Answers
Related Questions
A student measured the volume of three rocks. The diagram above shows the
results of her investigation. Which correctly orders the rocks from least to
greatest?
A. Rock A, Rock B, Rock C
B. Rock C, Rock A, Rock B
C. Rock B, Rock C, Rock A
D. Rock A, Rock C, Rock B
Answers
Answer:
option B is right
...............
Answer: A C B
Explanation:
If you look closely the water levels show which is bigger fun fact.
Determine What is the efficiency of a machine whose work output is 4 joules, and whose work input is 10 joules?
Answers
Answer:
The efficiency of the machine is 40 %.
Explanation:
We have,
Output work by the machine is 4 joules and the input work is 10 joules.
It is required to find the efficiency of a machine. The efficiency of a machine is given by the ratio of output work to the input work. It is given as :
[tex]\eta=\dfrac{4}{10}\times 100\\\\\eta=40\%[/tex]
So, the efficiency of the machine is 40 %.
An isotope releases radiation in order to ____________ its nucleus.
stabilize
destroy
Answers
Answer:
stabilize
I think this should be the answer...
Answer stabilize
Explanation: hope it’s right
Please help! I'll mark you as branliest!!! :)
Answers
Answer:
pretty sure its C, Radiation because the sun produces radiation
Explanation:
Answer: conduction
Explanation:
The sand is directly transferring heat to the people. They are touching, so it would be an example of conduction.
In a “minute to win it” game, cards are placed between cups to stack them. The contestant then pulls the card out in hopes that they will end with a set of stacked cups. Why does this work?
There is no friction between the card and the cup.
Inertia will keep the top cup from moving very far. Gravity will pull one cup on top of another.
The opening of the cup is so much bigger than the bottom, even though the cup moves they will both be stacked together.
Both cups are moved the same amount by the friction between them and the card.
Answers
Answer:
There is no friction between the card and the cup.
Explanation:
Answer:
The answer option to your question is A) - There is no friction between the card and the cup.
An object has an acceleration of 18.0 m/s/s. If the net force was doubled and the mass were tripled then the new acceleration would be
Answers
Answer:
12.0 m/s²
Explanation:
Newton's second law:
F = ma
Solving for acceleration:
a = F/m
If force is doubled and mass is tripled:
a' = (2F)/(3m)
a' = ⅔ (F/m)
a' = ⅔ (18.0 m/s²)
a' = 12.0 m/s²
The new value of acceleration of object is 12 m/s².
Given data:
The magnitude of acceleration of object is, [tex]a =18 \;\rm m/s^{2}[/tex].
Let F be initial net force and m be the initial mass. Then as per the problem, the new values of each are,
F' = 2F
m' = 3m
Apply the Newton's Second law, which says that the product of mass and acceleration of object given net force. Then,
F = ma
F = m(18)
F/m = 18 .................................................(1)
Now, for new value of net force,
F' = m'a'
2F = (3m) a'
2F/3m = a'
a' =2/3× (18) (From equation 1)
a' = 12 m/s²
Thus, we can conclude that the new value of acceleration of object is 12 m/s².
Learn more about the Newton's second law here:
https://brainly.com/question/19860811
a force of 20 N acted on a ball thereby imparting an impulse of 70 Ns to the ball. For how long did the force act on the ball?
Answers
Answer:3.5 seconds
Explanation:
What can happen if the excretory system doesn't work properly ?
Answers
During which two phases would surfer’s most likely benefit
A. New and Full Moon
B. New moon and Waxing Crescent
C. Full Moon and Waxing Gibbous
D. 1st Quarter and 3rd Quarter
Answers
The phases where surfer’s most likely benefit include D. 1st Quarter and 3rd Quarter.
Surfers will benefit include during the 1st Quarter and 3rd Quarter because there's tidal change. Tidal change is when coastal areas experience two low and high tides.
The benefit of surfing during this period is that it helps jack the waves. Waves transmit energy and this is important to surfers.
