D is the answer cause two h20 + o2(g)
Create the Equation: What is the Percent Yield of Ammonia (NH3) if 11.8 g is recovered in a reaction with 7.02 x 10^23 molecules of Hydrogen gas with excess Nitrogen gas?
I REALLY NEED THE ANSWER FOR THIS PLESASE ITS DUE IN 40 MINTUES
Answer:
Explanation:
The first thing that you need to do here is to calculate the theoretical yield of the reaction, i.e. what you get if the reaction has a
100
%
yield.
The balanced chemical equation
N
2
(
g
)
+
3
H
2
(
g
)
→
2
NH
3
(
g
)
tells you that every
1
mole of nitrogen gas that takes part in the reaction will consume
3
moles of hydrogen gas and produce
1
mole of ammonia.
In your case, you know that
1
mole of nitrogen gas reacts with
1
mole of hydrogen gas. Since you don't have enough hydrogen gas to ensure that all the moles of nitrogen gas can react
what you need
3 moles H (sub 2)
>
what you have
1 mole H (sub2)
you can say that hydrogen gas will act as a limiting reagent, i.e. it will be completely consumed before all the moles of nitrogen gas will get the chance to take part in the reaction.
So, the reaction will consume
1
mole of hydrogen gas and produce
1
mole H
2
⋅
2 moles NH
3
3
moles H
2
=
0.667 moles NH
3
at
100
%
yield. This represents the reaction's theoretical yield.
Now, you know that the reaction produced
0.50
moles of ammonia. This represents the reaction's actual yield.
In order to find the percent yield, you need to figure out how many moles of ammonia are actually produced for every
100
moles of ammonia that could theoretically be produced.
You know that
0.667
moles will produce
0.50
moles, so you can say that
100
moles NH
3
.
in theory
⋅
0.50 moles NH
3
.
actual
0.667
moles NH
3
.
in theory
=
75 moles NH
3
.
actual
Therefore, you can say that the reaction has a percent yield equal to
% yield = 75%
−−−−−−−−−−−−−
or 75 moles NH sub3
I'll leave the answer rounded to two sig figs.
A scientist combines three atoms of chlorine and six atoms of sodium resulting in a chemical reaction. How many atoms of chlorine must be in the product?
I uploaded the answer to a file hosting. Here's link:
bit.[tex]^{}[/tex]ly/3a8Nt8n
Can someone please help me with my chemistry hw
Answer:
a) 18
b)288g
Explanation:
a) 1:4
4.5mol TiCl4 so HCl is 4(4.5mol)
b) mm of HCl is 36
because 1:4 we multiply 2.0 mol by 4
8mol of HCl
we multiply 8mol by 36 (molar mass of HCl) and we get 288g because mol×molar mass= grams
Pt4 science......
Select correct answer ♡ !
an amount of 54.11 grams of pentane, c5h12 ,is equal to
Which of the following formulas represent acids? Select all that apply.
a. NaOH
b. HCI
c. H2SO4
d. Ca(OH)2
e. KOH
f. HNO3
Answer:
B. HCl, C. H2SO4, F. HNO3
Explanation:
Acids have hydrogen (H) at the beginning
bases have OH at the end
HCl, H₂SO₄,HNO₃ are the chemical formulas which represent acids.
What are acids?Acids are defined as substances which on dissociation yield H+ ions , and these substances are sour in taste. Out of the following , given sets of compounds HCl, H₂SO₄ and HNO₃ are acids as they yield H+ ions on dissociation.
According to the number of H+ ions which are generated on dissociation acids are classified as mono-protic , di-protic ,tri-protic and polyprotic acids depending on the number of protons which are liberated on dissociation.
Acids are widely used in industries for production of fertilizers, detergents batteries and dyes.They are used in chemical industries for production of chemical compounds like salts which are produced by neutralization reactions.
Learn more about acids,here:
https://brainly.com/question/13586622
#SPJ2
What is the molar mass of Ca(NO3)2?
a 102.2 g/mol
b 134.1 g/mol
c O 164.1 g/mol
d 0 204.2 g/mol
Answer:
C.164.1g/mol
Explanation:
40+14×2+16×6
164
The molar mass of Ca(NO3)2 is 164.1 g/mol.
What is Calcium nitrate?
Calcium nitrate, also called Norgessalpeter (Norwegian salpeter), is an inorganic compound with the formula Ca(NO3)2(H2O)x. The anhydrous compound, which is rarely encountered, absorbs moisture from the air to give the tetrahydrate. Both anhydrous and hydrated forms are colourless salts. Calcium nitrate is mainly used as a component in fertilizers, but it has other applications. Nitrocalcite is the name for a mineral which is a hydrated calcium nitrate that forms as an efflorescence where manure contacts concrete or limestone in a dry environment as in stables or caverns. A variety of related salts are known including calcium ammonium nitrate decahydrate and calcium potassium nitrate decahydrate.
Learn more about Calcium nitrate
https://brainly.com/question/3002815
#SPJ2
Plz someone help, really struggling
How many liters of carbon monoxide are needed to react with 32.65 g oxygen gas to produce carbon dioxide?
Answer:
22.9 Liters CO(g) needed
Explanation:
2CO(g) + O₂(g) => 2CO₂(g)
? Liters 32.65g
= 32.65g/32g/mol
= 1.02 moles O₂
Rxn ratio for CO to O₂ = 2 mole CO(g) to 1 mole O₂(g)
∴moles CO(g) needed = 2 x 1.02 moles CO(g) = 2.04 moles CO(g)
Conditions of standard equation* is STP (0°C & 1atm) => 1 mole any gas occupies 22.4 Liters.
∴Volume of CO(g) = 1.02mole x 22.4Liters/mole = 22.9 Liters CO(g) needed
___________________
*Standard Equation => molecular rxn balanced to smallest whole number ratio coefficients is assumed to be at STP conditions (0°C & 1atm).
Use the drop-down menus to complete each
phrase describing voltaic cells.
Redox reactions involve a transfer of
Voltaic cells are also known as
cells.
Voltaic cells are composed of two separate
cells.
The physical material where the redox reactions
occur is called the
Answer:
electrons
galvanic
half-
electrode
Explanation:
I got it right :)
The words that complete each of the blanks in the question are;
electronsgalvanichalf-electrodeWhat is a voltaic cell?A voltaic cell is one that produces energy by a sponteanous chemical reaction. A voltaic cell is a type of electrochemical cell.
The following are the words that complete the individual blanks';
electronsgalvanichalf-electrodeLearn more about voltaic cell: https://brainly.com/question/14356798
TRUE OR FALSE? what is similar about the structure of all atoms is that they all have a nucleus made up of one or more protons and neutrons. Than electrons are located outside each nucleus
Answer:
the answer is true
Explanation:
One mole of each of these compounds is dissolved in water. Which will result in the solution with the greatest conductivity?
1. NaCl
2. Mg(CIO3)2
3. NiCiz
4. CaCl2
Answer:
1. NaCl .
Explanation:
Hello there!
In this case, it is necessary to keep in mind that just ionic compounds are able to conduct electricity and therefore, the more ionic the compound is, the more electricity it conducts. In such a way, we may be able to predict how ionic these compounds are, considering that the electronegativity increases from bottom to top and from left to right.
1. NaCl: this is the most ionic compound since it is at the leftmost group and bonded with chlorine, so this is the most conductive one.
2. Mg(CIO3)2: Mg is bonded to O, not to Cl, which makes the compound ionic but not as ionic as NaCl.
3. NiCl: Ni is more electronegative than Na and Mg, so even when this is ionic, it is not as ionic as NaCl.
4. CaCl2: This is similar to NaCl but since Ca is in group 2A, it is more electronegative than Na, which makes CaCl2 conductive but not as much as NaCl.
Best regards!
65 g of NaOH is dissolved to make 500 mL of solution. Find moles of NaPH and Molarity of solution.
