2. Oil is leaking from an uncapped well and polluting a lake. Ten days after the leak is discovered, environmental engineers measure the amount of oil in the water to be 200 gallons with a current inflow rate of 30 gallons per day. The leak is slowing so that on the tenth day, the inflow rate is decreasing by 5 gallons/day each day. Suppose Q(t) is the amount of oil (in gallons) t days after the leak is discovered. (a) Find the second degree Taylor polynomial for Q(t) centered at t=10. (b) Use your answer in the previous part to estimate the amount of oil in the lake at t=12

a. The mean of X is 1.7549 and the standard deviation is 0.3536.

b. To calculate the proportion of washing machines that will last for more than 15 years, we need to use the standard normal distribution table. The z-score for 15 years is (15-14)/0.3536 = 2.822. Using the table, we find that the proportion of washing machines that will last for more than 15 years is 0.9968.

c. To calculate the proportion of washing machines that will last for less than 10 years, we need to use the standard normal distribution table. The z-score for 10 years is (10-14)/0.3536 = -2.822. Using the table, we find that the proportion of washing machines that will last for less than 10 years is 0.0032.

d. To calculate the 90th percentile of the life of the washing machines, we need to use the standard normal distribution table. The z-score for the 90th percentile is 1.28. Using the table, we find that the 90th percentile is 17 years.

To learn more about normal distribution refer :

https://brainly.com/question/29509087

#SPJ11

The triangles are similar by the AA similarity criterion since they have two pairs of congruent angles (41° and 109°, and 30°). Therefore, the answer is B. AA.

A triangle is a polygon that has three sides, three vertices, and three angles. It is the simplest polygon in Euclidean geometry and one of the most studied shapes in mathematics. The sum of the three angles in a triangle is always 180 degrees, and the length of one side of a triangle is always less than the sum of the other two sides. There are many different types of triangles, including equilateral triangles (where all sides are equal), isosceles triangles (where two sides are equal), and scalene triangles (where no sides are equal). Triangles are used in many areas of mathematics and science, including trigonometry, geometry, and physics.

Here,

To determine whether the two triangles are similar using AA similarity, we need to compare the angles of both triangles.

Triangle 1 has angles 41°, 30°, and 109°.

Triangle 2 has angles 30°, 41°, and 109°.

We see that the two triangles have two pairs of congruent angles, namely 41° and 41°, and 109° and 109°. Therefore, the two triangles are similar by the AA similarity criterion.

Note that the order of the angles does not matter when comparing triangles for similarity.

To know more about triangle,

https://brainly.com/question/13194650

#SPJ1

Therefore, when the equation  x = 72 - 3x, the value of 2 - 3x is -52.

An equation is a mathematical statement that shows the equality of two expressions. It typically contains one or more variables, which are symbols that can represent any number or value. The expressions on both sides of the equal sign are called the left-hand side (LHS) and the right-hand side (RHS) of the equation. Equations are used to describe relationships between quantities or to solve problems. They can be represented in various forms, including linear equations, quadratic equations, exponential equations, and trigonometric equations. Equations can be solved by performing operations on both sides of the equation to isolate the variable or variables.

Here,

When we are given that x = 72 - 3x, we can solve for x by first adding 3x to both sides of the equation:

x + 3x = 72

Combining like terms, we get:

4x = 72

Dividing both sides by 4, we get:

x = 18

Now that we know x = 18, we can substitute this value into the expression 2 - 3x:

2 - 3x = 2 - 3(18)

2 - 3x = 2 - 54

2 - 3x = -52

To know more about equation,

https://brainly.com/question/28243079

#SPJ1

Answer:

Step-by-step explanation:

xs nxqxm,nswjnej,cebxhjme2ckjwadbcweckslnvc

First, we need to find the value of g(pi/2):

g(pi/2) = cos(pi/2) = 0

Now we can substitute this value into f(x):

f(g(pi/2)) = f(0) = sin(0) = 0

Therefore, f(g(pi/2)) = 0.

The customers of Rhythm Time, an online music service, downloaded 397,970 songs last year.

Rhythm Time, an online music service, had 278,579 songs downloaded this year by its customers. That figure is 30% less than last year. Last year

We can begin by assuming that the total number of songs downloaded last year was x. According to the problem statement, 278,579 songs were downloaded this year, which is 30% less than last year. We can write it as an equation:x - 0.30x = 278,579 Simplifying, we get:0.70x = 278,579 Dividing both sides by 0.70, we get:x = 397,970Therefore, last year, Rhythm Time's customers downloaded 397,970 songs.

See more about total number at: https://brainly.com/question/9879870

#SPJ11

Based on the information in the diagram of circle P, the magnitude of the missing angle are as follows;

m∠BPC = 80 degrees.

m∠ADC = 205 degrees.

In Mathematics and Geometry, the central angle property states that an inscribed angle is equal to one-half the measure of a central angle that is subtended by the same arc.

Based on the information provided about circle P, the central angle of circle P is represented by m∠BPC and the measure of arc BC is equals to 80 degrees. Therefore, the magnitude of angle BPC is given by:

m∠BPC = 80 degrees.

Since m∠A is an inscribed angle, its magnitude can be calculated as follows;

m∠A = 1/2(m∠BPC)

m∠A = 1/2(80)

m∠A = 40 degrees.

For the magnitude of m∠ADC, we have:

m∠ADC = 360 - (80 + 75)

m∠ADC = 360 - 155

m∠ADC = 205 degrees.

Read more on central angle here: https://brainly.com/question/27203912

#SPJ1

The circle graphs which correctly represents the data in the table is "a circle graph with four sections, labeled vegetarian 30 percent, turkey 20 percent, ham 35 percent, and chicken 15 percent"

The correct answer choice is option B.

Type of Sandwich Number of Customers

Vegetarian 30

Turkey 20

Ham 35

Chicken 15

Total number of customers = 30 + 20 + 35 + 15

= 100

Percentage of each sandwich:

Vegetarian = 30/100 × 100

= 30%

Turkey = 20/100 × 100

= 20%

Ham = 35/100 × 100

= 35%

Chicken = 15/100 × 100

= 15%

Therefore, a circle graph with four sections, labeled vegetarian 30 percent, turkey 20 percent, ham 35 percent, and chicken 15 percent represents the table.

Read more on pie chart:

https://brainly.com/question/26851221

#SPJ1

Since both terms are perfect squares, factor using the difference of squares formula, [tex]a^2-b^2=(a+b)(a-b)[/tex] where [tex]a=b[/tex] and [tex]b=3[/tex]

Based on the information, the pollster's conclusion makes sense.

To know if the pollster is right with his conclusion we must perform the following operation.

In accordance with the above, we can infer that the pollster concludes that 54% of the people surveyed are equivalent to 545 people correctly because 0.86 is a minimum margin of error for this type of statistics. In addition, it can be inferred that the pollster correctly uses the statistics and study parameters of a sample to establish a correct conclusion.

Learn more about statistics in: https://brainly.com/question/30218856

#SPJ1

A hexagon with two lines

hope helped you please make me brainalist and keep smiling dude

I hope you are form India

The given square with a side length of one unit is known to contain five points. One must prove that at least two of these points are within square root 2/2 units of each other.

According to the Pigeonhole principle, "if n items are put into m containers, with n > m, then at least one container must contain more than one item."In this context, the square is the container, and the points inside it are the objects. If more than four points are picked, the theorem is true, and two points are nearer to each other than the square root of 2/2 units.

Let's place four points on the square's four corners. The distance between any two of these points is the square root of two units since the square's side length is 1.

Let's add another point to the mix. That point is either inside the square or outside it. Without loss of generality, let us assume that the point is inside the square. It must then be within the perimeter outlined by joining the square's corners to the point that was not a corner already.

The perimeter of the square described above is a square with a side length of square root 2 units.

Since we have five points in the square, at least two of them must be in the same smaller square, due to the pigeonhole principle. Without loss of generality, let's assume that two of the points are in the upper-left square. As a result, any points within this square are within the square root 2 units of any of the other four points. Hence, at least two points of the five selected are within the square root of 2/2 units of each other.

To know more about the "pigeonhole principle": https://brainly.com/question/13982786

#SPJ11

The magnitude and direction of the net force are found by adding the two forces together as resultant force vectors.

a) 11.82 N

b) 74.07°

To find the net force, we add the two force vectors F_1 and F_2:

Fnet = F_1 + F_2

Fnet = (1.31 + 4.6j) N + (3.2i + 6.8j) N

Fnet = 3.2i + (1.31 + 4.6j + 6.8j) N

Fnet = 3.2i + (1.31 + 11.4j) N

To find the magnitude of the net force, we use the Pythagorean theorem:

|Fnet| = sqrt[(3.2)^2 + (1.31 + 11.4)^2] N

|Fnet| ≈ 11.6 N

To find the direction of the net force, we use the inverse tangent function:

θ = tan^(-1)(y/x)

θ = tan^(-1)(11.4/3.2)

θ ≈ 73.8 degrees

Since the net force is in the first quadrant, the direction counterclockwise from the +x-axis is simply θ:

Direction = 73.8 degrees counterclockwise from the +x-axis

Therefore, the net force is Fnet = 3.2i + (1.31 + 11.4j) N, with a magnitude of approximately 11.6 N and a direction of approximately 73.8 degrees counterclockwise from the +x-axis.

To know more about the magnitude and direction of the "net force": https://brainly.com/question/10409611

#SPJ11

I inserted in an image below to help you with the rule.

The 1st point  is (6,1) . This becomes (1,-6).

The 2nd point is (-5,-6). This becomes (-6, 5)

By the congruence postulate, we have shown that the quadrilateral is  ΔAED ≅ ΔCED.

Let's start by showing that AD = CD. Since AB = AD and BC = CD, we can rewrite AB + BC as AD + CD. This means that AD = AB + BC - CD. But we know that AB = AD, so we can substitute AD for AB to get AD + BC = 2AD + CD. Simplifying this equation, we get AD = CD.

Next, we can show that AE = CE. Since AC is a diagonal of the kite, we know that AC bisects angle BAD and angle BCD. This means that angle BAC = angle DAC and angle BDC = angle CDC. Since AD = CD, we know that triangle ACD is isosceles, so angle ACD = angle CAD.

Using these angle equalities, we can conclude that angle CAE = angle CDE. Since AC ⊥ BD, we know that angle CAD = angle CDE, so we can conclude that triangle ACE is isosceles, which means that AE = CE.

Finally, we need to show that angle AED = angle CED. Since AD = CD and AE = CE, we know that triangles AED and CED have two pairs of congruent sides. Additionally, we know that AC is a common side of the triangles.

Since AC is perpendicular to BD, we know that angle ACD and angle BDC are complementary angles.

This means that angle ACD = 90 - angle BDC and angle CAD = 90 - angle BAC. Using these angle equalities, we can conclude that angle AED = angle CED.

To know more about quadrilateral here

https://brainly.com/question/29934440

#SPJ4

Answer:1st one

Step-by-step explanation:

Answer:

All of the statements are true.

The first statement is true because a graph represents all the possible solutions to an equation or function.

The second statement is true because a system of equations may have no solution, one solution, or infinitely many solutions, depending on the equations.

The third statement is true because graphing technology allows us to see the visual representation of the functions and their intersection points, which are the solutions to the system of equations.

The fourth statement is true because the solution to a system of equations is the point where both equations intersect and are true.

The fifth statement is also true because finding the x-coordinate of the point of intersection is equivalent to finding the solution to f(x) = g(x).

The sixth statement is true because systems of equations can involve any combination of linear, quadratic, exponential, or other functions.

The seventh statement is true because a table of values can only show a limited number of solutions, but finding the approximate solution between two values on the table can still be useful in many practical situations.

We can see that:

1.  True: A graph of an equation in two variables or a function represents an infinite number of solutions because each point on the graph corresponds to a solution of the equation or function.

2. True: A system of equations may not have an exact solution that meets the conditions of a real-world solution. It is possible for a system to have no solution or infinite solutions.

3. False: Using graphing technology is a very efficient way to find solutions to equations and systems of equations.

In mathematics, a graph is a visual representation or diagram that displays the relationship between different elements or variables.

4. True: The intersection point of two graphed functions represents the solution for a system of equations. The coordinates of the intersection point satisfy both equations simultaneously.

5. True: When two different functions f(x) and g(x) are graphed, the x-coordinate of the point of intersection represents a solution to the equation formed from f(x) = g(x). However, it's important to note that there could be multiple points of intersection, so the x-coordinate of the intersection is not necessarily the only solution.

6. True: Systems of equations may indeed be a combination of linear and non-linear functions. The equations in a system can involve various types of functions, including linear, quadratic, exponential, logarithmic, etc.

7. True: A table of values may not show every possible solution to a system of equations. It provides a limited set of data points, and there may be solutions that fall between the values in the table. However, finding an approximate solution that lies between two values in the table can be a reasonable approach in many situations.

Learn more about graph on https://brainly.com/question/19040584

#SPJ2

The complete question is seen below:

True or False:

A graph of an equation in two variables or a function is a representation of an infinite number of solutions to the equation or function.

A system of equations may not have an exact solution that meets the conditions of a real-world solution.

Using graphing technology is a very efficient way to find solutions to equations and systems of equations.

The intersection point of two graphed functions is the solution for a system of equations. It is the point that makes both equations true.

When two different functions f(x) and g(x) are graphed, the x-coordinate of the point of intersection is the solution to the equation formed from f(x) = g(x)

Systems of equations may be a combination of linear and non-linear functions.

A table of values very rarely shows every possible solution to a system of equations. Finding the approximate solution that is between two values on the table can be a good answer in many situations.

Answer: y is equal to 8

Step-by-step explanation:

by substituting the x for its vale of three we can add the two values to get 8 or y=8

Parachutist's rate during free fall is 40 meters per second and will fall approximately 490 meters during 10 seconds of free fall.

First, we need to convert 132 feet per second to meters per second. We know that 1 meter is equal to 3.3 feet, so we can use the following conversion factor:

[tex]$\frac{3meter}{3.3 feet}[/tex]

To convert feet per second to meters per second, we can multiply by the conversion factor:

[tex]132 (\frac{1}{3.3} ) = 40 meters/second[/tex]

Therefore, the parachutist's rate during free fall is 40 meters per second.

Next, we can use the following formula to find the distance the parachutist falls during 10 seconds of free fall:

distance =[tex]\frac{1}{2}[/tex] * acceleration * time²

where acceleration due to gravity is approximately 9.8 meters/second^2.

Substituting the given values, we get:

distance = [tex]\frac{1}{2}[/tex] * 9.8 meters/second² * (10 seconds)²

distance = 490 meters

Therefore, the parachutist will fall approximately 490 meters during 10 seconds of free fall.

To know more about Foot visit:

brainly.com/question/14230645

#SPJ1

The factοred fοrm οf a pοlynοmial is

1. 30b³- 54b² = 6b²(5b−9)

2. 3y⁵ - 48y³ = 3y³(y  −4)(y + 4)

3. x³ + 8 = (x + 2) (x² – 2x + 2²)

4. y³ - 64 = (y - 4) (y² – 4y + 4²)

5.  8c³ + 343(2c + 7)(4c² − 14c + 49)

The factοred fοrm οf a pοlynοmial is represented as a³ + b³ = (a + b) (a² – ab + b²). All equatiοns are cοmpοsed οf pοlynοmials. Earlier we've οnly shοwn yοu hοw tο sοlve equatiοns cοntaining pοlynοmials οf the first degree, but it is οf cοurse pοssible tο sοlve equatiοns οf a higher degree.

One way tο sοlve a pοlynοmial equatiοn is tο use the zerο-prοduct prοperty. If yοu remember frοm earlier chapters the prοperty οf zerο tells us that the prοduct οf any real number and zerο is zerο.

We will use the formula

a³ + b³ = (a + b) (a² – ab + b²)

And

a³ - b³ = (a - b) (a² – ab + b²)

1. [tex]30b^3-\ 54b^2[/tex]

⇒ 6b²(5b−9)

2. 3y⁵ - 48y³

⇒ 3y³(  y² - 16y)

⇒ 3y³(  y² - 4 + 4 - 16y)

⇒ 3y³(y  −4)(y + 4)

3. x³ + 8

⇒ x³ + 2³

Using a³ + b³ = (a + b) (a² – ab + b²)

⇒ x³ + 2³

⇒ (x + 2) (x² – 2x + 2²)

4. y³ - 64

⇒ y³ -  4³

Using a³ - b³ = (a - b) (a² – ab + b²)

⇒ y³ -  4³

⇒ (y - 4) (y² – 4y + 4²)

5. 8c³ + 343

Using a³ + b³ = (a + b) (a² – ab + b²)

2c + 7

(2c + 7)(4c² − 14c + 49)

To know more about factored form visit:-

brainly.com/question/29065045

#SPJ1

The system of inequalities of the company with the better offer is 75 + 20x ≤ y and 15 + 65x ≤ y

Let's use A to represent the total cost (in dollars) of purchasing a pool membership from the Aquatics Club,

Let S represent the total cost of purchasing a pool membership from the Swimming Hole.

Then we can write the following system of inequalities:

A = 75 + 20x (total cost of Aquatics Club membership)

S = 15 + 65x (total cost of Swimming Hole membership)

Alfonso has no more than y dollars to spend

So, we have

75 + 20x ≤ y

15 + 65x ≤ y

Hence, the system is 75 + 20x ≤ y and 15 + 65x ≤ y

Read more about system of inequalities at

https://brainly.com/question/23093488

#SPJ1

Answer:

the maximum height is 2 meters

Using trigonometric functions, the value of the side AC = 2.85 units.

The right triangle's angle serves as the domain input value for the six fundamental trigonometric operations, and the output is a range of numbers.

The angle, given in degrees or radians, is the domain of the trigonometric function, sometimes referred to as the "trig function," of  f(x) = sin, and the range is [-1, 1]. The other functions have a similar domain and scope. Trigonometric functions are widely used in algebra, geometry, and calculus.

Now in the given figure,

The angle is a right-angled triangle.

Now as per the trigonometric functions,

Sin 35° = AC/AB

⇒ 0.57 = x/5

⇒ x = 0.57 × 5

= 2.85.

The length of the opposite side AC is 2.85 units.

To know more about trigonometric functions, visit:

https://brainly.com/question/14746686

#SPJ1

The country won 45 silver medals and 75 bronze medals, for a total of 45 + 75 = 120 non-gold medals.

A medal is a small, flat, and usually round piece of metal that is awarded to individuals or groups as a symbol of recognition or honor for achievement, bravery, or other notable deeds. Medals can be made of various materials, such as gold, silver, bronze, or other alloys, and they often feature intricate designs or engravings that reflect the significance of the award.

According to the circle graph, gold medals make up 20% of the total medals, which means the country won 20% of 150 medals as gold, or 0.2 x 150 = 30 gold medals.

Similarly, silver medals make up 30% of the total medals, which means the country won 30% of 150 medals as silver, or 0.3 x 150 = 45 silver medals.

Finally, bronze medals make up 50% of the total medals, which means the country won 50% of 150 medals as bronze, or 0.5 x 150 = 75 bronze medals.

Therefore, the country won 45 silver medals and 75 bronze medals, for a total of 45 + 75 = 120 non-gold medals.

So the answer is 120.

To know more about medals visit:

https://brainly.com/question/29023646

#SPJ1

Nicolas drinks 3/2 liters of water in total - 1/3 liters of water in the morning, 1/2 liter of water at lunch, and 2/3 liter of water during basketball practice.

Nicolas drinks to third liter of water in the morning, which is 1/3 liters of water. At lunchtime, he drinks 1/2 litre of water. During basketball practice, he drinks another 2/3 liter of water.

To find the total amount of water that Nicolas drinks, we need to add these quantities together:

Total amount of water = 1/3 + 1/2 + 2/3

To add these fractions, we need to find a common denominator, which is 6 in this case. We can convert each fraction to have a denominator of 6 as follows:

1/3 = 2/6

1/2 = 3/6

2/3 = 4/6

Now we can add the fractions with the same denominator:

Total amount of water = 2/6 + 3/6 + 4/6

Total amount of water = 9/6

We can simplify this fraction by dividing both the numerator and denominator by 3:

Total amount of water = 3/2

Therefore, Nicolas drinks 3/2 litres of water in total.

To know more about amount of water:

https://brainly.com/question/29266584

#SPJ4

84500 reams of paper are the total amount the two companies sell in the past five years.

65500 is the amount that Company B performed better than company A.

A company can be defined as the part in which the main aim or goal is to earn a profit. This was to generate the income that they will be having in the firm. There are various employees that are present in the company and work towards a common goal.

The Amount that is made by company A is

[tex]7.5 \times 10000[/tex]

[tex]=75000[/tex]

The amount of paper manufactured by company B is

[tex]= 9.5 \times 1000[/tex]

[tex]= 9500[/tex]

A) The total that is made by both companies in 5 years will be

[tex]= \text{Company A + Company B}[/tex]

[tex]= 75000 + 95000[/tex]

[tex]= 84500[/tex]

B) Company B made better products as compared to Company A

[tex]= \text{Company B - Company A}[/tex]

[tex]=75000 - 9500[/tex]

[tex]=65500[/tex]

Learn more about Company, here:

https://brainly.com/question/27238641

Answer:

Step-by-step explanation:

You want the sum and difference of 7.5×10^4 and 9.5×10^3.

Numbers are most conveniently added or subtracted in scientific notation when the multipliers have the same exponent. For this we can rewrite Company B's volume as ...

  9.5×10^3 = 0.95×10^4

  total sales = 7.5×10^4 + 0.95×10^4 = 8.45×10^4 = 84,500

  difference in sales = A -B = 7.5×10^4 -0.95×10^4 = 6.55×10^4 = 65,500

__

Additional comment

You can enter the numbers "as is" in a calculator or spreadsheet and format the output in whatever form you need.

So, the right response is that, in order to more accurately fit the scatterplot that depicts a curve in the data, you need add a quadratic component while performing regression.

As ax² +bx + c, a quadratic equation can be expressed. In a quadratic equation, the largest exponent is 2, which limits the number of terms to a maximum of 3. These terms are exponent 2 (ax²) and exponent 1 (bx) fixed term.

Regression can be improved by including a quadratic component to better match scatterplots of data that display curves. This is so that the independent and dependent variables can have a nonlinear connection, which is made possible by a quadratic term. A quadratic component can assist capture inherent curvature of a data and enhance the fit of a regression model in cases where the connection between both the variables isn't really strictly linear.

A quadratic term may not be appropriate or required, though. A quadratic factor would not increase the model's fit if the variables' relationships are strictly linear and might even result in overfitting. In addition, if the scatterplot contains too many anomalies or the data is not consistent, adding a quadratic factor might not be beneficial.

In order to properly fit a scatter plot graph that depicts a curve in the data, the correct response is you would like to add a quadratic term while performing regression.

To know more about quadratic visit:

brainly.com/question/22364785

#SPJ1

Answer:

6 5/6 cups

Step-by-step explanation:

Add.

4 2/3 = 4 4/6

4 4/6 + 2 1/6 gives 6 5/6 cups were used in all.

Hope this helps!

The number of individuals who are homozygous dominant (VV) is 160 individuals, and the number of individuals who are heterozygous (Vv) is 320 individuals.

The population of Drosophila has 1000 individuals, 360 of which display the recessive phenotype. Homozygous dominant and heterozygous for this trait in Drosophila would be expected to be found in how many individuals?

In Drosophila, the dominant allele for normal-length wings is denoted as 'V' and the recessive allele for vestigial wings is denoted as 'v.'To determine the number of individuals who are homozygous dominant or heterozygous for this trait, we'll first determine the number of individuals who are homozygous recessive:

Homozygous recessive individuals in the population = number of individuals displaying the recessive phenotype = 360

This indicate that there are 360 individuals with the genotype vv (homozygous recessive), which will be used to determine the remaining genotypes via the Punnett square. To get the number of individuals who are heterozygous (Vv), we first need to identify the number of individuals with the dominant V allele (VV and Vv). The sum of these two genotypes equals the total number of individuals minus the homozygous recessive individuals, as follows:

Total number of individuals - homozygous recessive individuals = (VV + Vv) individuals+ (vv) individuals = 1000 individuals

Hence, VV + Vv = 1000 - 360 = 640 individuals.Now that we know VV + Vv = 640, we can use the expected genotypic ratio of 1:2:1 to calculate the number of homozygous dominant (VV) and heterozygous (Vv) individuals.1:2:1 represents the expected genotypic ratio in the progeny derived from a cross involving two heterozygotes of the same gene. The first "1" represents the proportion of dominant homozygotes, the second class, or class "2", the heterozygotes, and the second "1" the recessive homozygotes.

Therefore, homozygous dominant (VV) and heterozygous (Vv) individuals in the population would be expected in the following ratio:VV:Vv:vv = 1:2:1. Therefore, the number of individuals who are homozygous dominant (VV) is 1/4 of the total individuals (VV + Vv + vv):

Number of individuals who are homozygous dominant (VV) = 1/4 (VV + Vv + vv)= 1/4 (640) = 160 individuals

And the number of individuals who are heterozygous (Vv) is 2/4 of the total individuals (VV + Vv + vv):

Number of individuals who are heterozygous (Vv) = 2/4 (VV + Vv + vv)= 2/4 (640) = 320 individuals

Therefore, the number of individuals who are homozygous dominant (VV) is 160 individuals, and the number of individuals who are heterozygous (Vv) is 320 individuals.

To know more about homozygous dominant: https://brainly.com/question/16681975

#SPJ11

Answer:

i think 16 im not sure

Step-by-step explanation: