Answer:
heat energy
Explanation:
heat energy
a current of 11 amps at 240 volts flows through an electric range. if it is user an average of 1 hour/day Calculate the kwhr used per week.
The kWh used per week by the electric range whose voltage and current is 240 V and 11 A respectively is 18.48 kWh.
What is electric kilowatt-hour (kWh)?
A kilowatt-hour is a unit of energy: one kilowatt of power for one hour. In terms of SI derived units with special names, it equals 3.6 megajoules (MJ).
To calculate the kWh per week of the electric range, we use the formula below.
Formula:
E = VIt/1000...............Equation 1Where:
E = Electric energy in kWh per week V = VoltageI = Currentt = Total timeFrom the question,
Given:
V = 240 VI = 11 ampst = 1 hour per day = 1×7 = 7 hours per weekSubstitute these values into equation 1
E = 240×11×7/1000E = 18.48 kWhHence, the kWh used per week is 18.48 kWh.
Learn more about electric kilowatt-hour (kWh) here: https://brainly.com/question/13494371
#SPJ1
Hooke's law states that the restoring force of a spring is directly proportional to a small displacement. Students in physics class were conducting an experiment to determine the difference in displacement among various springs. They wanted to determine if displacement not only varied with mass but also with the type of spring used. The class tested twenty springs; they varied in length, circumference, and material. They used an assortment of masses as well. On some springs they used masses of 5g increments; on others, masses of 10g increments. After hanging the masses from each spring, they measured how far the springs stretched. The students concluded that thin, aluminum springs had greater displacement than short, thick, iron springs. How could the students improve the validity of the data in this experiment to better support their conclusion?.
The kind of spring should be held constant so as to improve the validity of the experiment.
What is Hooke's law?Hooke's law states that the force that acts on a spring is directly proportional to the extension of the spring as long as the elastic limit is not exceeded.
As such, we can now understand that we can only be able to talk about the Hooke's law if there is no way in which the material has passed the elastic limit of the material. In this case, we are told that the students just embarked on a kind of experiment and they want to be able to verify the validity of the Hooke's law.
We saw that the masses that were hanged were increased but the springs were also changed. This would not allow us to determine the force constant and the Hooke's law accurately.
Learn more about Hooke's law:https://brainly.com/question/29126957
#SPJ1
What is the ke of an object that has a mass of 2kg and a velocity of 8m/s
The kinetic energy of the object is 64 joule.
What is kinetic energy?According to the definition of kinetic energy in physics, it is the amount of work that an item may accomplish while in motion.
As a scalar quantity, kinetic energy can only be fully defined by its magnitude. SI unit of kinetic energy is Joule.
Given that: mass of the object: m = 2 kg.
Velocity of the object: v = 8 m/s.
Hence, kinetic energy of it =1/2* mass* velocity^2
= 1/2*mv^2
= 1/2 × 2 × 8^2 joule
= 64 joule.
Hence the kinetic energy is 64 joule.
Learn more about kinetic energy here:
https://brainly.com/question/999862
#SPJ1
a uniform meter stick of mass 24 g with two weights hanging from it is balanced on a knife edge at the 40 cm mark. a weight of mass 96 g hangs from the 9 cm mark. at which cm mark must the other weight of mass 96 g be located to keep the meter stick balanced?
The second weight of mass 96 g must be located at the 9 cm mark on the meter stick to keep it balanced.
To determine the location of the second weight that will keep the meter stick balanced, we need to consider the principles of equilibrium.
The weight of the meter stick can be calculated as follows:
Weight of meter stick = mass * acceleration due to gravity
= 24 g * 9.8 m/s^2
= 235.2 N
The total weight of the two hanging weights is 96 g + 96 g = 192 g = 1.92 N.
The sum of the forces acting on the meter stick is equal to zero when:
235.2 N + 1.92 N = 0
This equation tells us that the sum of the forces acting on the meter stick is equal to zero when the total weight of the two hanging weights is equal to the weight of the meter stick.
To determine the location of the second weight, we also need to consider the moments about the pivot point. The moment of a force is calculated as the product of the force and the distance from the pivot point. The moments about the pivot point are equal to zero when the sum of the moments of the forces on one side of the pivot point is equal to the sum of the moments of the forces on the other side of the pivot point.
