Answer:
This process is know as Chromotography
Explanation:
Assertion : When the added electron goes to smaller n=3 quantum level, the electron-
electron repulsion is much less.
Reason: The added electron occupies a smaller region of space .
It is due to low volume of electron that causes large distance between two electrons.
When the added electron goes to smaller quantum level, the repulsive force between two electrons is less because the electron which is added occupies small space due to less volume so there is a large distance between two electrons that leads to less force of repulsion.
If the electron has more volume so it occupies more space and there will more repulsive force between two electrons so that's why we can say that the smaller volume of electron is the reason of less repulsive force.
https://brainly.com/question/24387646
what is force ?write its effects.
Answer:A force is a push or pull upon an object resulting from the object's interaction with another object.
A force acting on an object causes the object to change its shape or size, to start moving, to stop moving, to accelerate or decelerate
!!DUE TODAY, NEED HELP ASAP!!
A student measured the masses of some aluminum and copper cylinders of different volumes. The data is displayed below:
Aluminum: Copper:
Volume (mL)
Mass (g)
Volume (mL)
Mass (g)
3.7
9.99
1.8
16.02
6
16.2
2.3
20.47
8.5
22.99
3.5
31.15
10.74
29
4.2
37.38
15
40.5
5.8
51.62
On graph paper graph the data above on ONE graph. Use the graph paper so the longer side is your y-axis.
Use up the majority of the graph paper. Do not make a small graph!
Use a ruler/straight edge so you graph is neat.
You will need to plot the points for each substance and create a double line graph. When connecting your points for each substance, continue the lines past the plotted points.
Be sure to include a key to identify the substances.
Make your X-axis volume(mL) and your Y-axis mass(g)
Look at the numbers for both substances when creating your scales. You will most likely have a different scale for mass and volume. What is the lowest number? What is the highest number? What does it make sense to go by?
Calculate the density of each metal.
Aluminum:_________________________ Copper:________________________
What happens to the mass of the copper at the volume increases from 6 to 8mL?
Which sample is more dense? How does the graph show you this?
Answer: The data are not arranged in a useful pattern. I arranged them as best I could and made a graph in Excel for demonstration.
Explanation: The data are plotted with mass on the x axis and volume on the y. Add a key to identify the top line as CU and the bottom as Al.
The density of Cu is 8.9 g/ml and 2.70 for Al.
The mass of copper increases by 17.8 grams going from 6 to 8 ml. (8.9 g/ml)*(2 ml) = 17.8 grams.
Copper is more dense. c The graph shows that for the same volumes, copper has the higher mass.
Freezing water cracking limestone
a
Chemical Change
b
Physical Change
Answer:
Freezing water and cracking limestone are physical changes.
PLZ HELP MEEE
A tire company wants to determine what kind of rubber will last the longest for their tires. What are some variables that the researchers will want to make controlled variables?
In an experiment, we can define 3 types of variables.
Independent variables: Are these ones that the scientist can control and modify, in this case, would be the kind of rubber for the tires.
Dependent variables: Are the variables that react to the changes in the independent variables. In this case, would be "how much lasts each type of rubber".
Controlled variables: Are all of these variables that also have an impact on the dependent variable, so we need to control them (fix them) so they do not affect the study of the independent variable.
So, for this particular experiment, to find controlled variables we need to think on what things do affect the durability of tires.
Some examples can be:
The material of the ground where the tires are being tested.The temperature of the ground where the tires are being tested.The type of car where the tires are being tested.The speed at which the tires are being tested.The internal pressure at which the tires are being tested.If you want to learn more, you can read:
https://brainly.com/question/17687509
sound travels at 331m/s. How long would it take for sound to travel across lake tahoe, which is 21.6 miles long
Answer:
It would take sound 104.998 seconds to travel across lake tahoe.
Explanation:
First let's convert the miles to meters, so, 21.6 miles = 34754.4 meters
Now, we will divide this number in meters by 331. So, 34754.4 / 331 = 104.998
And what will the unit be? Seconds will be the unit for time here so 104.998 seconds.
What is the control in the experiment?
Answer:
C. the amount of drug x given to mice
what is sublimation
Explanation:
Sublimation is the conversion of a substance from the solid to the gaseous state without its becoming liquid. ... Freeze-drying of food to preserve it involves sublimation of water from the food in a frozen state under high vacuum. See also vaporization; phase diagram.
Which of the following statements about alcohols is false?
A. Ethanol is soluble in water.
B. Ethanol has a higher boiling point than ethane.
C. Ethanol produces hydrogen when it burns.
D. None of these
Answer:
It's C. Ethanol produces hydrogen when it burns
When burned, ethanol produces water and CO2.
English
M.
3.x - 9
2r-7
.X + 2
18
Answer:
it will come answer 21 write
Compare and contrast the three types of mixtures (solutions, colloids, and suspensions).
Answer:
solutions is a homogenous mixture while colloids and suspensions are heterogeneous mixtures made up of 3 or more substances
Explanation:
homogeneous- made up of one thing
heterogeneous- made up of 2 or more things
Vapor pressure of any liquid _______. A. increases with increases in temperature B. increases with decreases in temperature C. is not affected by changes in temperature D. increases with increases in volume of the liquid E. None of the Above
Answer:
increase with increases in temperature
Explanation:
please mark me brainleast
Chewing food to break it down into smaller particles represents a physical change, but the charging of starch into sugars by enzymes in the digestive system represents a chemical change.Chemical or physical change?
Answer:
Chemical changeExplanation:
The charging of starch into sugars by enzymes in the digestive system shows a chemical change.[tex]\tt{ \green{P} \orange{s} \red{y} \blue{x} \pink{c} \purple{h} \green{i} e}[/tex]
Which of these are PHYSICAL changes?
А.
cutting, tearing, freezing, thawing, folding.
mixing without chemical changes
B.
burning, rusting, forming a new substance from
two different substances, exploding, cooking
Answer:
the answer to this problem is a
cuantos gramos de soluto y solvente tendra 127 gramos de solición cuya concentración es 14% m/m ayuda para resolverlo
banetshegtsjegsgeheb
All the following process produces hematite except
A roasting of siderite
B oxidation of iron
C oxidation of magnetite
D drying of limonite
E no correct answer
Answer:
D)driying of limonite these is the answer
what is the concentration of hydrogen ion, H+, present in a water sample if 100. ml of the sample requires 7.2 ml of 2.5 x 10 -3 M NaOH to be neutralized
Answer: 1.8x10^-4 M H+
Explanation: The number of moles of NaOH added to the 100 ml soultion will be equal to the number of moles of H+ present in that solution.
Moles NaOH in 7.2 ml of 2.5x10^-3 M NaOH
(2.5x10^-3 M NaOH) is the same as 2.5x10^-3 moles NaOH/liter
(2.5x10^-3 moles NaOH/liter)*(7.2 ml)*(1 liter/1000ml) = 1.8x10^-4 moles NaOH used to titrate 100 ml of the acid. That means there was 1.8x10^-4 moles of H^+ in 100 ml.
Concentration of H^+ = (1.8x10^-4 moles H)/0.100 l) = 1.8x10^-4 M H+
(pH of 3.74)
will mark brainliest if correct
Which methods separate a mixture according to the size of the particles?
a
filtration and chromatography
b
distillation and chromatography
c
filtration and evaporation
d
distillation and evaporation
Answer:
filtration and chromatography
Explanation:
I hope this will help you :-)
ASAP. Five stars + brainless.
A procedure calls for 4 parts reagent A to 16 parts water.What is the dilution of reagent A in water?
a) 4/16
b) 1/5
c) 1/4
d) 4/12
my guess answer iss 1/4 if incorrect sorr
1/5 is the dilution of reagent A in water.
Explanation:
The dilution factor of the diluted solution is determined by dividing the final volume of the diluted solution by the volume of the undiluted solution.[tex]D.F.=\frac{V_f}{V_i}[/tex]
Where:
D.F = Dilution factor
[tex]V_f[/tex] = Final volume of the diluted solution
[tex]V_i[/tex]= Initial volume of the undiluted solution
And the dilution is represented as 1 : D.F.Given:
4 parts of the reagent and 16 parts of water are mixed together to form a diluted solution.
