In an ionic compound, the negative and positive ions are held together by __________.
Answer:
the third one
Explanation:
Mark and Amanda conduct the same investigation as Nguyen, but they use four rocks. They test the same three rocks as Nguyen but add one more rock that has the same color and density as limestone. However, the rock doesn't produce bubbles when acid is added to it. Explain how the mineral composition of this rock compares with that of limestone?
Answer:
The Rock does not contain carbonate in it.
Explanation:
Limestone(CaCO_3) when reacts with a acid produces carbon dioxide, which comes out as bubbles in the solution. It means the 4th rock does not have carbonate in it. Carbonate minerals are unstable in contact with hydrochloric acid. When acid begins to effervesce (fizz) on a specimen. These bubbles confirms the presence of carbonate in mineral.
Answer:
no,exept y and z are similar
Explanation:
litterly what it says '-'
How many grams are in 2.3 moles of O?
Answer:
36.8 g/mol of O
Explanation:
To find the number of grams, multiply the number of moles by the atomic mass of the element.
Oxygen has an atomic mass of 16.00.
2.3 moles O × (16.00 g O ÷ 1 mole) = 36.8 g/mol O
Hope that helps.
Heat is transferred in all but which way.
Select one:
a. convection
b. sublimation
c. conduction
d. radiation
Btw I know it’s science but chem was closest thing to that
NEED ANSWER ASAP HELP!!!!
Answer:
1. 4 Km
2. 40 minutes
3. 0.1 Km/min
Explanation:
1. Determination of the total distance travelled.
From the graph given in the question above, we can see that the total distance travelled by the object is 4 Km since the path taken by the object in the graph ends at the 4 km mark.
2. Determination of the Time taken.
A careful observation of the graph given in the question shows that the entire trip took 40 minutes since the distance travelled by the object ends at the 40 minutes mark on the graph.
3. Determination of the average speed of the object.
Total distance = 4 Km
Total time = 40 mins
Average speed =..?
Average speed = Total distance / total time
Average speed = 4 / 40
Average speed = 0.1 Km/min
How many atoms are in a molecule of RSq?
A solution is a mixture where one substance is dissolved in another. One example of a solution is salt water. Why does salt water appear to be a single substance even though it contains more than one substance? A. Each component in salt water retains its original physical properties. B. The components in salt water cannot be separated from each other. C. The particles in salt water are spread throughout. D. Salt water is a solution and also a pure substance.
Answer: C. The particles in salt water are spread throughout.
Explanation:
Homogeneous mixtures: It is a mixture that has uniform composition throughout the solution and the particle size or shapes are not different. There is no physical boundary between the dispersed phase and dispersion medium. Example: Salt dissolved in water.
Heterogeneous mixtures: It is a mixture that has non-uniform composition throughout the solution and the particle size or shapes are also different. There is a physical boundary between the dispersed phase and dispersion medium. Example: sand in water.
Answer:
Its c
Explanation:
A solution is a mixture where one substance is dissolved in another. One example of a solution is salt water. Why does salt water appear to be a single substance even though it contains more than one substance. Got it right in school city
Describe four ways by which organisms reproduce asexually
Answer: thay can't make cells
Explanation:
El salmón percibe la presencia del 2-feniletanol (C5H5-CH2-CH2-OH) en el agua, en cantidades tan bajas como 0.03 mole en cien trillones (1*10^18) de litros de agua, ¿cuál es la masa, en gramos, de esa sustancia? ¿Qué cantidad de moléculas equivale a esa sustancia?
Answer:
3.66 g de 2-feniletanol (C5H5-CH2-CH2-OH)
1.8 * 10 ^ 22 moléculas
Explanation:
Sabemos que podemos obtener la masa de una sustancia a partir del número de moles presentes de la siguiente manera;
número de moles = masa / masa molar
masa molar de 2-feniletanol (C5H5-CH2-CH2-OH) = 122,16 g / mol
masa = 0.03 moles * 122.16 g / mol = 3.66 g de 2-feniletanol (C5H5-CH2-CH2-OH)
Si 1 mol = 6.02 * 10 ^ 23 moléculas
0.03 moles = 0.03 moles * 6.02 * 10 ^ 23 moléculas = 1.8 * 10 ^ 22 moléculas
Pls predict and balance the following Chemical equations 30points (5 per question)
Will mark Brainliest
1. Na2(SO4) (aq) + Ba(NO3)2(aq) -->
2. Na(NO3)(aq) + NH4Cl(aq) -->
4. ZnCl2 (aq) + K (SO4) (aq) -->
5. ZnCl2 (aq) + Na2S (aq) -->
6. Na(C2H3O2) (aq) + Ag(NO3) (aq) -->
Answer:
