Answer:
-434.14 kJ
Explanation:
Step 1: Write the balanced equation
4 NH₃(g) + 5 O₂(g) ⇒ 4 NO(g) + 6 H₂O(g)
Step 2: Calculate the standard free energy change (ΔG°r) for the reaction
We will use the following expression.
ΔG°r = 4 mol × ΔG°f(NO(g)) + 6 mol × ΔG°f(H₂O(g)) - 4 mol × ΔG°f(NH₃(g)) - 5 mol × ΔG°f(O₂(g))
ΔG°r = 4 mol × (86.55 kJ/mol) + 6 mol × (-228.57 kJ/mol) - 4 mol × (-16.45 kJ/mol) - 5 mol × (0 kJ/mol)
ΔG°r = -959.42 kJ
Step 3: Calculate the standard free energy change for 1.81 moles of NH₃
959.42 kJ are released per 4 moles of NH₃.
[tex]\frac{-959.42 kJ}{4mol} \times 1.81mol = -434.14 kJ[/tex]
A chemist fills a reaction vessel with 0.978 g aluminum hydroxide AlOH3 solid, 0.607 M aluminum Al+3 aqueous solution, and 0.396 M hydroxide OH− aqueous solution at a temperature of 25.0°C.
Under these conditions, calculate the reaction free energy ΔG for the following chemical reaction:
Al(OH)3(s) = A1+ (aq) +30H (aq)
Use the thermodynamic information in the ALEKS Data tab. Round your answer to the nearest kilojoule.
KJ
Answer: [tex]\Delta G^{0}[/tex] = 168.12 kJ
Explanation: Gibbs Free Energy, at any time, is defined as the enthalpy of the system minus product of temperature and entropy of the reaction, i.e.:
[tex]\Delta G^{0} = \Delta H^{0} - T.\Delta S^{0}[/tex]
Enthalpy is defined as internal heat existent in the system. It is calculated as:
[tex]\Delta H^{0} = \Sigma H^{0}_{product} - \Sigma H^{0}_{reagent}[/tex]
Using Enthalpy Formation Table:
[tex]\Delta H^{0} = [3*(-299.9)+(-524.7)] - (-1277)[/tex]
[tex]\Delta H^{0} = 62,6 kJ[/tex]
Entropy is the degree of disorder in the system. It is found by:
[tex]\Delta S^{0} = \Sigma S^{0}_{products} - \Sigma S^{0}_{reagents}[/tex]
Calculating:
[tex]\Delta S^{0} = (-321.7) + 3(-10.8) - 0[/tex]
[tex]\Delta S^{0} = -354.1J[/tex]
And so, Gibbs Free energy will be:
[tex]\Delta G^{0} = \Delta H^{0} - T.\Delta S^{0}[/tex]
[tex]\Delta G^{0} = 62600 - [298.(-354.1)][/tex]
[tex]\Delta G^{0} = 168121.8 J[/tex]
Rounding to the nearest kJ:
[tex]\Delta G^{0}[/tex] = 168.12 kJ
The insoluble salts below are put into 0.10 M hydrochloric acid solution. Do you expect their solubility to be more, less, or about the same as in a pure water solution?
1. Zinc sulfide
2. Silver chloride
3. Lead iodide
4. Silver hydroxide
Answer:
1. Zinc sulfide : about the same solubility, no common ion is found.
2. Silver chloride : less solubility due to the presence of chloride ions provided by the 0.10 M hydrochloric acid.
3. Lead iodide : about the same solubility, no common ion is found.
4. Silver hydroxide : about the same solubility, no common ion is found.
Explanation:
Hello,
In this case, we first must remember that adding a common ion (which is related with the dissolving solid) decreases the solubility of the insoluble solid due to the fact Le Chatelier's principle states the reaction will shift leftwards (reactants) to reestablish equilibrium, therefore, we have:
1. Zinc sulfide : about the same solubility, no common ion is found.
2. Silver chloride : less solubility due to the presence of chloride ions provided by the 0.10 M hydrochloric acid.
3. Lead iodide : about the same solubility, no common ion is found.
4. Silver hydroxide : about the same solubility, no common ion is found.
Best regards.
which of the following is an example of precipitate a. liquid evaporating into gas b. a solid form from a frozen liquid c. a chunky solid form from 2 liquids combining d. a liquid solution that contains 2 substances
Answer:
B and C
Explanation:
The google definition of precipitate is "a solid formed by a change in a solution, often due to a chemical reaction or change in temperature that decreases solubility of a solid". So in this case, the "solid formed from a frozen liquid" and "a chunky solid form from 2 liquids combining" are both examples of a precipitate.