To find:
The dilution of reagent A in water
Solution:
Parts of reagent A =[tex]V_i = 4[/tex]
Parts of water = 16
Final volume of solution = [tex]V _f = 4 + 16 = 20[/tex]
The dilution factor of reagent A:
[tex]D.F=\frac{20}{4}=5[/tex]
The dilution of the reagent A = [tex]1:5=\frac{1}{5}[/tex]
1/5 is the dilution of reagent A in water
Learn more about Dilution here:
brainly.com/question/9920151?referrer=searchResults
brainly.com/question/15213606?referrer=searchResults
Plzzzzzz help me Write electronic configuratof sodium and chlorine in the term of subshell ?
Answer:
ans:Ne=2,8,1
ans:2,8,7
Come up with 2 examples of derived units from everyday life.
Answer:
answer
Explanation:
Area : Square Meters,
Volume : Cubic Meters,
Density : Kilograms per Meter Cube,
Velocity : Meters per Second Squared,
Force : Newtons (Mass multiplied by Acceleration or Mass multiplied by Displacement divided by Time squared)…..
A pan containing 20.0 grams of water was allowed to cool from a temperature of 95.0 °C. If the amount of heat released is 1,200 joules, what is the approximate final temperature of the water?
75 °C
78 °C
81 °C
87 °C
Answer:
81 °C
Explanation:
This is a calorimetry question so a few things you will need for this. The calorimetry equation q=mcΔT & the specific heat of water (4.2J/g•°C). Other definitions are:
q = heat added/released by a sample
m = mass of sample
c=specific heat of sample
ΔT = change in temperature
from here we can rearrange the equation to state:
q/(mc) = ΔT
1200J/((20.0g)(4.2J/g•°C)) = ΔT
14°C = ΔT
If the starting temperature was 95.0°C and we know that the temperature was cooled by 14°C then the final temperature of the water would be 81.
Answer:
C. 81 c
Explanation:
took the test :)
What causes the pressure inside oxygen tanks to change as they are filled?
A. The volume of the container changes.
B. The temperature of the gas changes.
C. The number of gas molecules changes.
D. The pressure outside the tanks changes.
Answer:
the answer is the number of gas molecules changes.
May someone help me with the answer to this question I’ve been stuck on it
Explanation:
No, that would be incorrect
Answer:
There arre two main parts of the atom, the nucleus and the orbital rings. The three subatomic particles are contained in each of these, the proton and neutron together in the nucleus and the electrons orbiting in the rings.
Density and Years: What do you know?Objectives: determine and compare density of pennies to assess composition. Procedure:1. Read the directions and create a data table accordingly.2. Place 15-20 pennies in order of consecutive dates. Find the mass of each penny and record.3. Find the volume of all 5 pennies by water displacement and record in your data table. Record the volume adding 5 more pennies at a time until you have measured them all (15-20).a. Find the average volume of 1 penny.4. Calculate the density of each penny and graph according to the year.5. If the density of copper is 8.96 g/cm3 what would the mass of a pure copper penny be?6. Draw a conclusion.7. How might this relate to a real world example?
Answer:I dunno
Explanation:it is the best thing I ever said in this app
Describe the color change that would be observed in water in left hand beaker
Answer:
is there supposed to be a photo with this?
Explanation:
Give an example of a non-biological chemical reaction that involves carbon. Name the process that converts a solid compound into a gas.
Answer: The combustion of methane (CH4) with O2.
Explanation: This is a chemical reaction involving carbon:
CH4 + 2O2 = CO2 + 2H2O
Help!! due tomorrow
.
Answer:
It's B. The molecules in the system have more kinetic energy than a solid.
Element Z has 2 natural isotopes. One isotope has a mass of 15.0 amu and a relative abundance of 30%. The other isotope has a mass of 16.0 amu. What is the second isotope's relative abundance?
Answer:
70%
Explanation:
Just substract 100 % - 30%
What is the approximate mass of one electron?
Answer:
9.1093837015 × 10^−31 kg
Very small mass