1. Na2SO4 + Ba(NO3)2 → NaNO3 + BaSO4
2. NaNO3 + NH4Cl → NaCl + NH4NO3
4. Sorry, I don't know
5. Refer to the attachment..
6. NaC2H3O2(aq) + AgNO3(aq) = NaNO3(aq) + AgC2H3O2
Hope it can help you and please mark me as a brainlist...[tex] \huge{\blue{Thank \: you}}[/tex]
List and describe three types of clouds.
Type here:
Plz hurry
Answer:
Cumulus clouds look like fluffy, white cotton balls in the sky. Since they are so thin, they seldom produce much rain or snow.
Cumulonimbus clouds are menacing looking multi-level clouds, extending high into the sky in towers or plumes. More commonly known as thunderclouds, cumulonimbus is the only cloud type that can produce hail, thunder and lightning.
Nacreous clouds are some of the rarest clouds on the planet. They are a form of polar stratospheric cloud, which is a main culprit in chemical destruction of the ozone layer.
Explanation:
Pls help!!! it’s a timed answer
Answer:
Explanation
whats your question
a sample of methane gas at a pressure of 0.815 atm and a temperature of 265 C occupies a volume of 416 mL. If the gas is heated at constant pressure until its volume is 593 ml the temperature of the gas will be _________ C
Answer:
493.9°C
Explanation:
Given parameters:
Initial pressure =0.815atm
Initial temperature = 265C = 265 + 273 = 538k
Initial volume = 416mL = 0.416L
New volume = 593mL = 0.593L
Unknown:
New temperature =?
Solution:
Since we are dealing with constant pressure condition, we apply charles's law.
It states that the volume of a fixed mass of gas varies directly as its absolute temperature if the pressure is constant.
Mathematically ;
[tex]\frac{V1}{T1}[/tex] = [tex]\frac{V2}{T2}[/tex]
V1 is the initial volume V2 is the new volume
T1 is the initial temperature T2 is the new temperature
[tex]\frac{0.416}{538}[/tex] = [tex]\frac{0.593}{T2}[/tex]
T2 = 766.9K;
In °C = 766.9 - 273 = 493.9°C
Will mark the brainiest later for correct answers! Please show work.
Mass C12H22O11 = 14.08g
Convert grams to moles:
Convert grams to molecules:
Mass NaCI: 17.75g
Convert grams to molecules:
Convert grams to formula units:
Copper (II) Sulfate Pentahydrate
Chemical Formula: CuSO4.5H2O
Mass: 20.06g
Convert grams to moles:
Formula Units:
Answer:
According to avogadro's law, 1 mole of every substance contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles and weighs equal to its molecular mass.
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]
[tex]\text{Number of moles}=\frac{\text{Given molecules}}{\text {Avogadros number}}[/tex]
a. moles in 14.08 g of [tex]C_{12}H_{22}O_{11}[/tex] = [tex]\frac{14.08g}{342.3g/mol}=0.04113moles[/tex]
molecules in 14.08 g of [tex]C_{12}H_{22}O_{11}[/tex] = [tex]0.04113\times 6.023\times 10^{23}=0.2477\times 10^{23}[/tex]
b. moles in 17.75 g of NaCl = [tex]\frac{17.75g}{58.5g/mol}=0.3034moles[/tex]
molecules in 17.75 g of [tex]NaCl[/tex] = [tex]0.3034\times 6.023\times 10^{23}=1.827\times 10^{23}[/tex]
formula units 17.75 g of [tex]NaCl[/tex] = [tex]0.3034\times 6.023\times 10^{23}=1.827\times 10^{23}[/tex]
c. moles in 20.06 g of [tex]CuSO_4.5H_2O[/tex]= [tex]\frac{20.06g}{249.68g/mol}=0.08034moles[/tex]
formula units in 20.06 g of [tex]CuSO_4.5H_2O[/tex]= [tex]0.08034\times 6.023\times 10^{23}=0.4839\times 10^{23}[/tex]
If we react 5.4g of sodium chloride with an unknown amount of fluorine gas, we produce 4.9g of sodium fluoride and 3.7g chlorine gas. How much fluorine was consumed in the reaction?
