2 nitrogen atoms and five chlorine atoms what compound does that make

found a picture hope this helps

In this case, according to the given information about the oxidation numbers and the compounds given, it turns out possible to figure out the oxidation number of manganese in both MnI2, manganese (II) iodide and MnO2, manganese (IV) oxide, by using the concept of charge balance.

Thus, we can define the oxidation state of iodine and oxygen as -1 and -2, respectively, since the former needs one electron to complete the octet and the latter, two of them.

Next, we can write the following [tex]x[/tex], since manganese has five oxidation states, and it is necessary to calculate the appropriate ones:

[tex]Mn^xI_2^-\\\\Mn ^xO_2^{-2}[/tex]

Next, we multiply each anion's oxidation number by the subscript, to obtain the following:

[tex]Mn^xI_2^-\rightarrow x-2=0;x=+2\\\\Mn ^xO_2^{-2}\rightarrow x-4=0;x=+4[/tex]

Thus, the correct choice is Manganese has an oxidation number of +2 in Mnl2 and +4 in MnO2.

Learn more:

Answer:

Explanation:

The actual boiling point is probably between 34C and 40C.

Temperature measures the average kinetic energy of particles of the substances. Therefore, the correct option is option D that is the actual boiling point is probably between 34°C and 40°C.

Temperature is used to measure degree or intensity of heat of a particular substance. Temperature is measured by an instrument called thermometer.

Temperature can be measured in degree Celsius °c, Kelvin k or in Fahrenheit. Temperature is a physical quantity. Heat always flow from higher temperature source to lower temperature source.

We can convert these units of temperature into one another. The relationship between degree Celsius and Fahrenheit can be expressed as:

°C={5(°F-32)}÷9

The actual boiling point is probably between 34°C and 40°C.

Therefore, the correct option is option D.

To know more about temperature, here:

https://brainly.com/question/13694966

#SPJ2

To extract hydrogen from water, researchers insert two electrodes across the water and pass current, which can separate the hydrogen from water. The process called electrolysis of water. ... An electric field applied through the cobalt oxide to water molecules resulted in the electrolysis of water

Hydrogen gas is an environment-friendly fuel — it produces water on combustion in the presence of oxygen. ... To extract hydrogen from water, researchers insert two electrodes across the water and pass current, which can separate the hydrogen from water. The process called electrolysis of water.

This question is asking for a method for the determination of the freezing point in a solution that does not have a noticeable transition in the cooling curve, which is basically based on a linear fit method.

The first step, would be to understand that when the transition is well-defined as the one on the attached file, we can just identify the temperature by just reading the value on the graph, at the time the slope has a pronounced change. For instance, on the attached, the transition occurs after about 43 seconds and the freezing point will be about 4 °C.

However, when we cannot identify a pronounced change in the slope, it will be necessary to use a linear fit method (such as minimum squares) to figure out the equation for each segmented line having a significantly different slope and then equal them so that we can numerically solve for the intercept.

As an example, imagine two of the segmented lines have the following equations after applying the linear fit method:

[tex]y=-3.5 x + 25\\\\y=-0.52 x + 2[/tex]

First of all, we equal them to find the x-value, in this case the time at which the freezing point takes place:

[tex]-3.5 x + 25=-0.52 x + 2\\\\-3.5 x+0.52 x =2-25\\\\x=\frac{-23}{-2.98}=7.72[/tex]

Next, we plug it in in any of the trendlines to obtain the freezing point as the y-value:

[tex]y=-3.5 (7.72) + 25\\\\y = 1.84[/tex]

This means the freezing point takes place after 7.72 second of cooling and is about 1.84 °C. Now you can replicate it for any not well-defined cooling curve.

Learn more:

Answer:

this the partial removal of a substance from a solution or mixture by dissolving it in another immiscible solvent in which it is more soluble.

Answer:

Mass Number

Explanation:

In nuclear physics, the sum of the numbers of protons and neutrons present in the nucleus of an atom.

Please vote brainliest!

Answer:

The mass of objects remains constant throughout the universe. This is because an object is made of he same amount of matter (atoms), no matter where you take it in the universe. If you take an object from the Earth to the moon, only the weight will change.

Explanation:

Explanation:

Carbon dioxide and water

I hope it helps

Answer:

The usual products of combustion reactions are carbon dioxide and water.

Explanation:

Combustion reaction is when a substance reacts with oxygen gas, resulting in a release of energy in the form of light and heat. Combustion reactions must have oxygen (O2) as one of the reactants.

The genetic makeup of the majority of these organisms is either RNA or DNA. For instance, some viruses' genetic material may be RNA whereas others' genetic material may be DNA. RNA is present in the Human Immunodeficiency Virus (HIV), which after adhering to the host cell, transforms into DNA.

DNA is a collection of molecules that is in charge of transporting and passing genetic information from parents to children. A ribonucleic acid called RNA aids in the body's production of proteins. In the human body, new cells are created as a result of this nucleic acid.

Instead of thymine, uracil is present in RNA. All other bases are same as DNA like adenine, guanine and cytosine. The order of bases in RNA is:

UAACGUCG.

To know more about RNA, visit;

https://brainly.com/question/14317249

#SPJ1

Answer:

Subduction Process where the oceanic plate subducted under the continental plates because it denser than the Continental plate.

Answer:

Explanation:

First you will find the mole from the molarity and then the desired mass from the mole.

Answer:

engey

Explanation:

The solubility of nitrogen gas in water is 1.90 mL/dL at 1.00 atm and 13.3 mL/dL at 7.00 atm.

We want to relate the solubility of a gas with its partial pressure.

We can do so using Henry's law.

Henry's law states that the amount of dissolved gas in a liquid is proportional to its partial pressure above the liquid.

C = k × P

where,

The solubility of nitrogen gas is 1.90 mL/dL of blood at 1.00 atm.

Since the solvent is basically water, we can understand that the concentration of nitrogen gas is 1.90 mL/dL at 1.00 atm.

We can use this information to calculate Henry's Law constant.

k = C/P = (1.90 mL/dL)/1.00 atm = 1.90 mL/dL.atm

We want to calculate the solubility of nitrogen gas at a pressure of 7.00 atm.

We will use Henry's law.

C = k × P = (1.90 mL/dL.atm) × 7.00 atm = 13.3 mL/dL

The solubility of nitrogen gas in water is 1.90 mL/dL at 1.00 atm and 13.3 mL/dL at 7.00 atm.

Learn more about solubility here: https://brainly.com/question/11963573

Answer:,   Correct option is    0.288m/s

Explanation:    

The relationship between the velocity of the wave, its wavelength and frequency is given by the formula

Wavelengthλ=

Frequency(ν)

Speed(v)

​

,

where, v - velocity of the wave

           λ - wavelength of the wave

          f - frequency of the wave.

In the question it is given that the frequency is 4.8 Hz and the wavelength is 6.0 cm, that is, 0.06 meters.

The velocity of the sound is calculated as follows.

v=f×λ=4.8 Hz×0.06 m=0.288 m/s

Hence, the speed of the water wave is 0.288 m/s.

The mole fraction of N₂ after the mixture of 4.0 L of N₂ at 15 atm with 4.0 L of H₂ at 7.0 atm is 0.68.

We can calculate the mole fraction of N₂ with the following equation:

[tex] X_{N_{2}} = \frac{n_{N_{2}}}{n_{t}} = \frac{n_{N_{2}}}{n_{N_{2}} + n_{H_{2}}} [/tex]   (1)

The number of moles of N₂ and H₂ can be found with the ideal gas law:

[tex] PV = nRT [/tex]

Where:

P: is the pressure

R: is the gas constant

T: is the temperature

V: is the volume

For nitrogen gas we have:

[tex] n_{N_{2}} = \frac{P_{N_{2}}V_{N_{2}}}{RT} [/tex]   (2)

And for hydrogen:

[tex] n_{H_{2}} = \frac{P_{H_{2}}V_{H_{2}}}{RT} [/tex]   (3)

After entering equations (2) and (3) into (1), we get:

[tex] X_{N_{2}} = \frac{\frac{P_{N_{2}}V_{N_{2}}}{RT}}{\frac{P_{N_{2}}V_{N_{2}}}{RT} + \frac{P_{H_{2}}V_{H_{2}}}{RT}} [/tex]  

Since RT are constants, we have:

[tex] X_{N_{2}} = \frac{P_{N_{2}}V_{N_{2}}}{P_{N_{2}}V_{N_{2}} + P_{H_{2}}V_{H_{2}}} [/tex]                

We know that:

[tex] P_{N_{2}} = 15 atm[/tex]                

[tex] V_{N_{2}} = 4.0 L[/tex]                

[tex] P_{H_{2}} = 7.0 atm[/tex]                

[tex] V_{H_{2}} = 4.0 L[/tex]          

so:

[tex] X_{N_{2}} = \frac{15 atm*4.0 L}{15 atm*4.0 L + 7.0 amt*4.0 L} = 0.68 [/tex]                

Therefore, the mole fraction of N₂ is 0.68.

Find more here:

https://brainly.com/question/4147359?referrer=searchResults

I hope it helps you!

The reducing agent in the reaction 2Li(s) + Fe(CH₃COO)₂(aq) → 2LiCH₃COO(aq) + Fe(s) is lithium (Li).

The general reaction is:

2Li(s) + Fe(CH₃COO)₂(aq) → 2LiCH₃COO(aq) + Fe(s)   (1)

We can write the above reaction in two reactions, one for oxidation and the other for reduction:

Li⁰(s) → Li⁺(aq) + e⁻   (2)

Fe²⁺(aq) + 2e⁻ → Fe⁰(s)    (3)

We can see that Li⁰ is oxidizing to Li⁺ (by losing one electron) in the lithium acetate (reaction 2) and that Fe²⁺ in iron(II) acetate is reducing to Fe⁰ (by gaining two electrons) (reaction 3).  

We must remember that the reducing agent is the one that will be oxidized by reducing another element and that the oxidizing agent is the one that will be reduced by oxidizing another species.

In reaction (1), the reducing agent is Li (it is oxidizing to Li⁺), and the oxidizing agent is Fe(CH₃COO)₂ (it is reducing to Fe⁰).  

Therefore, the reducing agent in reaction (1) is lithium (Li).  

Learn more here:

I hope it helps you!

Answer:

The element X is sulfur.

Sulfur will gain 2 electrons to become an ion.

The charge of sulfide ion is (2-).

Explanation:

This problem is describing the equilibrium whereby hydrofluoric acid decomposes to hydrogen and fluorine gases at 298 K whose equilibrium constant is 8.70x10⁻³, the equilibrium concentrations of all the reactants are both 1.33x10⁻³ M and asks for the initial concentration of hydrofluoric acid which turns out to be 2.86x10⁻³ M.

Then, we can write the following equilibrium expression for hydrofluoric acid once the change, [tex]x[/tex], has taken place:

[tex][HF]=[HF]_0-2x[/tex]

Now, since both products are 1.33x10⁻³ M we infer the reaction extent is also 1.33x10⁻³ M, and thus, we can calculate the equilibrium concentration of HF via the law of mass action (equilibrium expression):

[tex]8.70x10^{-3}=\frac{(1.33x10^{-3} M)^2}{[HF]} }[/tex]

[tex][HF]=\frac{(1.33x10^{-3} M)^2}{8.70x10^{-3}} }=2.03x10^{-4}M[/tex]

Finally, the initial concentration of HF is calculated as follows:

[tex][HF]_0=[HF]+2x=2.033x10^{-4}+2*(1.33x10^{-3})=2.86x10^{-3}M[/tex]

Learn more:

The claim that the strongest intermolecular interactions between propanol molecules arises from hydrogen bonding is True.

Intermolecular forces are weaker attraction forces that are utilized to define physical characteristics of molecules such as:

Hydrogen bonding is an type of intermolecular forces.

It is a type of dipole-dipole interaction that only happens when a hydrogen atom is connected to the atomic element of oxygen, nitrogen, or fluorine.

From the question given, in the propanol (CH3CH2CH2OH) molecule, the hydrogen usually has a partially positive charge which attracts the partially negative charge of the oxygen.

Therefore, we can conclude that the claim is True.

Learn more about Hydrogen Bonding here:

https://brainly.com/question/10904296?referrer=searchResults

Work is said to be done if the force applied to a body causes the body to move through a distance.

Student B used more work and power

Workdone = Force * Distance

For student A:

Force = 3N

distance = 5meters

Time taken = 10 secs

Workdone by Student A = 3 * 5

Workdone by student A = 15Nm

Power used up = workdone/time

Power used up = 15/10

Power used up = 1.5 Watts

For student B:

Force = 6N

distance = 5meters

Time taken = 5 secs

Workdone by Student A = 6 * 5

Workdone by student A = 30Nm

Power used up = workdone/time

Power used up = 30/5

Power used up = 6 Watts

This shows that student B used more work and power

Learn more here: https://brainly.com/question/6701368

Using melting and boiling temperature, hardness and electric current passing testing.

Ionic solids are materials that have a strong bond between their ions, thus producing well-defined shapes.

In addition, due to this strong attraction, the boiling and melting temperatures of these materials are very high, in addition to the resistance to breakage presented by them.

Finally, ionic solids are also excellent conductors of electricity.

So, their properties used to determine whether or not they are ionic solids are  melting and boiling temperature, hardness and electric current passing testing.

Learn more about ionic solids: brainly.com/question/8236583

Answer:

go get the stuff.

Explanation:

This  problem provides the molar mass and radius of a metal that has an BCC unit cell and the density is required.

Firstly, we consider the formula that relates molar mass and also includes the Avogadro's number and the volume of the unit cell:

[tex]\rho =\frac{Z*M}{V*N_A}[/tex]

Whereas Z stands for the number of atoms in the unit cell, M the molar mass, V the volume and NA the Avogadro's number. Next, since BCC is able to hold 2 atoms and M and NA are given, we calculate the volume of the atom in the unit cell given the radius in meters:

[tex]V=a^3=(\frac{4R}{\sqrt{3} } )^3=(\frac{4*1.74x10^{-10}m}{\sqrt{3} } )^3=6.49x10^{-29}m^3[/tex]

And finally the required density in g/cm³:

[tex]\rho =\frac{2*341.1g/mol}{6.49x10^{-29}m^3\frac{m^3}{atom} *6.022x10^{23}\frac{atom}{mol} } =17455257.8g/m^3\\\\\rho=17.5g/cm^3[/tex]

Learn more:

Answer:

Explanation:

Thin-layer chromatography (TLC) is a chromatography technique used to separate non-volatile mixtures. ... After the sample has been applied on the plate, a solvent or solvent mixture (known as the mobile phase) is drawn up the plate via capillary action.

Answer:

›› FeBr2 molecular weight. Molar mass of FeBr2 = 215.653 g/mol. This compound is also known as Iron(II) Bromide. Convert grams FeBr2 to moles or moles FeBr2 to grams. Molecular weight calculation: 55.845 + 79.904*2 ›› Percent composition by element

Explanation:

If 38.6 grams of iron react with an excess of bromine gas, the mass of FeBr2 can form is 149 grams.

Mass is defined as a way to gauge how much matter there is in a substance or thing. The kilogram (kg) is the fundamental SI unit of mass, while lower masses can also be measured in grams (g). Atoms make up everyday matter. A majority of an atom's mass is contained in its nucleus.

Given Fe = 38.6 g.

Fe has a molar mass = 55.845 g/mol.

Given mass/molar mass equals 38.6g/55.845gmol-1, or 0.6912 moles of iron.

The reaction is described as Fe + Br2 FeBr2.

One mole Fe yields 1 mole of FeBr2.

FeBr2 would be produced from 0.6912 moles of Fe.

FeBr2 has a molar mass of 215.65 g/mol.

Moles of FeBr2 x Molar mass of FeBr2

= 215.65 g/mole x 0.6912 mole

= 149.06 g FeBr2 produced is the formula.

Thus, if 38.6 grams of iron react with an excess of bromine gas, the mass of FeBr2 can form is 149 grams.

To learn more about mass, refer to the link below:

https://brainly.com/question/19694949

#SPJ2

Answer:

la primera va con la última

Answer:

The answer is A and C.

Explanation:

The reactants in the process of cellular respiration are oxygen and glucose, respectively. It is ATP that serves as the primary product of cellular respiration, with carbon dioxide and water serving as waste products.

Sugar is a glucose.

Oxygen and glucose are the two  substances that are reactants in the chemical reactions of cellular respiration. Therefore, the correct options are options A, C.

Through the process of cellular respiration, organisms mix oxygen with food molecules, directing the chemical energy contained in these substances towards life-sustaining processes while excreting carbon dioxide and water as waste. Foods are broken down by microorganisms that do not require oxygen in a process known as fermentation.

Adenosine triphosphate (ATP), an energy-rich compound that absorbs the chemical energy generated by the decomposition of food molecules then releases it to power other cellular functions, is one goal of the breakdown of foodstuffs. ATP is created when the energy found inside chemical bonds is converted from one form to another. Oxygen and glucose are the two  substances that are reactants in the chemical reactions of cellular respiration.

Therefore, the correct options are options A, C.

To know more about cellular respiration, here:

https://brainly.com/question/29760658

#SPJ2