17) Heat energy travels from an object with a high
A) internal energy to an object with a lower internal energy.
B) temperature to an object with a lower temperature.
C) Both of these, for they say essentially say the same thing.
D) None of the above choices are true.

The function of a diaphragm on a microscope is to control the amount of light that reaches the specimen.

Microscope is an optical instrument that is used for observing relatively small objects. The microscope allows us see very small things that our eyes otherwise couldn't see.

Their ability to function is because they have been constructed with special components that enable them to achieve high magnification levels.

Some of the components of microscope are as follows;

The primary role of the diaphragm is to control the amount of light that reaches the specimen.

Learn more about microscope at: https://brainly.com/question/18661784

#SPJ1

Average speed a truck moves with a speed of 90 km/h for 45 mins and 120 km/h for next 20 mins is  40.72km/h.

Average speed = Total distance / Total time

S = 73.3/ 1.8

S = 40.72km/h

Given:

90 km/h is the speed.

Time = 0.75 hours * 45 minutes

To calculate the distance travelled, substitute the following values into the distance formula:

Distance (D) is equal to the product of speed and time, hence D = 90 * 0.75 = 33.75 km.

Given:

120 km/hr speed

Time = 20 minutes = 0.3333 hours

To calculate the distance travelled, substitute the following values into the distance formula:

Consequently, the distance travelled overall is:

Distance equals speed times time, so D = 120*0.33 D = 39.6 km.

Distance is a measurement of how far apart two things or points are, either numerically or occasionally qualitatively. Distance can refer to a physical length in physics or to an estimate based on other factors in common usage.

Use the formula d = st, or distance equals speed times time, to find the distance.

To know more about speed, visit:

https://brainly.com/question/28224010

#SPJ1

Assuming constant specific heats at room temperature, the power delivered by gas-turbine power plant that operates on a simple ideal Brayton cycle with air as the working fluid is 15678.25 KW

P1 = 95 KPa

T1 = 290 K

T3 = 1100 K

P2 = P3 = 760 KPa

Qin = 35000 KJ / s

At constant specific heats at room temperature,

R = 0.287 KJ / Kg K

cp = 1.005 KJ / Kg K

cv = 0.718 KJ / Kg K

K = 1.4

Pressure ratio, rp = P2 / P1

rp = 760 / 95

rp = 8

Efficiency, η = Wnet / Qin

1 - 1 / [ ( rp )^( ( k - 1 ) / k ) ] = Wnet / Qin

Wnet = 35000 * 1 - 1 / [ ( rp )^( ( 1.4 - 1 ) / 1.4 ) ]

Wnet = 35000 * 0.44795

Wnet = 15678.25 KW

Therefore, the power delivered is 15678.25 KW

To know more about power delivered by gas-turbine power plant

https://brainly.com/question/18850707

#SPJ4

The correct answer is option A.

We can have velocity equal to zero but acceleration not equal to zero.

We know that acceleration depends on the velocity which depends on the direction and time.

But there are times when a body can be said to be accelerating even when the velocity is zero.

Velocity is a vector quantity and is defined as the rate of change of displacement of an object with time. On the other hand, acceleration is the time rate of change of velocity.

The acceleration is

a = dv/dt

For zero acceleration

0 = dv / dt

It is possible that the acceleration of a particle is non-zero and velocity is zero at the same instant.

At the point where the velocity becomes zero, only the instantaneous velocity of the body is zero, at any time before or after this time, the object has a non-zero velocity.

For example, if a ball is thrown up then at the highest point, velocity is zero but the acceleration is non-zero.

This means that there is still change in the velocity when the velocity of the object reaches zero. Therefore, the body is still accelerating.

By the property of Simple Harmonic Motion, we can tell that when a ball is thrown upwards on earth with a constant velocity, the gravitational force of the earth acts on it in the opposite direction.

Therefore, at the highest point, the velocity of the ball becomes zero, after which it starts to fall down. At this point, the velocity of the ball is zero yet its acceleration is equal to g = 9.8 m/s² which is a non-zero and the body is said to be accelerating even if the velocity is equal to zero.