The moment of the weight of the meter stick about the pivot point is calculated as follows:
Moment of the weight of meter stick = force * distance from pivot point
= 235.2 N * 0.4 m
= 94.08 N*m
The moment of the weight hanging from the 9 cm mark about the pivot point is calculated as follows:
Moment of weight hanging from 9 cm mark = force * distance from pivot point
= 1.92 N * 0.09 m
= 0.1728 N*m
To keep the meter stick balanced, the moment of the second weight must be equal in magnitude but opposite in direction to the moment of the weight hanging from the 9 cm mark. The moment of the second weight can be calculated as follows:
Moment of second weight = force * distance from pivot point
= 1.92 N * distance from pivot point
Substituting the value of the force and setting the moment equal to the negative of the moment of the weight hanging from the 9 cm mark, we get the following equation:
1.92 N * distance from pivot point = -0.1728 N*m
Solving for the distance from the pivot point, we find that the second weight must be located at a distance of 0.09 m from the pivot point, or 9 cm. This is the same distance from the pivot point as the weight hanging from the 9 cm mark.
Therefore, the second weight of mass 96 g must be located at the 9 cm mark on the meter stick to keep it balanced.
Learn more about Mass here:
https://brainly.com/question/19385703
#SPJ4
197) a submarine in neutral buoyancy is 100 m below the surface of the water. what air pressure must 197) be supplied to remove water from the ballast tanks in order for the submarine to surface?
Air pressure must be supplied to remove water from the ballast tanks is 9.8*105 N/m^2.
Buoyancy is the upward force exerted by a liquid that opposes the weight of a partially or fully submerged object. In a liquid column, the pressure increases with depth due to the weight of the liquid above. Therefore, the pressure at the bottom of the liquid column is higher than the pressure at the top of the column. Similarly, the pressure at the bottom of an object immersed in liquid will be greater than at the top of the object. A pressure differential results in a net upward force on an object. The magnitude of the force is proportional to the pressure difference and corresponds to the weight of the liquid (as explained by Archimedes' principle). This is the displaced liquid that would otherwise occupy the underwater volume of the object.
We know that pressure below the surface of water is P1 = Po +hdg
pressure at the surface of water is P2 = Po
Then pressure difference is P = P1 -P2 = hdg
h = depth = 100 m
d = density of water = 1000 kg/m3
g = 9.8 m/s2
Then P = 100*1000*9.8 = 9.8*105 N/m^2
Learn more about Buoyancy here:
https://brainly.com/question/451053
#SPJ4
you work at a garden store for the summer. you lift a bag of fertilizer with a force of 131 n, and it moves upward with an acceleration of 0.790 m/s2. (a) what is the mass (in kg) of the fertilizer bag?
Mass of the fertilizer bag is 165.82 kg
Briefing:According to Newton's law,
F = m*a
So, m= F/a
m= 131/0.790
m= 165.82 kg
What is mass?Mass is the measure of matter of a body.
What is Newton's laws?Newton has stated three laws of motion. The first law states that every object will remain at rest or in uniform motion in a straight line unless an external force compels it to change its state of action .
The second law states that the acceleration of an object is dependent upon two variables - the net force acting upon the object and the mass of the object.
The third law states that every action has an equal and opposite reaction.
To know more such numericals, visit :
https://brainly.com/question/14633087
#SPJ4
a vertical spring has a spring constant of 100 n/m. when an object is attached to the bottom of the spring, the spring changes from its unstretched length of 0.50 to a length of 0.65 m. the magnitude of the weight of the object is
Answer: Hookes law states F=kX where F is the force applied, k is the spring constant, and X is the extension of the spring from its resting point.Substituting the values in, we get:F=100*(0.65-0.5)=100*0.15=15N
171) a force of 16.88 n is applied tangentially to a wheel of radius 0.340 m and gives rise to an angular 171) acceleration of 1.20 rad/s2. calculate the rotational inertia of the wheel.
The rotational inertia of the wheel which has a radius of 0.34 m is 4.782 kgm²
The force applied tangentially to the wheel = 16.88 N
The radius of the wheel = 0.340 m
The angular acceleration of the well = 1.20 rad /s²
The rotational inertia can be found using the formula,
I = F x r / α
where I is the rotational inertia
F is the force applied
r is the radius of the wheel
α is the angular acceleration
Let us substitute the known values in the above equation, we get
I = 16.88 x 0.34 / 1.20
= 5.7392 / 1.20
= 4.782 kgm²
Therefore, the rotational inertia is 4.782 kgm²
Learn more about the rotational inertia in
https://brainly.com/question/22513079
#SPJ4
A 1.5 kg block is on a 15° frictionless incline plane.
a) What is the normal force?
b) What is the downhill force?
c) What is the acceleration?
Answer:
Below
Explanation:
Normal force will be mg cos 15° = 1.5*9.81 cos 15° Newtons
Downplane force will be mg sin 15° = 1.5 * 9.81 sin 15° N
Acceleration
F = ma
F/m = a
1.5 ( 9.81) sin 15° / 1.5 m/s^2 = a
to meet a u.s. postal service requirement, footwear must have a coefficient of static friction of 0.525 or more on a specified tile surface. a typical athletic shoe has a coefficient of 0.785. in an emergency, what is the minimum time interval in which a person starting from rest can move 2.85 m on a tile surface if she is wearing the following footwear?
A minimal time period is required to accelerate through x=3.00m because maximal static friction produces the force that creates maximum acceleration.
Explain what an acceleration is.acceleration is the rate of change in both direction and speed of velocity over time. When anything moves faster or slower in a straight line, it is said to have been accelerated. Because of direction is always shifting, motion on a circle accelerates even while the speed is constant.
A person moves by the help of frictional force, as a result of gtound reaction. So, the formula for frictional force is:
F = μR
where,
F = frictional force
μ = coefficient of friction
R = Normal Reaction = Weight of Body = W = mg
Therefore,
F = μmg
but, from Newton's 2nd Law of Motion:
F = ma
Comparing both equations, we get:
μmg = ma
a = μg ---------- equation (1)
Now, to calculate the distance moved by a body, we use 2nd equation of motion:
s = (Vi)(t) + (0.5)at²
using equation (1), we get:
s = (Vi)(t) + (0.5)μgt²
where,
s = distance moved by body
Vi = initial velocity of body
t = time taken to cover the distance
g = acceleration due to gravity
(a)
Vi = 0 m/s
g = 9.8 m/s²
s = 3.2 m
μ = 0.5
t = ?
Therefore,
3.2 m = (0 m/s)(t) + (0.5)(0.5)(9.8 m/s²)t²
t² = 3.2 m/(0.5)(0.5)(9.8 m/s²)
t = √1.30612 s²
t = 1.14 s
(a)
Vi = 0 m/s
g = 9.8 m/s²
s = 3.2 m
μ = 0.5
t = ?
Therefore,
3.2 m = (0 m/s)(t) + (0.5)(0.5)(9.8 m/s²)t²
t² = 3.2 m/(0.5)(0.5)(9.8 m/s²)
t = √1.30612 s²
t = 1.14 s
(a)
Vi = 0 m/s
g = 9.8 m/s²
s = 3.2 m
μ = 0.87
t = ?
Therefore,
3.2 m = (0 m/s)(t) + (0.5)(0.87)(9.8 m/s²)t²
t² = 3.2 m/(0.5)(0.87)(9.8 m/s²)
t = √0.75 s²
t = 0.87 s
What are acceleration and speed exactly?The rate of change in displacement is known as velocity. Acceleration is the rate at which speed changes. The fact that velocity contains both magnitude and orientation makes it a vector quantity. Acceleration is also a vector quantity since it is simply the rate during which velocity varies.
To know more about acceleration visit:
https://brainly.com/question/12550364
#SPJ4
the mgf has a faster conduction velocity compared with the lgf on an earth worm, because the mgf has (is)
Due to its larger diameter than the lgf, the mgf on an earth worm has a higher conduction velocity.
How come MGN is quicker than LGN?The class proposed that because the MGN has a bigger axon width, its conduction velocity will conduct an action potential more quickly than the LGN. Usually, an axon's myelin thickness increases together with its diameter.