The correct answer is C, a chunky solid form from 2 liquids combining.
In the laboratory, we usually mix two chemicals. When we mix the chemicals, we expect them to interact in one way or another. The interaction of those chemicals is known as a chemical reaction.
When we mix two liquid chemicals and they interact with each other to yield a solid product, we say that a chemical reaction has occurred and that such chemical reaction has produced a precipitate.
https://brainly.com/question/24276721
For each bond, show the direction of polarity by selecting the correct partial charges. _________ Si-P _________ _________ Si-Cl _________ _________ Cl-P _________ The most polar bond is _______
Answer:
Siδ⁺ -- Pδ⁻⁻
Clδ⁻⁻ -- Pδ⁺
Siδ⁺ -- Clδ⁻⁻
Of the mentioned bonds the most polar bond is Si -- Cl
The polarity of the bond primarily relies upon the electronegativity difference between the two atoms that forms the bond. Therefore, if the electronegativity difference between the two atoms that forms the bond is more the bond will be more polar, and if it is less then the bond will be less polar. The electronegativity of the atoms mentioned is Si = 1.8 , P = 2.1 and Cl = 3.00.
Therefore, the Si - Cl atoms exhibit more electronegativity difference, thus, the Si - Cl bond will be the most polar bond.
What is the density of a 10 kg mass that occupies 5 liters?
( pls need help)
Answer: d=2000 g/L
Explanation:
Density is mass/volume. The units are g/L. Since we are given mass and volume, we can divide them to find density. First, we need to convert kg to g.
[tex]10kg*\frac{1000g}{1kg} =10000 g[/tex]
Now that we have grams, we can divide to get density.
[tex]d=\frac{10000g}{5 L}[/tex]
d=2000g/L
Calculate the molality of a solution containing 141.5 g of glycine (NH2CH2COOH) dissolved in 4.456 kg of H2O
Answer:
0.423 m.
Explanation:
The following data were obtained from the question:
Mass of glycine (NH2CH2COOH) = 141.5 g
Mass of water = 4.456 kg
Molality =.?
Next, we shall determine the number of mole in 141.5 g of glycine (NH2CH2COOH.
This is illustrated below:
Mass of glycine (NH2CH2COOH) = 141.5 g
Molar mass of glycine (NH2CH2COOH) = 14 + (2x1) + 12 + (2x1) + 12 + 16 + 16 + 1 = 75 g/mol
Mole of glycine (NH2CH2COOH) =.?
Mole = mass /Molar mass
Mole of glycine (NH2CH2COOH) = 141.5/75
Mole of glycine (NH2CH2COOH) = 1.887 moles
Finally, we shall determine the molality of the solution as follow:
Molality is simply defined as the mole of solute per kilogram of water. Mathematically it is expressed as:
Molality = mole / mass (kg) of water
With the above formula, we can obtain the molality of the solution as follow:
Mole of glycine (NH2CH2COOH) = 1.887 moles
Mass of water = 4.456 kg
Molality =.?
Molality = mole /mass (kg) of water
Molality =1.887/4.456
Molality = 0.423 m
Therefore, the molality of the solution is 0.423 m
What is the formula of a compound if a sample of the compound contains 0.492 mol X, 0.197 mol Y, and 0.295 mol Z?
Answer:
X₅Y₂Z₃
Explanation:
The formula of a compound is determined as the whole number ratio between moles of each element present in the molecule.
The molecule is made from X, Y and Z. To fin the ratio we will divide the given moles in the moles of Y (0.197 moles), because is the element with the low number of moles.
X = 0.492 moles / 0.197 moles = 2.5
Y = 0.197 moles / 0.197 moles = 1
Z = 0.295 moles / 0.197 moles = 1.5
But, as the formula is given just with whole numbers, if we multiply each number twice:
X = 2.5*2 = 5
Y = 1*2 = 2
Z = 1.5*2 = 3
The formula is:
X₅Y₂Z₃whts the ph of po4 9.78
Answer:
4.22
Explanation:
We know from the question, that the pOH of the solution is 9.78. Now the pOH is defined as -log [OH^-].
