Answer:
B. Increasing temperature.
Explanation:
Atmospheric pressure increases with increasing temperature because warm air causes the atmospheric pressure to rise.
Basically, when the molecules contained in air experience a collision, they usually exert forces on one other, and when these molecules become heated, they experience a quick and rapid motion leading to an increased rate of collision. Therefore, as more force is being exerted on the air molecules, the atmospheric pressure tends to rise or increase.
A problem at work must be handled the same way as a personal conflict.
Please select the best answer from the choices provided.
ОТ
F
Answer:T
Explanation:
i feel like it doesn't have enough info
The two blocks shown below have masses m1 = 400 g and m2 = 600 g. They are connected by a string and lie on a frictionless tabletop. A 3.5 N force is applied to block m2, pulling it to the right. Find the acceleration then find the tension force in the string between two objects
What is your average speed if you walk 2 kilometers in 20minutes
Answer:
12 km/hr
Explanation:
Speed= Distance/Time
Answer:
12km/h
Explanation:
average speed= Distance covered /time taken
average speed=2km/20minutes
=but 1 minutes is 60 seconds
=2km/60minutes
=12km/h
The difference between temperature and thermal energy is that___________.
Answer:
Heat vs temperature - Energy Education The core difference is that heat deals with thermal energy, whereas temperature is more concerned with molecular kinetic energy. Heat is the transfer of thermal energy, whereas temperature is a property the object exhibits.
Have you ever noticed that how much electrical energy is consumed by electrical appliances in your home. Make a chart of all of these appliances with their power in kW and an average use on daily, weekly, and monthly basis. Usually the electrical power is written on most of the appliances or on their packing. Calculate the total consumption of electrical energy in kWh in your home for December, 2020. Find the expected electricity bill for this month, if 1 kWh energy costs Rs 10. Which item consumed most energy during the month
Answer:
A. The expected electricity bill for this month is Rs 18,896.2
B. The item which consumed the most energy during the month is the electric cooker with a total consumption of 1,110Kw/Month
Explanation:
Step 1 - Identify electrical appliances
I only have 8 electrical appliances in my home.
Electric Cooker. Its power rating 3000 Watts (that is 3Kw/h)Refrigerator. Its power rating is 150 Watts (that is 0.15Kw/h)Waterheater. Its power rating is 4000 Watts (that is 4Kw/h)Electric Iron. Its power rating is 1000 Watts (that is 1Kw/h)Led TV. Its power rating is 235 watts (that is 0.235Kw/h)13 Energy-saving Light bulbs at 60 watts which is a total of 780 watts (which is 0.78Kw)Electric Standing Fan. Its power rating is 55 watts (that is 0.055Kw)Washing machine. Its power rating 255 watts (that is 0.255Kw)Step 2 - Assign usage per hour and calculate wattage used /month
The Electric Cooker is used an average of 9 hours/day. This is 270hours/month. Total Kw used per month 3Kw * 270hours = 1,110Kw/MonthThe refrigerator is used 24 hours. That is 0.15Kw *24*30days= 108Kw/MonthThe water heater is used 1 hour every day. That is 4Kw *30days = 120Kw/MonthThe electric Iron is used for 20 Minutes every day.That is 1Kw * 0.34hr *30= 10Kw/MonthThe Led Tv is used for 12hours/day. That is 0.235Kw*12*30=84.6Kw/monthThe bulbs are used for about 18hours/day. That is 0.78kw*18*30= 421.2Kw/monthThe electric standing fan is used for about 18 hours/day. That is 0.055kw*18*30=29.7Kw/monthThe washing machine is used for about 6 hours/week. That is 0.255Kw*4*6=6.12Kw/month
Step 3 - Add up all the Kw used per month and multiply by the cost of 1 Kw
Total Kilowatt Consumed/Month = 1110 +108+120+10+84.6+421.2+29.7+6.12
= 1,889.62Kw/Month
Total cost of energy consumed per month = 1889.62 * Rs 10
= Rs 18,896.2
Cheers!
Write a message to Mr. Chang explaining why the groundwater heating system will warm the school more than the water heater system. Use evidence to support your claim. For each piece of evidence you use, explain how the evidence supports your claim.
Answer:
For, heating purposes more the quantity of water more will be the heating. Clearly, underground heating would have more water and hence, it will have edge over the water heater system.
Moreover, for things at the same temperature, the thing with more molecules has more total kinetic energy (thermal energy) than the thing with fewer molecules. The groundwater heating system uses heat from the heat stored naturally in groundwater or aquifers. Thus, saving the cost of power required to heat in normal water heater.
Explanation:
The groundwater heating system will warm the school more than the water heater system due to the fact that it uses more water more than the other system.
Based on the complete question, it should be noted that the addition of energy leads to an increase in motion which results in the rise in temperature.
