[tex]1.44\times 10^{-2}[/tex]
Explanation:
We need to find the value of [tex]3.49\times 10^{-3}+1.1\times 10^{-2}[/tex].
Here,
The first number is [tex]3.49\times 10^{-3}[/tex]
The second number is [tex]1.1\times 10^{-2}[/tex]
To add these numbers as follows :
[tex]3.49\times 10^{-3}+1.1\times 10^{-2}=0.01449\\\\=1.44\times 10^{-2}[/tex]
So, the value of [tex]3.49\times 10^{-3}+1.1\times 10^{-2}[/tex] is [tex]1.44\times 10^{-2}[/tex]
I’m having trouble with this assignment please help.
Q = m.c.AT
m = 50,0 g of iron
c = 0.450 J.g-1°C-1
AT = 10°C
Thus
Q = 50 * 0.450 * 10
Q = 225 J
Is the heat energy
Hope it helps xx
Which rule determines the charge on a monatomic ion formed from a nonmetal? group number ÷ 8 8 × group number 8−groupnumber groupnumber−8
Answer:
Group number – 8
Explanation:
To determine the charge on the ion formed by various elements, we simply consider their valence electrons.
However, this is only applicable to elements in group 1, 2 and 3 only.
To determine the charge on the ions formed by non metals i.e elements in group 4, 5, 6, 7 and 8(group 0) we simply subtract 8 from the group number i.e group number – 8
This can be further explained as follow:
Chlorine belong to group 7 because it has 7 valence electrons.
The charge on the chloride ion can be obtained as follow:
Group number = 7
Charge on ion =?
Charge on ion = Group number – 8
Charge on ion = 7 – 8
Charge on ion = – 1
Therefore, the charge on chloride ion is – 1.
Answer in the correct significant figures: 35.6 + 56.27 *
Answer:
101.87
Explanation:
that's the answer
In science class, Jake mixed water with differing amounts of an unknown liquid. After mixing the liquids, he heated 20 milliliters (ml) of each mixture and observed how quickly it boiled. The table shows his results.
According to the question, each mixture decrease the boiling point of the water.
What is boiling point ?Boiling temperature is defined as the temperature at which liquid change into a vapour at the atmospheric pressure at sea or ocean level.
For example the boiling temperature of water is 100 degree celcius.
Thus, each mixture decrease the boiling point of the water, option "A" is correct.
To learn more about boiling point click here:
https://brainly.com/question/2153588
#SPJ2
One day, you decide to pop some popcorn. You put the bag in the microwave, but after a couple of minutes of cooking it is clear the popcorn is not popping. Why did this happen? What steps could you take to help locate the problem?
What is the lowest value of n that allows g orbital to exit
Match the set of measurements of the boiling point of water with the best
description.
Measurements
Description
6. 103 °C, 90 °C, 101 °C
a.
Precise
7. 100 °C, 99 °C, 100 °C
b.
Accurate
8. 105 °C, 106 °C, 105 °C
c. Both accurate and precise
9. 99 °C, 101 °C, 100 °C
d. Neither accurate nor precise
Answer:
Matching
6.D
7.A
8.C
9.B
Explanation:
Took test
103 °C, 90 °C, 101 °C Neither accurate nor precise, 100 °C, 99 °C, 100 °C are Precise, 105 °C, 106 °C, 105 °C are Both accurate and precise, 99 °C, 101 °C, 100 °C are Accurate. These are the correct set of measurements of the boiling point of water.
what are boiling point and melting point ?The melting point is defined as the temperature at which solid and liquid phases are at equilibrium state, whereas the boiling point is defined as the temperature at which the pressure of a vapor of a liquid is equal to the external pressure.
Melting point in which the melting of solid occur to become a liquid at a given temperature, here the molecules gain enough amount of kinetic energy to get the intermolecular forces to convert into another form.
In case of Boiling point the liquid phase enters into the gaseous phase, when the external pressure is high than a temperature for the vapor pressure equal to the external pressure.