If the pOH of a solution is given, one may obtain the pH of such solution from the formula;
pH + pOH =14
Hence we can write;
pH = 14-pOH
pH = 14 - 9.78 = 4.22
Hence the pH of the solution is 4.22.
243
Am
95
1. The atomic symbol of americium-243 is shown. Which of the following is correct?
• A. The atomic mass is 243 amu, and the atomic number is 95.
B. The atomic mass is 338 amu, and the atomic number is 95.
• C. The atomic mass is 95 amu, and the atomic number is 243.
D. The atomic mass is 243 amu, and the atomic number is 338.
Answer:
A. The atomic mass is 243 amu, and the atomic number is 95.
g Does a reaction occur when aqueous solutions of barium hydroxide and aluminum sulfate are combined
Answer:
3BaO + Al₂(SO₄)₃ → Al₂O₃+ 3BaSO₄
Explanation:
Yes! A reactiin occurs between barium hydroxide and auminium sulphate.
barium sulfate (BaSO4) and aluminum hydroxide (Al(OH)3) are the products obtained in this reaction.
The reaction is given by the equation below;
3BaO + Al₂(SO₄)₃ → Al₂O₃+ 3BaSO₄
When the nuclide bismuth-210 undergoes alpha decay:
The name of the product nuclide is_____.
The symbol for the product nuclide is_____
Fill in the nuclide symbol for the missing particle in the following nuclear equation.
_____ rightarrow 4He+ 234Th
2 90
Write a balanced nuclear equation for the following:
The nuclide radium-226 undergoes alpha emission.
Explanation:
An atom undergoes alpha decay by losing a helium atom.
So when bismuth undergoes alpha decay, we have;
²¹⁰₈₃Bi --> ⁴₂He + X
Mass number;
210 = 4 + x
x = 206
Atomic number;
83 = 2 + x
x = 81
The element is Thallium. The symbol is Ti.
For the second part;
X --> ⁴₂He + ²³⁴₉₀Th
Mass number;
x = 4 + 234 = 238
Atomic Number;
x = 2 + 90 = 92
The balanced nuclear equation is;
²³⁸₉₂U --> ⁴₂He + ²³⁴₉₀Th
A solution is known to contain only one type of cation. Addition of Cl1- ion to the solution had no apparent effect, but addition of (SO4)2- ion resulted in a precipitate. Which cation is present
Answer:
We can have: Calcium, strontium, or barium
Explanation:
In this case, we have to remember the solubility rules for sulfate [tex]SO_4~^-^2[/tex] and the chloride [tex]Cl^-[/tex]:
Sulfate
All sulfate salts are SOLUBLE-EXCEPT those also containing: Calcium, silver, mercury (I), strontium, barium or lead.([tex]Ca^+^2~,Ag^+~,Hg_2^+^2~,Sr^+2~,Ba^+^2~,Pb^+^2[/tex]), which are NOT soluble.
Chloride
All chloride salts as SOLUBLE-EXCEPT those also containing: lead, silver, or mercury (I). ([tex]Pb^+^2~,Ag^+~,Hg_2~^+^2[/tex]), which are NOT soluble.
If we the salt formed a precipitated with the sulfate anion, we will have as possibilities "Calcium, silver, mercury (I), strontium, barium or lead". If We dont have any precipitated with the Chloride anion we can discard "Silver, mercury (I), lead" and our possibilities are:
"Calcium, strontium, or barium".
I hope it helps!
Consider the reaction: C(s) + O2(g)CO2(g) Write the equilibrium constant for this reaction in terms of the equilibrium constants, Ka and Kb, for reactions a and b below: a.) C(s) + 1/2 O2(g) CO(g) Ka b.) CO(g) + 1/2 O2(g) CO2(g) Kb
Answer:
A. Ka = [CO2] / [C] [O2]^1/2
B. Kb = [CO2] / [CO] [O2]^1/2
Explanation:
Equilibrium constant is simply defined as the ratio of the concentration of the products raised to their coefficient to the concentration of the reactants raised to their coefficient.