The groundwater heating system will warm the school more than the water heater system due to the fact that it uses more water more than the other system even though its water isn't as warm as in the other system.
Read related link on:
https://brainly.com/question/20116115
Help Please! 5 questions for 25 points? seems fair? Thank you!
Answer:
1. where the skater turns and goes back in the opposite direction- point w
2. gravitational force of the object
3. point a
4. the bar representing sphere 4 should be twice as tall as the bar representing sphere 2
5. B; its mass is smaller (?)
yolo
Answer:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Explanation:
What must happen to an object in order to accelerate it?
Answer:
For an object to accelerate, appropriate force must be applied to the object to cause it to change it’s velocity if it’s already in motion. However, to cause it to overcome static friction if it is at rest, and cause it to change it’s velocity
Explanation:
Which statement explains what happened next? Positive feedback caused his pancreas to stop secreting insulin. Negative feedback caused his pancreas to stop secreting insulin. Negative feedback caused his pancreas to produce more insulin. Positive feedback caused his pancreas to produce more insulin.
Answer:
Negative feedback caused his pancreas to produce more insulin.
Explanation:
Positive feedback is a feedback that causes an increase of product as a result of change while negative feedback is a feedback that causes a decrease in product as a result.
Negative feedback mechanism can be shown in the body as the control of blood sugar. The blood sugar is the product to be controlled. When there is an increase in blood sugar, the nerves sense a change. This change leads to secretion of insulin by the pancreas until homeostasis and then the secretion stops.
Answer:
negative feedback cause his pancreas to stop secreting insulin.
Explanation:
What is the formula for Charles Law?
Answer:
Explanation:
V_{1} = first volume
V_{2} = second volume
T_{1} = first temperature
T_{2} = second temperature
10 POINTS QUESTION: Why both are models for monomers, polymers, and cross-linked polymers
Answer:
Because both monomers and polymers and cross linked polymers are mers with physically properties which is good for applycations
Explanation:
because they are good for using and not using
also, this is a 5 point question, you are not fooling anyone. thx for 5 points tho
which unit would be most
suitable for its scale?
Answer:
down below
Explanation:
for a scale, kg is used, as well as grams
for force, newtons is used
How much potassium nitrate (KNO3) would dissolve in 50 milliliters of water at 45ºC given that 55g of KNO3 is dissolved in 150mL of water at 45°C.
A. 19.7g
B. 15.1g
C. 18.3g
D. 23.3g
Why does a concave lense always form a virtual image?
Answer:
Concave lens spreads out light rays that are then refracted through it.: A concave mirror or a converging lens will only produce a virtual image at a point if the image is located beyond the focal point. By the focal point, we define the point that is more than one focal length away.
If an oceanic plate and a continent plate converge, or push towards each other, which plate will sink under the other one?
Answer:
The oceanic plate will sink under
Explanation:
Due to erosion over time and the sudden shift, the continental plate will rise causing earthquakes, tsunami’s, etc..
A car traveled 1,215 km West from El Paso to Dallas in 13.5 hours. What was its velocity?
A. 90m/s West
B. 90km/h
C. .09km/h West
D. 90km/h West
Answer:
D. 90km/hr due West
Explanation:
Given parameters:
Displacement = 1215km
Time = 13.5hr
Unknown:
Velocity = ?
Solution:
Velocity is the displacement divided by the time taken;
Velocity = [tex]\frac{displacement}{time}[/tex] = [tex]\frac{1215km}{13.5hr}[/tex] = 90km/hr
Velocity is 90km/hr due West
Velocities of two bodies A and B are given in vectors notation as va =i+2j-3k and Vb=3i+2j-k what will be the relative velocity of b with respect to a?
Answer:
[tex]V_{B/A}=2i+2k[/tex]
Explanation:
The relative velocity can be calculated by means of the difference between vector B minus vector A.
[tex]V_{A}=i+2j-3k\\V_{B}=3i+2j-k\\V_{B}-V_{A}=(3-1)i + (2-2)j+(-1-(-3))k\\V_{B/A}=2i+2k[/tex]
The density of molten lava increases as the lava cools and hardens. Give other examples of natural change in density
Answer:
When the water is frozen it turns to ice and the density decreases.
Explanation:
Have A Wonderful Day !!
define specific heat capacity
According to Einstein's famous formula, the relationship between mass and energy can be written E = M ∙ c2, where E = energy in joules, m = mass in kilograms and c = speed of light in meters per second. Sweden's annual energy use amounts to approximately 1.35 ∙ 10 up tp 18J. Suppose that all this energy could be created by converting matter into energy. If so, how much mass would be needed to cover the country's annual energy use?
