49. A block is pushed across a horizontal surface with a
coefficient of kinetic friction of 0.15 by applying a
150 N horizontal force.
(a) The block accelerates at the rate of 2.53 m/s2
Find the mass of the block.

(b) The block slides across a new surface while
experiencing the same applied force as before.
The block now moves with a constant speed.
What is the coefficient of kinetic friction between
the block and the new surface?

Answer:

Below

Explanation:

To solve for d rearrange the formula v = (d)(t) to:

  d = v / t

I'm not to sure if you are using different variables but usually in physics the formula for velocity is v = d / t not v = dt

If you wanted to solve for displacement you would do:

  d = (v)(t)

Hope this helps!

Answer:

This is because these metals are used for minting (making) coins.

Answer:

It is bcz it is used for making coins

Answer:

38500

Explanation:

I looked it up so it may be wrong

Let F₁ and F₂ denote the two forces, and R the resultant force.

F₁ and F₂ point perpendicularly to one another, so their dot product is

F₁ • F₂ = 0

We're given that one of these vectors, say F₁, makes an angle with R of 30°, so that

F₁ • R = ||F₁|| ||R|| cos(30°)

But we also have

F₁ • R = F₁ • (F₁ + F₂) = (F₁ • F₁) + (F₁ • F₂) = F₁ • F₁ = ||F₁||²

So, knowing that ||R|| = 100 N, we get that

(100 N) ||F₁|| cos(30°) = ||F₁||²

(100 N) cos(30°) = ||F₁||

||F₁|| ≈ 86.6 N

(And the same would be true for F₂.)

Answer:

Longshore drift has a very powerful influence on the shape and composition of the coastline. It changes the slopes of beaches and creates long, narrow shoals of land called spits, that extend out from shore. Longshore drift may also create or destroy entire “barrier islands” along a shoreline.

Answer:

low-energy alpha particles passing through a field of high mass-number-particles

Answer:

low-energy alpha particles passing through a field of high mass-number-particles

Explanation:

Answer:

yes water was discovered in mars

Momentum is conserved, so the sum of the momenta of the bullet and block before collision is equal to the momentum of the combined bullet-block system,

[tex]m_bv_b+m_wv_w = (m_b+m_w)v[/tex]

where v is the speed of the bullet-block system. The block starts at rest so it has no initial momentum, and solving for v gives

[tex]v = \dfrac{m_b}{m_b+m_w} v_b[/tex]

The total work W performed by the spring on the bullet-block system as it is compressed a distance x is

[tex]W = -\dfrac12kx^2[/tex]

where k is the spring constant, and the work done is negative because the restoring force of the spring opposes the bullet-block as it compresses the spring.

By the work-energy theorem, the total work done is equal to the change in the bullet-block's kinetic energy ∆K, so we have

[tex]W_{\rm total} = W = \Delta K[/tex]

The bullet-block starts moving with velocity v found earlier and comes to a stop as the spring slows it down, so we have

[tex]-\dfrac12kx^2 = -\dfrac12(m_b+m_w)v^2 \implies kx^2 = \dfrac{{m_b}^2}{m_b+m_w}{v_b}^2[/tex]

Solve for [tex]m_w[/tex]:

[tex]m_w=\dfrac1k\left(\dfrac{m_bv_b}x\right)^2-m_b[/tex]

[tex]m_w=\dfrac1{205\frac{\rm N}{\rm m}}\left(\dfrac{(0.0135\,\mathrm{kg})\left(245\frac{\rm m}{\rm s}\right)}{0.350\,\rm m}\right)^2-0.0135\,\mathrm{kg}\approx \boxed{0.422\,\mathrm{kg}}[/tex]

Answer

Resistivity R = K * L / A    where resistivity is constant for material, L the length of the material and A the area of the material

K = R * A / L     where R is the resistance of the material

The magnitude (size or numerical value) and the direction.

Hope this helps!!! :)

Answer:

No, it's not there.

Explanation:

For a machine to be 100% efficient, it has to be with an output which is equal to its input. But machines have an out put less than an input, hence efficiency below 100%.

Answer:

define 1 second time

One second is the time that elapses during 9,192,631,770 (9.192631770 x 10 9 ) cycles of the radiation produced by the transition between two levels of the cesium 133 atom. ... One second is equal to 1/86,400 of a mean solar day.

Answer:

One part of 86400 part of a day is called one second time.

✌✌✌✌

Answer:

42g

Explanation:

the mass of a body is given by

m=weight/gravity

=420/10

=42

I hope this helps

That's a parallel circuit. (B)

When current from Point-A reaches the 3-way intersection just to the right of Point-B, it has to make a choice:  Either turn left, go through B, and light the lower bulb, or go straight and light the upper bulb.

A circuit that has any "decision" points in it is a parallel circuit.  What happens in the real world is:  The current splits up.  Some of the current that reaches the intersection turns left toward Point-B, and the rest of it goes straight up.