Now, we shall obtain the expression for the equilibrium constant for the reaction as follow:
A. Determination of the expression for equilibrium constant Ka.
This is illustrated below:
C(s) + 1/2 O2(g) <==> CO(g)
Ka = [CO2] / [C] [O2]^1/2
B. Determination of the expression for equilibrium constant Kb.
This is illustrated below:
CO(g) + 1/2 O2(g) <==> CO2(g)
Kb = [CO2] / [CO] [O2]^1/2
Chemistry
What is a chemical reaction
Answer:
A process that involves rearrangement
Explanation:
A chemical reaction is the process that involves rearrangement of the molecular or ironic structure of a substance, as a distinct from a change in physical form or a nuclear reaction.
Answer:
Explanation:
Chemistry
The chemical reaction H2(g) + ½ O2(g) → H2O(l) describes the formation of water from its elements.
The reaction between iron and sulfur to form iron(II) sulfide is another chemical reaction, represented by the chemical equation:
8 Fe + S8 → 8 FeS
Indicate the peptides that would result from cleavage by the indicated reagent: a. Gly-Lys-Leu-Ala-Cys-Arg-Ala-Phe by trypsin b. Glu-Ala-Phe-Gly-Ala-Tyr by chymotrypsin
Answer:
a. Gly-Lys + Leu-Ala-Cys-Arg + Ala-Phe
b. Glu-Ala-Phe + Gly-Ala-Tyr
Explanation:
In this case, we have to remember which peptidic bonds can break each protease:
-) Trypsin
It breaks selectively the peptidic bond in the carbonyl group of lysine or arginine.
-) Chymotrypsin
It breaks selectively the peptidic bond in the carbonyl group of phenylalanine, tryptophan, or tyrosine.
With this in mind in "peptide a", the peptidic bonds that would be broken are the ones in the "Lis" and "Arg" (See figure 1).
In "peptide b", the peptidic bond that would be broken is the one in the "Phe" (See figure 2). The second amino acid that can be broken is tyrosine, but this amino acid is placed in the C terminal spot, therefore will not be involved in the hydrolysis.
Determine whether the following statement about equilibrium is true or false.
(a) When a reaction system reaches a state of equilibrium, the concentration of the products is equal to the concentration of the reactants.
(b) When a system is at equilibrium, Keq = 1.
(c) At equilibrium, the rates of the forward reaction and the reverse reaction are equal.
(d) Adding a catalyst to a reaction system will shift the position of equilibrium to the right so there are more products at equilibrium than if there was no catalyst present.
Answer:
(a) when a reaction system reaches a state of equilibrium, the concentration of the products is equal to the concentration of the reactants
Determining whether the statements about equilibrium is True or False
A) The concentration of the products is equal to the concentration of the reactants at equilibrium : TRUE
B) When a system is at equilibrium, Keq = 1 : TRUE
C) The rates of the forward reaction and the reverse reaction are equal at equilibrium : TRUE
D) Adding a catalyst to a reaction system will shift the position of equilibrium to the right : FALSE
Reaction at equilibriumIn a chemical reaction at equilibrium the value of Keq will be equal to 1 because the concentration of the products is equal to the concentration of the reactants in the chemica reaction. Also at equilibrium the rate of forward reaction is same as the rate of reverse reaction.
A catalyst can only affect the rate of reaction and not the amount of product ( yield of reaction).
Hence we can conclude that the answers to your questions are as listed above.
Learn more about Equilibrium : https://brainly.com/question/517289
#SPJ2
1500 L has how many significants figures
Answer:
It has 2
Explanation:
The significant figures are 1 and 5!
Hope this helps:)
What are the correct half reactions for the following reaction: Cu2+ + Mg -> Cu + Mg2+
Answer:
Cu2 + 2Mg-> 2Cu+ Mg2
Explanation:
Balance the equation and make sure both the reactant and the products are the same
Hope it will be helpful
[tex]Cu^{+2} + 2Mg[/tex] -> [tex]2Cu + Mg^+2[/tex] is the correct half-reactions.
What is a balanced equation?A balanced equation is an equation for a chemical reaction in which the number of atoms for each element in the reaction and the total oxidation numbers is the same for both the reactants and the products.
[tex]Cu^{+2} + 2Mg[/tex] -> [tex]2Cu + Mg^+2[/tex] is the correct half-reactions.
Magnesium is oxidized because its oxidation state increased from 0 to +2 while Cu is reduced because its oxidation state decreased from +2 to 0.