To know more about acceleration, refer: https://brainly.com/question/12550364

#SPJ4

Planets fall into two major categories (terrestrial and jovian).

a. Planets can be divided into two main groups.

b. The fusing of hydrogen into helium is how the Sun produces energy.

c. Gravity brought about the solar nebula's collapse.

d. There are a tons of comets and asteroids.

The four main characteristics of the solar system are listed above in the order in which they contributed to its origin.

The majority of planets can be divided into two groups: gaseous giants and other terrestrial planets. As a result of the solar chromosphere's solar winds.

This energy powers the fusion of hydrogen and helium in the sun's core, which powers the sun itself. The solar nebula was a cloud of gases and dust that started to spin on its own, drawing the microscopic particles closer due to gravity. In the solar system, there are around 100 billion comets and asteroids.

To know more about planets, visit:

https://brainly.com/question/14581221

#SPJ4

When a source of light waves is moving away from the observer, the light waves appear to be dispersed. If the galaxy weren't moving, the spectral lines observed in the galaxy would be at shorter  wavelengths.

Because the relationship between wave frequency and wavelength is inverse, gamma rays have incredibly short wavelengths that are barely a fraction of the size of atoms, whereas other wavelengths can go as far as the universe. Regardless of the medium they travel through, electromagnetic radiation's wavelengths are commonly represented in terms of the vacuum wavelength, even though this isn't always mentioned explicitly.

The wavelength of electromagnetic radiation affects its behavior. The speed of light is equal to wavelength times frequency. Frequency multiplied by the Planck constant equals energy. 1/wavelength is the wave number in cm. Along with the wavelengths of different parts of the electromagnetic spectrum, a rough estimation of the wavelength size is displayed..

To know more about  wavelength visit : brainly.com/question/14530620

#SPJ4

For a 3-sided joint, it is a good practice to place a nonadhering plastic bond breaker strip to the concealed side (inner side) before applying joint sealant is a true statement.

The level of attention taken before applying the sealant will determine how effectively it adheres to the surface. The first step in joint preparation is a site inspection by the sealant contractor to ensure that all joint dimensions are in accordance with the requirements.

All parties shall be informed if the width or depth of joints deviates from those stated owing to component location, incorrect component size, workmanship defects, weathering, or other joint modifying factors.

Note that Sealant Joints in the Exterior Wall seams that are closed with rubberlike compounds.

Therefore, If a non-adhering plastic bond breaker strip is not inserted into the opening before the sealant, the sealant in three-sided junctions is prone to tear.

Learn more about sealant from

https://brainly.com/question/28192689
#SPJ1

for a 3-sided joint, it is a good practice to place a nonadhering plastic bond breaker strip to the concealed side (inner side) before applying joint sealant. true or false.

A. The electric field E(x) at x = 1.0 m is 27.07 V/m

B. The electric field E(x) at x = 1.6 m is 8.15 V/m

Electric potential is work done in moving a unit charge from one point to the other.

Electric field is the ofrce per unit charge acting at a point in an electric field.

Given that the electric potential V = 100e⁻²ˣ V, the electric field is given by

E = -dV/dx = -d100e⁻²ˣ/dx

= -100de⁻²ˣ/dx

= -100 × -2 × e⁻²ˣ

= 200e⁻²ˣ

Since we require the electric field at x = 1.0nm, substituting the value of x = 1.0 into the equation, we have

E(x) = 200e⁻²ˣ

E(1.0) = 200e⁻²⁽¹⁾

E(1.0) = 200e⁻²

E(1.0) = 200/e²

E(1.0) = 200/7.3891

E(1.0) = 27.07 V/m

So, E(1.0) = 27.07 V/m

Given that V = 100e⁻²ˣ V, the electric field is given by

E = -dV/dx = -d100e⁻²ˣ/dx

= -100de⁻²ˣ/dx

= -100 × -2 × e⁻²ˣ

= 200e⁻²ˣ

Since we require the electric field at x = 1.6 m, substituting the value of x = 1.6 into the equation, we have

E(x) = 200e⁻²ˣ

E(1.6) = 200e⁻²⁽¹°⁶⁾

E(1.6) = 200e⁻³°²

E(1.6) = 200/e³°²

E(1.6) = 200/24.533

E(1.6) = 8.15 V/m

So, E(1.6) = 8.15 V/m

Learn more about electric field here:

https://brainly.com/question/24397546

#SPJ1

Correct label the following anatomical parts of a kidney are

Left Top to bottom:

- Fibrous capsule

- Renal pyramid

- Renal column

- Minor calyx

- Major calyx

- Renal Cortex

- Renal Medulla

One of two organs in the abdomen. Kidneys remove waste and excess water (such as urine) from the blood and balance chemicals (such as sodium, potassium, and calcium) in the body. Kidneys also produce hormones that help control blood pressure and stimulate the bone marrow to make red blood cells.

Kidney function:

To know more about kidney, visit:

https://brainly.com/question/28021240

#SPJ1

When a planet orbiting another star is made primarily of hydrogen and helium and has approximately the same mass as jupiter but is the same size as neptune, it is a false statement.

A planet is defined as the solar body that revolves round the sun. There are various types of planets which include the following:

The statement about the planet is a false statement because it is contradictory. This is so because, in order to be smaller than Jupiter, a hydrogen-helium planet would have to be more gravitationally compressed, so it would have to have a larger mass than Jupiter, also a planet with that size and mass would be too dense to be made of hydrogen and helium.

Learn more about Jupiter here:

https://brainly.com/question/27974961?source=archive

#SPJ1

long-term outsourcing agreements, fair and incentive-laden contracts, thorough training and team-building exercises, co-location when appropriate, well-defined requirements and procedures, frequent

Multiple distinct curricula, each of which include a different set of classes, are what is meant by "comprehensive training." One option is to create a comprehensive training course with a single project management curriculum.

A more effective, competitive, and engaged workforce is essential to your company's financial performance, and dedicated training and development supports that engagement. A company that invests in career development will also see a 93% increase in employee retention.

To know more about extensive training visit:

https://brainly.com/question/16256167

#SPJ4

The distance from the base of the cliff 120 m high the ball will land is 29.7 m.

Distance is the length between two points.

To calculate the distance from the base the ball will land, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the distance from the base of the cliff the ball will land is 29.7 m.

Learn more about distance here: https://brainly.com/question/26550516

#SPJ1

Answer:

b

Explanation:

Distance between the nodal planes is 2.4m and If the standing wave pattern is in its eighth harmonic, cavity is 9.6m long.

Electromagnetic waves are waves that are created as a result of vibrations between electric and a magnetic field.

We know that ;

f= c/λ

f is frequency

c= Speed of light and V is wavelength

the wavelength is equal to,

λ= 2L/n

L is Length and n is Number of antinodes/nodes

A) Given, frequency= 125MHz, therefore

λ = c/f

λ =3 * 10⁸/125 *10⁶

=2.4 m

Distance between the nodal planes is 2.4m.

B) 8th harmonic given, so n= 8

L= ( λ * n)/2

= 2.4 * 8/2

L = 9.6 m

If the standing wave pattern is in its eighth harmonic, cavity is 9.6m long.

To know more about electromagnetic waves, refer

https://brainly.com/question/75996

#SPJ4

The human life valuation based on the information is E. $500000 or more.

It was illustrated that the motorcycle riders to wear helmets reduces the probability of a motorcycle fatality from 0.3 percent to 0.2 percent over the lifetime of a motorcycle rider.

Probability is the occurence of likely events. It is the area of mathematics that deals with numerical estimates of the likelihood that an event will occur or that a statement is true.

Since the cost of a lifetime supply of helmets is $500, the lifetime human life = = 500 / (0.3 - 0.2) × 100

= 500 / 0.1 × 100

= 5000 × 100

= 500000

The correct option is E.

Learn more about probability on:

https://brainly.com/question/24756209

#SPJ1

Complete question

Suppose that requiring motorcycle riders to wear helmets reduces the probability of a motorcycle fatality from 0.3 percent to 0.2 percent over the lifetime of a motorcycle rider and that the cost of a lifetime supply of helmets is $500. it is efficient for the government to require riders to wear helmets if human life is valued at:

A. $100 or more.

B. $150 or more

C. $500 or more.

D. $50000 or more.

E. $500000 or more.

Using the right hand rule, it is possible to calculate the magnetic field direction at the site of the charge caused by the current-carrying wire.

The region surrounding a magnet where the effects of magnetism are perceived is known as the magnetic field. To explain how the magnetic force is dispersed in the area surrounding and inside something magnetic in nature, we utilize the magnetic field as a tool.

The same poles resist one another whereas opposite poles are attracted to one another. The north-seeking poles of the iron's atoms line up in the same way when you rub it against a magnet.

To know more about Magnetic field visit:

https://brainly.com/question/14848188

#SPJ4

Vowels are pronounced from back to front, increasing the frequency of the second formant. For front vowels like I and rear vowels like [u], the second formant (f2) is more frequent than the other.

The number of a wave's oscillations per unit of time, expressed in hertz, is what is known as frequency (Hz). The relationship between pitch and frequency is straightforward.

When describing the temporal rate of change seen in oscillatory and periodic phenomena like mechanical vibrations, audio signals (sound), radio waves, and light, frequency is a crucial metric utilized in science and engineering.

To know more about Frequency visit:

https://brainly.com/question/5102661

#SPJ4

The speed of the blue dot when it is 0.80 m above the road is 11.2 m/s

d = diameter of tire = 0.80 m

r = radius of tire = (0.5) d = (0.5) (0.80) = 0.40 m

v = speed of bicycle = 5.6 m/s

w = angular speed of the tire

Speed of cycle is given as

v = r w

5.6 = (0.40) w

w = 14 rad/s

Radians per second. ω ω = 14 rad/s

Calculation2:

v' = speed of blue dot

Speed blue of dot is given as

v' = v + rw

v' = 5.6 + (0.40) (14)

v' = 11.2 m/s

The speed of the blue dot when it is 0.80 m above the road is 11.2 m/s

To know more about speed visit:-

https://brainly.com/question/28224010

#SPJ4

Question:

Express your answer in radians per second. ω ω = 14 rad/s Previous Answers Correct Part B What is the speed of the blue dot when it is 0.80 m above the road?

By changing their AIMD formulas in this way, we can make both flows converge to 3r/4 and r/4 respectively.

What is AIMD?
The AIMD (Additive Increase, Multiplicative Decrease) congestion control algorithm is a type of feedback control in which the sender increases the window size by a certain amount (additively) after each round trip time (RTT) and then reduces the window size (multiplicatively) when it detects packet loss. This algorithm is used to ensure fair sharing of the network resources.

In the given scenario, if we want to make both flows converge to 3r/4 and r/4, we can modify their AIMD formulas. We can do this by changing the rate at which the window sizes increase (i.e. the additive increase) and decrease (i.e. the multiplicative decrease).

For the flow that should end up with 3r/4, we can reduce the rate of additive increase and increase the rate of multiplicative decrease. This will make the flow increase its window size more slowly and decrease its window size more quickly, resulting in it converging to a smaller window size of 3r/4.

For the flow that should end up with r/4, we can do the opposite, i.e. increase the rate of additive increase and reduce the rate of multiplicative decrease. This will make the flow increase its window size more quickly and decrease its window size more slowly, resulting in it converging to a smaller window size of r/4.

By changing their AIMD formulas in this way, we can make both flows converge to 3r/4 and r/4 respectively.

To learn more about AIMD
https://brainly.com/question/29442152
#SPJ4

Before turning into a white dwarf, a star like the sun will spend most of its life as a main sequence star is a true statement.

Most of the time, the stars' positions in relation to one another remain constant. Convergence between Orion and Taurus is ongoing. Ursa Minor is never far from Draco. The stars appear to us as an endless backdrop painting in the sky that hardly moves in relation to one another.

As we revolve around the sun throughout the year, there are a few tiny movements. Stars farther away move more to the left and right than stars closer to us. Even if it only has a small effect, it makes sense. You'll notice that objects farther away from you move less in relation to you than ones that are closer to you if you keep your eyes fixed out into the distance as you stroll down the street.

To know more about  stars visit : brainly.com/question/21521087

#SPJ4

They typically avoid collision as they pass by the stars in the opposite galaxy.

What happens to stars when galaxies collide?

To learn more about galaxies collide refer: brainly.com/question/24806910

#SPJ4

The wall separating Henri from his manager made it hard to hear what his manager was saying, the wall is an example of a physical barrier.

Physical barrier is the environmental and natural condition that act as a barrier in communication in sending message from sender to receiver.

Therefore the wall between Henri and his manager acts as a physics barrier which made it hard to hear what his manager is saying.

To know more about  physical barrier,

https://brainly.com/question/25798085

#SPJ4

Tactile receptors are the most numerous type of receptors.

To know more about receptors visit:

https://brainly.com/question/19026854

#SPJ1

0.88m/s is the the acceleration when the girl is pulling the wagon at an angle of 36.9 degrees. She is pulling with a force of 50N and the boy is pushing with a force of 30N. The mass of the wagon and books together is 90kg.

A force is an influence that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

The given data :

Pushing force by boy =30N

pulling force by Girl=50N

Mass of wagon and books together= 90kg

angle of pulling =36.9 degree

so the acceleration will be=F/m

hence net force =30+50N=80N

a=80/90

a=0.88m/s

Hence, 0.88m/s is the the acceleration when the girl is pulling the wagon at an angle of 36.9 degrees. She is pulling with a force of 50N and the boy is pushing with a force of 30N. The mass of the wagon and books together is 90kg.

to know more about Force visit

https://brainly.com/question/13191643

#SPJ1

Most of the cloud's thermal energy must be radiated away.

The cloud must constantly produce new dust particles. A collision with another cloud is required. Most of the cloud's thermal energy must be trapped there. Star formation depends significantly on angular momentum.

Low, dense clouds mainly serve to deflect solar energy and chill the Earth's surface. High, thin clouds mostly reflect incoming solar radiation; but, they also trap part of the infrared radiation that the Earth emits and reflect it back down, warming the Earth's surface.

The amount of emission from a cloud changes directly with its temperature in addition to being influenced by a number of other elements, including the thickness of the cloud and the composition of the cloud.

To know more about cloud's thermal

https://brainly.com/question/8672562

#SPJ4

The possible wavelengths of the out-of-tune guitar are "6.48 cm" and "6.52 cm".

[tex]\lambda_=speed of sound/f[/tex]

[tex]\lambda=343m/s/5293.9Hz(OR) 343m/s/5259.9Hz[/tex]

λ = 6.48 cm (OR) 6.52 cm

Other wavelengths can travel as far as the cosmos due to the inverse relationship between wave frequency and wavelength, however gamma rays have incredibly short wavelengths that are only a small portion of the size of atoms.

Regardless of the medium through which electromagnetic radiation travels, even though it isn't normally stated explicitly, the wavelengths of electromagnetic radiation are frequently represented in terms of the vacuum wavelength.

The wavelength of electromagnetic radiation affects its behavior. The speed of light is equal to wavelength times frequency. Frequency is multiplied by the Planck constant to produce energy. 1/wavelength is the wave number in centimeters. Along with the wavelengths of many parts of the electromagnetic spectrum, a rough estimation of the wavelength size is displayed.

To know more about  wavelength visit : brainly.com/question/14530620

#SPJ4

Brightness is to light as loudness is to sound.

Brightness is the visual attribute by which a light source appears to emit or reflect light. In other words, brightness is the perception caused by the brightness of a visual object. Not necessarily proportional to luminance.

Loudness is often confused with volume. However, the two terms are completely different concepts. Loudness is a scientific measure of the amount or strength of sound. Loudness, on the other hand, is much more difficult to quantify as it is entirely subjective and based solely on your personal perception of sound. The frequency content, duration, and loudness of a sound are factors in how loudness is perceived.

Can learn more about the stimuli from https://brainly.com/question/12533082

#SPJ1

Answer: Intensity of earthquakes

Explanation:

The Mercalli intensity scale is a scale to measure the intensity of earthquakes. Unlike the Richter scale, the Mercalli scale does not take into account the energy of an earthquake directly. Rather, they classify earthquakes by the effects they have.

Mass is one of the fundamental properties of an object in Physics, and is a measurement of how much matter there is in something.

To learn more about Equilibrium refer to:

https://brainly.com/question/25095705

#SPJ4