What accelerates the motion of action potentials?The speed of action potential propagation along the axon increases with axon diameter. The sodium ions can migrate more quickly to produce the regeneration of the action potential in the following axon because a larger axon provides less resistance to the flow of ions.
Learn more about axon here:
https://brainly.com/question/21592989
#SPJ4
An obiect drops from a cliff. If
The final velocity of the object after 5 seconds it was dropped is determined as 50 m/s.
What is the final velocity of the object after 5 seconds?The final velocity of the object after 5 seconds it was dropped is calculated by applying the following kinematic equation as shown below.
v = u + at
where;
u is the initial velocity of the objecta is the acceleration of the objectt is the time of motion of the objectDuring the vertical motion of an object, the vertical velocity of the object decreases as the object moves upwards and eventually becomes zero as the object reaches maximum height.
The vertical velocity of the object starts to increase again when the object start falling downwards and becomes maximum before the object hits the ground.
v = 0 + ( 10 m/s² ) ( 5 s )
v = 50 m/s
Learn more about final velocity here: https://brainly.com/question/25905661
#SPJ1
The complete question is below:
if the object falls from the cliff falls with a constant acceleration of 10 m/s2. Find its speed after 5 seconds it was dropped.
a 10kg object is near a planet’s surface such that the gravitational field strength is 4nkg. with what force is the planet attracted to the 10kg object?
The force with which the planet is attracted to the 10kg object is 4N.
What is gravitational force?Gravitational force is described as the most prevalent force in the universe, pulling together on any two objects with mass in the universe.
we have the following data:
Mass of object = 10 kg
Gravitational field strength = 4Nkg
To determine with what force the planet is attracted to the 10kg object:
Mathematically, the force with respect to the gravitational field strength is given by the formula:
Force = mass x gravitational field strength
Force = 10 x 4
force = 40 newton
We can conclude that the force with which the planet is attracted to the 10kg object is 4 Newton.
The gravitational field is the gravitational force exerted per unit mass on a small mass at a point in the field. The gravitational field strength at a point describes how strong or weak a gravitational field is at that point.
learn more about force at: https://brainly.com/question/12970081
#SPJ1
QUESTION 8 OF 30
Using equations for KE and GPE, what is the maximum height an object will
reach if it is thrown vertically upwards at 24.0 m/s ? (Answer to 3 sf with unit)
The maximum height an object will reach if it is thrown vertically upwards at 24.0 m/s will be equal to 29.35 meters.
What is kinetic energy?Kinetic energy is the term used in physics to describe the force that a moving item has.
It is described as the amount of effort necessary to accelerate anybody with a particular mass from rest to a given velocity. Except for variations in speed, the body retains the kinetic energy it gains during acceleration.
As per the given information in the question,
The formula of kinetic energy is,
K.E = 1/2 mv² (i)
The formula of gravitational potential energy is,
u = mg (ii)
Equate equations (i) and (ii)
1/2 mv² = mgh
h = 1/2 v²/g
h = 1/2 (24)²/9.81
= 576/19.62
h = 29.35 meters.
To know more about Kinetic energy:
https://brainly.com/question/26472013
#SPJ1
what is the kinetic energy of a 60.0 g tennis ball traveling at 177.0 kilometers per hour? report your answer in joules (j).
The kinetic energy is 939.87 J.
what is kinetic energy?Kinetic energy is the power that an object has as a result of motion. If we want to accelerate an object, we have to exert force. Applying force requires effort on our part. The object will be moving at a new, constant speed once the work is done because energy has been transferred to it.
A particle, an object, or a collection of particles can move because of kinetic energy, which is the force that drives motion. Kinetic energy is used by objects in motion like a person walking, a baseball being thrown, food falling from a table, and charged particles in an electric field.
Kinetic energy = 1/2mv²
Kinetic energy = 1/2×0.06×177²
Kinetic energy = 939.87 J.
To know more about kinetic energy visit:
https://brainly.com/question/26472013
#SPJ4
Which one of the following statements concerning electromagnetic waves is false?a. One form of electromagnetic radiation is visible light.b. All electromagnetic waves travel through a vacuum region at the speed of light.c. All electromagnetic waves are transverse waves.d. All electromagnetic waves have the same frequency.e. Electromagnetic waves can travel through solids, liquids, gases, and vacuumregions
Answer:
.Answer: d. All electromagnetic waves have the same frequency.
6) Which of the following is NOT true of gravitational force?
A) noncontact
B) depends on mass
C) depends on speed
D) distance
Answer:
D
Explanation:
distance does not factor in when you are calculating the gravitational force of an object
which sentence correctly describes when the triple-alpha process occurs in the life cycle of an average-mass star
Three helium-4 nuclei (alpha particles) are turned into carbon by a series of nuclear fusion processes known as the triple-alpha process.
What results from the triple-alpha procedure as the finished product?
The triple-alpha process and the alpha process are two classes of nuclear fusion reactions that stars use to change helium into heavier elements. The alpha process is also referred to as the alpha ladder. [1] Only helium is used in the triple-alpha process, which also yields carbon.
Which statement concerning alpha particles in an atom is accurate?
Two protons and two neutrons make up alpha particles, which are identical to helium nuclei and have a positive charge.
Learn more about Alpha Particle
Visit:
https://brainly.com/question/17464734
#SPJ4
Suppose a 15 N force is applied to the side of a 5.0 kg block that is sitting on a table. The block experiences a frictional force against the force that is applied.
a) What is the weight of the block (FG)?
b) What is the normal force on the block (FN)?
c) If the coefficient of kinetic friction is μk = .10, what is the frictional force on the block (Ff)?
d) What is the net force on the block?
e) What is the acceleration of the block from the net force?
Answer:
Explanation:
Fg = W = mg = (5.0 kg)(9.8 m/s²) = 49 N
Fnormal = W = 49 N
Ff = μFn = (0.10)(49 N) = 4.9 N
Fnet = 15 N - 4.9 N = 10.1 N
a = Fnet/m = (10.1N)/(5.0kg) = 2.02 m/s²
how long (in s) does it take a child on a swing to complete one swing if her center of gravity is 5.53 m below the pivot?
4.71 s long (in s) does it take a child on a swing to complete one swing if her center of gravity is 5.53 m below the pivot.
What is the center of the gravity?The average position of an object's weight is known as its center of gravity. Any object's travel through space may be entirely explained in terms of how its gravitational center moves from one location to another and, if it is free to spin, how it rotates around that center of gravity. Calculations combining gravitation and dynamics may be made much simpler by treating an object's mass as though it were concentrated at a single location.
Briefing:T=2π√(l/g)
T=2π√(5.53/9.81)
T=4.71
T =4.71 s
To know more about center of gravity visit:
https://brainly.com/question/20662235
#SPJ4
light travels along the length of a 1500-nm-long nanostructure. when a peak of the wave is at one end of the nanostructure, is there a peak or a valley at the other end if the wavelength is (a) 500 nm and (b) 1000 nm?
If the light travels along the length of a 1500 nm , then
(a) if the wavelength is 500 nm then there will be a peak at other end .
(b) if the wavelength is 1000 nm then there will be a valley .
Wavelength is defined as the distance between two consecutive peaks or valleys .
given the length is = 1500 nm ;
we know that , the formula is L = nλ ;
Part (a) ;
for peak at other end ,
n should be a whole number ;
So , λ = 500 nm
n = 1500/500 = 3 ,
Part(b)
λ = 1000 nm ;
n = 1500/1000
= 1.5
Therefore , (a) There will be a peak at other end .
(b) There will not be a peak at other end .
Learn more about Wavelength here
https://brainly.com/question/19542918
#SPJ4
Which of these does a balanced chemical
equation show?
the speed of a reaction
elements created by a reaction
phase changes taking place during a
reaction
the number of atoms involved in a reaction
A balanced chemical reaction shows the element created by the reaction, phase changes during the reaction, and the number of atom involved in it.
What are balanced chemical equation?
A balanced chemical equation is a chemical equation in which the number of atoms for each element in the reaction are equal on both sides of the equation. This is important in chemistry because it ensures that mass is conserved in a chemical reaction. For example, the combustion of methane (CH4) can be represented by the following balanced chemical equation:
CH4 + 2O2 → CO2 + 2H2O
In this equation, there are 4 atoms of carbon (C) on the left side and 4 atoms of carbon on the right side, indicating that all of the carbon has been accounted for in the reaction. There are also 8 atoms of oxygen (O) on the left side and 8 atoms of oxygen on the right side, 4 atoms of hydrogen (H) on the left side and 4 atoms of hydrogen on the right side, and 4 atoms of oxygen (O) on the left side and 4 atoms of oxygen on the right side, indicating that all of the elements have been accounted for in the reaction.
To learn more about balanced chemical equations
https://brainly.com/question/26694427
#SPJ1
in the photoelectric experiments the current (number of electrons emitted per unit time) is proportional to the intensity of light. can this result alone be used to distinguish between the classical and quantum theories
As we already know that intensity of light used is proportional to the no of electrons emitted per unit of time from the metal plate in the photoelectric effect and does not affect the energy of the emitted electrons and so the stopping potential of the photoelectric cell.
so, if we treat light as a packet of energy and follow quantum theory then it can only emit the electrons as energy is provided as a whole and there is no gap between the striking of photons and the emission of electrons from the metal plate but if we follow the classical theory of light being a wave than the intensity does not matter and no electron can be emitted as energy is provided in continuous form as energy can't be stored and used together.
know more about 'Photoelectric effect' here :
brainly.com/question/26465043
the star antares has an apparent magnitude of 1.0 and the star procyon has an apparent magnitude of 0.4. which star appears brighter in the sky?
Procyon appears brighter in the sky.
What is star antares ?An M1 red supergiant star is the type of star that Antares belongs to. Antares is substantially cooler and redder in color than most other stars, as indicated by its M1 designation. About 6,100 degrees Fahrenheit is the surface temperature (3,400 degrees C).
The brightest star in the constellation Scorpio, the scorpion, is Antares, which is frequently referred to as the scorpion's heart. The star is a red supergiant with a mass that is around 12 times that of the sun, a diameter that is 750 times that of the sun, and a luminosity that is more than 75,000 times greater.
TO know more about star antares you may visit:
https://brainly.com/question/14471998
#SPJ4
If you are holding a bucket steady by a rope with a tension force of 20 N, how much does the bucket weigh?
The weight of the bucket suspended by rope held in your hand is 20 N.
What is Newton's third law of motion?
Newton's third law of motion states that for every action there is an equal and opposite reaction. That is the force applied or exerted on an object is equal to the reaction of the object.
Mathematically, the formula for the Newton's third law of motion is given as;
Fa = Fb
where;
Fa is the applied force on the objectFb is the reaction experienced by the objectThe applied force and the reaction force are equal in magnitude but opposite in direction.
Thus, if the tension holding a bucket upward is 20 N, then there must be an equal and opposite force pushing the bucket downwards. The downward force of the bucket or the weight of the bucket must be equal to the tension holding the bucket upwards.
Learn more about weight here: https://brainly.com/question/2337612
#SPJ1
a wall of a small house is 3 meters by 3 meters and is insulated using material that is similar to styrofoam (see table above). the styrofoam is about 2.5 cm thick. a heater inside the house keeps the temperature at 25 c while it is 0 c outside the shed. how much power in watts does the heater use just to make up for the heat lost through this one wall.
The heater needs to provide 540 W of power just to make up for the heat lost through this one wall.
What is Styrofoam?Styrofoam is a trademarked brand of foam insulation and craft material manufactured by the Dow Chemical Company. It is made from expanded polystyrene (EPS) beads that are fused together with steam and pressure. EPS is a lightweight and rigid material that is used for insulation, packaging, and soundproofing. Its properties make it an ideal material for crafting, floristry, model building, and other art projects. Styrofoam is stable in most environments and is resistant to water, oil, and most chemicals. It can be cut, shaped, and painted easily and is an excellent thermal insulator. In addition, it is also non-toxic and non-carcinogenic, making it a safe and economical choice for many applications.
