Molality = moles of solute/mass (in kg) of solvent
The solute here is NaCl, of which you have 40 g or 40/58.4428 = 0.6844 moles NaCl.
The solvent here is water, of which you have 1500 g or 1.500 kg H2O.
The molality of the resulting solution would thus be 0.6844 moles NaCl/1.500 kg H2O = 0.4562 mol/kg.
If you have to consider sig figs, then your final answer would have one sig fig (40 g has one sig fig). In that case, your final answer would be 0.5 mol/kg.
click on the picture of the flowers until their colors correspond to the punnett square above. HELP PLZ!
Answer:
You will need to have a red flower in the top left, a pink flower in the top right and bottom left, and a white flower in the bottom right.
Explanation:
This flower appears to express color through codominance, which means that both genes express themselves. "R" is the dominant gene for red, and "r" is the recessive gene for white. When a flower has RR genotype, the phenotype will be a red flower. When a flower has an Rr genotype, the red and white genes will both be expressed and the phenotype will be pink. When a flower has an rr genotype, it lacks the red gene and will therefore be only white.
What is the empirical formula a for a compound that is 15.3% magnesium, 44.5% chlorine, and 40.2 % oxygen
Answer:
[tex]MgCl_{2} O_{4}[/tex]
Explanation:
When calculating an empirical formula from percentages, assume you have a 100g sample. This allows you to convert the percentages directly to grams, because X % of 100g is X grams.
So:
15.3 % = 15.3g Mg, 44.5% = 44.5g Cl, 40.2% = 40.2g O
The next step is to divide each mass by their molar mass to convert your grams to moles.
15.3/24.3 = .630 mol
44.5/35.5 = 1.25 mol
40.2/16.0 = 2.5 mol
Then you will divide all of your mol values by the SMALLEST number of moles. This gives you whole numbers that are the mole ratio (subscripts) of the empirical formula.
.630 mol/.630mol = 1
1.25 mol/.630mol = 2
2.5 mol/.630mol = 4
So the empirical formula is
[tex]MgCl_{2} O_{4}[/tex]
There are 5 moles of N20 at STP. What is the density?
Answer:
5 mole of N2O : 112 litre of N2O
5 mole of N2O : 220 g of N2O
Then,
Density = mass/ volume
= 220/112
= 1.96 g per litre
How do the valency and the atomic size of the element vary while going from left to right along a period in The modern periodic table?
Answer:
Atomic size decreases on going along a period from left to right because the electron enters into the same shell, therefore, attraction between nucleus and outermost electron increases and thus atomic size decreases. Valency first increases from 1 to 4 and then decreases from 4 to GO along a period from left to right.
Answer:
kha gya vo chasmis ........
If 5 moles of sugar was added to a kilogram of water, the new boiling point would be _____ degrees C.
Write your answer to the nearest hundredth.
Answer: 102.56
Explanation: I just took the K12 test and this is my answer.
1 and 2 answer choice help please?
Answer:
I think its b be ause it looks like a better answer and it has some detail to it
Which statement is true about solids?
Their particles can flow over one another, so they have a fixed volume but no fixed shape.
Their motionless particles are packed together in a fixed arrangement.
Their vibrating particles are packed together in relatively fixed positions.
Their fast-moving particles can expand to take the shape of their container.
Answer:
3
Explanation:
Answer:
Their vibrating particles are packed together in relatively fixed positions.
Explanation:
As you can see in the image below, solid is packed together.
What is the application of flotation
Answer:
The law of floatation is applied in all vessels which travel by waterways that include ships, submarines and ferry boats. It is also applied in some vessels which travel by air ways such as hot air balloon and air ship. Balloons of different colors and shapes are filled with lighter gas so that will float in air.
Answer:
*hot air balloon
*swimming
Explanation:
sna makatulong po:)
During photosynthesis, plants change light energy into:
chemical energy
solar energy
mechanical energy
electrical energy
i will mark brainlest
Answer:
chemical energy
Explanation:
just put that
Answer:
chemical energy
Explanation:
it is the light dependent reaction
Which organ detects stimuli from the environment and is part of the nervous system?
