Answer:
7.3 g/cubic cm
Explanation:
You divide the mass by the volume to calculate the density of the metal.
146g ÷ 20cm³ = 7.3g/cm³
An image of a car with height of 14 cm occurred in the mirror which is located at a T-
intersection. If the car height is 140 cm and the radius of the curvature of the mirror is 60 cm,
how far is the car from the mirror?
helpp me!!!!!!
Answer:
The distance of car form the mirror is 330 cm.
Explanation:
height of object, h = 140 cm
height of image, h' = 14 cm
radius of curvature, R = 60 cm
focal length, f = R/2 = + 30 cm
Let the distance of image is v and the distance of object is u.
[tex]\frac{h'}{h}\frac{v}{u}\\\\\frac{14}{140} =\frac{v}{u}\\\\v =\frac{u}{10}[/tex]
Use the formula of focal length
[tex]\frac{1}{f}=\frac{1}{v}+\frac{1}{u}\\\\\frac{1}{30}=\frac{10}{u}+\frac{1}{u}\\\\\frac{1}{30}=\frac{11}{u}\\\\u = 330 cm[/tex]
1. Determine the magnitude of two equal but opposite charges if they attract one another with a force of 0.7N when at distance of 0.3m apart in a vacuum.
Answer:
q = 2.65 10⁻⁶ C
Explanation:
For this exercise we use Coulomb's law
F =[tex]k \frac{q_1q_2}{r^2}[/tex]
In this case they indicate that the load is of equal magnitude
q₁ = q₂ = q
the force is attractive because the signs of the charges are opposite
F = [tex]k \ \frac{q^2}{r^2}[/tex]
q = [tex]\sqrt{\frac{F \ r^2}{k} }[/tex]
we calculate
q = [tex]\sqrt{\frac{0.7 \ 0.3^2 }{9 \ 10^9} }[/tex]
q = [tex]\sqrt{7 \ 10^{-12} }[/tex]Ra 7 10-12
q = 2.65 10⁻⁶ C
Chapter 1
3.
The centre of gravity is usually located where
A no mass is concentrated.
B average mass is concentrated.
Cless mass is concentrated.
D more mass is concentrated.
Answer:
D. more mass is concentrated.
Explanation:
Gravity is considered to be a universal force of attraction which acts between all objects that has both mass, energy and occupy space. Therefore, it acts in such a way as to bring objects together.
Additionally, the gravity of earth makes it possible for all physical objects to possess weight.
Newton's law of universal gravitation states that the force of attraction (gravity) acting between the Earth and all physical objects is directly proportional to the Earth's mass, directly proportional to the physical object's mass and inversely proportional to the square of the distance separating the Earth's center and that physical object.
Center of gravity can be defined as the specific point where all of the weight of an object is concentrated.
Generally, all the objects found around the world all have a center of gravity.
Additionally, when an object is balanced so that a displacement lowers its center of gravity, the object is said to be in stable equilibrium.
The centre of gravity of a physical object is usually located where more mass is concentrated in the physical object or body.
However, the location of the centre of gravity is subject to change and as such doesn't always remain the same.
Magnetic force between the north poles of two magnets is
Magnetic force between the north poles of two magnets is REPULSIVE
Answer:Repulsion or attraction
Explanation:The angle between the compass needle and geographic north is called the MAGNETIC DECLINATION.(see earth:the magnetic field of the earth ). The repulsion or attraction between two magnetic dipoles can be viewed as the interaction of one dipole with the magnetic field produced by other dipole.
Consider the stress-strain diagram shown here. Assume all four material samples (A-D) were originally the same size and shape. Identify the material with the highest yield strength:
Stress-strain diagram with 4 materials graphed.
A
B
C
D
Answer:
B
Explanation:
Stress-strain diagram with 4 materials graphed. The graph with maximum yield strength is B.
What is stress?Stress is defined as the force applied per unit area of cross-section. It is denoted by Sigma(σ). Its's unit is same as the pressure i.e. N/m².
Considering the stress-strain diagram shown here. Assumed all four material samples denoted as (A-D) were originally the same size and shape.
When a body is stretched by a tensile force, it stretches more and more until it reaches its elastic limit. There comes a point where the body no longer stretches. The change in stress is very less and the stress is greater at the yield point. The strength required up to the yield point is called as the yield strength. The body breaks while forming the neck of the bottle. This strength of any material is known as ultimate stress at break or ultimate tensile strength.
So, the material with the highest yield strength is B.
Thus, the correct option is B.
Learn more about Stress.
https://brainly.com/question/12871096
#SPJ5
In a given chemical reaction the energy of the products is less than the energy of the reactants which statement is true for this chemical reaction
Group of answer choices.
A. Energy is absorbed in the reaction.
B. Energy is released in the reaction.
C. There is no transfer of energy in the reaction.
D. Energy is lost in the reaction.
Answer:
B. Energy is released in the reaction.
Explanation:
A chemical reaction can be defined as a chemical process which typically involves the transformation or rearrangement of the atomic, ionic or molecular structure of an element through the breakdown and formation of chemical bonds to produce a new compound or substance.
Basically, there are two (2) main types of chemical reaction and these include;
I. Endothermic reaction: it's a chemical reaction in which heat is absorbed
II. Exothermic reaction: it's a chemical reaction in which heat is liberated into the environment.
In Chemistry, all chemical equation must follow or be in accordance with the Law of Conservation of Mass, which states that mass can neither be created nor destroyed by either a physical transformation or a chemical reaction but transformed from one form to another in an isolated (closed) system.
Generally, energy is released in a chemical reaction when the energy of the products is less than the energy of the reactants and it is referred to as an exothermic reaction.
However, when the energy of the products is greater than the energy of the reactants, energy is absorbed and it is referred to as an endothermic reaction.
What is an essential characteristic of an object in equilibrium?
1) zero velocity
2) zero acceleration
3) zero potential energy
4) zero kinetic energy
Answer:
2) zero acceleration
Explanation:
Motion can be defined as a change in the location (position) of a physical object or body with respect to a reference point.
This ultimately implies that, motion would occur as a result of a change in location (position) of an object with respect to a reference point or frame of reference i.e where it was standing before the effect of an external force.
Mathematically, the motion of an object is described in terms of time, distance, speed, velocity, position, displacement, acceleration, etc.
In physics, acceleration can be defined as the rate of change of the velocity of an object with respect to time.
Generally, an object is said to be in equilibrium when neither the energy possessed by the object not state of motion changes with respect to time. Thus, the vector sum of all the forces acting upon an object that's in equilibrium is zero.
In conclusion, an essential characteristic of an object in equilibrium is zero (0) acceleration because there's no change in its velocity with respect to time.
Your new motorcycle weighs 2450 N.
What is
its mass in kilograms?
i understand the answer is 250kg because mass times gravity thing but why isn’t the answer negative cause gravity pulls down so wouldn’t be Negative answer not a positive answer
i was taught FW is always negative why isn’t it negative here
Answer:
Explanation:
The negative only matters reallly if you are dealing with a 2d system. I could even define down as positive and up as negative. However, usually you are taught that down is negative. It really doesn't matter because a force is a force. It is only given a direction relative to another force or vector direction.
What is physical measurement? in Science
Answer:
physical measurement comprises the measurement of objects, things, etc. and is concerned with the measurement of height, weight, length, size, volume etc.
Longitudinal waves are produced by
Making rough estimates of physical quantities is usefulA. So that you can see if the answer to a problem makes physical sense.B. Because we only use approximate numbers in problems.C. Because the laws we use are not exact, so using exact numbers is not crucial.D.So that you can compute answers doing simpler math.
Answer:
A. So that you can see if the answer to a problem makes physical sense.
Explanation:
Science can be defined as a branch of intellectual and practical study which systematically observe a body of fact in relation to the structure and behavior of non-living and living organisms (animals, plants and humans) in the natural world through experiments.
An experiment can be defined as an investigation which typically involves the process of manipulating an independent variable (the cause) in order to be able to determine or measure the dependent variable (the effect).
This ultimately implies that, an experiment can be used by scientists to show or demonstrate how a condition causes or gives rise to another i.e cause and effect, influence, behavior, etc in a sample.
Measurements refers to the process which typically involves the process of identifying and determining the dimensions of a physical object. The dimensions include important parameters such as width, height, length, area, volume, circumference etc.
In Science, making rough estimates of physical quantities is useful so that you can see if the answer to a problem makes physical sense.
For example, you could make a rough estimate of a storage tank and deductively determine whether or not it's in tandem with its physical size in reality.
When a ray enters into air from glass slab
a) its wavelength decreases
b) it's wavelength increases
c) it's frequency increases
d) it's frequency decreases
Answer:
a ) Its wavelength decreases
Explanation:
When a ray enters into air from glass slab its wavelength decreases.
I have possess'd your grace of what I purpose:And by our holy Sabbath have I swornTo have the due and forfeit of my bond.If you deny it, let the danger lightUpon your charter and your city's freedom !You'll ask me, why I rather choose to haveA weight of carrion flesh than to receiveThree thousand ducats : I'll not answer that:But, say, it is my humour(1) Whom are these lines addressed to? What is the context in which theselines are spoken?(ii) What has Shylock sworn on oath ?
Answer:
1. These lines are addressed to Duke.
2. These lines show that Shylock is not willing to forgive the debt a merchant owes him, nor is he willing to justify why he demands that debt be paid, even if it seems cruel.
3. He swore by the Holy Sabbath, which is a holy day for him, who is a Jew. He swore he would get the debt money or a piece of the debtor's flesh.
Explanation:
The lines shown in the question above refer to "The Merchant of Venice" written by Shakespeare. In this story we are introduced to Antonio, a commercial who is very prejudiced against Jews, but when he needs money, he borrows from another merchant, Shylock, who is Jewish. Shylock agrees to lend money to Antonio, but determines the date that this money must be returned, in addition, Shylock states that he will lend the money if Antonio agrees that if this money is not paid by the specified date, Antonio will have to pay with half a kilo of flesh from his own body. Antonio agrees, but doesn't pay the money so Shylock goes after the flesh of Antonio's body and Duke tries to intervene because he thinks this is too cruel. At this point, Shylock speaks the lines shown in the question above, showing that he is not willing to change his mind.
Write a hypothesis about the use of an object’s physical characteristics to determine its density. Use the format "if . . . then . . . because . . .” and be sure to answer the lesson question "How can the density of an object be determined?”
Answer:
If 2 objects have the same mass, then which object has a larger volume will have a smaller density
Explanation:
Because density is the object's mass divided by volume
health ,population and environment education is for the enrichment of quality of life,justify the statement
Answer:
hey !! here is a short and sweet answer to your question
=quality of life is directly determined by health ,education ,and life expectacy
=health Is a type of thing that gives employment to the person working in firm
hope u understand
Explanation:
que aceleración adquiere un cuerpo de 0.5 kg cuando actúa una fuerza n2
My second question for today :
Why do we ever have a blood moon?? What's the science behind it
Answer:
vhijko and eye rudiieidjdjddjjd
Explanation:
jdjdjdjdjfjofkd ruudoeksowkosksd and nkdeondjvndkxnfuvjfk
If a lawn mower is pushed with a distance of 30 meters and 12N-m of work is exerted, calculate the force.
Answer:
Explanation:
W = FΔx so filling in:
12 = F(30) so
F = .4N
Answer the question based on this waveform.
A wave has a velocity of 24 m/s and a period of 3.0 s.
Choose the correct amplitude.
1/2 m
1/72 m
3 m
Cannot be determined from the given information
Answer:
Cannot be determined from the given information
Explanation:
Given the following data;
Velocity = 24 m/s
Period = 3 seconds
To find the amplitude of the wave;
Mathematically, the amplitude of a wave is given by the formula;
x = Asin(ωt + ϕ)
Where;
x is displacement of the wave measured in meters.
A is the amplitude.
ω is the angular frequency measured in rad/s.
t is the time period measured in seconds.
ϕ is the phase angle.
Hence, the information provided in this exercise isn't sufficient to find the amplitude of the waveform.
However, the given parameters can be used to calculate the frequency and wavelength of the wave.
A 0.080-kg egg test dummy is fitted with a helmet and attached to a swing. This egg test dummy is pulled back and released, allowing it to collide with a cement block. The impulse on the egg test dummy is - 0.39N.s is over an interval of 0.050 s. What is the magnitude of the force on the egg test dummy during this time interval?
Answer:
7.8 N
Explanation:
Applying,
I = Ft................. Eqaution 1
Where I = Impulse on the egg test dummy, F = Force on the egg test dummy during the time interval, t = time interval
make F the subject of the equation
F = I/t.................. Equation 2
From the question,
Given: T = -0.39 N.s, t = 0.050 s
Substitute these vales into equation 2
F = -0.39/0.050
F = -7.8 N
Hence the force that act on the egg test dummy is 7.8 N
Impulse can be defined as
The frequency at which something occurs
The change in velocity
The change in momentum from an force within the system
The change in momentum from a force outside of the system
Explanation:
The change in momentum from an force within the system.
If Cl− is the only anion in the solution, what is the Cl− concentration in milliequivalents per liter?
Answer:
155mEq/L Cl-
Explanation:
A Ringer’s solution contains the following concentrations of cations: 146 mEq/L of Na+, 5 mEq/L of K+, and 4 mEq/L of Ca2+.
As Cl- is the only counterion of those cations:
For Na, the molecule is NaCl and the mEq/L of Cl- = mEq of Na+. The Cl- of the first ion is 146mEq/L Cl-
For K+, The molecule is KCl, mEq Cl- = 5mEq/L Cl-
And, for Ca2+, The molecule is CaCl2 but the equivalents of Ca2+ = Equivalents of Cl- = 4mEq/L Cl-
The total concentration of Cl- are:
146 + 5 + 4 =
155mEq/L Cl-Can the magnitude of a vector ever (a) be equal to one of its components, or (b) be less than one of its components? 9. Can a particle with constant speed be accelerating? What if it has constant velocity?
Answer:
a) the other components are zero, in the direction of one of the coordinate axes
b) the magnitude is less than the value of one of its components, it must occur when the vector is in some arbitrary direction
9) constant velocity the acceleration must necessarily be zero,
constant speed can be accelerated since it may be changing the direction of the velocity vector
Explanation:
Vectors are quantities that have modulo (scalar) direction and sense.
a) If in a vector its magnitude is equal to one d its components implies that the other components are zero, therefore the vector must be in the direction of one of the coordinate axes
b) if the magnitude is less than the value of one of its components, it must occur when the vector is in some arbitrary direction, other than the direction of the axes, that is
R² = x² + y²
where R is the magnitude of the vector e x, and are the components
9) When a particle has a constant velocity, the acceleration must necessarily be zero,
v = vo + a t
The bold letters indicate vectors If a = 0 implies that v = vo
If a particle has constant speed it can be accelerated since it may be changing the direction of the velocity vector, this type of acceleration has the name of centripetal acceleration
The answer is D. I can't figure out why? The human range is from 20 Hz to 20 kHz...
Answer:
(C) 2 kHz
Explanation:
The normal hearing frequency range of a person has a minimum of about 20 Hz, which is the about the frequency of the lowest pipe organ pipe. The maximum frequency that a human can ear comfortably is 20 kHz
Therefore, the student will not be able to hear sounds less than 20 Hz, and sounds above 20 kHz and the student will only be able to hear the 2 kHz sound.
research paper on tsunamis (4-5 paragraphs minimum) 3) Tsunamis how they work….evacuation routes, structures built in oceans to protect, early detection, etc
Expectations:
A. Must be at least 4 full paragraphs. (probably will need to be more)
B. Must have an introductory paragraph that explains what the problem is, and the general overview of the paper.
C. Must Define Problem, including details and how it relates to Irvine
D. Main Body of Paper (probably couple of paragraphs) This is where you will show what you found out in your research. Make sure to include things like current use/techniques, as well as what technological advancements are being researched to improve your specific topic/issue.
E. Conclusion: Short summary of main points. Your Opinion on what is working and why (or what is not working and why)
F. Citations: Must use at LEAST 3 sources. Must site works at end, in either MLA or APA format, AND must site them where used in the paper (also MLA or APA format).
Make sure all work is yours and original. Copying is cheating. Using information from a source without citing is plagiarism.
If we go on the top of the Mountain we will our weight increase or decrease?
Answer:
increase
Explanation:
guesshejwoowsnnsnakalalapqjhdjd
Answer:
our weight would decrease.
Explanation:
because of you burning all those calories and fat from hiking up the mountain.
Does anyone know the answer ? I forgot my calculator.
12 x sin50
12 × sin50 = 9.192533317........
Give a general description of how winds form
Answer:
Wind comes from pressure and temperature differences.
Explanation:
Have you ever opened a window on a hot day to let a breeze in? What is happening is a rush of air to balance out temperatures. This goal for uniformity is why ice melts in a glass of warm coffee and air rushes out of a balloon.
Answer:
Wind forms when the sun heats one part of the atmosphere differently than another part. This causes expansion of warmer air, making less pressure where it is warm than where it is cooler. Air always moves from high pressure to lower pressure, and this movement of air is wind.
Explanation:
Raquel establece que la rapidez del sonido en el aire en un día es de 346 m/s . Días después hace la misma medición obteniendo una rapidez de 340 m/ s . ¿Cuál será la temperatura del aire en cada día?
Answer:
La ecuación para la velodiad del sonido en aire esta dada por:
[tex]v = \sqrt{ \frac{\gamma*R*T}{M} }[/tex]
Resolviendo esto para T, obtenemos:
[tex]T = v^2*(\frac{M}{\gamma*R} )[/tex]
donde:
T = temperatura del aire en grados Kelvin
γ = constante adiabatica = 1.4
R = constante del gas ideal =
M = masa molar del aire = 29*10^(-3) kg/mol
Si sabemos que el primer día la velocidad es 346 m/s, tenemos:
v = 346 m/s
Ahora podemos reemplazar todos esos valores en la ecuación para T, y asi obtener:
[tex]T = (346m/s)^2*(\frac{29*10^{-3}kg/mol}{1.4* 8.31 J/mol*K} ) = 298.42 K[/tex]
Para el segundo día la velocidad es 340 m/s, entonces ese día la temperatura va a ser:
[tex]T = (340m/s)^2*(\frac{29*10^{-3}kg/mol}{1.4* 8.31 J/mol*K} ) = 288.16 K[/tex]
The acidity model given by pH = -log10[H+] where acidity (pH) is a measure of the hydrogen ion concentration [H+] (measured in moles of hydrogen per liter) of a solution. Using this model, determine the pH of a solution with a hydrogen ion concentration of 2.3 X 10^-5 (round your answer to the nearest hundredth)
Answer:
Hydrogen ion concentration, [H+] :
[tex]{ \bf{[H {}^{ + } ] = 2.3 \times {10}^{ - 5} \: mol \: l {}^{ - 1} }}[/tex]
Substitute to the negative logarithmic model:
[tex] = { \tt{ - log(2.3 \times {10}^{ - 5} ) }} \\ pH = 4.64[/tex]
