Answer:
[H⁺] = 1.0 x 10⁻¹² M.
Explanation:
∵ [H⁺][OH⁻] = 10⁻¹⁴.
[OH⁻] = 1 x 10⁻² mol/L.
∴ [H⁺] = 10⁻¹⁴/[OH⁻] = (10⁻¹⁴)/(1 x 10⁻² mol/L) = 1.0 x 10⁻¹² M.
∵ pH = - log[H⁺] = - log(1.0 x 10⁻¹² M) = 12.0.
∴ The solution is basic, since pH id higher than 7 and also the [OH⁻] > [H⁺].
I think- IDK
When will the simping end
Answer:
Nvr XD
Explanation:
Answer:
the world may never know
Explanation:
mention two instruments that could be used to transfer sodium hydroxide solution into conical flask
Answer:
Pipette and Burettes
Explanation:
The two instruments that can be used for
a) Pipette – It is used to dispense measured volume of any liquid into any other equipment. Pipette works on the concept of creating a partial vacuum to take in the liquid and then release the volume to dispense the liquid.
b) Burettes – It has a stopcock that regulate the release of liquid. It is larger than the pipette and works as a graduated cylinder.
what is the compound of scI2
Answer:
sulfur dichloride
Explanation:
SCl2 is the chemical formula for sulfur dichloride. This compound is made of only two elements, so it is a binary compound.
How many moles of O2 are needed to react completely with 35.0 mol of 10 points
FeCl3? *
4FeCl3 + 302 — 2Fe2O3 + 3Cl2
A) 26.3 mol
B) 46.7 mol
C) 23.3 mol
D) 10.0 mol
A balloon containing N2 has 1.70 moles and occupies 3.80L. What will the volume be if the number of moles is increased to 2.60moles?
Help me please
Answer:
5.81L
Explanation:
N1 = 1.70 moles
V1 = 3.80L
V2 = ?
N2 = 2.60 moles
Mole - volume relationship,
N1 / V1 = N2 / V2
V2 = (N2 × V1) / N1
V2 = (2.60 × 3.80) / 1.70
V2 = 9.88 / 1.70
V2 = 5.81 L
The volume of the gas is 5.81L
A radioactive isotope has a half life of 25 minutes. How many half lives have occurred after 175 minutes?
5
6
7
8
Will give Brainliest
Answer:
7
Explanation:
Consider the equation for acetic acid plus water HC2H2O2 + H2O --> C2HcO2- + H3O+ a)compare the strengths of the two acids in the equation. Do the same for the two bases. b) Determine which direction -- forward or reverse -- is favored in the reaction.
Considering the two acids and bases involved, the reverse reaction is favored.
Reversible reactionThe term reversible reaction refers to a reaction that can go either forward or backwards depending on the conditions of the reaction.
We must recall that acetic acid is a weak acid hence the equilibrium position would always lie towards the left hand side of the equation. Hence considering the two acids and bases involved, the reverse reaction is favored.
Learn more about reversible reaction:https://brainly.com/question/8592296
if the [H+] = 0.01 M, what is the pH of the solution, and is the solution a strong acid, weak acid, strong base, or weak base?
12, strong base
2, weak acid
12, weak base
2, strong acid
Answer:
2, strong acid
Explanation:
Data obtained from the question. This includes:
[H+] = 0.01 M
pH =?
pH of a solution can be obtained by using the following formula:
pH = –Log [H+]
pH = –Log 0.01
pH = 2
The pH of a solution ranging between 0 and 6 is declared to be an acid solution. The smaller the pH value, the stronger the acid.
Since the pH of the above solution is 2, it means the solution is a strong acid.
Can someone help me with this?
Answer:
D) condensing C) boiling
What is the molarity of a 50.0 ml aqueous solution containing 10.0 grams of table sal, Nacl?
