn more about the calculation of the change in pressure here.

https://brainly.com/question/15938504

#SPJ1

Answer:

Kayla. You can calculate it using the formula for momentum: momentum=mass×velocity and find the bigger number between the two momentums

By Newton's second law, the net force acting on the crate parallel to the surface is

∑ F = mg sin(10°) - 800 N = ma

where m = 500 kg is the mass of the crate and a is the acceleration.

Solve for a :

a = ((500 kg) (9.80 m/s^2) sin(10°) - 800 N) / (500 kg)

a ≈ 0.102 m/s^2

Answer:

I am not sure if this is the answer

acceleration: 2.2m/s

Explanation:

here

initial velocity(u): 11m/s

Final velocity(v): 33m/s

time taken(t): 10 s

now

a:v-u/t

or

acceleration:final velocity-initial velocity/time taken

or

a: 33-11/10

or

a:22/10, divide it

: a=2.2m/s#

Answer:

a. 2:3

b. The data illustrates the law of multiple proportions by showing that the the masses of oxygen that reacts with a fixed mass of sulfur are in a ratio of small whole numbers

Explanation:

The weight of oxygen that combines with 32.06 grams of sulfur in sulfur dioxide = 32 grams

The weight of oxygen that combines with 32.06 grams of sulfur in sulfur trioxide = 48 grams

a. The ration of the weights of oxygen that combine with 32.06 g of sulfur = 32:48 = 2:3

b. The law of multiple proportions states that when two elements are able to interact chemically to form more than one compound, then the (different) weights of one of the element that combines with a fixed weight of the other element are in small whole number ratios

The data demonstrates the law of multiple proportions by showing that the ratios of the weights of oxygen that combine with a fixed weight of sulfur to form sulfur dioxide and sulfur trioxide is in the ratio of 2 to 3 which are small whole number ratios

Answer:

7.5 J

Explanation:

To answer the question given above, we need to determine the energy that will bring about the speed of 1 m/s. This can be obtained as follow:

Mass (m) = 15 Kg

Velocity (v) = 1 m/s

Energy (E) =?

E = ½mv²

E = ½ × 15 × 1²

E = ½ × 15 × 1

E = ½ × 15

E = 7.5 J

Therefore, to change the speed to 1 m/s, the employee must do a work of 7.5 J.

Answer:

Option C

Explanation:

Diverging lens are negative lens as they have negative focal length. Their

magnification is smaller than one.

They produce virtual image in which the refracted rays extended back in order to meet

Hence, option C is correct

Answer:

Explanation:

This is a classic Law of Momentum Conservation problem. For us the equation will look like this:

[tex][(m_yv_y+m_bv_b)]_b=[(m_y+m_b)v_{both}]_a[/tex] Filling in with our given info:

[tex][(70.0)(0)+(.40)(10.0)]_b=[(70.0+.40)v_{both}]_a[/tex] and

4.0 = 70.4v and

v = .06 m/s

Explanation:

[tex]C.) \: Conduction \: \\ \\ = > it \: is \: a \: process \: of \: transferring \: \\ \\ of \: heat \: from \: one \: object \: to \: another \\ \\ when \: they \: are \: in \: contact \: [/tex]

By the conduction process the heat reaches the pin.Option C is correct.

The term "heat transfer" refers to the movement of heat. The flow of heat across a system's boundary is due to a temperature differential between the system and its surroundings.

Conduction is the type of heat transfer occurs mainly in solid or by contact.In the given condition the rod is then heated continuously at one end and the pins fall off in the order 4, 3, 2, 1​.

By the conduction process the heat reaches the pin.

Hence option C is correct.

To learn more about the heat transfer refer to the link;

https://brainly.com/question/13433948

#SPJ2

Answer: True

Explanation:

Answer:

The iron bolt is attracted to the electromagnet. The force of attraction between the electromagnet's core and the iron bolt is greater than the force of the spring, so the iron bolt is pulled out of its housing in the door

Explanation:

Answer:

Acceleration is the rate of change of velocity. What is commonly said as ‘ten meter per second squared’ can bee broken down into ‘ten meter per second per second.’ This gives us the true meaning of the term acceleration.