Learn more about boiling point, here:
brainly.com/question/28203474
#SPJ2
PLS HELP ASAP 15 POINTS TYSM which of the following is a consequence of urban heat islands? a) increased precipitation downwind of the city b) increased winds within the city c) increased precipitation upwind of the city d) decreased winds within the city
Answer:
Hey!
Your answer is definitely A!
Explanation:
Hope this helps!
:>
In an ecosystem, the following is a consequence of urban heat islands which is increased precipitation downwind of the city.
What is an ecosystem?Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.
Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.
Learn more about ecosystem,here:
https://brainly.com/question/1673533
#SPJ2
Increasing temperature can
The primary function of a scuba regulator is to: Reduce high-pressure gas in the scuba cylinder to a more breathable intermediate pressure. Reduce high-pressure gas in the scuba cylinder to ambient (surrounding) pressure. Provide a diver with a continuous flow of oxygenated air. None of the above.
Answer:
Reduce high-pressure gas in the scuba cylinder to ambient (surrounding) pressure.
Explanation:
The primary function of a scuba regulator would be to reduce high-pressure gas in the scuba cylinder to ambient pressure.
A scuba regulator is a structure found attached to the scuba cylinder usually carried by scuba divers. The structure regulates the pressure of the breathing gas in the cylinder to a safe level before the gas becomes available for the breathing process of divers.
Usually, the gas in a scuba cylinder is at a high level. Hence, what the regulator does is to bring it down to a level that would be safe for the breathing of the diver.
How many grams of silver will be produced if 86g of copper are used
Abigail obtained 18.9 grams of calcium carbonate after performing a reaction. From her calculations, she knew she should have obtained 9.9 grams. What was her percent error? Round your answer to one place behind the decimal. Do not include the unit.
Answer:Percent error= 90.9%
Explanation:
Percent error or percentage error is defined as the percentage of the difference between a measured value usually from an experiment and an exact value in comparison to the exact number.
its formula is thus
Percent error = experimental value - exact or actual value /exact value x 100
=(18.9 - 9.9 /9.9 ) x 100= 9/9.9) x 100
0.909 x 100 = 90.90 = 90.9%
Which of these is true about electrons? posses a positive electrical charge of one (+1) have a negative electrical charge of one (-1) indicates the number of protons in each atom equals the sum of protons plus neutrons in each atom
Answer:
have a negative electrical charge of one (-1)
Explanatio
Electrons have an electrical charge of negative one. When you think electron, always think -1
HELP PLEASE NAME THESE COMPOUNDS topic of amines and amides please explain you steps so i can do the rest of the problems myself
The attachment shows the diagram of two molecules respectively;
The first molecule in the attachment is known as triethylamine,The functional group is amine Which is - CONH2
And there is a methyl group as an attachment, attached at the third(3) carbon atom,making the compound triethyamine.
The second molecule in the attachment is an example of a secondary amide.
The longest carbon chain is five which pentanamide.
The functional group is amide.
The compoud is named by replacing the suffix - ane in pentane (alkane) to the suffix - amide.
Making the compound pentanamide.
(30 points) alright so there’s this girl I’m ab to slide in her dms I just need a pickup line but nothing inappropriate bc I don’t like to slide in thirsty so if anyone has a completely hydrated cute pickup line help a simp out
Answer:
Are you a fruit, because honeydew you know how beautiful you look right now?
or maybe
I hear you’re good at algebra…..Will you replace my eX without asking Y?
or maybe
On a scale of one to ten you’re a nine… Because I’m the one left that you need.
Explanation:
Hope these help you.
Give two examples of neutralization
Answer:examples for neutralization - treating indigestion,treatment for insect bites.hope it help you
Explanation:
. Fire can be extinguished by: - a. Lowering temperature below ignition temperature b. Cutting the supply of oxygen c. Removing non-combustible substances from surroundings d. Both a & b
Answer:
B. Cutting the supplies of oxygen
A 12.6 g block of a metal intially at a temperature of 94.0 °C is added to a 100.0 g sample of water intially at 21.0 °C. If the final temperature of the water is 25.1 °C, determine the specific heat of the metal. Write all equations or formulas you use, and show as much of your work as you can.
