190 students sit in an auditorium listening to a physics lecture. Because they are thinking hard, each is using 125 W of metabolic power, slightly more than they would use at rest. An air conditioner with a COP of 5.0 is being used to keep the room at a constant temperature. What minimum electric power must be used to operate the air conditioner?

Answers

Answer 1

Answer:

W = 4.75 KW

Explanation:

First, we will calculate the heat to be removed:

Q = (No. of students)(Metabolic Power of Each Student)

Q = (190)(125 W)

Q = 23750 W = 23.75 KW

Now the formula of COP is:

[tex]COP = \frac{Q}{W}\\\\W = \frac{Q}{COP}\\\\W = \frac{23.75\ KW}{5}\\\\[/tex]

W = 4.75 KW


Related Questions

You are trying to push a 14 kg canoe across a beach to get it to a lake. Initially, the canoe is at rest, and you exert a force over a distance of 5 m until it has a speed of 2.1 m/s.
a. How much work was done on the canoe?
b. The coefficient of kinetic friction between the canoe and the beach is 0.2. How much work was done by friction on the canoe?
c. How much work did you perform on the canoe?
d. What force did you apply to the canoe?

Answers

Answer:

I hope this is correct!

Explanation:

a) work = (force)(displacement)

We know that d = 5m, now we just need to find the force

We need to calculate the acceleration first using a = v^2 - u^2 / 2d

final velocity (v) = 2.1 m/s , initial velocity (u) = 0 m/s , displacement (d) = 5m

a = 2.1^2 - 0^2 / 2(5)

  = 0.441 m/s^2

Now we can find force using f = ma

f = (14kg)(0.441m/s^2)

 = 6.174 newtons

Finally, you can calculate work now that you have force!

work = (6.174n)(5m)

       = 30.87 J (you may need to round sig figs!)

b) Work done by friction = (coefficient of kinetic friction)(mg)(v)

m = 14kg, g = 9.8, coefficient of friction = 0.2

force due to friction = (0.2)(14kg x 9.8)(2.1)

                                 = 57.624 J (again you may need to round to sig figs)

c) Work you perform = total work in direction of motion + work done by friction

total work = 30.87 J, work done by friction = 57.624 J

Work you perform = 30.84 + 57.624

                               = 88.464 J

d) Force you applied = work you performed / distance

work you performed = 88.464 / 5 m

                                   = 17.6929 N (again you may need to round to sig figs)

Hope this helps ya! Best of luck <3

Which of the following measures is equal to 700 km?

Answers

Answer:

1km=1000m

700km=

700×1000=700000

=700000metres

hope this helps


.. Solve: 91
Find the half angular width of the central bright maximum in the Fraunhofer diffraction pattern of
a slit of width 12x10^-5 cm when the slit illuminated by monochromatic light of wave length
6000 A
[KUET’10-11)
(a) 30°
(b) 60°
(c) 15°
(d) None of these
Solution

Answers

Explanation:

bro I have no idea fam......

The car has a mass of 0·50 kg. The boy
now increases the speed of the car to 6·0
ms-1 . The total radial friction between
the car and the track has a maximum
value of 7.0 N. Show by calculation that
the car cannot continue to travel in the circular path.

Answers

Answer:

A solenoid is a type of electromagnet, the purpose of which is to generate a controlled magnetic field through a coil wound into a tightly packed helix. The coil can be arranged to produce a uniform magnetic field in a volume of space when an electric current is passed through it.

The car cannot continue to travel in the circular path, if the radius of the circular track is less than 2.57 m.

What is meant by centripetal force ?

Centripetal force is described as the force applied to a body that is travelling in a circular motion and is pointed in the direction towards the center of the circular path.

Here,

Mass of the car, m = 0.5 kg

Velocity of the car, v = 6 m/s

Radial friction between the car and the track, f = 7 N

The necessary centripetal force for the car to execute the circular motion is provided by the maximum radial frictional force between the car and the track.

So, the condition that the car cannot continue to travel in the circular path is that the centripetal force required is greater than the maximum radial friction.

So,

mv²/r > f

0.5 x 6²/r > 7

Therefore, the radius of the circular track,

r < 18/7

r < 2.57 m

Hence,

The car cannot continue to travel in the circular path, if the radius of the circular track is less than 2.57 m.

To learn more about centripetal force, click:

https://brainly.com/question/14249440

#SPJ3

(c) It takes you hours to to bring the turkey from to . During that time, the electrical grid transfers a constant Watts of power into the the oven. Take the turkey and the air in the oven to be your system. What was the thermal transfer of energy between the system and the surroundings

Answers

Complete Question

(c) It takes you 5 hours to to bring the turkey from 10.0°C to 75.0 °C. During that time, the electrical grid transfers a constant 2500.0 Watts of power into the the oven. Take the turkey and the air in the oven to be your system. What was the thermal transfer of energy between the system and the surroundings?

Answer:

[tex]Q=4.50 *10^7J[/tex]

Explanation:

From the question we are told that:

Time [tex]t=5hours[/tex]

Temperature rise [tex]dT= 65\textdegree[/tex]

Power [tex]P=2500.0 Watts[/tex]

Generally, the equation for Power is mathematically given by

[tex]P=\frac{Q}{t}[/tex]

Therefore

[tex]Q=2500*5*360[/tex]

[tex]Q=4.50 *10^7J[/tex]

how much heat is produced in one hour by an electric iron which draws 2.5ampere when connected to a 100V supply​

Answers

Explanation:

I=2.5 Ampere ; V=100V ;t = 1 hour=60secs

We know Heat = VIt

H=100×2.5×60=15,000J

krichoffs law of current questions​

Answers

Answer:

Explanation:

       Kirchhoff's Current Law, often shortened to KCL, states that “The algebraic sum of all currents entering and exiting a node must equal zero.

           #I AM ILLITERATE

You want to swim from one side of a river to another side. Assume your speed is three miles per hour in the west direction, with negligible water velocity. When you reach a certain point, you will encounter water flow with a velocity of 6.2 miles per hour in the north direction. What is your resultant speed and direction

Answers

Answer:

speed = 6.71 mph and angle is 71.2 degree.

Explanation:

speed of person, u = 3 miles per hour

speed of water, v = 6 miles per hour

Resultant speed

[tex]V =\sqrt{v^2 + u^2}\\\\V = \sqrt{3^2 + 6^2}\\\\V = 6.71 mph[/tex]

The angle from the west is

tan A = 6/2 = 3

A = 71.6 degree

explain why our sweat is salty?​

Answers

Answer:

Sweat also contains ammonia and urea, which are produced by the body when it breaks down proteins from the foods you eat.

Hope this helps..

Which of the following describes an electric conductor

Answers

The following describes an electric conductor : A material that has low resistance and allows the charges to move freely. The correct option is D.

What is conductor?

A conductor is a material or metal which allows the electrons to flow through it. In other words, a conductor allows the current to pass through them.

A battery also called as the voltage source, provides sufficient voltage or energy to excite electrons in the conductor.

Opposition offered to the flow of current is called as the resistance. The electrical element used in the circuit is the resistor.

So, an electric conductor is a material that has low resistance and allows the charges to move freely.

Thus, the correct option is D.

Learn more about conductor.

https://brainly.com/question/18084972

#SPJ5

Cho hai mặt cầu đồng tâm O tích điện đều. Bán kính của hai mặt cầu lần lượt là R1 và R2 (R2>R1). Điện tích mặt trong là q và mặt ngoài là Q
Tính cường độ điện trường tại một điểm cách tâm O một đoạn r (biết R1 < r < R2)
Tính hiệu điện thế giữa hai mặt cầu

Answers

Answer:

you will stc ohxoyxct txxtx xigigjjgjvvixiffjz,iffzikzfjvixii. hi h ohigiogooigoh

Explanation:

k jjvhvojvovvojivivivihvi hj

Two loudspeakers are placed 1.8 m apart. They play tones of equal frequency. If you stand 3.0 m in front of the speakers, and exactly between them, you hear a minimum of intensity. As you walk parallel to the plane of the speakers, staying 3.0 m away, the sound intensity increases until reaching a maximum when you are directly in front of one of the speakers. The speed of sound

Answers

The question is incomplete. The complete question is :

Two loudspeakers are placed 1.8 m apart. They play tones of equal frequency. If you stand 3.0 m in front of the speakers, and exactly between them, you hear a minimum of intensity. As you walk parallel to the plane of the speakers, staying 3.0 m away, the sound intensity increases until reaching a maximum when you are directly in front of one of the speakers. The speed of sound in the room is 340 m/s.

What is the frequency of the sound?

Solution :

Given :

The distance between the two loud speakers, [tex]d = 1.8 \ m[/tex]

The speaker are in phase and so the path difference is zero constructive interference occurs.

At the point [tex]D[/tex], the speakers are out of phase and so the path difference is [tex]$=\frac{\lambda}{2}$[/tex]

Therefore,

[tex]$AD-BD = \frac{\lambda}{2}[/tex]

[tex]$\sqrt{(1.8)^2+(3)^2-3} =\frac{\lambda}{2}$[/tex]

[tex]$\lambda = 2 \times 0.4985$[/tex]

[tex]$\lambda = 0.99714 \ m$[/tex]

Thus the frequency is :

[tex]$f=\frac{v}{\lambda}$[/tex]

[tex]$f=\frac{340}{0.99714}$[/tex]

[tex]f=340.9744[/tex] Hz

Do you believe in ghost​

Answers

Answer:

well its about our thinking but i do believe in ghost a little

In order to test an intentionally weak adhesive, the bottom of the small 0.15-lb block is coated with adhesive and then the block is pressed onto the turntable with a known force. The turntable starts from rest at t = 0 and uniformly accelerates with a = 2 rad/s^2. If the adhesive fails at exactly t = 3 s, then determine:

a. the magnitude of the ultimate shear force that the adhesive supports
b. the angular displacement of the turntable at the time of failure

Answers

Answer:

answer

Explanation:

it is the answer which was presented in the year

A 1.50 kg book is sliding along a rough horizontal surface. At point A it is moving at 3.21 m/s , and at point B it has slowed to 1.25 m/s .
Part A
How much work was done on the book between A and B ?
Part B
If -0.750J of work is done on the book from B to C , how fast is it moving at point C ?
Part C
How fast would it be moving at C if 0.750J of work were done on it from B to C ?

Answers

I assume friction is the only force acting on the book as it slides.

(A) By the work-energy theorem, the total work performed on the book as it slides is equal to the change in its kinetic energy:

W = ∆K

W = 1/2 (1.50 kg) (1.25 m/s)² - 1/2 (1.50 kg) (3.21 m/s)²

W-6.56 J

(B) Using the work-energy theorem again, the speed v of the book at point C is such that

-0.750 J = 1/2 (1.50 kg) v ² - 1/2 (1.50 kg) (1.25 m/s)²

==>   v = 0.750 m/s

(C) Take the left side to be positive, then solve again for v.

0.750 J = 1/2 (1.50 kg) v ² - 1/2 (1.50 kg) (1.25 m/s)²

==>   v1.60 m/s

Choose one. 5 points
Use the equation from week 3:
frequency =
wavespeed
wavelength
and the wavelength you found in #3 to calculate the frequency of this photon (remember the speed of
light is 3E8 m/s);
7.6E14 Hz
6.0E14 Hz
4,6E14 Hz

Answers

Is 4,6E14 Hz
Good luck

The frequency is 4,6E14 Hz.

What is the frequency?

Frequency is the fee at which modern changes direction in step with 2nd. it's far measured in hertz (Hz), a worldwide unit of degree wherein 1 hertz is identical to 1 cycle in line with 2d. Hertz (Hz) = One hertz is the same as 1 cycle in step with the second. Cycle = One entire wave of alternating present-day voltage.

Frequency describes the number of waves that pass a hard and fast place in a given quantity of time. So if the time it takes for a wave to skip is half of 2d, the frequency is 2 per 2nd. If it takes 1/one hundred of an hour, the frequency is a hundred in step with hour.

Learn more about frequency here:-https://brainly.com/question/254161

#SPJ2

If the horizontal range and the max height of a body projected at an angle titre to the horizontal is K and Q respectively. Show that the muzzle velocity Vo is given by: Vo=√[2gQ + K²/8Q]​

Answers

Explanation:

Recall that

[tex]K = \dfrac{v_0^2\sin2\theta}{g}\:\:\:\:\:\:\:\:\:(1)[/tex]

and

[tex]Q = \dfrac{v_0^2\sin^2\theta}{2g}\:\:\:\:\:\:\:\:\:(2)[/tex]

From Eqn(2), we can write

[tex]\sin\theta = \sqrt{\dfrac{2gQ}{v_0^2}}\:\:\:\:\:\:\:\:\:(3)[/tex]

Using the identity [tex]\sin\theta = 2\sin\theta \cos\theta[/tex], we can rewrite Eqn(1) as

[tex]\dfrac{gK}{2v_0^2} = \sin\theta \cos\theta[/tex]

Squaring the above equation, we get

[tex]\dfrac{g^2K^2}{4v_0^4} = \sin^2\theta \cos^2\theta[/tex]

[tex]\:\:\:\:\:\:\:\:\:=\sin^2\theta(1 - \sin^2\theta)\:\:\:\:\:\:\:(4)[/tex]

Use Eqn(3) on Eqn(4) and we will get the following:

[tex]\dfrac{g^2K^2}{4v_0^4} = \dfrac{2gQ}{v_0^2}(1 - \dfrac{2gQ}{v_0^2})[/tex]

This simplifies to

[tex]\dfrac{gK^2}{8v_0^2Q} = 1 - \dfrac{2gQ}{v_0^2}[/tex]

Rearranging this further, we get

[tex]1 = \dfrac{2gQ}{v_0^2} + \dfrac{gK^2}{8v_0^2Q}[/tex]

Putting [tex]v_0^2[/tex] to the left side, we get

[tex]v_0^2 = 2qQ + \dfrac{gK^2}{8Q}[/tex]

Finally, taking the square root of the equation above, we get the expression for the muzzle velocity [tex]v_0[/tex] as

[tex]v_0 = \sqrt{2gQ + \dfrac{gK^2}{8Q}}[/tex]

A race car goes from a complete stop at the start line to 150 miles per hour in 5 seconds. What is its acceleration? Show your work.

Answers

Answer:

Explanation:

150/5  = 30

30mph per 1 second

A wire long and with mass is positioned horizontally near the earth's surface and perpendicular to a horizontal magnetic field of magnitude . What current I must flow through the wire in order that the wire accelerate neither upwards nor downwards

Answers

The question is incomplete. The complete question is :

A wire 0.6 m long and with mass m = 11 g is positioned horizontally near the earth's surface and perpendicular to a horizontal magnetic field of magnitude B = 0.4 T. What current I must flow through the wire in order that the wire accelerate neither upwards nor downwards? The magnetic field is directed into the page.

Solution :

Given :

Length of the wire, L = 0.6 m

Mass of the wire length, m = 11 g

                                             = [tex]11 \times 10^{-3}[/tex] kg

Magnetic field , B = 0.4 T

Know we know that :

ILB = mg

or [tex]$I=\frac{mg}{BL}$[/tex]

 [tex]$I= \frac{(11 \times 10^{-3})(9.81)}{(0.4)(0.6)}$[/tex]

 [tex]I=0.44963\ A[/tex]

 [tex]I = 449.63 \ mA[/tex]

01.04 Law of Conservation of Energy
science question

Answers

Answer:

 law of conservation of energy states that the total energy of an isolated system remains constant; it is said to be conserved over time.

A student of mass 50kg takes 15seconds to run up a flight of 50 steps. If each step is 20cm, calculate the potential energy of the student at the maximum height

Answers

Answer:

the answer is 49000 joules at the maximum height

Explanation:

we know the mass (50kg)

we know the acceleration due to gravity(9.8m/s²)

we know the height too(maximum height meaning the 50th step so we multiply 50 with 20cm as each step is 20 cm and we get 1000 cm, convert to m it is 100 m

the formula is potential energy=mgh

m for mass

g for acceleration due to gravity

h for height

multiply them

50x9.8x100

we get 49000

the unit of potential energy is joules so the answer is

49000 joules

Answer:

49000 joules

Explanation:

hope it helpss

A 150g copper bowl contains 220g of water, both at 20.0oC, A very hot 300 g copper cylinder is dropped into the water, causing the water to boil, with 5.00 g being converted to steam. The final temperature of the system is 100oC, Neglect energy transfers with the environment.
a) How much energy (in calories) is transfered to the water as heat?
b) How much to the bowl?
c) What is the original temperature of the cylinder?

Answers

We have that the  energy (in calories) is transferred to the water as heat,to the bowl and  the original temperature of the cylinder  is mathematically given as

Qw=20.3 kcal Q= 1.11 kcal Ti=873°C

Energy

Generally the equation for the   is mathematically given as

(a)

The heat transferred to the H20

Qw= CwMwdT+Lvms

Qw=((220g)(100°C-20.0T)+(539 caVg)(5.00 g)

Qw=20.3 kcal .

(b)

The heat transferred to the bowl is

Qb= CbmbdT

Q= (0.0923 cal/gC)(150g)(100°C-20.0°C)

Q= 1.11 kcal

(c)  

original temperature of the cylinder

-Qw- Qb = CcMc(T2-T1)

[tex]T1=\frac{Qw+Qm}{CcMc}+T2[/tex]

T1=873C

For more information on energy visit

https://brainly.com/question/21222010

RATIO of longest wavelengths corresponding to Lyman and Balmer series in hydrogen spectrum is:
1) 7/29
2) 9/31
3) 5/27
4) 5/23​

Answers

Answer:

[tex]5/27[/tex]

Explanation:

wavelengths for Lyman series

[tex]\lambda=\frac{1}{R(1-\frac{1}{4} })=\frac{4}{3R}[/tex]

wavelengths for Balmer series

[tex]\lambda_B=\frac{1}{R(\frac{1}{4}-\frac{1}{9}) } =\frac{1}{R(\frac{5}{36}) } =\frac{36}{5R}[/tex]

[tex]\frac{ \lambda_L}{ \lambda_B} =\frac{4}{3R} \times\frac{5R}{36} =5/27[/tex]

OAmalOHopeO

The ratio of longest wavelengths corresponding to the Lyman and Balmer series in the hydrogen spectrum is 5/27. The correct option is 3.

What is Lyman and Balmer series?

Lyman and Balmer series are sets of spectral lines in the emission spectrum of hydrogen, which result from the transitions of the electron from higher energy levels to lower energy levels.

The Lyman series consists of spectral lines that are produced by transitions of the electron from higher energy levels to the n=1 energy level. These transitions release energy in the form of ultraviolet photons. The lowest energy level in hydrogen is the n=1 energy level, which is also called the ground state. Therefore, the Lyman series includes the transition of the electron from any energy level greater than or equal to n=2 to the ground state.

The Balmer series consists of spectral lines that are produced by transitions of the electron from higher energy levels to the n=2 energy level. These transitions release energy in the form of visible photons. The lowest energy level in the Balmer series is the n=2 energy level. Therefore, the Balmer series includes the transition of the electron from any energy level greater than or equal to n=3 to the n=2 energy level.

Lyman and Balmer's series are named after the scientists who discovered them. The Lyman series is named after Theodore Lyman, an American physicist who discovered the series in 1906. The Balmer series is named after Johann Balmer, a Swiss mathematician who discovered the series in 1885.

Here in the Question,

The longest wavelength in the Lyman series of the hydrogen spectrum corresponds to the transition from the n = 2 energy level to the n = 1 energy level, while the longest wavelength in the Balmer series corresponds to the transition from the n = 3 energy level to the n = 2 energy level.

The wavelengths of these transitions can be calculated using the Rydberg formula:

1/λ = R(1/n1^2 - 1/n2^2)

where λ is the wavelength of the photon emitted, R is the Rydberg constant (1.097 × 10^7 m^-1), and n1 and n2 are the initial and final energy levels of the electron.

For the longest wavelength in the Lyman series, we have n1 = 2 and n2 = 1, so:

1/λ_lyman = R(1/2^2 - 1/1^2) = 3R/4

For the longest wavelength in the Balmer series, we have n1 = 3 and n2 = 2, so:

1/λ_balmer = R(1/3^2 - 1/2^2) = 5R/36

Therefore, the ratio of the longest wavelengths in the Lyman and Balmer series is:

λ_lyman/λ_balmer = (3R/4)/(5R/36) = 27/20

Simplifying this ratio gives:

λ_lyman/λ_balmer = 27/20

Multiplying both the numerator and denominator by 1/3R, we get:

λ_lyman/λ_balmer = (1/2)/(1/3) = 3/2

Therefore, the ratio of the longest wavelengths in the Lyman and Balmer series is 3:2, or 3/5 in fractional form. Simplifying this ratio gives:

λ_lyman/λ_balmer = 5/3

Taking the reciprocal of both sides, we get:

λ_balmer/λ_lyman = 3/5

Therefore, the correct answer is (3) 5/27.

To learn about the ratio of the minimum wavelength of Lyman and Balmer series click:

https://brainly.com/question/12725892

#SPJ2

Two different galvanometers G1 and G2, have internal resistances r1and r2. The galvanometers G1 and G2 require the same current IC1=IC2 for a full-scale deflection of their pointers. These galvanometers G1 and G2 are used to build lab-made ammeters A1 and A2 . Both ammeters A1 and A2 have the same maximum scale reading Imax1=Imax2=Imax. To build A1 ,shunt resistor of resistance Rsh1is used and to build A2 , shunt resistor of resistance Rsh2 is used. The value of these shunt resistor resistances are such that: Rsh1=3Rsh2. What is the ratio oftheir internal resistances: r1:r2?

Answers

Answer:

there are 3 photos attached. so check

Explanation:

While standing at the edge of the roof of a building, a man throws a stone upward with an initial speed of 6.63 m/s. The stone subsequently falls to the ground, which is 14.5 m below the point where the stone leaves his hand.

At what speed does the stone impact the ground? Ignore air resistance and use =9.81 m/s2 for the acceleration due to gravity.
How much time is the stone in the air?
elapsed time:

Answers

Answer:

Speed=28.1m/s(to 3s.f.) , Time=2.19s(to 3s.f.)

Explanation:

Time=Distance/Speed

=14.5/6.63

=2.19s(to 3s.f.)

Acceleration=Final Velocity(v)-Initial Velocity(u)/Time

9.81=v-6.63/2.19

v-6.63=21.5

v=28.1m/s

potential diffetence​

Answers

Answer:

6v

Explanation:

V=IR

V= 2* 3

V= 6 volts

which watch is more preferable for the measurement of time among pendulum, quartz and atomic watch

Answers

Answer:

pendulum, quartz

Explanation:

A rabbit is moving in the positive x-direction at 2.70 m/s when it spots a predator and accelerates to a velocity of 13.3 m/s along the positive y-axis, all in 2.40 s. Determine the x-component and the y-component of the rabbit's acceleration.

Answers

Answer:

the answer is nearly 5.655 [tex]ms^{-2}[/tex]

Explanation:

Given,

[tex]v_{x}=2.7 ms^{-1}[/tex]

[tex]v_{y}=13.3 ms^{-1}[/tex]

[tex]t=2.4 s[/tex]

[tex]a_{x}=\frac{2.7}{2.4}=1.125 ms^{-2}[/tex] (as  [tex]a=\frac{v-u}{t}[/tex])

[tex]a_{y}=\frac{13.3}{2.4}=5.542 ms^{-2}[/tex]

[tex]a=\sqrt{a_{x}^{2}+a_{y}^{2} }[/tex]

[tex]=\sqrt{1.125^{2}+5.542^{2} }[/tex]

[tex]=5.655 ms^{-2}[/tex]

hope you have understood this...

pls mark my answer as the brainliest

When you have a straight horizontal line on a velocity time graph, what does this tell you about the object’s motion in terms of velocity and acceleration?

Answers

Answer:

It tell you that the velocity is constant, what means that there's no acceleration

A 69.0-kg astronaut is floating in space, luckily he has his trusty 28.0-kg physics book. He throws his physics book and accelerates at 0.0130 m/s2 in the opposite direction. What is the magnitude of the acceleration of the physics book?

Answers

Answer:

0.032 [tex]m/s^2[/tex]

Explanation:

Given :

Weight of the astronaut = 69 kg

Weight of the physics book = 28 kg

Acceleration of the astronaut = 0.0130 [tex]m/s^2[/tex]

The force that is applied on the astronaut :

[tex]F=ma[/tex]

   [tex]$=69 \times 0.013$[/tex]

   = 0.897 N

Therefore, by Newton's 3rd law, we know that the force applied on the physics book is also F = 0.897 N

Therefore, the acceleration of the physics book is given by :

[tex]$a = \frac{\text{Force on physics book}}{\text{mass of physics book}}$[/tex]

[tex]$a = \frac{0.897}{28}$[/tex]

a = 0.032 [tex]m/s^2[/tex]

Hence, the acceleration of the physics book is  0.032 [tex]m/s^2[/tex].

Answer:

The acceleration of astronaut is 5.27 x 10^-3 m/s^2.

Explanation:

mass of astronaut, M = 69 kg

Mass of book, m = 28 kg

acceleration of book, a = 0.013 m/s^2

Let the acceleration of astronaut is A.

According to the Newton's third law, for every action there is an equal and opposite reaction.

So, the force acting on the book is same as the force acting on the astronaut but the direction is opposite to each other.

M A = m a

69 x A = 28 x 0.013

A = 5.27 x 10^-3 m/s^2

Other Questions
A waitress pours 3/4 gallon of orange juice equally into 5 pitchers. what fraction of a gallon of orange juice is in each pitcher? Which functions represent a vertical stretch of the parent function, f(x) = 1/x? Check all that apply.g(x) = 3/xg(x) = -2/xg(x) = 1/4xg(x) = 5/2xg(x) = 1/2x Regarding the models of cooperativity:_______. a. the concerted model is based on theb. T state and the sequential on the R state. c. T state is low affinity and R state is high affinity. d. the concerted model and the sequential model are mutually exclusive. e. these models, strictly speaking, only apply to tetramers. A town planned to build a new street through a parcel of vacant land on the edge of town. The land records show a deed dated October 5, 1947, to the current property owner, for whom an address is given in the capital city of the state. The town instituted an in rem condemnation action in state court, with notice to all interested parties published in the town newspaper. The property owner, who still resides at the address in the capital city, does not see the notice. The court allows the condemnation to proceed as requested by the town.Is the condemnation valid as to the property owner?A: Yes, because a court has jurisdiction over the subject matter.B: Yes, because notice by publication was sufficient.C: No, because the property owner was required to be served by summons.D: No, because the property owner should have been mailed notice of the proceeding. name least to greatest37803.780.3783780.0378 What are 5 typical dishes/items served in Chihuahua, Mexico for breakfast, lunch, dinner, and drinks? "HEALTH education helps to make healthier life".justify Ms. Lowder has 2 children, one in first grade and one in fifth grade. Both children need paper for school. Paper costs $2.29 per pack. If the first grader needs 2 packs of paper and the fifth grader needs 6 packs of paper, how much money will Ms. Lowder spend on paper? Cules son los aspectos que debemos considerar para tener una viva dign? Ayudaaaaa Simplify 6 - (-2) - 3(-5).-11-71923 (5, 4)11-5-2)16.nat's the slope-intercept form of the equation of the line graphed in this figure?O A. y = 5/3x + 1O B.y=-3x + 1O C. y = 3x + 1O D.y = -5/3X - 1 Convert 84 miles to kilometers (there are 0.6 miles in a kilometer) using the method dimensional analysis what was the UN's reaction to the invasion of south korea After the protagonist confronts the murderer at the story's climax and brings him to justice, the story continues and the protagonist explains how he discovered the murderer's identity. The part of the story that occurs after the climax is falling action.symbolism.plot.rising action. The connection of the term magic potion supports which tone Three blocks are shown: Three blocks are shown. Block A has mass 3 kilograms, length 6 centimeters, height 4 centimeters, and width 2 centimeters. Block B has mass 1 kilograms, length 6 centimeters, height 2 centimeters, and width 4 centimeters. Block C has mass 2 kilograms, length 2 centimeters, height 6 centimeters, and width 4 centimeters. Which statement is correct? Block A has the greatest density. Block B has the greatest density. The density of Block A is equal to the density of Block B. The density of Block B is equal to the density of Block C. How tall is Robert? He is tall 177 centimeters. He talls 177 centimeters. He is 177 centimeters tall. The entrance ticket for a carnival costs $89.97, which includes a royal mealthat costs $10.85, 1 play station game, and 3 water rides (Each water ridecosts the same price). The cost of a water ride is twice as that of a playstation game. Find the cost of a water ride. Estimate to the nearest tenths. Which of the following is an example of a mixed cost? a. electricity costs of $3 per kilowatt-hour b. salary of a factory supervisor c. rental costs of $10,000 per month plus $0.30 per machine hour of use d. straight-line depreciation on factory equipment What did John Adams' father do duringthe winter to keep earning an income?A. He made wagon wheels.B. He herded cattle.C. He was a shoe maker.D. He delivered mail.