The speed of light is 3 ∙ 10 up to 8 m / s
Answer:
the amount of mass needed is: 4.5 10^9 kg
Explanation:
Use the given equation:
E = m * c^2
with E = 1.35 * 10^(18) J
and c = 3 * 10^8 m/s
and solve for the mass as shown below:
m = 1.35 * 10^(18) / 3 * 10^8 ≈ 4.5 10^9 kg
find the cp of an article which is sold for rupees 4048 , thereby , making a profit of 15 percent
Answer:
4048 = 115x/100.
Explanation:
Profit P = (15/100) X x.
P= 15x/100.
15x/100 = 4048- x.
4048 = 15x/100 + x.
4048 = 115x/100.
I think this is physics?
A student wants to calculate the density of the two objects shown below:
A Metal Cube and a Small Statue.
Describe the methods that the student should use to calculate the densities of the two objects.
ASAP please this piece of work is already late XD
Answer:
Okay
Explanation:
First we should quickly remind ourselves of the equation for density:density= mass/ volumeTo calculate the density we need a method of measuring the mass of each object and another method for measuring the volume of each object. To measure the mass in both cases we can simply use a measuring balance. To measure the volume we will need to use 2 separate methods. For the cube we can simply measure the length, height and depth with a ruler, multiply our measurements and we obtain the volume. The statue is a little more tricky because it has an irregular shape so we can't use the ruler anymore. Instead we should use graduated tank/trough of water. First of all measure the amount of water in the tank before putting in the statue. Then submerge the statue in the water and take another measurement of the volume of water in the tank. The statue will displace the water in the tank giving a higher value. We finally subtract the initial volume from the final volume and we should obtain the volume of the statue.We now have all the measurements necessary to calculate the density of both objects!
A softball and a baseball are launched from 2 different pitching machines at the same time.
th
Softball
182 g
165 m/sec
Baseball
143 g
112 m/sec
Which of these BEST explains what factors give the baseball and softball different velocities?
O mass and speed
O mass and direction
O speed and direction
O size and mass
Derive Isothermal process through ideal gas.(anyone plzz!!)
Answer:
Hey, bro here is the explanation....
Explanation:
Hope it helps...
this is a voice recording of the text of a book that you listen rather than read.
You slide a 15 kg box down a ramp with friction set to an angle of 38°. If the height of the ramp is 1.2 m, what's the frictional force on the box as it gets to the bottom of the ramp if the applied force down the ramp is 52 N?
Answer:
38.75N
Explanation:
According to Newton's second law
\sum Fx = ma
Fm-Ff = ma
Fm is the moving force
Fm = mgsin theta
Fm = 15(9.8)sin38
Fm = 90.5N
Ff is the frictional force
m is the mass = 15kg
a is two acceleration
Get the acceleration
a= F/m
a = 52/15
a ,= 3.45m/s²
Substitute the given values into the formula
90.5-Ff = 15(3.45)
90.5-Ff = 51.75
Ff = 90.5-51.75
Ff = 38.75N
Hence the frictional force on the box is 38.75N
A 5 kg ball of clay is moving with a speed of 25 m/s directly toward a 10 kg ball of clay which is at rest. The two clay balls collide and stick together. What is their velocity immediately after the collision?
Answer:
8.3m/s
Explanation:
Given parameters:
mass of clay ball = 5kg
Speed of clay ball = 25m/s
mass of clay ball at rest = 10kg
speed of clay ball at rest = 0m/s
Unknown:
Velocity after collision = ?
Solution:
Since the balls stick together, this is an inelastic collision:
m1v1 + m2v2 = v(m1 + m2)
5(25) + 10(0) = v (5 + 10)
125 = 15v
v = 8.3m/s
A plane flew at a speed of 600 km/hr for a distance of 1500 km,
How long did take to get to its destination
Explanation:
600 ÷ 60 = 10
1500 ÷ 10 = 150 minutes
I don't know how you should express the answer in:
So it's either 150 minutes or 2 hours and 30 minutes.
(This is kind of like mathematics, not physics)
if I accelerated at a rate of 20 mi/hr/s how fast would I be going after 5 seconds?
Answer: 100
Explanation: 20 *5=100
Hope this helps!!Brainlist?plz
Intensitatea curentului electric a unui circuit este de 123A iar sarcina electrica este de 1,7C sa se afle intervalul de timp in care este transportata sarcina electrica
The intensity of the electric current of a circuit is 123A and the electric charge is 1.7C to find the time interval in which the electric charge is transported.
Given that,
Current, I = 123 A
Electric charge, q = 1.7 C
To find,
The time interval in which the charge is transported.
Solution,
The electric current is given by electric charge per unit time. So,
[tex]I=\dfrac{q}{t}\\\\t=\dfrac{q}{I}\\\\t=\dfrac{1.7}{123}\\\\t=0.0138\ s[/tex]
So, the required time is 0.0138 seconds.