Answer:
The molarity of a 50.0 ml aqueous solution containing 10.0 grams of table sal, Nacl, is 3.42 [tex]\frac{moles}{L}[/tex]
Explanation:
Molarity is a unit of concentration based on the volume of a solution and is defined as the number of moles of solute per liter of solution. Then, the molarity of a solution is calculated by dividing the moles of the solute by the liters of the solution.
[tex]Molarity (M)=\frac{number of moles of the solute}{volume of the solution}[/tex]
Molarity is expressed in units ([tex]\frac{moles}{liter}[/tex]).
Then you must know the amount of moles of the NaCl solute. For that it is necessary to know the molar mass. Being:
Na: 23 g/moleCl: 35.45 g/molethe molar mass of NaCl is: 23 g/mole + 35.45 g/mole= 58.45 g/mole
Then a rule of three applies as follows: if 58.45 grams are present in 1 mole of NaCl, 10 grams in how many moles will they be?
[tex]moles=\frac{10 grams*1 mole}{58.45 grams}[/tex]
moles= 0.171
So you know:
number of moles of solute= 0.171 molesvolume= 50 mL= 0.05 LReplacing in the definition of molarity:
[tex]Molarity (M)=\frac{0.171 moles}{0.05 L}[/tex]
Solving:
Molarity= 3.42 [tex]\frac{moles}{L}[/tex]
The molarity of a 50.0 ml aqueous solution containing 10.0 grams of table sal, Nacl, is 3.42 [tex]\frac{moles}{L}[/tex]
In ΔDEF, the measure of ∠F=90°, FE = 16, DF = 63, and ED = 65. What ratio represents the tangent of ∠E?
Answer:
63/16
Explanation:
tanE=
adjacent
opposite
=
16
63
Answer:
63/16
Explanation:
this for delta math?
Given the equation representing a solution equilibrium: BaSO4(s) <—> Ba2+ (aq) + SO4 2- (aq)
What occurs when Na2SO4(s) is added to this system, increasing the concentration of SO4 2- (aq)?
1) The equilibrium shifts to the left, and the concentration of Ba2+(aq) decreases
2)The equilibrium shifts to the left, and the concentration of Ba2+(aq) increases
3)The equilibrium shifts to the right, and the concentration of Ba2+(aq) decreases
4)The equilibrium shifts to the right, and the concentration of Ba2+(aq) increases
Answer:
The equilibrium shifts to the left, and the concentration of Ba2+(aq) decreases
Explanation:
Whenever a solution of an ionic substance comes into contact with another ionic compound with which it shares a common ion, the solubility of the ionic substance in solution decreases significantly.
In this case, both BaSO4 and Na2SO4 both possess the SO4^2- anion. Hence SO4^2- anion is the common ion. Given the equilibrium;
BaSO4(s) <—> Ba2+ (aq) + SO4 2- (aq), addition of Na2SO4 will decrease the solubility of BaSO4 due to the presence of a common SO4^2- anion compared to pure water.
This implies that the equilibrium will shift to the left, (more undissoctiated BaSO4) hence decreasing the Ba^2+(aq) concentration.
1) The equilibrium shifts to the left, and the concentration of [tex]Ba^{2+}[/tex](aq) decreases
Conditions for equilibrium:Whenever a solution of an ionic substance comes into contact with another ionic compound with which it shares a common ion, the solubility of the ionic substance in the solution decreases significantly.
In this case, both BaSO₄ and Na₂SO₄ both possess the [tex]SO_4^{2-}[/tex] anion. Hence [tex]SO_4^{2-}[/tex] anion is the common ion.
Given the equilibrium;
[tex]BaSO_4(s) < = > Ba^{2+} (aq) + SO_4^{2-} (aq)[/tex],
The addition of Na₂SO₄ will decrease the solubility of BaSO₄ due to the presence of a common [tex]SO_4^{2-}[/tex] anion compared to pure water.
This implies that the equilibrium will shift to the left, (more undissociated BaSO₄ ) hence decreasing the [tex]Ba^{2+}[/tex]aq) concentration.