Read related link on:
https://brainly.com/question/18253248
Which term is defined as the force applied to the object divided by the mass of the object?
speed
velocity
mass
acceleration
Answers
Answer:
acceleration
Explanation:
From the question: "FORCE... divided by the MASS..." is translated to a math equation as "F / m", where "F" is the force and "m" is the mass.
Now, the second Newton's law says "F = m . a ", where a is acceleration.
If you move m to the left side, clearly you have "F / m", and "a" is alone to the right. Math equation:
a = F / m
acceleration = force / mass
Balance chemical reactions: please help question attached
Answers
hope this helps!
Due very soon! 100 points please answer for all three diagrams!
The woman supports a 100 N load with the friction free pulley system shown below. Fill in the spring scale readings that show how much force she must exert.
Answers
Answer:
1. 100N 2. 50N 3. 50N
Explanation:
The spring scale reading that shows how much force she must exert is 1. 100N 2. 50N 3. 50N.
What is the spring scale?A simple and affordable way to determine mass is by using spring balances. The mass is suspended from the end of the spring, and the spring's deflection as a result of the mass's downward gravitational pull is measured in relation to a scale.
The word "force" has a specific meaning in science. At this level, calling a force a push or a pull is entirely appropriate. A force is not something an object "has in it" or that it "contains."
One thing experiences a force from another. There are both living things and non-living objects in the concept of a force.
Therefore, her required force is indicated by the spring scale readings of 1. 100N, 2. 50N, and 3. 50N.
To learn more about spring scale, refer to the link:
https://brainly.com/question/13949751
#SPJ2
Which is a true statement?
A.
Valence electrons play a key role in chemical reactions.
B.
The properties of elements in a group are identical.
C.
Hydrogen contains multiple valence electrons.
Answers
Answer:
C
Explanation:
the magnification priduced by a spherical mirror is +1/4.what type of image is formed?
Answers
Explanation:
As the magnification is positive , thus the image formed is inverted and real
if 34.7 g of O2 reacts with iron to form 79.34 g of iron oxide, how much iron was used in the reaction?
A.
19.84 g
B.
44.64 g
C.
104.1 g
D.
114.04 g
Answers
Answer: B. 44.64 g
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.
Mass of reactants = mass of iron + mass of oxygen = mass of iron + 34.7 g
Mass of product = mass of iron oxide = 79.34 g
As Mass of reactants = Mass of product
mass of iron + 34.7 g = 79.34 g
mass of iron = 44.64 g
Thus 44.64 g of iron was used in the reaction
A few Physics questions regarding circuits and electricity.
Answers
Answer:
7.series
Explanation:
in parallel is like if one bulb stops work all the others will stop too
in series it remains constant or it wont change throughout a series circuit
A light beam approaches a plain mirror at an incident angle of 39
degrees. What is the angle of reflection?
Answers
Convection currents not only in the Earth's core but in what?
A. Only liquids
B. When a dense substance is warmer than a less dense substance
C. In both liquids and gases
D. Weakly in solids
Answers
Answer:
B. When a dense substance is warmer than a less dense substance
Explanation:
Suppose that you, with a mass of 48kg, is standing on frictionless roller skates when someone throws you a 2.50kg mass with a velocity of 15m/s and you catch it. What will be your resultant velocity?
Answers
Answer:
v = 0.74 m / s
Explanation:
We can solve this exercise using the conservation of the moment
initial instant. Before the crash
p₀ = m v
where m is 2.50 kg and its velocity v₀ = 15 m / s
final moment. After catching the dough
[tex]p_{f}[/tex] = (m + M) v
As the system is made up of the mass and the person, all the forces during the impact are internal, therefore the moment is conserved
p₀ = p_{f}
m v₀ = (m + M) v
v = m / (m + M) v₀
we calculate
v = 2.5 / (2.5 + 48) 15
v = 0.74 m / s
ASAP if you answer right I will mark brainiest
Answers
Answer:
I'm glad you asked!
Explanation:
1.Venus is the hottest planet in the solar system.