Learn more about balanced equations here:
brainly.com/question/15052184
#SPJ5
Consider the bond dissociation energies listed below in kcal/mol. CH3-Br 70 CH3CH2-Br 68 (CH3)2CH-Br 68 (CH3)3C-Br 65 These data show that the carbon-bromine bond is weakest when bromine is bound to a __________.
Answer:
The answer is "Tertiary carbon".
Explanation:
Accent to the results, the carbon-bromine bond is weak, whenever, the bromine is connected to tertiary carbon so, bonding energy is separation for methyl-carbon, which is connected to the bromine = 70 kcal/mol and for the primary energy to the secondary energy is= 68 kcal/mol, and for tertiary CO2 = 65 kcal/mol.
The stronger the energy dissociating connection and the weaker, its power dissociation connection and its weaker bond becomes connecting with a tertiary carbon, that's why "Tertiary carbon" is the correct answer.
At a constant temperature, a sample of a gas in a balloon that originally had a volume of 5.00 L and pressure of 626 torr has its volume changed to 6.72 L. Calculate the new pressure in torr.
Answer:
466 torr
Explanation:
Step 1: Given data
Initial pressure (P₁): 626 torrInitial volume (V₁): 5.00 LFinal pressure (P₂): ?Final volume (V₂): 6.72 LConstant temperatureStep 2: Calculate the final pressure
Since we have a gas changing at a constant temperature, we can calculate the final pressure using Boyle's law.
P₁ × V₁ = P₂ × V₂
P₂ = P₁ × V₁ / V₂
P₂ = 626 torr × 5.00 L / 6.72 L
P₂ = 466 torr
2. Which one is the odd one
out and why?
o Water
• Hydrogen
Chlorine
o Aluminum
Answer:
Reaction of Chlorine with Hydrogen Chlorine and Hydrogen mixed together explodes when exposed to sunlight, which produces Hydrogen Chloride. In the dark away from sunlight, no reaction occurs, so light energy is required for a reaction. Cl2 + H2 = 2 HCl Reaction of Chlorine with Non-Metals Chlorine directly combines with most non-metals.
Explanation:
I hope this helps bro
Zeros laced at the end of the significant number are...
Answer:
Zeros located at the end of significant figures are significant.
Explanation:
Hope it will help :)
The new hybrid car can get 51.5 km/gal. It has a top speed of 40000.00 cm/min and is 4m long. How fast can the car go in m/hr?
Answer:
The anawer of this question is 0.024 m/h
Explanation:
Other explanations of the question are additional.
What type of bond would form between two atoms of phosphorus? A. Single covalent bond B. Single ionic bond C. Triple covalent bond D. Double covalent bond
Answer:
A double bond is formed when two pairs of electrons are shared between the two participating atoms. It is represented by two dashes (=). It is represented by two dashes (=). Double covalent bonds are much stronger than a single bond, but they are less stable
Explanation:
. You have two solutions, both with a concentration of 0.1M. Solution A contains a weak acid with a pKa of 5. ThepH of solution A is 3. Solution B contains a weak acid with a pKa of 9. The pH of solution B is:
Answer:
pH of solution B is 5
Explanation:
A weak acid, HA, is in equilibrium with water as follows:
HA(aq) + H₂O(l) ⇄ A⁻(aq) + H₃O⁺(aq)
Where Ka (10^-pKa = 1x10⁻⁹) is:
Ka = 1x10⁻⁹ = [A⁻] [H₃O⁺] / [HA]
Where concentrations of this species are equilibrium concentrations
As initial concentration of HA is 0.1M, the equilibrium concentrations of the species are:
[HA] = 0.1M - X
[A⁻] = X
[H₃O⁺] = X
Where X is the amount of HA that reacts until reach the equilibrium, X is reaction coordinate.
Replacing in Ka expression:
1x10⁻⁹ = [A⁻] [H₃O⁺] / [HA]
1x10⁻⁹ = [X] [X] / [0.1 - X]
1x10⁻¹⁰ - 1x10⁻⁹X = X²
1x10⁻¹⁰ - 1x10⁻⁹X - X² = 0
Solving for X:
X = -0.00001 → False solution, there is no negative concentrations.
X = 1x10⁻⁵ → Right solution.