Find more information about Equilibrium here:
brainly.com/question/19340344
Which of the following statements is NOT true?
A. The corn that we grow today has not changed since prehistoric times.
B. Early humans planted seeds from corn plants with large kernels.
C. It took many generations for corn plants to change.
D. Humans have selectively bred many different types of crops.
Answer:
A. Corn has changed over time due to selective breeding.
Hope this helps :)
The element hydrogen has the highest specific heat of all elements. At room temperature, hydrogen's specific heat is 14.30 J/g •°C. If the temperature of a 340.0 g sample of hydrogen is to be raised by 30°C, how much energy will have to be added to the hydrogen?
Answer:
THE ENERGY NEEDED TO BE ADDED TO RAISE THE TEMPERATURE BY 30°C IS 145, 860 J
Explanation:
The energy needed can be calculated by using the heat formula, which is;
Heat = m c ΔT
m = mass of the hydrogen = 340 g
c = specific heat capacity of hydrogen at room temperature = 14.30 J/g°C
ΔT = change in temperature = 30°C
Heat =?
So therefore,
Heat = 340 * 14.30 * 30
Heat = 145860 J
The energy needed to be added to the hydrogen to bring the mass of 340 g to an increased temperature of 30°C is 145, 860 J or 145.86kJ
ipt Which of the following is true about semipermeable membranes?
A. A semipermeable membrane allows passage of solute particles but not solvent particles.
B. A semipermeable membrane allows passage of solvent particles but not solute particles.
C. A semipermeable membrane allows passage of both solvent and solute particles.
D. A semipermeable membrane does not allow passage of either solvent or solute particles.
How many times more acidic is a pH of 2 than a PH of 7?
Answer: 10 times more
Explanation:
5. How is a cell wall different from a cell membrane?
Will a reaction occur in KCl +Br2= KBr + Cl2
Complete and balance this neutralization reaction: HNO3 + Al(OH)3
Answer:
Al(OH)3 + HNO3 = Al(NO3)3 + H2O - Chemical Equation Balancer.
Explanation:
The enthalpies of formation of the compounds in the combustion of methane, , are CH4 (g): Hf = –74.6 kJ/mol; CO2 (g): Hf = –393.5 kJ/mol; and H2 O(g): Hf = –241.82 kJ/mol. How much heat is released by the combustion of 2 mol of methane? Use .
Answer:
The amount of energy released from the combustion of 2 moles of methae is 1,605.08 kJ/mol
Explanation:
The chemical reaction of the combustion of methane is given as follows;
CH₄ (g) + 2O₂ (g) → CO₂ (g) + 2H₂O (g)
Hence, 1 mole of methane combines with 2 moles of oxygen gas to form 1 mole of carbon dioxide and 2 moles of water vapor
Where:
CH₄ (g): Hf = -74.6 kJ/mol
CO₂ (g): Hf = -393.5 kJ/mol
H₂O (g): Hf = -241.82 kJ/mol
Therefore, the combustion of 1 mole of methane releases;
-393.5 kJ/mol × 1 + 241.82 kJ/mol × 2 + 74.6 kJ/mol = -802.54 kJ/mol
Hence the combustion of 2 moles of methae will rellease;
2 × -802.54 kJ/mol or 1,605.08 kJ/mol.
Answer: answer is C
Explanation:
Just took the test
Which is not a reason that water is used to store spent fuel rods from nuclear power plants?
Water increases the speed of the chain reaction in the fuel rods.
Water protects nuclear power plant workers from the high temperature and radiation of the fuel rods.
Water acts as a radiation shield to reduce the radiation levels.
Water cools the spent rods.
Answer:
I believe the answer would be A
Which of the following is the correct definition of conduction?