Group of answer choices
A. eye
B. stomach
C. heart
D. lungs
It's the eye because it's the organ of sight
Please help this is due soon and I’ll mark you brainiest if you can help
Answer:
I think it's either A or D I'm not sure hope that I helped you.
In the atmosphere, it is more common to find two oxygen molecules joined together than to find a single atom of oxygen. Why? What would that molecule look like? What would this molecule be called?
Answer:
See explanation
Explanation:
Oxygen has six electrons in its outermost shell. This means that its octet can be completed when it shares two electrons with another oxygen atom.
In a covalent bond, each bonding atom contributes one electron to the bond. This means that four electrons are shared between two oxygen atoms. Each atom contributes a total of two electrons which are shared. This molecule of oxygen satisfies the octet rule rather than a single atom of oxygen.
An image of the oxygen molecule is attached to this answer.
This system of two oxygen atoms joined together in a covalent bond is called an oxygen molecule(O2).
A tank contains helium gas at 585 mmHg, nitrogen gas at 0.76 atm, and neon at 940 torr. What is the total pressure
Answer:
2.77 atm
Explanation:
The total pressure of a mixture of gases is calculated as the addition of the partial pressures of the gases. In this case, the total pressure (Pt) is calculated from the partial pressures of helium (PHe), nitrogen (PN₂) and neon (PNe):
Pt = PHe + PN₂ + PNe
First, we have to convert the partial pressures to the same unit (atm). For this, we have to know that 1 atm=760 mmHg=760 Torr
PHe = 585 mmHg x 1 atm/760 mmHg = 0.77 atm
PN₂= 0.76 atm
PNe= 940 Torr x 1 atm/760 Torr = 1.24 atm
Finally, we calculate the total pressure in atm:
Pt = 0.77 atm + 0.76 atm + 1.24 atm= 2.77 atm
Explain why the temperature of the water decreased when the cold water was added to the hot water
Answer:
The water is clearly close to boiling temperature when you add the ice. So, initially the ice cools the water that is near it to near 0degC. Water between about 0 and 8 degrees is more dense than hotter water, so the cold water sinks to the bottom.Jun 14, 2020
Hope this helps if so don't hesitate to 'Thanks' and/or 'brainliest' this answer!
Answer:
hot water has more melting point
Explanation:
hot water has more melting point
hot water cpyld be boiled
Plz answer question! Due in 7 minutes!!! Will make BRAINLIEST for first correct answer!!!
Consider the following reaction occurring in a 1.0 L container:
H2 (g) + I2 (g) → 2 HI (g)
State 2 requirements for a successful collision between H2 and I2.
Answer:
jjjjajwhejwhswjiwiwvssvwvow9qiwgdvdbslw
3. Describe the process behind how students recover an individual's remains from a surface grave.
Answer:
By using the techniques of archeology.
Explanation:
Students recover an individual's remains from a surface grave by using the techniques of archeology field to scrape away the layers of soil from that remains in a way that the remains can't be damaged. If they find the remains within 10 centimeters of digging, they can dig down further in order to dig out all the remains safely. The instruments of archeology field are used because they are light and can be used to dig out fossils of ancient organisms.
How are plate tectonics and the rock cycle connected
Answer:
All igneous rocks the basis of the rock cycle are formed by plate tectonics. ... The heat from the mantle that fuels plate tectonics causes both igneous and sedimentary rocks to be turned into metamorphic rocks. The metamorphic rocks can be eroded into sedimentary rocks are remelted back into igneous.
Explanation:
I’ll really appreciate it if you help me out with these 2 questions .
If some methane gas at 115 kPa and 33C is allowed to expand to 15.0dm^3 from 8.00 dm^3 when the temperature changed to 51.2 C. What pressure will the same amount of gas exert?