As [H₃O⁺] = X
[H₃O⁺] = 1x10⁻⁵M
And pH = -log[H₃O⁺]
pH = 5
pH of solution B is 5
An ice cube at 0.00C with a mass of 8.32g is placed Into 55g of water, initially at 25C. If no heat is lost to the surroundings, what is the final temperature of the entire water sample after all the ice is melted (answer must be in 3 sig figs)
Answer:
The final temperature of the entire water sample after all the ice is melted, is 12,9°C. We should realize that if there is no loss of heat in our system, the sum of lost or gained heat is 0. It is logical to say that the temperature has decreased because the ice gave the water "heat" and cooled it
Thats all i know
Explain your reasoning. Match each explanation to the appropriate blanks in the sentences on the right.
1. the atomic radius decreases
2. the number of gas molecules decreases
3. molar mass and structure complexity decreases
4. structure complexity decreases
5. molar mass decreases
6. each phase (gas, liquid, solid) becomes more ordered
A (I_2(g), Br_2 (g), Cl_2 (g), F_2 (B): The ranking can best be explained by the trend entropy decreases as______.
B (H_2O_2 (g), H_2S(g), H_2O(g): The ranking can best be explained by the decreases a trend entropy decreases as_______.
C. (C(s, amorphous), C(s, graphite), C(s, diamond): The ranking can best be explained by the trend entropy decreases as_______.
Answer:
A (I_2(g), Br_2 (g), Cl_2 (g), F_2 (B): The ranking can best be explained by the trend entropy decreases as 5. molar mass decreases.
B (H_2O_2 (g), H_2S(g), H_2O(g): The ranking can best be explained by the decreases a trend entropy decreases as 3. molar mass and structure complexity decreases.
C. (C(s, amorphous), C(s, graphite), C(s, diamond): The ranking can best be explained by the trend entropy decreases as 4. structure complexity decreases.
Explanation:
Hello.
In this case, we can understand a higher entropy when more disorder is present and a lower entropy when less disorder is present, thus:
A (I_2(g), Br_2 (g), Cl_2 (g), F_2 (B): The ranking can best be explained by the trend entropy decreases as 5. molar mass decreases since iodine has the greatest molar mass (254 g/mol) and fluorine the least molar mass (38 g/mol).
B (H_2O_2 (g), H_2S(g), H_2O(g): The ranking can best be explained by the decreases a trend entropy decreases as 3. molar mass and structure complexity decreases since hydrogen peroxide weights 34 g/mol as well as hydrogen sulfide but the peroxide has more bonds (more complex, higher entropy).
C. (C(s, amorphous), C(s, graphite), C(s, diamond): The ranking can best be explained by the trend entropy decreases as 4. structure complexity decreases since diamond has a well-ordered structure and amorphous carbon has a very disordered one.
Best regards.
How does the spontaneity of the process below depend on temperature? PCl5(g)+H2O(g)→POCl3(g)+2HCl(g) ΔH=−126 kJ mol−1, ΔS=146 J K−1mol−
The given question is incomplete, the complete question is:
How does the spontaneity of the process below depend on temperature? PCI5(9)+H2O(g)POCI3(g) +2HCI(g) -126 kJ mol1, AS = 146 J K-'mol1 ΔΗ Select the correct answer below: nonspontaneous at all temperatures spontaneous at all temperatures spontaneous at high temperatures and nonspontaneous at low temperatures spontaneous at low temperatures and nonspontaneous at high temperatures
Answer:
The correct answer is spontaneous at all the temperatures.
Explanation:
Gibbs Free energy is an essential relation that determines the spontaneity of any reaction, that is, ΔG = ΔH - TΔS
When ΔG is less than zero, that is, negative, the reaction is considered to be in spontaneous state. Based on the given information, ΔH = -126 kJ/mol
= -126000 J/mol, it is negative
ΔS = 146 J/K/mol, it is positive
Now, ΔG = ΔH-TΔS
= (-ve) - T (+ve), Thus, when ΔH, is -ve, ΔS is +ve, -TΔS is -ve, the ΔG will be -ve. Therefore, reaction will be spontaneous at all the temperatures.
An atom of 108Te has a mass of 107.929550 amu. Calculate the binding energy per MOLE in kJ. Use the values: mass of 1H atom
Answer:
The binding energy = 8.64972649×10¹⁰ kJ/mole
Explanation:
Given that:
An atom of 108Te has a mass of 107.929550 amu.
In a 108 Te atom, there are 52 protons and 56 neutrons
where;
mass of proton= 1.007825 amu
mass of neutron= 1.008665 amu
Similarly; The atomic number of Te = 52
the mass of 52 protons = 52 × 1.007825 amu
the mass of 52 protons = 52.4069 amu
the mass of 56 neutrons = 56 × 1.008665 amu
the mass of 56 neutrons = 56.48524 amu
The total mass can now be = the mass of 52 protons + the mass of 56 neutrons
The total mass = 52.4069 amu + 56.48524 amu
The total mass = 108.89214 amu
Recall : it is given that An atom of 108Te has a mass of 107.929550 amu.
Therefore, the mass defect will be = 108.89214 amu - 107.929550 amu
the mass defect = 0.96259amu
where 1 amu = 1.66× 10⁻²⁷ kg
Therefore, 0.96259amu = (0.96259 × 1.66× 10⁻²⁷) kg
= 1.5978994 × 10⁻²⁷kg
The binding energy = mass defect × (speed of light)²
where;
speed of light c = 2.99792 × 10⁸ m/s
The binding energy = 1.5978994 × 10⁻²⁷kg × 2.99792 × 10⁸ m/s
The binding energy = 1.43611597 × 10⁻¹⁰ J
The binding energy = 1.43611597 × 10⁻¹³ kJ/atom
since 1 mole = 6.023 × 10²³ atom (avogadro's constant)
Then;
The binding energy = ( 1.43611597 × 10⁻¹³ )× (6.023 × 10²³) kJ/mole
The binding energy = 8.64972649×10¹⁰ kJ/mole
Determine the oxidation state for each of the elements below. The oxidation state of ... silver ... in ... silver oxide Ag2O ... is ... ___ . The oxidation state of sulfur in sulfur dioxide SO2 is ___ . The oxidation state of iron in iron(
Answer:
The oxidation state of silver in [tex]\rm Ag_2O[/tex] is [tex]+1[/tex].
The oxidation state of sulfur in [tex]\rm SO_2[/tex] is [tex]+4[/tex].
Explanation:
The oxidation states of atoms in a compound should add up to zero.
Ag₂OThere are two silver [tex]\rm Ag[/tex] atoms and one oxygen [tex]\rm O[/tex] atom in one formula unit of [tex]\rm Ag_2O[/tex]. Therefore:
[tex]\begin{aligned}&\rm 2 \times \text{Oxidation state of $\rm Ag$}+ \rm 1 \times \text{Oxidation state of $\rm O$} = 0\end{aligned}[/tex].
The oxidation state of oxygen in most compounds (with the exception of peroxides and fluorides) is [tex]-2[/tex]. Silver oxide [tex]\rm Ag_2O[/tex] isn't an exception. Therefore:
[tex]\begin{aligned}&\rm 2 \times \text{Oxidation state of $\rm Ag$}+ \rm 1 \times \text{Oxidation state of $\rm O$} = 0\\ &\rm 2 \times \text{Oxidation state of $\rm Ag$}+ \rm 1 \times (-2) = 0\end{aligned}[/tex].
Solve this equation for the (average) oxidation state of [tex]\rm Ag[/tex]:
[tex]\text{Oxidation state of $\rm Ag$} = 1[/tex].
SO₂Similarly, because there are one sulfur [tex]\rm S[/tex] atom and two oxygen [tex]\rm O[/tex] atoms in each [tex]\rm SO_2[/tex] molecules:
[tex]\begin{aligned}&\rm 1\times \text{Oxidation state of $\rm S$}+ \rm 2 \times \text{Oxidation state of $\rm O$} = 0\end{aligned}[/tex].
The oxidation state of [tex]\rm O[/tex] in [tex]\rm SO_2[/tex] is also [tex]-2[/tex], not an exception, either.
Therefore:
[tex]\begin{aligned}&\rm 1 \times \text{Oxidation state of $\rm S$}+ \rm 2 \times \text{Oxidation state of $\rm O$} = 0\\ &\rm 1 \times \text{Oxidation state of $\rm S$}+ \rm 2 \times (-2) = 0\end{aligned}[/tex].
Solve this equation for the oxidation state of [tex]\rm S[/tex] here:
[tex]\text{Oxidation state of $\rm S$} = 4[/tex].