A.
the transmission of heat across empty space
B.
the electromagnetic radiation from the surface of an object which is due to the object's temperature
C.
the transfer of heat by currents within a liquid or gas
D.
the transmission of heat across matter
Answer:
the transmission of heat across matter
Explanation:
Conduction is the transmission of heat across matter. Even though heat flows across matter during conduction, the matter itself does not flow.
Atom X contains seven protons and seven neutrons. Atom Z contains seven and eight neutrons. Which of the following statemenats correctly describes the two atoms?
A.They are isotopes
B.They are radioactive
C.They are atims of different elements.
D. They have the same mass number
Piz help!!!!
Answer:
A. They are isotopes.
Explanation:
An isotope is an element with the same number of protons but different number of neutrons resulting in a varied mass number/molecular weight.
how many number of electrons are in aluminium and nitrogen in their free state?
Answer:
MRCORRECT has answered the question
Explanation:
13 electrons
So... for the element of ALUMINUM, you already know that the atomic number tells you the number of electrons. That means there are 13 electrons in a aluminum atom. you can see there are two electrons in shell one, eight in shell two, and three in shell three.
7 electrons
So... for the element of NITROGEN, you already know that the atomic number tells you the number of electrons. That means there are 7 electrons in a nitrogen atom. Looking at the picture, you can see there are two electrons in shell one and five in shell two.
You are given the reaction Cu + HNO3 Cu(NO3)2 + NO + H2O complete the final balanced equation based on half-reactions
The balanced equation based on half-reactions is 2Cu + 8HNO3 + 6H+ -> 2Cu(NO3)2 + 2NO + 4H2O.
How to determine the balanced equation based on half-reactionsTo complete the balanced equation for the given reaction Cu + HNO3 -> Cu(NO3)2 + NO + H2O using half-reactions, we need to break down the overall reaction into separate oxidation and reduction half-reactions.
1. Oxidation Half-Reaction:
Cu -> Cu2+ + 2e-
In this step, copper (Cu) is oxidized, losing two electrons to form copper(II) ions (Cu2+).
2. Reduction Half-Reaction:
HNO3 + 3H+ + 2e- -> NO + 2H2O
In this step, nitric acid (HNO3) is reduced, gaining two electrons to form nitric oxide (NO) and water (H2O).
Now, to balance the half-reactions, we need to make sure that the number of electrons gained in the reduction half-reaction is equal to the number of electrons lost in the oxidation half-reaction. In this case, we can achieve this by multiplying the oxidation half-reaction by two.
Balanced Half-Reactions:
Oxidation: 2Cu -> 2Cu2+ + 4e-
Reduction: HNO3 + 3H+ + 2e- -> NO + 2H2O
Finally, we can combine the balanced half-reactions to obtain the balanced equation for the overall reaction:
2Cu + 8HNO3 + 6H+ -> 2Cu(NO3)2 + 2NO + 4H2O
Therefore, the balanced equation based on half-reactions is 2Cu + 8HNO3 + 6H+ -> 2Cu(NO3)2 + 2NO + 4H2O.
Learn more about oxidation at https://brainly.com/question/25551544
#SPJ6
Copper and silver are two examples of atoms that will form a(n) _____.
metallic bond
ionic bond
covalent bond
none of the above
Answer:
metallic bond but not completely sure
Explanation:
Which is the molar mass of Calcium?
Answer:
40.078 u
Explanation:
What happens when kmno4 is heated
Answer:
kmno4 is heated => k2mno4 + mno2 + o2
Hope this helps!
:)
Write the full symbol for the isotope of oxygen having 8 neutrons.
Answer:
Isotopes are forms of a chemical element that have the same atomic number but differ in mass. 16O → 8 protons + 8 neutrons; a “light” oxygen); The relative amounts are expressed as either 18O/16O or δ 18O Oxygen - 18 (aka 18O → 8 protons + 10 neutrons; a “heavy” oxygen).
formula of silver nitrite
Answer:
AgNO₃
Explanation:
Ag = Silver
NO₃ = Nitrate