A series circuit is one in which there's only one possible path all the way around.  There are no intersections of more than 2 roads, and no electron ever has to decide which way to flow.

An open circuit is one in which there's a break somewhere along the line and electrons can't jump across it.  It's like a railroad where a big piece is cut out of the track somewhere.  So no trains can travel on that route, and there's no current flowing anywhere in the circuit.

I'm not so sure about a "combination" circuit.  I guess you could give that name to a complicated circuit that has some series parts and some parallel-parts.  Personally, I'd call that a "series-parallel" circuit.  But it really doesn't matter right now.  Whatever the word means, the circuit in the picture is definitely not a "combination" circuit.

Answer:

B. Parallel Circuits

Explanation:

A parallel circuit is constructed by connecting the terminals of all the individual load devices so that the same value of voltage appears across each component. In a parallel circuit, charge divides up into separate branches such that there can be more current in one branch than there is in another.

hope i helped

Answer:

Solition given:

focal length(f)=20cm

size of image(v)=2x

size of object(u)=x

we have

power of lens= reciprocal to focal length=1/20=0.05/cm

ii.

the position of the image is beyond C.

Explanation:

See the attachment !!!!!!!

Answer:

120 Nm-1

Explanation:

Según la ley de Hooke;

F = Ke

F = fuerza sobre el resorte

K = constante de fuerza

e = extensión

Por eso;

K = F / e

K = 24N / 20 × 10 ^ -2m

K = 120 Nm-1

Answer:

But negative acceleration means that the rate of change of velocity is negative or velocity decreases. Example: (1) When we apply brakes in a moving car, then negative acceleration acts on it and the car stops. (2) When we throw a ball upwards, then also negative acceleration acts on it.

Explanation:

If it helps you mark me as a brainleast

MATHEMATICALLY A NEGATIVE ACCELERATION MEANS YOU WILL SUBTRACT FROM THE CURRENT VALUE OF THE VELOCITY.

Explanation:

p = F /A

F = P×A

F = 30,000 Pa / 0.1 m²

F = 300,000 N

Answer:

im pretty sure that it's (A.) High current

Explanation:

pf

not 100% sure, tho

Explanation:

the temperature will determine the kinetic energy or degree of freedom of the molecules of matter.

if the temperature is high, the kinetic energy of the molecules increase which may cause a change of state into a gas which has molecules of high kinetic energy. this shows that temperature is a measure of the kinetic energy of the molecules.

Answer:

b. the seasons

Explanation:

Answer:

The maximum current which can flow through a fuse without melting it, is called its rating. ... If current higher than 8 A flows through the fuse, it would melt and circuit gets broken. ... Hence, fuse acts as a safety device

Answer:

The guy above me is right

Explanation:

Answer:

D) crystalline solid that conducts current under certain conditions

Explanation:

A semiconductor is any crystalline solid material whose electrical conductivity is intermediary between that of insulators and conductors. That is, a semiconductor does not conduct like a conductor but does more than an insulator.

Based on this, a semiconductor is said to only conduct electricity under certain conditions as opposed to conductors that do so under any condition. Example of semiconductors are silicon, carbon, antimony, arsenic etc.

Answer:

Explanation:

The gravitational force between the earth and another body is F = -GM_em/r^2 r where G = 6.67 times 10^-11 Nm^2/kg^2 is the gravitational constant, M_e = 5.97 times 10^24 kg is the mass of the earth, m is the mass of the other body, and r is the position vector of the second body with respect to the centre of the earth.

Answer:

Obeying to weights & measurement regulations in both national and international metrology legislation, standards and test procedures is a requirement to participate in any market because it's aimed to safeguard the consumers and promote fair competition, which provides efficiency and saves unnecessary costs to U.S. businesses and stakeholders.

Explanation:

In the U.S., the National Institute of Standards and Technology (NIST) has an Office of Weights and Measures (OWM) that represents the country in the International Organization of Legal Metrology (OIML)

Answer:

that when two object interact, they apply forces to one another that are equal in magnitude and opposite in direction.

Explanation:

Newton's third law: the law of action and reaction

Answer:

Torque; τ = 4.712 × 10^(-3) J

Magnetic moment; M = 0.0248 J/T

Explanation:

Torque is gotten from the formula;

τ = BIA

Where;

B is magnetic field

I is current

A is area

We are given;

B = 0.19T

I = 6.2A

Rectangle dimensions = 5cm by 8cm = 0.05m by 0.08m

Thus;

Area; A = 0.05m × 0.08m = 0.004 m²

Thus;

τ = 0.19 × 6.2 × 0.004

τ = 4.712 × 10^(-3) J

Formula for the magnetic moment is given by;

M = IA

M = 6.2 × 0.004

M = 0.0248 J/T

Answer:

hi

Explanation:

pls mark as a BRAINLIST