Assuming that the wall is a perfect insulator, the heater will have to provide enough power to make up for the heat lost due to conduction and convection. The rate of heat loss per unit area is given by:
Q = λ*A*(T2 - T1)/d
Where:
λ = thermal conductivity of styrofoam (see table above)
A = Area of wall (3*3) = 9 m2
T2 = Temperature inside the house (25C)
T1 = Temperature outside the house (0C)
d = thickness of styrofoam insulation (2.5 cm)
Plugging in the values we get:
Q = 0.045*9*(25-0)/0.025 = 540 W
Therefore, the heater needs to provide 540 W of power just to make up for the heat lost through this one wall.
To learn more about Styrofoam
https://brainly.com/question/29332536
#SPJ4
HELP PLS
HELP PLS
HELP PLS
HELP PLS
HELP PLS
HELP PLS
HELP PLS
HELP PLS
The new acceleration would be 24.0 m/s/s.
What is acceleration?Acceleration is the rate of change of velocity of an object over time. It is a vector quantity, meaning that it has both magnitude and direction. Acceleration is the result of applying a force to an object, and can be described mathematically as the change in velocity (or speed) divided by the time it takes for the acceleration to occur. Acceleration can also be caused by a change in the direction of motion and is measured in meters per second squared (m/s2). It is an important concept in physics, and is used to describe motion in objects ranging from cars to planets.
The new acceleration would be 24.0 m/s/s. This is because the acceleration of an object is directly proportional to the force applied to it, and inversely proportional to its mass. Therefore, doubling the mass of the object would halve the acceleration, since the force applied to the object remains the same.
To learn more about acceleration
https://brainly.com/question/605631
#SPJ1
an airplane flies horizontally at a speed of 351 km/h and drops a crate that falls to the horizontal ground below. neglect air resistance.part (a) if the altitude of the plane was 580 m, then how far, horizontally in meters, did the crate move as it fell to the ground?
Refer to the attached photos. I would appreciate a rate :)
the moment of inertia of an object of mass m(a)m(a) is an intrinsic property of the object, (b) depends on the choice of axis of rotation, (c)(c) is proportional to mm regardless of the choice of axis, (d)(d) both (b)(b) and (c)(c) are correct.
Option (B)is correct
depends on the choice of axis of rotation
What does m in a moment of inertia mean?
Formula for Moment of Inertia
Moment of inertia is defined in general form as I = m r2,
where m is the sum of the product of the mass.
r is the separation from the rotational axis.
What elements affect inertia?
The position and orientation of the rotational axis affect a body's moment of inertia. It also depends on the body's size, shape, and how its mass is distributed around a particular axis. Q.
Learn more about Inertia
Visit
https://brainly.com/question/1358512
#SPJ4
a watermelon explodes into three equal masses. one mass moves east at 15.0 m/s. if a second mass moves at a velocity of 10.0 m/s 45.0o s of e, what is the velocity of the third mass? (hint: the total momentum is zero, so how will your vector arrows add up?)
The velocity of third mass of watermelon is 3.12m/sec if it explodes into three equal masses.
We know that we need to conserve the momentum of watermelon in a certain direction.Also,we know that initial momentum of watermelon is zero,it means that according to law of conservation of momentum final momentum should be zero.
Now,initial momentum of watermelon=0Kg-m/sec
Alos,we know that momentum =mass× velocity
Now,suppose watermelon has mass m.When it explodes into three equal parts,then the mass of each watermelon pieces is m/3
=>So,final momentum of piece moving to east=(m/3)×15
Similarly final momentum of second and third piece are
(m/3)×10×1/√2 and (m/3) × v × (1/√2)
So,conserving momentum,we get
=>0=(m/3) × 15 +((m/3)×10×1/√2 ) + (m/3)×10×1/√2 )×v
=> - (15 + 10/√2) = (10/√2)×v
=> - (15√2 + 10) = 10v
=>v = (15√2 + 10)/10
=>v= -(21.21+10)/10
=>v= -31.21/10
=>v= -3.12m/sec
Here negative sign shows that mass will move opposite direction to first piece.
Hence, required velocity is 3.12m/sec.
To know more about velocity, visit here:
https://brainly.com/question/18084516
#SPJ4