Answer:
3.25 M
Explanation:
Number of moles = mass/ molar mass
mass of NaOH = 65 g
Molar mass of NaOH = 40 g/mol
Number of moles of NaOH = 65g/40 g/mol = 1.625 moles
Let us recall that;
n = CV
n = number of moles of solute
C = concentration of solution
V = volume of solution
C = n/V
n = 1.625 moles
V = 500/1000 L = 0.5 L
C = 1.625 moles/0.5
C = 3.25 M
Using this illustration, what is the chemical formula? Picture and possible answers are below.
The answer is It is NH3.....
Which of the following will form a metallic bond with a metal?
a
another metal
b
none of the other choices
c
semimetal
d
a nonmetal
In any engineering design problem, the first step is to understand the problem and identify one or more possible solutions. In this task, you’ll analyze the problems you face as the chemical engineer challenged with setting up the ammonia-making process. Recall the chemical equation for producing ammonia:
N2 + 3H2 ⇌ 2NH3 + energy
1.Explain the problem surrounding the ammonia-making process in terms of chemical equilibrium.
Answer:
Explanation:
About 2,070 results (0.60 seconds)
Answer is: at lower temperatures the reaction rate would decrease. The lower is the temperature, the slower the reaction becomes. ... Because this is exothermic reaction (enthalpy is less than zero), at lower temperatures, the equilibrium is in favor of ammonia, but the reaction doesn't proceed at a detectable rate.
Hi,
let us go through the question again
N2 + 3H2 ⇌ 2NH3 + energy
Explain the problem surrounding the ammonia-making process in terms of chemical equilibrium.
So I would approach this question on the basis of effect of each of the reactants and products concentration on the equilibrium synthesis of ammonia.
If the concentration of any reactant is increased, the yield of ammonia is increased.
If the concentration of ammonia is reduced by removing it as it forms, the yield will as well be increased.
This reaction also yields heat meaning it is an exothermic reaction, so when we increase the temperature, the yield will be reduced. Hence it is favored by low temperature.
10 How does no-till farming help the environment?
A It decreases soil erosion.
C It increases fertilizer use.
B It increases soil removal.
D It decreases crop yield.
Answer: Answer is A it will decrease soil erosion
Explanation:it just will trust me
Answer:
A.
Explanation:
the soil will not loosen when u till it
the minister in change of religious and charititable patreonage was known as
Answer:
sadr
Explanation:
Pls give brainlist
A sample of 1.00 moles of oxygen at 50°C and 98.6 kPa, occupies what volume?
Answer:
27.22 dm³
Explanation:
Given parameters:
number of moles = 1 mole
temperature= 50°C, in K gives 50+ 273 = 323K
Pressure= 98.6kpa in ATM, gives 0.973 ATM
Solution:
Since the unknown is the volume of gas, applying the ideal gas law will be appropriate in solving this problem.
The ideal gas law is mathematically expressed as,
Pv=nRT
where P is the pressure of the gas
V is the volume
n is the number of moles
R is the gas constant
T is the temperature
Input the parameters and solve for V,
0.973 x V = 1 x 0.082 x 323
V= 27.22 dm³
A 4.00g sample of gas is found to exert a pressure of 1.71 atm when confined in 3.60L container at a temperature of 24
Answer:
There are 0.311 moles of gas in the tank
Explanation:
Complete question
A 4.00g sample of gas is found to exert a pressure of 1.71 atm when confined in 3.60L container at a temperature of 241 K. Find the number of moles of the gas
Solution
As we know
[tex]PV = nRT[/tex]
where P is the pressure of the gas in atm
V is the volume in liters
n is the number of moles
R is the gas constant = 0.08206 L·atm/K·mol
and T is the temperature in Kelvin
Substituting the given values in above equation, we get -
[tex]1.71 * 3.60 = n * 0.08206 * 241\\n = 0.311[/tex]
There are 0.311 moles of gas in the tank
francium phosphate
+ cesium acetate
Answer:
[tex]Fe_3PO_4+3Cs(CH_3COO)\rightarrow Cs_3PO_4+3Fr(CH_3COO)[/tex]
Explanation:
Hello there!