Answer:
The specific heat of the metal is 0.0482 joules per gram-Celsius.
Explanation:
Block of metal is cooled by adding water and thermal equilibrium is reached. According to the First Law of Thermodynamics and by supposing the absence of energy and mass interaction of the system with surroundings, the change in the energy of the system is represented by:
[tex]\Delta U_{m} + \Delta U_{w} = 0[/tex]
Where [tex]\Delta U_{m}[/tex] and [tex]\Delta U_{w}[/tex] are the changes in internal energies of the block of metal and water, measured in joules.
The expression described above is now extended by applying the definition of internal energy for constant mass systems:
[tex]m_{m}\cdot c_{v,m}\cdot (T_{m,in}-T_{m,out}) + m_{w}\cdot c_{v,w}\cdot (T_{w,in}-T_{w,out})= 0[/tex]
Where:
[tex]m_{m}[/tex], [tex]m_{w}[/tex] - Masses of the block of metal and water, measured in grams.
[tex]c_{v,m}[/tex], [tex]c_{v,w}[/tex] - Specific heats of the block of metal and water, measured in joules per gram-Celsius.
[tex]T_{in, m}[/tex], [tex]T_{in, w}[/tex] - Initial temperatures of the block of metal and water, measured in Celsius.
[tex]T_{out, m}[/tex], [tex]T_{out, w}[/tex] - Final temperatures of the block of metal and water, measured in Celsius.
The specific heat of the metal is cleared in the equation:
[tex]c_{v,m} = -\frac{m_{w}\cdot c_{v,w} (T_{w,in}-T_{w,out})}{m_{m}\cdot (T_{m,in}-T_{m,out})}[/tex]
If [tex]m_{m} = 12.6\,g[/tex], [tex]m_{w} = 100\,g[/tex], [tex]c_{v,w} = 4,186\,\frac{J}{kg\cdot ^{\circ}C}[/tex], [tex]T_{w,in} = 21\,^{\circ}C[/tex], [tex]T_{m,in} = 94\,^{\circ}C[/tex] and [tex]T_{m,out} = T_{w,out} = 25.1\,^{\circ}C[/tex], the specific heat of the metal is:
[tex]c_{v,m} = -\frac{(100\,g)\cdot \left(4,186\,\frac{J}{g\cdot ^{\circ}C} \right)\cdot (25\,^{\circ}C-25.1\,^{\circ}C)}{(12.6\,g)\cdot (94\,^{\circ}C-25.1\,^{\circ}C)}[/tex]
[tex]c_{v,m} = 0.0482\,\frac{J}{kg\cdot ^{\circ}C}[/tex]
The specific heat of the metal is 0.0482 joules per gram-Celsius.
A white rhinoceros weighs about 1,500 pounds (lb). How many tons (T) does the rhinoceros weigh? (1 T =
A. 1.5 T
o
B. 1 T
C. 0.75 T
D. 0.5 T
Answer:
C
Explanation:
1 lb is 0.0005 T. So if you can do the math, (1500x.0005) it comes out to 0.75 T.
Which is one way scientist communicate the results of an experiment?
Answer:
By writing an experiment report
Explanation:
when an atom gains an electron,what charge does the ion have
Answer:
if an atom gains an electron, the ion has negetive charge
In ∆ABC, if sin A = and tan A = , then what is cos A?
Complete Question:
In ∆ABC, if sin A = 4/5 and tan A = 4/3, then what is cos A?
Answer:
[tex]cos A= \frac{3}{5}[/tex]
Explanation:
Given
[tex]sin A = 4/5[/tex]
[tex]tan A = 4/3[/tex]
Required
[tex]cos A[/tex]
In trigonometry;
[tex]tanA = \frac{sinA}{cosA}[/tex]
Multiply both sides by cosA
[tex]cos A * tanA = \frac{sinA}{cosA} * cos A[/tex]
[tex]cos A * tanA = sinA[/tex]
Divide both sides by tanA
[tex]\frac{cos A * tanA}{tanA} = \frac{sinA}{tanA}[/tex]
[tex]cos A= \frac{sinA}{tanA}[/tex]
Substitute values for sinA and tanA
[tex]cos A= \frac{4/5}{4/3}[/tex]
[tex]cos A= \frac{4}{5} / \frac{4}{3}[/tex]
[tex]cos A= \frac{4}{5} * \frac{3}{4}[/tex]
[tex]cos A= \frac{4 * 3}{5 * 4}[/tex]
[tex]cos A= \frac{3}{5}[/tex]
If you run a particular reaction, and in theory it was supposed to yield 50.0 grams of product, and the percent yield is 75%, how many grams did you actually end up with?
Answer:
37.5 grams
Explanation:
The percent yield shows how much of the reactant have been converted to product. The percent yield is the ratio of actual yield to theoretical yield multiplied by 100%. It is given by the formula:
%yield = Actual yield/ theoretical yield × 100%
Given that theoretical yield = 50 grams and the percent yield is 75%.
Using the formula and substituting:
75% = Actual yield/ 50 g × 100%
75% / 100% = Actual yield / 50 g
0.75 = Actual yield / 50 g
Actual yield = 0.75 × 50 g
Actual yield = 37.5 grams
explain using diagrams how potassium forms the compound potassium flouride when it reacts with flourine
Answer:
The answer to your question is given below.
Explanation:
Potassium (K) has 19 electrons with electronic configuration of 2, 8, 8, 1.
Fluorine (F) has 9 electrons with electronic configuration of 2, 7.
Fluorine needs 1 electron to complete it's octet configuration.
Hence, potassium (K), will lose 1 electron to fluorine (F) to form potassium ion (K+) with electronic configuration of 2, 8, 8. The fluorine atom (F) will receive the 1 electron from potassium to form the fluoride ion (F-) with electronic configuration of 2, 8.
**** Please see attached photo for further details.
A 0.477 mol sample of O_2 gas has a volume of 11.3 L at a certain temperature and pressure. If all this O_2 were converted to ozone (O_3) at the same temperature and pressure, what is the ozone volume (in liters)? 3 O_2(g) → 2 O_3(g)
Answer:
The volume of ozone produced is 7.53 L.
Explanation:
The reaction is:
3O₂(g) → 2O₃(g) (1)
0.477 mol V=?
11.3 L
From the reaction (1) we have that 3 moles of O₂ produce 2 moles of O₃ so the volume of the ozone produced can be calculated as follows:
[tex] V_{O_{3}} = V_{O_{2}}*\frac{n_{O_{3}}}{n_{O_{2}}} = 11.3 L*\frac{2}{3} = 7.53 L [/tex]
Therefore, the volume of ozone produced is 7.53 L.
I hope it helps you!
The ozone volume (in liters) is 7.53 L.
The calculation is as follows:
The volume of the ozone in liters should be
[tex]= 11.3 \times 2\div 3[/tex]
= 7.53L
we have that 3 moles of O₂ produce 2 moles of O₃
Learn more: https://brainly.com/question/17961582?referrer=searchResults
In 1838 botanist Matthias Schleiden determined that all plants are composed of cells. In 1839, anatomist Theodor Schwann proposed that all animals are composed of cells. In 1855, biologist Rudolph Virchow added to Schleiden's and Schwann's observations and proposed that all living things are composed of cells. Which statement is also part of Virchow's cell theory?
Answer:
cells arose from preexisting cells
Explanation:
Rudolph Virchow is a German biologist that built on the work of other scientists such as Theodor Schwan to contribute his own quota to the development of the cell theory as it is currently known.
After several studies, Virchow rejected the idea of spontaneous generation and accepted the initially rejected idea of cell division. He earlier believed that cell division only takes place is some special type of cells and not in all cells.
Even though Virchow was not the first to bring the idea of cells arising from preexisting cells, he was the one that popularized the idea and added it to the earlier belief that all living organisms are made up of cells.
Answer:
B
Explanation:
According to Dalton, the pressure of a mix of gases in a single container is the sum of all of the pressures of the individual gases: Ptotal = Pa + Pb + … If a 20.0L container at 30°C has 3.4 atm of methane and 1.68 atm of ethane, what is the total pressure of the container?
Answer:
The correct answer is 5.08 atm
Explanation:
This question tests our knowledge of the Dalton's law of partial pressures which is stated in the question; that the pressure of a mixture of non-reacting gases in a single container is the sum of all the pressures of the individual gases.
It can hence be represented mathematically as Ptotal = Pa + Pb + ...
Ptotal = pressure of methane + pressure of ethane
Ptotal = 3.4 atm + 1.68 atm
Ptotal = 5.08 atm
Anna is excited about conducting her lab today. She takes out her lab sheet and reads over the lab. She goes and gathers all of the lab materials. She follows each lab procedure step-by-step until she has completed the procedure and recorded all of the data she collected. Afterwards, Anna takes two of the substances and mixes them together to see what would happen. Which lab safety rule did Anna break?
Answer:
Anna didn't wear a lab coat
Explanation:
The first thing anyone who is to carry out a procedure or an experiment in a lab needs to do when he/she enters a lab is to wear a lab coat. This is a lab safety rule that protects the individual from been affected by spillage that could occur as a result of the experiment been conducted.
From the narration in the question, it is not stated anywhere that Anna wore a lab coat before embarking on her lab procedure.
Answer:
C, wear goggles, anytime chemicals, heat, or glassware are used.
Explanation:
This is the correct answer on the Lincoln learning platform.
The substances are placed in separate containers at room temperature, and each container is gradually cooled. Which of these substances will solidify before the temperature reaches 0°C? benzene water butane nitrogen
Answer:
Benzene
Explanation:
You have to find the freezing point for each of these (make sure they're in Celsius). You might want to double check these but:
Benzene: 5.5
Water: 0
Butane: -138
Nitrogen: -210
The substances that will solidify before the temperature reaches 0°C is benzene. The correct option is A.
What is freezing point?Freezing, also known as solidification, is a phase transition that occurs when the temperature of a liquid falls below its freezing point.
If the intermolecular forces between its molecules are strong, the freezing point is high.
When the forces are weak, the freezing point is low. The freezing point of a liquid or the melting point of a solid occurs when the solid and liquid phases are in equilibrium.
Pure benzene has a freezing point of 5.48 degrees Celsius. Because of the salt in it, fresh water freezes at 32 degrees Fahrenheit, but seawater freezes at around 28.4 degrees Fahrenheit.
Thus, as per the given scenario, the correct option is A.
For more details regarding freezing, visit:
https://brainly.com/question/3121416
#SPJ2
the mass of empty cylinder is 20 gram its mass when its filled completely with water is 30 gram and its mass when its filled completely with unknown liquid is 27 gram find the density of, the unknown liquid
Answer:
≈ 0.70 g/cm³ (answer rounded up to 2 decimal places)
Explanation:
The mass of empty cylinder is 20g
The mass of water filling the cylinder = 30g - 20g = 10g
The mass of unknown liquid filling the cylinder = 27g - 20g = 7g
Density of water = 997 kg/m³
Converting this density to g/cm³ we get;
1kg = 1000g , 1m³ = 1000000cm³
So density = [tex]\frac{997000}{1000000}[/tex] g/cm³ = 0.997 g/cm³
So the volume of water occupied by 10g is;
10 × 0.997 = 9.97 cm³
This volume is also occupied by 7g of the unknown liquid.
Density = mass/volume
Density of the unknown liquid = 7g ÷ 9.97cm³ = 0.702106319 g/cm³ ≈ 0.70 g/cm³ (answer rounded up to 2 decimal places)