Answer:
1.9g of F₂ were consumed in the reaction
Explanation:
Based on the chemical reaction:
2NaCl + F₂ → 2 NaF + Cl₂
Where 2 moles of NaCl react per mole of F₂ to produce 2 moles of NaF and 1 mole of Cl₂
To understand in a better way how the reaction occurs we need to convert each mass of compound to moles:
Moles of NaCl -Molar mass: 58.44g/mol-:
5.4g * (1mol / 58.44g) = 0.092 moles NaCl
Moles of NaF -Molar mass: 41.988g/mol-:
4.9g * (1mol / 41.998g) = 0.12 moles NaF
Moles of Cl₂ -Molar mass: 70.90g/mol-:
3.7g * (1mol / 70.90g) = 0.052 moles Cl₂
That means approximately 0.1 moles of NaCl react with 0.05 moles of F₂ to produce 0.1moles of NaF and 0.05 moles of Cl₂.
0.05 moles of F₂ are:
0.05 moles * (38g/mol) =
1.9g of F₂ were consumed in the reactionWhich bond is most polar?
ОА СО
ов So
Осно
ODNO
Answer:
either first or second if not them try d but I'm pretty sure a also I'm sorry if I getbyou this wrong I dearly apologize
this is just to make sure but plz help
How many grams of water are produced from the decomposition of 63 grams of lithium hydroxide
(LiOH)?
Answer:
18.65004 grams H2O
Explanation:
First, we need to write down the balanced chemical equation for the decomposition reaction:
2LiOH -> H2O + Li2O
Since we have grams of LiOH and we need to know the grams of water, we need to convert to moles since we can only compare moles to moles.
The amu of LiOH is 23.947.
The given grams of LiOH is 63.. To convert to moles, we will divide 63 by 23.947..
This gives us 2.6310 moles LiOH..
To convert to moles of H2O (and later grams of H2O), we will use the mole fractions from the balanced equation...
When we look at the balanced equation we can see that 2 moles of LIOH can produce 1 mol of Water, so:
2.6310 moles [tex]* \frac{1 molH_{2}O}{2 mol LiOH}[/tex] = 1.3155 moles H2O
Now we will convert from moles to grams (we must multiply by the amu)
1.3155 moles H2O = 18.65 grams H2O
According to stoichiometry of the chemical equation of decomposition of lithium hydroxide 23.6 g of water are produced from the decomposition of 63 grams of lithium hydroxide.
What is stoichiometry?Stoichiometry is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.It is useful in balancing chemical equations.
In the given example, as 47.9 g of lithium hydroxide produces 18 g water ,therefore 63 of lithium hydroxide will produce 63×18/47.9=23.6 g of water.
Thus, 23.6 g of water are produced from the decomposition of 63 grams of lithium hydroxide.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ2
How many moles of carbon dioxide (CO2) does 250 grams of the substance have? How many
molecules of CO2 are there? The molar mass of CO2 is 44.01 g/mol.
Explanation:
Given parameters:
Mass of carbon dioxide = 250g
Molar mass of carbon dioxide = 44.01g/mol
Unknown:
Number of moles of carbon dioxide = ?
Number of molecules of carbon dioxide = ?
Solution:
We first find the number of moles of carbon dioxide;
Number of moles = [tex]\frac{mass}{molar mass}[/tex]
Number of moles = [tex]\frac{250}{44.01}[/tex] = 5.68moles
From mole concept;
1 mole of a substance contains 6.02 x 10²³ molecules
5.68 mole of carbon dioxide will contain 5.68 x 6.02 x 10²³
= 3.42 x 10²⁴molecules
a sample of carbon dioxide gas at a pressure of 1.10 atm and a temperature of 20.6 occupies a volume of 19.2 L. If the gas is allowed to expand at constant temperature to a volume of 24.3 L, the pressure of the gas sample will be ________ atm
Answer:
0.87atm
Explanation:
Given parameters:
Pressure of the gas = 1.1atm
Initial temperature = 20.6°C = 20.6 + 273 = 293.6K
Initial volume = 19.2L
New volume = 24.3L
Unknown:
New pressure = ?
Solution:
To solve this problem, we apply the Boyle's law equation:
P1V1 = P2V2
P and V are pressure and volume
1 and 2 are the initial and new states
1.1 x 19.2 = P2 x 24.3
P2 = 0.87atm
HEEEEELP PLZ
Which conclusion is most logical, based on the data?
Answer:
its the last one
Answer:
D
Explanation:
The discovery of protons and electrons most directly refuted or replaced the idea that
a. atoms contain a nucleus
b. the atom resembles plum pudding
c. the atom is electrically neutral
d. the atom is indivisible
Which statement accurately represents the properties of these moles.. help ASAP, teacher didn’t teach me this
Answer:
1 mole of O₂ has more mass compared to 1 mole of Na
Explanation:
1 mole oxygen atom and 1 mole of Na atom has the same number of particles.
A mole of any substance has the Avogadro number of particles which is
6.02 x 10²³
Mass of a substance = number of moles x molar mass
Molar mass of O₂ = 2(16) = 32g/mol
Molar mass of Na = 23g/mol
Mass of O₂ = 1 x 32 = 32g
Mass of Na = 1 x 23 = 23g
So, 1 mole of O₂ has more mass compared to 1 mole of Na
for an electron to move from an energy level that was close to the nucleus to an energy level that is far from the nucleus would it need to gain or lose energy ?
Answer:
it would need to lose energy
Explanation:
I don't really have an explanation
As the electrons gets closer to the nucleus, by the electrostatic force of attraction electrons are tightly bound to the nucleus. To move the inner electron to outer shell, high energy have to applied to weaken the nuclear force.
What is nuclear force?Nuclear force is the force by which the nucleon are bind in the nucleus and electrons are attracted towards the nucleus. The positively charged protons inside the nucleus electrostatically attracts the negatively charged electrons.
The minimum amount of energy required to remove an electron from the valence shell by overcoming the nuclear force is called ionization energy.
To bring an electron which is closer to the nucleus to the outer shell needs much energy to reduce the nuclear attractive pull. The energy need to gain.
Find more on ionization energy:
https://brainly.com/question/28385102
#SPJ2
why water is not used as a thermometric substance
Answer:
Water can be used as the thermometric liquid. It expands and contracts with temperature so it can be used. It's just not a very good choice because: It's thermal expansion is not very large compared to other liquids like mercury.
Explanation:
Hope this help
How many moles are in 43.5 g of sodium hydroxide (NaOH)?
Answer:
1.09 moles of NaOH
Explanation:
First of all, to calculate moles, you need to find the molar mass of NaOH.
Let us first find the molar mass of NaOH then.
Na = 23.0 amu
O = 16.0
H = 1.0
They are 1 nitrogen atom, 1 oxygen atom, and one hydrogen atom.
So do this.
23.0(1) + 16.0(1) + 1.0(1) = 40 g/mol.
Now use dimensional analysis to show your work
43.5 g of NaOH * 1 mol of NaOH / 40 g/mol of NaOH
The grams cancel out.
43.5 / 40.0 = 1.0875
Use sig figs and round the answer to the nearest hundredths place.
1.0875 = 1.09
So the final answer is 1.09 moles of NaOH
Hope it helped!
How do you calculate the percent composition of an element in a compound
Answer:
Percent composition is calculated from a molecular formula by dividing the mass of a single element in one mole of a compound by the mass of one mole of the entire compound. This value is presented as a percentage.
Explanation:
The element oxygen, represented by the symbol O, is classified as
A. a compound.
В. a mixture.
C. a solution.
D. a pure substance.
Please help soon! :))
How do ocean currents affect the air temperature of Buenos Aires and Cape Town? this is for science
4.0 moles of H2O would have what mass?
Group of answer choices
18 g
23 g
68 g
72 g
Answer:
How many moles H2O in 1 grams? The answer is 0.055508435061792.
We assume you are converting between moles H2O and gram.
You can view more details on each measurement unit:
molecular weight of H2O or grams
This compound is also known as Water or Dihydrogen Monoxide.
The SI base unit for amount of substance is the mole.
1 mole is equal to 1 moles H2O, or 18.01528 grams.
Explanation:
The mass of 4.0 moles of water is 72 grams.
Explanation:
Moles of the substance is equal to the ratio of the mass of substance to the molar mass of the substance:[tex]Moles=\frac{\text{mass of substance}}{\text{molar mass of substance}}[/tex]
Given:
The 4.0 moles of water
To find:
Mass of moles of water
Solution:
The moles of water = 4.0 moles
The mass of water = M
The molar mass of water = 18.01528 g/mol
[tex]4.0=\frac{m}{ 18.01528 g/mol}\\m=4.0\times 18.01528 g/mol\\=72.06112 g\approx 72 g[/tex]
The mass of 4.0 moles of water is 72 grams.
Learn more about moles of substance here:
brainly.com/question/2293005?referrer=searchResults
brainly.com/question/4160077?referrer=searchResults