Answer:
228.4 kPa
Explanation:
From thw question,
PV/T = P'V'/T'..................... Equation 1
Where P = Inital pressure, T = Initial Temperature, V = Initial Volume, P' = fInal Pressure, V' = Final volume, T' = Final Temperature.
Make P' the subject of the equation
P' = PVT'/TV'...................... Equation 2
Given: P = 115 kPa, V = 15.0 dm³, T = 33°C = (33+273) K = 306 K, T' = 51.2°C = 51.2+273 = 324.2 K, V' = 8.00 dm³
Substitute these values into equation 2
P' = (115×15×324.2)/(306×8)
P' = 228.4 kPa.
help, please? What science law explains why there should always be the same type of elements on the reactant side as there are on the product side? What does this law state? (HINT: Answer both of these questions. A: The Law of _________________ states that _____________.)
Answer:
the law of conservation of energy states that energy neither created nor destroyed that means in a chemical reaction Mass reactants ( starting material)=tomass of produt
how do i break my leg
Answer:
why would u want 2?
Explain in the comments why.
Please help will mark brainliest!! What is the main point of paragraph 3?
Answer:
the highest frequency
Explanation:
How many grams of water should be added to 4.00 g NaOH to create 2.00% by mass NaOH solution?
Answer:
196 grams
because ^^^ was wrong and person in comments said it was 196 and it was right
When NaOH of 4.00 g is being added with water, the mass of water required to create 2.00% of NaOH solution by mass is 196 g.
What is mass percent of solute?It means that the particular amount of solute in terms of percentage is present in the solute.
Given the mass of the solute, NaOH is 4.00g
Suppose the mass of water required to add is x in g.
The mass percent of the solute is
[tex]\dfrac{2}{100} =\dfrac{4.00}{4.00 +x }[/tex]
x =196 g
Therefore, mass of water required to create 2.00% of NaOH solution by mass is 196 g.
Learn more about Mass percent of solute.
https://brainly.com/question/15136748
#SPJ2
Help quickly pleaaas
Answer:
chymotrypsin, cleaves peptide bonds selectively on the carboxylterminal side of the large hydrophobic amino acids such as tryptophan, tyrosine, phenylalanine, and methionine
Under certain conditions butane reacts with oxygen to form butanone which can be easily hydrogenated to butanol. Butene is easily made from butanol by elimination of water.
Explanation:
These are for the first too
Directions Identify the reactants and product in the following reaction.
4A1+302 → 2A1203
Why is it important to know characteristics that matter undergoes in chemistry? How can we analyze the relationships between chemical and physical changes and properties?
Extension Questions: What is the study of Chemistry? Who are some of the important people who have contributed to the field? How do regular Americans interact with Chemistry around them?
How can we understand the historical development of the Periodic Table and apply its predictive power?
Extension Questions: Describe different chemical principles and systems. How does the layout of the periodic table allow you predict other element's properties? Consider all types and groups of elements.
Why is it important to know and understand the historical development of atomic theory?
Extension Questions: How does the atom relate to the elements of the periodic table? What are your most common models and how do they relate to the current atomic model? What theories don’t hold true today if any?
How do atoms combine to form ionic, covalent, and metallic bonds?
How can we write and balance chemical equations using the law of conservation of mass?
Answer:
Chemistry is important because everything you do is chemistry! Even your body is made of chemicals. Chemical reactions occur when you breathe, eat, or just sit there reading. All matter is made of chemicals, so the importance of chemistry is that it's the study of everything.
Please help me with this homework
A tall plant (Tt) is crossed with a short plant (tt). What percent will be short?
Group of answer choices
75%
0%
100%
50%
25%
it should be 50/50 percent
so 50%
hopefully this is right !
What are the three major categories used to classify elements?
a Solids, liquids, gases
b Protons, neutrons, electrons
c Groups, periods, states
d Metals. non-metals, metalloids
Answer:
i think option no. " D " = " metals, non-metals, metalloids " is the correct answer.
hope this answer will help u.
have a great time