2.Opportunity explored Mars' surface.
3.Earth is the only planet in the solar system known to have plate Tectonics.
4.Mercury is one of the four planets closest to the Sun.
5.Mercury is the smallest of all planets in the solar system.
6.Messenger is a space aircraft that orbits and studies Mars.
7.Venus has the largest volcano in the solar system.
For any energy source including batteries, there will be conduction of electricity if there is a potential
difference
similarity
Answers
Answer:
Difference
Explanation:
The electricity conduction happens when there is a flow of current. The flow of current from one point to another can only occur if there is a potential difference.
If there is not potential difference between two points the current will not flow and thus electricity conduction will also be not possible. The current in the circuit will flow from higher potential point to lower potential point.
A wave that is traveling toward an interface is called the...??
Answers
Answer:
Surface wave
Eg ocean wave
In a series circuit, electrons only flow along one path. Given this information, which of the following is an advantage of series circuits?
A.
The voltage is the same everywhere in a series circuit.
B.
Less resistance is produced as more devices are added to the circuit.
C.
Series circuits are simpler than parallel circuits.
D.
If one part of the circuit breaks, the other parts will still be able to operate.
Answers
Answer:
C. Series circuits are simpler than parallel circuits.
Explanation:
In series circuit, all the components are connected in single path of current flow. If one part of the circuit breaks, the whole thing would break and none of the other parts would work. The voltage is not the same everywhere. It is different across each component. In series circuit, net resistance is more as resistance of all the components connected in series are added up. So, the only advantage of a series circuit is that is simpler than the parallel circuits.
Science question!! Please help
Answers
Answer:
It lasted two hours or 120 minutes, it would be smart to say that he was riding up it during the interval 20-60min and riding down it during the interval 60-80min. This is an assumption made because of his speed, when going up a hill our speed is slower while when riding down it, you gain a lot of speed.
does space have plenty of oxygen
Answers
Answer:
I don't think so because we can't breathe in space
Explanation:
Answer:
No
Explanation:
There is no oxygen in space, so astronauts must bring tanks of oxygen
_ is (are) the type of electromagnetic wave(s) with a wave length between 700 and 400 billionths of a meter.
Answers
Answer:
Visible Spectrum is the type of electromagnetic wave with a wave length between 700 and 400 billionths of a meter.
A Physics question regarding circuits and electricity.
Answers
Hope this helps! :)
Which of the following is a homogenous mixture?
Answers
Answer:
Blood
Explanation:
Homogenous means the same type and a box with toys, spaghetti and meatballs, and trail mix all have variety.
Answer:
B is the correct answer
Please have a look at the image
Answers
Answer:
a
Explanation:
a. zero is the answer...
This graph provides data on the amount of water needed to grow four different crops, each used to produce ethanol, a fuel. For each crop, the data shows how many liters of water are needed to produce one liter of ethanol fuel. Which of the following would require using the most water? *
Producing 100 L of ethanol from sugar cane
Producing 200 L of ethanol from sugar beet
Producing 300 L of ethanol from potatoes
Producing 400 L of ethanol from corn
Answers
Answer:
Producing 300 L of ethanol from potatoes
Explanation:
From the diagram, one liter of ethanol production from sugar cane requires 2000 liters of water. Hence, in order to produce 100 L of ethanol from sugar cane, 2000 x 100 = 200,000 L of water.
1000 liters of water is needed to produce 1 liter of ethanol from sugar beet. Hence, 200 x 1000 = 200,000 L of water will be needed to produce 200 liters of ethanol.
1000 liters of water is also required to produce 1 liter of ethanol from potatoes, hence, 300 x 1000 = 300,000 L of water would be required to produce 300 L of ethanol from the same material
About 500 liters of water is required to produce 1 liter of ethanol from corn, hence, 400 x 500 = 200,000 L of water would be needed to produce 400 L of ethanol from corn.
In conclusion, producing 300 L of ethanol from potatoes would require using the most water among all the options.