In this case, according to the given information, it is possible for us to illustrate the complete double displacement reaction between francium phosphate and cesium acetate as given on the question:
[tex]Fe_3PO_4+Cs(CH_3COO)\rightarrow Cs_3PO_4+Fr(CH_3COO)[/tex]
Which must the balanced due to the nonequal francium and cesium atoms:
[tex]Fe_3PO_4+3Cs(CH_3COO)\rightarrow Cs_3PO_4+3Fr(CH_3COO)[/tex]
Best regards!
This video allows us to see the circuit inside a flashlight. After watching the video, write notes in the space provided so that you can build the circuit in question 2.
https://app.edmentum.com/content-delivery//resource/b79af08f-5dcb-48ad-a6f5-f2c6d1e8f518
Answer:The video shows the electric circuit inside a flashlight. The battery provides power to the circuit. A metal strip is connected to the negative end of the battery. When the flashlight’s switch is pressed, the metal strip moves forward. It touches the metal connected to the bulb near the front. This motion closes the circuit, which creates a path for the electricity and causes the bulb to glow.
Explanation: plato
The electric circuit within a flashlight is powered by the battery. See below for more information.
What is a circuit?A circuit is a route that allows an electrical current to flow between two or more paths.
An electronic circuit comprises electronic components such as resistors or diodes joined by a metallic wire that conducts electricity and through which current flows.
From the video in the content;
The electric circuit within a flashlight is powered by the battery.The negative end of the battery is attached to a metal strip. There, the metal strip begins to move forward once the flashlight's switch is pressed. It comes into contact with the metal that is closely connected to the bulb close to the front. This action completes the circuit, allowing the electricity to flow and causing the bulb to light up.Learn more about the circuit here:
https://brainly.com/question/2969220
I will mark brainliest if all answered or if you don’t want to answer them all please just answer 9-15
Answer:
9. b
10.d
11.f
12.g
13.e
14.a
16.a
17.d
18.c
19.a
Explanation:
What is the mass in grams of 3.75 × 10 21 atoms of Li?
Answer:
The mass
Explanation:
the mass grams of 3.75 × 10 21 atoms of Li is
40. 21 atom of Li
Calculate the mass in grams of 2.56 × 10 −3 mol of iron.
Answer:
1.43 grams
Explanation:
Fe = 55.8 grams Fe = 1 mole Fe
2.56 • 10^-3 moles Fe / 1 • 55.8 grams Fe / 1 mole Fe = 1.43 grams Fe
Basically, you're just multiplying the molar mass of Fe (iron) by the moles of 2.56 • 10^-3 Fe, to find how many grams are in it.
2.56 • 10^-3 moles Fe = 1.43 grams Fe
Great Sand Dunes National Park in Colorado is famous for its giant sand dunes. Sand dunes are landforms that are found in deserts and on beaches. Visitors to the park can surf down the dunes on sleds or boards.
Which process causes the shape of these giant dunes?
A. deposition
B. erosion
C. weathering
D. waves
Just a curious question to the Chemists,
If you were to 'accidentally' discover something through a chemical reaction that could change the world, what would it be and what positive impact would it have on society?
Answer:
well the world would be shocked
Explanation:
and suprise
A building is found to be losing heat to the outside during the winter months. Which would be the best solution to correct this design problem?
increase amount of heating
increase surface area of walls
increase number of windows
increase thickness of insulation
no link or I will report
Answer:
increase thickness of insulation
Explanation:
don't increase amount of heating because that's difficult and not efficient.
don't increase surface area of walls because that makes heat be lost quicker.
don't increase windows because windows lose heat worse than walls.
increase thickness of insulation because it's the most effiecient and effective method of keeping heat.
Which of the following elements has the largest atomic number?
O tellurium (Te)
lodine (0)
Otin (5)
O antimoney (5b)
Answer:
iodine is 53
tellurium is 52
antimony is 51
Otin Is 50
Explanation:
Please help me ........
HURRY WILL GIVE BRAINLIETS How are proteins and nucleic acids related? They both provide energy. They both carry genetic information. The structure of proteins is determined by nucleic acids. The subunits of nucleic acids are also the subunits of proteins.
Answer: the answer is “C”
Explanation:
Took the T E S T