Just like ‘ten meter per second’ means increasing the displacement by ten meters every second, ‘ten meter per second per second’ means increasing the velocity by ten meters per second every second.

So, basically if you consider the case of a free fall motion, where ‘t’ stands for time and ‘v’ stand for velocity at that instant:

At,

t=0, v=0 m/s

t=1, v=0+10 m/s;

t=2, v=0+10+10 m/s;

t=3, v=0+10+10+10 m/s;

This can also be thought as a Arithmetic Progression where common difference ‘D’ is the acceleration(a), since it adds a 10 m/s to velocity every second and the first term ‘A’ stands for the initial velocity (u). Using this approach we can derive to the first equation of motion:

v = u + at

Hope this Answer Helps!!

Explanation:

plz mark me as a brainlest and thank my answer

It means that the vehicle's speed increases at the rate of 10m/s every second.

At any time, it's speed is 10 m/s faster than it was 1 second earlier.

Answer:

Explanation:

[tex]h=-v^2 /2g[/tex]

[tex]with\\g = 9,8 m/s^2 or 10 m/s^2[/tex]

[tex]h= (-13)^2 / 2 * 9,8 = 8,6[/tex]

Answer:

The beta decay takes place.

Explanation:

The reaction of radioactivity of carbon 14 to nitrogen 14 is

There is a beta decay.  

The reaction is

[tex]C_{6}^{14}\rightarrow N_{7}^{14}+\beta _{-1}^{0}+ energy[/tex]

Here some energy is released in form of neutrino.

Answer:

Speed = 1.6 m/s

Explanation:

Formula,

Speed = Distance ÷ Time

Answer:

vận tốc bằng quãng đường chia thời gian

Explanation:

v=s/t

Answer:

3. ultraviolet and x rays

The two forms of electromagnetic energy are used to produce the most spectacular fluorescence when placed in darkness are ultraviolet and x rays.

Electromagnetic radiation is waves of the electromagnetic field, propagating through space, carrying electromagnetic radiant energy. It includes radio waves, microwaves, infrared, light, ultraviolet, X-rays, and gamma rays.

Fluorescence is the process in which a substance absorbs light at a high energy, short wavelength and emits light at a lower energy, usually visible wavelength.

Ultraviolet rays is a type of electromagnetic waves in which the wavelength is shorter than visible rays. It is responsible for 10% of sunlight and causes sun tan. It is used to purify water in water purifiers. It kill germs.

X rays lies beyond ultraviolet rays. It is used to diagnose in medical field. It can destroy living tissues so excessive exposure should be limited to reduce harmful effect.

The color change of fluorescent minerals is most spectacular when the minerals are placed in darkness and exposed to electromagnetic energy shorter than visible light.

Ultraviolet and x rays are shorter than visible light so they exhibit fluorescent property.

To learn more about Electromagnetic radiation here

https://brainly.com/question/10759891

#SPJ2

Answer:

33.33j+6.67i km/hr

Explanation:

From the law of conservation of momentum,

Applying,

mu+m'u' = V(m+m')............... Equation 1

Where m = mass of the truck, m' = mass of the car, u = initial velocity of the truck, u' = initial velocity of the car, V = Final velocity.

Note: let j represent the north, and i  represent the east

From the question,

Given: m = 1500 kg, u = 60j, m' = 1200 kg, u' = 15i

Substitute these values into equation 1

1500*60j+1200*15i = V(1500+1200)

90000j+18000i = 2700V

V = (90000j+18000i)/2700

V = 33.33j+6.67i km/hr

hope this helps

Answer:

If a person is pushing a desk across the room, then there is an applied force acting upon the object. The applied force is the force exerted on the desk by the person.

answer = 33.4 net force.

Answer:

40 degrees Celsius

Explanation:

Have a great summer :)

Answer:

Dynamo

Explanation:

Dynamo started to rotate which is known as kinetic energy.When dynamo is in running it produces electricity.dynamo specially used for generating electricity.

Fundamental

forming a necessary base or core; of central importance.

"the protection of fundamental human rights"

Answer:

313kelvin

Explanation:

40 degree celcius plus 273=313K

Explanation:

Glass is the best sound absorber material.

Answer:

Figure is not there

Explanation: