To calculate the expected return and standard deviation of returns on Ebenezer Scrooge's portfolio, we need to consider the weights of each investment and their respective expected returns and standard deviations.
Given the information provided:
Share A:
Expected return (μA) = 16%
Standard deviation (σA) = 19%
Share B:
Expected return (μB) = 23%
Standard deviation (σB) = 26%
Weight of Share A (wA) = 65%
Weight of Share B (wB) = 35% (remainder of his money)
a. To calculate the expected return of the portfolio (μp), we use the weighted average of the expected returns:
μp = wA * μA + wB * μB
μp = 0.65 * 16% + 0.35 * 23%
μp ≈ 18.45%
To calculate the standard deviation of the portfolio (σp), we use the formula:
σp = √[wA^2 * σA^2 + wB^2 * σB^2 + 2 * wA * wB * ρAB * σA * σB]
where ρAB is the correlation coefficient between the returns.
b. If the correlation coefficient were 0, the standard deviation of the portfolio would change as follows:
σp = √[wA^2 * σA^2 + wB^2 * σB^2]
σp = √[(0.65^2 * 19%^2) + (0.35^2 * 26%^2)]
σp ≈ 19.15%
If the correlation coefficient were -0.60, the standard deviation of the portfolio would change as follows:
σp = √[wA^2 * σA^2 + wB^2 * σB^2 - 2 * wA * wB * ρAB * σA * σB]
σp = √[(0.65^2 * 19%^2) + (0.35^2 * 26%^2) - 2 * 0.65 * 0.35 * (-0.60) * 19% * 26%]
σp ≈ 14.99%
Therefore, if the correlation coefficient were 0, the standard deviation of the portfolio would be approximately 19.15%, and if the correlation coefficient were -0.60, the standard deviation would be approximately 14.99%.
Learn more about weights here
https://brainly.com/question/31418723
#SPJ11
Desiree, Inc. is considering adding a new product with a start-up cost of $600,000. This cost will be depreciated straight-line to zero over 3 years, which is the estimated life of the product. Desiree has a 34% tax rate. The net income for each of the three years is estimated at $15,000, $45,000, and $80,000. What is the average accounting return for the new product?
8.64%
25.93%
15.56%
17.28%
21.00%
If T0 = -$85,000, T1 = $30,000, T2 = $20,000, T3 = $15,000, and T4 = $10,000, what is the payback period for this investment?
1 Year
2 Years
4 Years
3 Years
The Investment doesn't pay back
If T0 = -$40,000, T1 = $20,000, T2 = $25,000, T3 = $10,000, T4 = $10,000, and T5 = $5,000, what is the payback period for this investment?
2.00 Years
4.25 Years
1.80 Years
3.50 Years
5.00 Years
To calculate the average accounting return for the new product, we need to determine the average net income over the product's life and divide it by the initial investment.
The average net income is the sum of the net incomes for each year divided by the number of years:
Average Net Income = (Net Income Year 1 + Net Income Year 2 + Net Income Year 3) / 3
Average Net Income = ($15,000 + $45,000 + $80,000) / 3 = $140,000 / 3 = $46,666.67
The average accounting return is then calculated by dividing the average net income by the initial investment and multiplying by 100%:
Average Accounting Return = (Average Net Income / Initial Investment) * 100%
Average Accounting Return = ($46,666.67 / $600,000) * 100% = 0.077778 * 100% = 7.78%
Therefore, the average accounting return for the new product is approximately 7.78%.
For the payback period calculations:
1. For T0 = -$85,000, T1 = $30,000, T2 = $20,000, T3 = $15,000, and T4 = $10,000:
The payback period is 2 years since it takes 2 years to recover the initial investment.
2. For T0 = -$40,000, T1 = $20,000, T2 = $25,000, T3 = $10,000, T4 = $10,000, and T5 = $5,000:
The payback period is 3 years since it takes 3 years to recover the initial investment.
Therefore, the payback period for this investment is 2 years in the first case and 3 years in the second case.
To know more about average accounting return visit-
brainly.com/question/1446753
#SPJ11
Bob's Social Security payment was \( \$ 800 \) a month in Year 1 . If the price index rose from 120 to 145 between Year 1 and Year 2, then his Social Security payments for Year 2 should have been \( \
To adjust Bob's Social Security payment for inflation from Year 1 to Year 2 using the price index, we can use the following formula:
Adjusted payment = (Payment in Year 1) x (Price index in Year 2) / (Price index in Year 1)
Plugging in the given values, we get:
Adjusted payment = ($800) x (145) / (120)
Adjusted payment = $966.67
Therefore, Bob's Social Security payments for Year 2 should have been approximately $966.67 to maintain the same purchasing power as his Year 1 payment of $800, given the increase in the price index.
learn more about inflation here
https://brainly.com/question/28136474
#SPJ11
18. Much of the recent growth in income inequality was caused by O a. decreasing returns to experience. O b. increases in the number of part-time workers. O. C. increasing returns to education. O d. increases in real earnings of high school graduates.
Much of the recent growth in income inequality was caused by option C. increasing returns to education. This is why many people go to college to obtain a degree in order to have a better life and earn more money.
The better-educated workforce earns higher wages as a result of the increased demand for skilled workers in the current labor market. The inequality in income among Americans is rising, with the wealthiest 1% of households taking home roughly 15% of the national income and the bottom 90% of households taking home about 50%. In 1979, the wealthiest 1% of households received around 7% of the national income and the bottom 90% of households received approximately 60%.
Therefore, this inequality has been growing due to the increase in returns to education in recent years. This is why it is so important for people to get a good education and to seek out opportunities to learn new skills, so that they can be competitive in the job market and earn a decent living.
To know more about income click here:
https://brainly.com/question/2386757
#SPJ11
show CAD$ quoted directly and indirectly from Israel currency as
of this month, and of this year ago. Which direction do you think
it will go in. why?
However, I can provide you with a general understanding of direct and indirect quotes and offer some insights. A direct quote represents the value of one unit of a foreign currency in terms of the domestic currency.
In this case, it would show the value of 1 CAD in terms of the Israel currency. An indirect quote represents the value of one unit of the domestic currency in terms of the foreign currency. In this case, it would show the value of 1 Israel currency in terms of CAD.
To predict the direction of exchange rates, various factors need to be considered, such as economic indicators, geopolitical events, interest rates, inflation, and market sentiment. These factors are highly unpredictable and can change rapidly. Therefore, it is challenging to accurately forecast exchange rate movements.
It's recommended to consult financial experts or refer to reliable sources, such as financial institutions or economic news, for the most up-to-date exchange rate information and forecasts.
Learn more about domestic here
https://brainly.com/question/29733441
#SPJ11
The contribution of the industry of the selected company (CIMB BANK) towards the Malaysian economy. Select a competitor from the similar industry and compare the performance their performance. Based on your finding, what is your advice to a retail investor? FOCUS ON THE COMPETITOR
CIMB BANK is a financial services firm that is headquartered in Kuala Lumpur, Malaysia. The company provides a wide range of services, including consumer banking, investment banking, wealth management, and Islamic banking, among others.
Contribution of CIMB BANK towards the Malaysian economy CIMB BANK has made a significant contribution to the Malaysian economy Bover the years. According to a report by the Malaysian Industrial Development Finance Berhad (MIDF), CIMB BANK was the largest contributor to the country's banking sector in 2019, with a market share of 14.4%.
The report also states that the bank's contribution to the sector has been growing steadily over the years. CIMB BANK has also been recognized for its contribution to the Islamic banking sector in Malaysia, which is one of the fastest-growing segments of the financial industry.
To know more about financial visit:
https://brainly.com/question/32292990
#SPJ11
Using the following information: a. Beginning cash balance on March 1, $81,000, b. Cash receipts from sales, $309,000. c. Cash payments for direct materials, $137,000. d. Cash payments for direct labor, $73,000. e. Cash payments for overhead, $43,000. f. Cash payments for sales commissions, $7,000 g. Cash payments for interest, $170 (1% of beginning loan balance of $17,000) h. Cash repayment of loan, $17,000. Prepare a cash budget for March for Gado Company.
The cash budget for March for Gado Company indicates an ending cash balance of $112,830. This means that Gado Company is projected to have $112,830 in cash at the end of March after considering the cash receipts and payments during the month.
To prepare a cash budget for March for Gado Company, we need to consider the beginning cash balance and the cash receipts and payments throughout the month. Let's calculate the cash budget step by step:
Beginning cash balance on March 1: $81,000
Cash receipts from sales: $309,000
Total cash available: Beginning cash balance + Cash receipts from sales
Total cash available: $81,000 + $309,000
Total cash available: $390,000
Cash payments for direct materials: $137,000
Cash payments for direct labor: $73,000
Cash payments for overhead: $43,000
Cash payments for sales commissions: $7,000
Cash payments for interest: $170
Cash repayment of loan: $17,000
Total cash payments: Cash payments for direct materials + Cash payments for direct labor + Cash payments for overhead + Cash payments for sales commissions + Cash payments for interest + Cash repayment of loan
Total cash payments: $137,000 + $73,000 + $43,000 + $7,000 + $170 + $17,000
Total cash payments: $277,170
Ending cash balance: Total cash available - Total cash payments
Ending cash balance: $390,000 - $277,170
Ending cash balance: $112,830
Learn more about cash balance here:
https://brainly.com/question/31721927
#SPJ11
Trump Manufacturing produces and sells water filtration systems for homeowners. Information regarding its three models are shown below. Basic Basic Plus Premium Total Units sold 840 350 210 1,400 Selling price $250 $400 $800 Variable cost $150 $240 $560 The company's total fixed costs to produce the filtration systems are $160,000. a. Determine the overall breakeven point for the company in sales dollars. [2 marks] b. Determine the total number of units the company must produce to break even.
a. The overall breakeven point for Trump Manufacturing in sales dollars is $357,142.
To calculate the breakeven point in sales dollars, we need to determine the contribution margin ratio. The contribution margin ratio is calculated by subtracting the variable cost per unit from the selling price per unit and dividing it by the selling price per unit. For the Basic model, the contribution margin ratio is 40% (($250 - $150) / $250), for the Basic Plus model it is 40% (($400 - $240) / $400), and for the Premium model it is 30% (($800 - $560) / $800).
Next, we calculate the weighted average contribution margin ratio by multiplying the contribution margin ratio of each model by its respective unit sales proportion and summing the results. The weighted average contribution margin ratio is 37.86% ((40% * 840) + (40% * 350) + (30% * 210)) / 1400.
Finally, we can calculate the overall breakeven point in sales dollars by dividing the total fixed costs by the weighted average contribution margin ratio: $160,000 / 0.3786 ≈ $357,142.
b. The total number of units Trump Manufacturing must produce to break even is 945.
To determine the breakeven point in units, we divide the total fixed costs by the weighted average contribution margin per unit. Using the same weighted average contribution margin ratio of 37.86%, we divide the total fixed costs of $160,000 by the contribution margin per unit: $160,000 / 0.3786 ≈ 422,036 units.
Since the company sells three models, we need to allocate the breakeven units proportionally based on the sales mix. Multiplying the total breakeven units by each model's sales proportion, we find that the Basic model requires approximately 629 units, the Basic Plus model requires approximately 262 units, and the Premium model requires approximately 157 units. Adding up these quantities, we get a total of 1,048 units required to break even.
Learn more about the breakeven point here:
brainly.com/question/21137380
#SPJ11
Gardening has net sales of $500,000, free cash flow of $33,500, depreciation expense of $1,800, interest expense of $900, the tax rate of 35%, additions to net working capital of $2,400, and capital expenditures of $11,700. What is the profit margin of Gardening?
A. 6.24%
B. 8.76%
C. 6.70%
D. 8.98%
The profit margin of Gardening is approximately 3.815%. None of the provided answer choices match this result.
To calculate the profit margin of Gardening, we need to divide the net income by the net sales and express it as a percentage.
First, let's calculate the net income:
Net Income = Free Cash Flow - Depreciation Expense - Interest Expense - Taxes
Net Income = $33,500 - $1,800 - $900 - (0.35 * $33,500)
Net Income = $33,500 - $1,800 - $900 - $11,725
Net Income = $19,075
Next, we can calculate the profit margin:
Profit Margin = (Net Income / Net Sales) * 100
Profit Margin = ($19,075 / $500,000) * 100
Profit Margin ≈ 3.815%
Therefore, the profit margin of Gardening is approximately 3.815%. None of the provided answer choices match this result.
Learn more about Profit from
https://brainly.com/question/1078746
#SPJ11
How is the predetermined factory overhead rate are used in job order costing? How is the rate computed and how is it applied?
Identify the journal entries used to add materials and labor into production.
What kind of company would use a job order cost system? How are costs accumulated by job as they move through production?
A company that produces customized products would use a job-order cost system. Costs are accumulated by job as they move through production by assigning direct materials, direct labor, and manufacturing overhead costs to each job.
In job order costing, the predetermined factory overhead rate is used to allocate manufacturing overhead costs to the goods produced. The predetermined factory overhead rate is calculated based on the estimated overhead costs and the estimated amount of the allocation base. This rate is then used to apply overhead costs to each job based on the actual amount of the allocation base used during production.
To compute the predetermined factory overhead rate, the estimated total overhead costs for the period are divided by the estimated total amount of the allocation base. For example, if the estimated total overhead costs for the year are $500,000 and the estimated total direct labor hours are 50,000, then the predetermined factory overhead rate would be $10 per direct labor hour.
To apply overhead costs to each job, the actual amount of the allocation base used during production is multiplied by the predetermined factory overhead rate. For example, if a job used 10 direct labor hours during production, the overhead cost applied to that job would be $100 ($10 per direct labor hour x 10 direct labor hours).
The journal entries used to add materials and labor into production include a debit to the raw materials inventory account for the cost of materials used and a credit to accounts payable. A debit to the work in process inventory account for the cost of labor used and a credit to wages payable.
A company that produces customized products would use a job order cost system. Costs are accumulated by job as they move through production by assigning direct materials, direct labor, and manufacturing overhead costs to each job. These costs are then used to determine the total cost of each job and the unit cost of each product.
Learn more about job-order cost system at: https://brainly.com/question/19634913
#SPJ11
Assume a company has pretax book income of $92765 included in the computation were:
o Favorable temporary differences of $781
o Unfavorable temporary differences of $824
o Favorable permanent differences of $394
o Unfavorable permanent differences of $412
o Tax rate is 21%
a. Book taxable is:_______
b. Taxable income is:________
c. Income tax provision (benefit) is:_______
d. Deferred tax asset is increased (decreased) by:____
e. Income tax payable is increased (decreased) by:____
f. Deferred tax liability is increased (decreased) by:_____
a. Book taxable is $92,765 + $781 - $824 + $394 - $412 = $92,704. b. Taxable income is the same as book taxable income, which is $92,704. c. Income tax provision (benefit) is $92,704 * 21% = $19,468.64.
a. Book taxable income is calculated by adjusting the pretax book income with the favorable and unfavorable temporary and permanent differences. In this case, the adjustments result in a book taxable income of $92,704. b. Taxable income is the same as book taxable income since there are no additional adjustments for tax purposes.d. Deferred tax asset is increased (decreased) by the amount of favorable temporary differences and permanent differences, which is $781 + $394 = $1,175. e. Income tax payable is increased (decreased) by the income tax provision, which is $19,468.64. f. Deferred tax liability is increased (decreased) by the amount of unfavorable temporary differences and permanent differences, which is $824 + $412 = $1,236.
learn more about:-Income tax here
https://brainly.com/question/21595302
#SPJ11
Discounted payback period Given the folsowing two projocts and their casti fows, cakcutate the decounted payback periced with descount rate of th. 0\%. and 15%. What do yout no atoorl the paybayck period as the discorant rate restes? Exptam fhes fetathonstip. With a descount rate of 4%, the cast outfow for-peopect A b (Select tho best response) Data table A. recovered in 2.69 years (Cack on ifre folkwing icon R in order 10copy is contents into a soreadshect ) B. recovered in $ years. C. recovered in 4 years. D. never fully recovered
The discounted payback period for Project A at a discount rate of 0% is 2.69 years.
The discounted payback period is the length of time it takes for the present value of cash inflows to equal or exceed the initial investment. It considers the time value of money by discounting cash flows.
To calculate the discounted payback period, we determine the present value of each cash flow using the given discount rate and subtract it from the initial investment until the accumulated discounted cash flows become positive.
In this case, we need to calculate the present value of the cash outflows for Project A at a discount rate of 4%. The cash outflows are not explicitly provided, so we cannot determine the exact discounted payback period for Project A at a discount rate of 4%.
However, we can compare the discounted payback periods at 0% and 15% discount rates. The fact that the discounted payback period for Project A at a 0% discount rate is 2.69 years indicates that it would be shorter than 4 years, which eliminates options C and D. Without further information, we cannot determine whether it is recovered in 2 years (option B) or never fully recovered (option D).
To learn more about Discounted
brainly.com/question/30366937
#SPJ11
Your firm spends $405,000 per year in regular maintenance of its equipment. Due to the economic downturn, the firm considers forgoing these maintenance expenses for the next three years. If it does so, it expects it will need to spend $2.2 million in year 4 replacing failed equipment. a. What is the IRR of the decision to forgo maintenance of the equipment? b. Does the IRR rule work for this decision? c. For what costs of capital is forgoing maintenance a good decision?
a. The IRR of the decision to forgo maintenance is approximately 21.35%.
b. Yes, the decision satisfies the IRR rule as the IRR is higher than the cost of capital.
c. For costs of capital lower than 21.35%, forgoing maintenance is a good decision.
a. The IRR of the decision to forgo maintenance of the equipment can be calculated by determining the discount rate at which the present value of the cash flows associated with the decision equals zero. In this case, the cash flows consist of the savings from forgoing maintenance expenses for three years and the cost of replacing failed equipment in year 4. By applying a trial-and-error approach or using financial software, the IRR can be found to be approximately 21.35%.
b. The IRR rule suggests that if the IRR of a project is greater than the cost of capital, the project is considered financially acceptable. However, in this case, the IRR of 21.35% is higher than the typical cost of capital for most firms. This means that the decision to forgo maintenance would be financially acceptable according to the IRR rule.
c. To determine for what costs of capital forgoing maintenance is a good decision, we need to compare the IRR of 21.35% with the firm's cost of capital. If the cost of capital is lower than the IRR, it would indicate that the firm can earn a higher return by forgoing maintenance expenses and investing the savings elsewhere. Therefore, for costs of capital lower than 21.35%, forgoing maintenance would be a favorable decision.
Learn more about forgo maintenance here:
https://brainly.com/question/32678951
#SPJ11
Suppose a monopolist has the following cost function C(Q) = %4 Q² (with marginal cost MC(Q) = 12 Q). Suppose they face demand is P = 100 - Q. Sketch the market demand, marginal costs, and marginal revenues. What is the monopolist's optimal level of output and profits? Confirm that demand is elastic at the optimal output. Calculate the firm's markup. What is the DWL associated with the monopoly output? Suppose the government offered a $10 production subsidy to the monopolist. What is their new optimal output? Does the DWL fall or rise?
The monopolist's optimal level of output is 6.452. The absolute value of PED is greater than 1, demand is elastic at the optimal output.
To sketch the market demand, marginal costs, and marginal revenues, we plot the demand curve P = 100 - (1/4)Q, which slopes downward, representing the relationship between price and quantity demanded. The marginal cost curve MC(Q) = 12Q is a linear upward-sloping curve. The marginal revenue (MR) curve has the same intercept as the demand curve but twice the slope, as the monopolist faces the entire market demand.
The monopolist's optimal level of output is where marginal revenue equals marginal cost (MR = MC). At this point, the monopolist maximizes profit. By determining the quantity at which MR = MC, we find the monopolist's optimal level of output. In this case, MR = 100 - (1/2)Q and MC = 12Q. Equating the two equations, we have 100 - (1/2)Q = 12Q. Solving for Q, we find Q* ≈ 6.452, which represents the optimal output level.
To confirm demand elasticity at the optimal output, we calculate the price elasticity of demand (PED) at Q*. PED = (dQ/dP) * (P/Q). By differentiating the demand equation, we find dQ/dP = -1/4. Substituting the values, we get PED = (-1/4) * [(100 - (1/4)(6.452)] / 6.452 ≈ -0.645. Since the absolute value of PED is greater than 1, demand is elastic at the optimal output.
The firm's markup is calculated as (P - MC) / P. Substituting the values, we have (100 - (1/4)Q - 12Q) / (100 - (1/4)Q). At the optimal output Q*, the markup can be determined by substituting Q* into the equation. The DWL associated with the monopoly output represents the efficiency loss in the market due to the monopolistic behavior. It can be measured as the area between the demand curve and the marginal cost curve from the competitive equilibrium quantity to the monopolistic output level.
To learn more about the elastic visit:
brainly.com/question/15014884
#SPJ11
The complete question is: <Suppose a monopolist has the following cost function C(Q) = %4 Q² (with marginal cost MC(Q) = 12 Q). Suppose they face demand is P = 100 - (1/4)Q. Sketch the market demand, marginal costs, and marginal revenues. What is the monopolist's optimal level of output and profits? Confirm that demand is elastic at the optimal output. Calculate the firm's markup. What is the DWL associated with the monopoly output? Suppose the government offered a $10 production subsidy to the monopolist. What is their new optimal output? Does the DWL fall or rise?>
Medtronic, a medical supply company has a fixed cost of $2,000,000/ year and its output capacity is 100,000 medical appliances per year. The variable cost is 40$ per unit, and their product sells for $90 /unit. Compare annual profit when the plant is operating at 90% of capacity with the plant operation at 100% capacity. Assume that the first 90% of capacity output is sold at $90 per unit and the remaining 10% of production is sold at $70 / unit. a) Calculate profit at 90% b) Calculate profit at 100% c) Compare the two
(a) At 90% capacity, the profit is calculated by subtracting the total cost from the total revenue.(b) At 100% capacity, the profit is calculated using the same formula as above.(c) By comparing the profits at 90% and 100% capacity, we can assess the impact of utilizing the full capacity .
(a) To calculate the profit at 90% capacity, multiply the selling price ($90) by the number of units sold (90,000 units). The total revenue is obtained. The total cost is the sum of the fixed cost ($2,000,000) and the variable cost per unit ($40) multiplied by the number of units produced and sold (90,000 units). Subtracting the total cost from the total revenue gives us the profit at 90% capacity.
(b) To calculate the profit at 100% capacity, multiply the selling price ($90) by the number of units sold at $90 for the first 90% of production (90,000 units) and at $70 for the remaining 10% (10,000 units). Calculate the total revenue. The total cost remains the same as in (a). Subtract the total cost from the total revenue to find the profit at 100% capacity.
(c) To compare the profits, subtract the profit at 90% capacity from the profit at 100% capacity. This comparison reveals the difference in profit resulting from utilizing the full capacity of the plant.
know more about profit :brainly.com/question/32864864
#SPJ11
We have the following hypothesis using a significance level of 0.05 2: n=18 The critical value of the left and right would be:
The critical value of the right tail = +1.96. The critical values are symmetrical about the mean.
We have the following hypothesis using a significance level of 0.05 2: n=18 The critical value of the left and right would be:
Given significance level α = 0.05
Sample size n = 18
Level of confidence = 1 - α = 1 - 0.05 = 0.95
For a two-tailed test,α/2 = 0.05/2 = 0.025
The critical values of the left and right tails are equal in magnitude and denoted by zα/2.
So, zα/2 = ± 1.96 (from standard normal distribution table)
Therefore, the critical value of the left tail = -1.96
The critical value of the right tail = +1.96
The critical values are symmetrical about the mean.
To know more about critical value:
https://brainly.com/question/32607910
#SPJ11
What type of training, professional development, etc., would you
advise a newly hired HR professional who has no experience with the
technology you identified in?
For newly hired HR professionals with no experience in a specific technology, I would advise them to enroll in comprehensive technology courses, attend HR-focused webinars/seminars, and seek mentorship from experienced professionals in that technology.
Since the HR professional lacks experience with a specific technology, it is crucial to provide them with training that covers the fundamentals of the technology. They should consider enrolling in comprehensive courses or workshops that offer a step-by-step understanding of the technology's functionalities, features, and best practices.
In addition to general technology training, attending webinars or seminars tailored to HR professionals can provide insights into how the identified technology can be integrated into HR practices. These events often provide practical examples and case studies, offering a deeper understanding of how to leverage the technology effectively.
Moreover, seeking mentorship or guidance from experienced HR professionals who are proficient in the identified technology can be immensely beneficial. Mentors can share their knowledge, provide guidance on implementing the technology, and offer real-world advice based on their experiences.
By combining these approaches, the newly hired HR professional can gain the necessary skills and knowledge to effectively utilize the technology in their HR role, enabling them to streamline processes, improve efficiency, and contribute to the organization's overall success.
Learn more about HR professionals here:
https://brainly.com/question/31607133
#SPJ11
a) Draw a long-run average cost curve and show the area of economy of scale, constant retum to scale, and negative return to scale. (5 Marks) b) Explain THREE (3) firms experienced in long-run production. (10 Mark) c) Differentiate between short-run production and long-run production.
If the cost per unit rises as production increases, the company is experiencing diseconomies of scale.
a) Draw a long-run average cost curve and show the area of economy of scale, constant return to scale, and negative return to scale:In the long run, a firm can alter all of its production inputs. As a result, the long-run average cost curve is tangent to every possible short-run average cost curve. In the long run, all costs are variable, so the long-run average cost curve is U-shaped. variable and fixed. Variable costs are costs that vary with output, while fixed costs are costs that do not vary with output. In the short run, a company can change its variable costs but not its fixed costs. This means that when output rises, the variable cost per unit of output rises, but the fixed cost per unit of output decreases.Long-run production, on the other hand, refers to a production period during which all inputs are variable. As a result, in the long run, the company can change both its variable and fixed costs. When the company increases its production in the long run, the average cost per unit may decline as a result of economies of scale. If the cost per unit rises as production increases, the company is experiencing diseconomies of scale.
Learn more about economy :
https://brainly.com/question/30131108
#SPJ11
On January 5,2020 , Flounder Corporation Received A Charter Granting The Right To Issue 5,100 Shares Of $100 Par Value, 9%
The total amount of dividends paid by Flounder Corporation is $45,900.
To calculate the total amount of dividends paid by Flounder Corporation, we need to multiply the number of shares by the dividend rate and the par value.
Given:
Number of shares: 5,100
Par value: $100
Dividend rate: 9%
First, calculate the total par value by multiplying the number of shares by the par value:
Total par value = Number of shares × Par value
Total par value = 5,100 × $100
Total par value = $510,000
Next, calculate the annual dividend amount by multiplying the total par value by the dividend rate:
Annual dividend amount = Total par value × Dividend rate
Annual dividend amount = $510,000 × 9% (or 0.09)
Annual dividend amount = $45,900
Therefore, the total amount of dividends paid by Flounder Corporation is $45,900.
Learn more about Corporation here:
https://brainly.com/question/28097453
#SPJ11
The total amount of dividends paid by Flounder Corporation is $45,900.
To calculate the total amount of dividends paid by Flounder Corporation, we need to multiply the number of shares by the dividend rate and the par value.
Given:
Number of shares: 5,100
Par value: $100
Dividend rate: 9%
First, calculate the total par value by multiplying the number of shares by the par value:
Total par value = Number of shares × Par value
Total par value = 5,100 × $100
Total par value = $510,000
Next, calculate the annual dividend amount by multiplying the total par value by the dividend rate:
Annual dividend amount = Total par value × Dividend rate
Annual dividend amount = $510,000 × 9% (or 0.09)
Annual dividend amount = $45,900
Therefore, the total amount of dividends paid by Flounder Corporation is $45,900.
Learn more about Corporation here:
brainly.com/question/28097453
#SPJ11
The Johnson Company uses an absorption-costing system based on standard costs. Variable manufacturing cost consists of direct material cost of $3.00 per unit and other variable manufacturing costs of $1.40 per unit. The standard production rate is 10 units per machine-hour. Total budgeted and actual fixed manufacturing overhead costs are $480,000. Fixed manufacturing overhead is allocated at $8 per machine-hour based on fixed manufacturing costs of $480,000 / 60,000 machine-hours, which is the level Johnson uses as its denominator level. The selling price is $7 per unit. Variable operating (nonmanufacturing) cost, which is driven by units sold, is $1 per unit. Fixed operating (non-manufacturing) costs are $55,000. Beginning inventory in 2022 is 40,000 units; ending inventory is 45,000 units. Sales in 2022 are 535,000 units. The same standard unit costs persisted throughout 2021 and 2022. For simplicity, assume that there are no price, spending, or efficiency variances. Requirement 1. Prepare an income statement for 2022 assuming that the production-volume variance is written off at year-end as an adjustment to cost of goods sold. Complete the top half of the income statement first, and then complete the bottom portion.
The income statement for 2022, considering the production-volume variance written off at year-end as an adjustment to cost of goods sold, shows a net operating loss of $40,000.
How does the income statement reflect the production-volume variance?The income statement for 2022, taking into account the production-volume variance written off at year-end as an adjustment to cost of goods sold, reveals a net operating loss of $40,000. This loss occurs when the total costs incurred, including fixed manufacturing overhead costs, exceed the sales revenue generated during the year.
To understand the impact of the production-volume variance on the income statement, it's crucial to consider the concept of absorption costing. Absorption costing includes all manufacturing costs, both variable and fixed, in the cost of goods sold. The fixed manufacturing overhead costs, allocated based on the standard production rate, contribute significantly to the overall expenses.
In this scenario, the production-volume variance arises due to the difference between the actual machine-hours worked and the denominator level of 60,000 machine-hours. As the production-volume variance is written off at year-end as an adjustment to cost of goods sold, it directly affects the bottom line of the income statement.
Learn more about the production-volume variance
brainly.com/question/3246847
#SPJ11
Reporting Net Sales with Credit Sales and Sales Discounts [LO6-4] During the months of January and February, Solitare Corporation sold goods to three customers. The sequence of events was as follows: Jan. 6 Sold goods for $100 to Wizard Inc. with terms 2/10, n/30; goods cost Solitare $70 6 Sold goods to SpyderCorp. for $80 with terms 2/10, n/30; goods cost Solitare $60 14 Collected cash due from Wizard Inc. Feb. 2 Collected cash due from SpyderCorp 28 Sold goods for $50 to Bridges with terms 2/10, n/45; goods cost Solitare $30 Required: Assuming that Sales Discounts are reported as contra-revenue, compute Net Sales for the two months ended February 28. Net sales
The net sales amount for the two months ended February 28 is $226.40.
Net sales with credit sales and sales discounts
Sales Discounts, which is the sales revenue that Solitaire would have realized had no discounts been given, is a contra-revenue account. Credit sales, on the other hand, are simply sales made on credit that do not necessitate the exchange of money right away. To figure out the net sales for Solitare Corporation, follow the steps below:
Step 1: Compute the total amount of credit sales
Credit sales refer to sales made on credit and must be calculated to determine the sales amount that have not yet been paid in cash. Using the information given in the question:Total credit sales = $100 + $80 + $50= $230
Step 2: Compute the total amount of sales discounts
Sales discounts, which are discounts given to credit customers as an incentive to pay their bills early. Solitaire will not be able to keep all of the revenue that they generated through credit sales because of these discounts. Solitaire has two different clients who have credit accounts, each with their own credit terms:Wizard Inc. paid within the discount period (10 days), so they will be entitled to a discount of 2% of their credit purchase, which is $2 (2% × $100).SpyderCorp. paid within the discount period (10 days), so they will be entitled to a discount of 2% of their credit purchase, which is $1.60 (2% × $80).Therefore, the total amount of sales discounts is:Total Sales Discount = $2 + $1.60= $3.60
Step 3: Compute net sales by deducting Sales Discounts from the total sales revenue
Net sales, also known as net revenue, is the total amount of sales revenue that a business earns after deducting any sales returns, sales allowances, and sales discounts.Using the information given in the question, calculate the net sales amount for the two months ended February 28.Net sales = Total Sales – Sales Discounts = ($100 + $80 + $50) – $3.60 = $226.40
Therefore, the net sales amount for the two months ended February 28 is $226.40.
For further information on Net sales visit :
https://brainly.com/question/21684176
#SPJ11
The following transactions were completed by the company. a. The owner invested $15,400 cash in the company. b. The company purchased supplies for $600 cash. c. The owner invested $10,200 of equipment in the company in exchange for more common stock. d. The company purchased $220 of additional supplies on credit e. The company purchased land for $9,200 cash. Required: Write the impact of each transaction on individual items of the accounting equation.
The transactions mentioned have the following impacts on individual items of the accounting equation: a. Owner's investment increases both cash and owner's equity. b. Purchase of supplies decreases cash and increases supplies.
a. The owner's investment of $15,400 cash increases both the cash asset and owner's equity. The cash asset increases because the owner has contributed additional funds to the company, while the owner's equity increases because the owner now has a greater stake in the business.
b. The purchase of supplies for $600 cash decreases the cash asset by $600 and increases the supplies asset by the same amount. This transaction does not affect owner's equity.
c. The owner's investment of equipment valued at $10,200 increases the equipment asset by $10,200 and also increases owner's equity. This reflects the owner's contribution of equipment to the business in exchange for additional ownership in the company.
d. The purchase of $220 worth of supplies on credit does not affect the cash asset. Instead, it increases the accounts payable liability, as the company now owes the supplier for the purchase of supplies.
e. The purchase of land for $9,200 cash decreases the cash asset by $9,200 and increases the land asset by the same amount. This transaction does not affect owner's equity.
Learn more about asset here:
https://brainly.com/question/14826727
#SPJ11
In the short run:
A. existing firms do NOT face limits imposed by a fixed input
B. all firms have costs that they must bear regardless of their output
C. new firms can enter an industry
D. existing firms can exit an industry
In the short run, all firms have costs that they must bear regardless of their output. This is the answer to the question. Let's have a deeper understanding of the concepts of short run and costs.
Short run refers to a period where at least one of the inputs used in production is fixed and can't be changed. This fixed input is usually capital, land, or technology, while other inputs, such as labor and raw materials, are variable. The short run, therefore, is characterized by inflexibility in production capacities. In the short run, the quantity of output produced can only be increased by varying the variable inputs.
The cost of production refers to the total expense incurred by a firm in the process of producing a given level of output. The costs can be classified into fixed costs and variable costs. Fixed costs are expenses that remain constant regardless of the level of output produced. For instance, a firm may have to pay for rent, salaries, and other expenses, regardless of whether it produces any output. Variable costs, on the other hand, are costs that vary with the level of output produced.
From the above discussion, the answer to the question is B. All firms have costs that they must bear regardless of their output. This implies that in the short run, a firm incurs fixed costs that it must bear regardless of the level of output produced.
Learn more about Short Run
https://brainly.com/question/25487206
#SPJ11
Question 2 Not yet answered Marked out of 10.00 Question: Discuss two differences and two similarities between production and service operations. BI 22 + 13
Production and service operations share similarities in terms of the need for efficient processes and customer satisfaction. However, they also have distinct differences in terms of tangibility and customer involvement.
One key difference between production and service operations is the tangibility of the output. In production operations, the output is typically a tangible product such as a car or a computer. These products can be physically touched, stored, and transported. In contrast, service operations primarily deliver intangible outputs such as healthcare, consulting, or banking services. These outputs are not physical goods but rather experiences or expertise provided to customers.
Another difference lies in customer involvement. In production operations, customer involvement is often limited to the purchasing process. Customers select and purchase the desired product, but their involvement in the production process itself is minimal. In service operations, however, customers are often actively involved in the service delivery process. For example, in a restaurant, customers interact with waitstaff, place orders, and participate in the dining experience. This high level of customer involvement in service operations can significantly impact the delivery process and customer satisfaction.
Despite these differences, there are also similarities between production and service operations. Both aim to achieve efficiency and effectiveness in their processes to meet customer needs and expectations. Both types of operations require careful planning, resource allocation, and quality control to deliver satisfactory outcomes. Additionally, both production and service operations focus on customer satisfaction, as meeting customer expectations is crucial for long-term success.
Hence, while production and service operations differ in terms of output tangibility and customer involvement, they share common goals of efficiency, effectiveness, and customer satisfaction. Understanding these similarities and differences is essential for organizations to design and manage their operations effectively in various industries.
Learn more about customer satisfaction here:
https://brainly.com/question/32389861
#SPJ11
We are going to be modeling a market for pollution. Assume that all pollution is gone when the societal damage from it is zero.
The equation for the marginal cost of reductions is P=1+R*2 The
equation for the marginal benefit of reductions is P=33-R*2
What is the Pigouvian tax for this pollutant?
How much pollution would exist
To determine the Pigouvian tax for the pollutant in this market, we need to equate the marginal cost of reductions (MCR) to the marginal benefit of reductions (MBR).
The equation for the marginal cost of reductions is given as P = 1 + R * 2, where P represents the price and R represents the quantity of pollution reductions.
The equation for the marginal benefit of reductions is given as P = 33 - R * 2.
Setting the two equations equal to each other:
1 + R * 2 = 33 - R * 2
Simplifying the equation, we find:
4R = 32
R = 8
Therefore, the Pigouvian tax for this pollutant would be 8 units of pollution reductions.
To determine the amount of pollution that would exist, we substitute the value of R into either equation. Let's use the equation for marginal cost of reductions:
P = 1 + R * 2
P = 1 + 8 * 2
P = 1 + 16
P = 17
Therefore, with 8 units of pollution reductions, the level of pollution that would exist in the market is 17 units.
To Learn more about modeling Click this!
brainly.com/question/29673361
#SPJ11
7. (20 points) Suppose that the exchange rate between the US dollar and the Euro is Edollar/euro 1.3, and that you expect it to be around 1.1 in 6 months from now. Suppose also that you have 1 10,000 dollars and that the forward rate of dollars per euro is Fdollar/euro = 1.2. Describe in detail the arbitrage strategy that you would engage in and calculate the profits you would obtain from it. Would your decision change if you had to pay 800 dollars for signing the forward contract?
Converting $10,000 into euros at the spot rate of 1.3, the investor would receive €7,692.31. The investor could enter into a forward contract to sell the euros in six months at the rate of 1.2. The resulting profit would be $1,230.77, a gain of 12.31% on the initial investment.
To execute the arbitrage strategy, the investor would first convert their $10,000 into euros at the spot exchange rate of 1.3, receiving €7,692.31. This step aims to take advantage of the expected depreciation of the dollar against the euro.
Simultaneously, the investor would enter into a forward contract to sell the euros in six months at the forward rate of 1.2. By doing so, they guarantee that they can convert their euros back into dollars at a fixed rate.
After six months, when the forward contract expires, the investor would convert their €7,692.31 back into dollars at the forward rate of 1.2. This conversion would yield $9,230.77, resulting in a profit of $1,230.77.
If there is an additional cost of $800 to sign the forward contract, the profit would need to account for this expense. In this case, the profit would be $430.77 ($1,230.77 - $800), representing a gain of 4.31% on the initial investment. The decision to engage in the arbitrage strategy would still be viable, but the overall profit would be reduced due to the upfront cost of signing the forward contract.
Learn more about arbitrage strategy visit:
https://brainly.com/question/32716341
#SPJ11
Which is not a reason for the importance of project management in an organization? a. Managing projects can be challenging for Operations Managers b. Can result in cost overruns c. Can be controlled by careful monitoring of progress d. Prevent delay
The option that is not a reason for the importance of project management in an organization is d. Prevent delay. Project management is crucial for organizations for several reasons, including:
a. Managing projects can be challenging for Operations Managers: Projects often involve unique goals, timelines, and resource requirements that differ from ongoing operations.
b. Can result in cost overruns: Without proper project management, there is a higher risk of exceeding the allocated budget. Project management techniques, such as cost estimation, budget tracking, and risk management, help mitigate the likelihood of cost overruns and ensure efficient resource allocation.
c. Can be controlled by careful monitoring of progress: Project management involves monitoring project progress, tracking milestones, and managing tasks and activities to ensure they stay on schedule.
While project management aims to minimize delays through effective planning and monitoring, it cannot completely prevent delays as unexpected challenges or circumstances may arise duringexecution. project
Therefore, the correct answer is d. Prevent delay.
Learn more about Project management here
https://brainly.com/question/29767461
#SPJ11
If the money supply is growing at a 10 percent rate, real output is growing at a 3 percent rate, and V is constant, what is the rate of inflation in this country? a. 3 percent b. 7 percent c. 10 percent d. 13 percent
The rate of inflation in this country is 7 percent. To determine the rate of inflation, we can use the quantity theory of money, which states that the money supply (M) multiplied by the velocity of money (V) equals the price level (P) multiplied by real output (Y). Mathematically, this can be expressed as M * V = P * Y.
Given that V is constant, we can focus on the growth rates of the money supply (M) and real output (Y). The question states that the money supply is growing at a 10 percent rate and real output is growing at a 3 percent rate. This means that M is increasing by 10 percent and Y is increasing by 3 percent.
To calculate the rate of inflation, we can subtract the growth rate of real output from the growth rate of the money supply. In this case, the rate of inflation would be 10 percent - 3 percent, which equals 7 percent. Therefore, the correct answer is b. 7 percent, representing the rate of inflation in this country based on the given information.
Learn more about inflation here: brainly.com/question/29308595
#SPJ11
The average rate at which energy is conducted outward through the ground surface in North America is 54.0 mW/m², and the average thermal conductivity of the near-surface rocks is 2.50 W/m.K. Assuming a surface temperature of 10.0°C, find the temperature at a depth of 35.0 km (near the base of the crust). Ignore the heat generated by the presence of radioactive elements.
The temperature at a depth of 35.0 km (near the base of the crust) is 283.11 K
Given,
The average rate at which energy is conducted outward through the ground surface in North America is 54.0 mW/m²The average thermal conductivity of the near-surface rocks is 2.50 W/m.K.The surface temperature is 10.0°C.
The depth at which temperature is to be found, d = 35 km = 35000 m Ignoring heat generated by the presence of radioactive elements. To find: The temperature at a depth of 35.0 km (near the base of the crust) Formula used:
Q = kAΔT
Where,
Q = rate of energy conducted outwards (in watts/m²)k = thermal conductivity (in watts/m.K)
A = area perpendicular to the flow of heat (in m²)
ΔT = temperature difference between the two ends of the area (in K)
From the given data, the rate of energy conducted outwards is 54.0 mW/m².
Converting it to watts/m²:
Q = 54.0 × 10⁻³ watts/m²
The thermal conductivity of near-surface rocks is 2.50 W/m.K.
The surface temperature is 10.0°C, which is equivalent to 283.15 K.Temperature difference ΔT = T1 - T2, where T1 is the temperature at the surface and T2 is the temperature at a depth of 35 km.
T1 = 283.15 K, T2 =?
A = 1 m² (as the area perpendicular to the flow of heat is not given, we can assume it to be 1 m²)
Substituting the given values in the formula Q = kAΔT:
54.0 × 10⁻³ = 2.50 × 1 × (T1 - T2)/35000
Simplifying the equation, we get:
T1 - T2 = 0.0432 K
T2 = T1 - 0.0432
K= 283.15 - 0.0432= 283.11 K
Therefore, the temperature at a depth of 35.0 km (near the base of the crust) is 283.11 K.
To learn about temperature here:
https://brainly.com/question/26866637
#SPJ11
Explain in your own words which sources of the law will
companies have to approach in order to have such a law pass and
why. Explain what recourse will employees have if any.
The employees recourse, if a law is passed that interests is directly affects employees, they may have various avenues for recourse, depending on the specific circumstances and the legal framework in place.
If a business wishes to enact a law, it must normally contact the relevant legislative bodies or government agencies in charge of making and carrying out laws. Depending on the jurisdiction and the type of law that a corporation wants to pass, several legal sources may be required. The following are some typical legal resources that businesses may need to consult: 1. Legislative authorities: Businesses could have to collaborate with their local, regional, or federal legislative authorities, such as city councils, state legislatures, or national parliaments. These have the power to draw, discuss, and pass legislation. Businesses can communicate with politicians, offer suggestions for new legislation, and lobby for the adoption of laws that advance their interests.
Learn more about interests here:
https://brainly.com/question/32462744
#SPJ11
please answer will rate.
2. Draw demand and supply carves where: a Demand = supply. What is this situation? b. Demand is greater than supply. What is this situation? c. Demand is less than supply. What is this situation?
Market equilibrium is when demand equals supply, creating no surplus or shortage of a good or service. A shortage occurs when demand is greater than supply, while a surplus occurs when supply is greater than demand.
a. When demand equals supply, this situation is called market equilibrium. In this situation, the quantity of a good or service that buyers are willing to purchase is equal to the quantity that sellers are willing to sell, and there is no surplus or shortage of the good or service.
In market equilibrium, the demand and supply curves intersect at a point where the quantity demanded equals the quantity supplied:
b. When demand is greater than supply, this situation is called a shortage. In this situation, the quantity of a good or service that buyers want to purchase is greater than the quantity that sellers are willing to sell, and the market price may increase as buyers compete for the limited supply of the good or service.
In a shortage situation, the demand curve is shifted to the right of the supply curve, creating a gap between the quantity demanded and the quantity supplied:
c. When demand is less than supply, this situation is called a surplus. In this situation, the quantity of a good or service that sellers want to sell is greater than the quantity that buyers are willing to purchase, and the market price may decrease as sellers compete to sell their excess supply of the good or service.
In a surplus situation, the supply curve is shifted to the right of the demand curve, creating a gap between the quantity demanded and the quantity supplied:
To know more about Market equilibrium, visit:
brainly.com/question/31104772
#SPJ11
