6. An object is fired from the gound at 275 m/s at an angle of 55° N of E.
a. How far away did the object first hit the ground?
b. what is the maximum height that the object reaches? ​

Solution :

When the spacecraft is at halfway point, the distance from the Earth as well as Mars are same. We have to account the masses of the planets. The gravitational force that is exerted by the Earth is greater because of its combined mass with the space probe.

The mass of Earth is greater than the mass of Mars. Therefore, the force of Earth is more than Mars.

Answer:

Deflating the tires by pulling the valve stems

Explanation:

When an accident happens, the EMT process is to take off the top of the vehicle of the highly damaged vehicle so that it can easily be assessed to rescue the vehicle occupants. This creates a bigger exit for the rescuers to take out the people. Vehicle extrication means removing the vehicle from around someone involved in a fatal collision, when other other ways of exiting is not advised or possible. to stabilize the vehicle you have to deflate all tires by pulling the valve stems.

Answer:

[tex]Q=50.3[/tex]

Explanation:

From the question we are told that:

Frequency [tex]F=330Hz[/tex]

Sound intensity drop [tex]I_d=2[/tex]

Time [tex]T=4s[/tex]

Therefore

Sound intensity Ratio

 [tex]\frac{I}{I_x}=\frac{1}{2}[/tex]

Generally the equation for Sound intensity is mathematically given by

 [tex]\frac{I}{I_x}=e^{-4\ \=t}[/tex]

 [tex]\frac{1}{2}=e^{-4\ \=t}[/tex]

 [tex]\=t =5.8s[/tex]

Generally the equation for Quality Factor is mathematically given by

 [tex]Q=2 \pi\frac{E}{\triangle E}[/tex]

 [tex]Q=2 \pi\frac{E}{\frac{E}{2*4}}[/tex]

 [tex]Q=50.3[/tex]

Answer:

The law of momentum conservation can be stated as follows. For a collision occurring between object 1 and object 2 in an isolated system, the total momentum of the two objects before the collision is equal to the total momentum of the two objects after the collision.

Answer:

mechanical waves,

.

the quality of a sound governed by the rate of vibrations producing it; the degree of highness or lowness of a tone.

.

If the amplitude increases the volume increases and vice versa.

.

The type of medium affects a sound wave as sound travels with the help of the vibration in particles.

.

The higher the frequency, the shorter the wavelength.

Explanation:

Answer:

1 . Soundwave

2. pitch are sounds that are high or low corresponding and according to a certain frequency measured in Hertz

3. volume is the increase in sound or decrease in sound how loud or soft something is while amplitude is strength of sound

4. frequency is measured in Hertz one wave per second and wavelength is distance between corresponding points of two recurring and consecutive sound waves

Explanation:

The Simple Pendulum. A simple pendulum is defined to have a point mass, also known as the pendulum bob, which is suspended from a string of length L with negligible mass ((Figure)). Here, the only forces acting on the bob are the force of gravity (i.e., the weight of the bob) and tension from the string.

hope it helps you

Answer: hi your question is incomplete  attached below is the complete question

answer :

magnitude of acceleration :  | a | = g = 9.81 m/s^2

direction : a = - g j

Explanation:

Neglecting Air resistance

magnitude of acceleration :

| a | = g = 9.81 m/s^2

Direction of acceleration

a = - g j  ( given that the direction of acceleration is against the acceleration due to gravity i.e. in the opposite direction )

Answer:

The field is parallel to the direction of flow of the current.

Answer:

1) Disolver azúcar en agua - Cambio químico - Es un caso de una solución en donde el solvente es el azúcar y el soluto es el agua.

2) Freir una chuleta - Cambio físico - Es un proceso de cocinado por un transferencia de calor y transferencia de masa.

3) Arrugar un papel - Cambio físico - Se aplica fuerzas externas para deformar el papel.

4) El proceso de la digestión - Cambio químico - Reducción de los alimentos a desechos y la absorción de nutrientes por el contacto con jugos gástricos o ambientes intestinales.

5) Secar la ropa al sol - Cambio físico - El secado es un fenómeno de transferencia de masa.

6) Congelar una paleta de agua - Cambio físico - Cambio del estado líquido al estado sólido por transferencia de calor.

7) Hacer un avión de papel - Cambio físico - Aplicación de fuerzas externas para plegar y doblar la hoja de papel.

8) Oxidación del cobre - Cambio químico - Proceso de corrosión por contacto con iones que se transportan en el ambiente.

9) Romper un lápiz - Cambio físico - Proceso de ruptura por esfuerzo normal a causa de un momento como consecuencia de una fuerza externa aplicada sobre el lápiz.

10) Prender fuegos artificiales - Cambio químico - Reacción química de reducción-oxidación.

11) Excavar un hoyo - Cambio físico - Remoción de tierra por trabajo físico.

12) Quemar basura - Cambio químico - Reacción de combustión.

Explanation:

A continuación, veremos que representa cada caso:

1) Disolver azúcar en agua - Cambio químico - Es un caso de una solución en donde el solvente es el azúcar y el soluto es el agua.

2) Freir una chuleta - Cambio físico - Es un proceso de cocinado por un transferencia de calor y transferencia de masa.

3) Arrugar un papel - Cambio físico - Se aplica fuerzas externas para deformar el papel.

4) El proceso de la digestión - Cambio químico - Reducción de los alimentos a desechos y la absorción de nutrientes por el contacto con jugos gástricos o ambientes intestinales.

5) Secar la ropa al sol - Cambio físico - El secado es un fenómeno de transferencia de masa.

6) Congelar una paleta de agua - Cambio físico - Cambio del estado líquido al estado sólido por transferencia de calor.

7) Hacer un avión de papel - Cambio físico - Aplicación de fuerzas externas para plegar y doblar la hoja de papel.

8) Oxidación del cobre - Cambio químico - Proceso de corrosión por contacto con iones que se transportan en el ambiente.

9) Romper un lápiz - Cambio físico - Proceso de ruptura por esfuerzo normal a causa de un momento como consecuencia de una fuerza externa aplicada sobre el lápiz.

10) Prender fuegos artificiales - Cambio químico - Reacción química de reducción-oxidación.

11) Excavar un hoyo - Cambio físico - Remoción de tierra por trabajo físico.

12) Quemar basura - Cambio químico - Reacción de combustión.

Answer:

speed i uniform

Explanation:

if the speed is constant

Answer:

A

Explanation:

if it has a constant acceleration

Answer:

25 km/hr

Explanation:

Since Ali's average speed for his trip to school is u = 20 km/hr and his average speed for the return trip to back home from school is v = 30 km/hr, thus his total average speed for the journey is thus V = (initial average speed + final average speed)/2 = (u + v)/2

Substituting the values of the variables into the equation, we have

V = (u + v)/2

V = (20  km/hr + 30 km/hr)/2

V = 50 km/hr/2

V = 25 km/hr

So, the average speed for Ali's trip is 25 km/hr

Answer:

Carryonlearning

Answer:

[tex]T=7.5*10^{-5}[/tex]

Explanation:

From the question we are told that:

Radius [tex]r=2cm[/tex]

Work done [tex]W=1.5×10^-4 joules[/tex]

Generally the equation for Work done is mathematically given by

 [tex]W=T.dA[/tex]

Therefore

 [tex]T=\frac{W}{dr}[/tex]

 [tex]T=\frac{1.5*10^{-4}}{2}[/tex]

 [tex]T=7.5*10^{-5}[/tex]

The question is incomplete, the complete question is;

Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions. Which is the best analysis of Eli’s statement? It is correct because each ion is a pure substance, so sodium phosphate is made up of two pure substances. It is correct because the composition of sodium phosphate changes depending on the sample. It is incorrect because sodium phosphate is a compound that has a single composition. It is incorrect because the two types of ions in sodium phosphate cannot be seen.

Answer:

It is incorrect because sodium phosphate is a compound that has a single composition

Explanation:

A compound is a neutral substance made up of two or more atoms which are chemically combined together.

Ionic substances are made up of ions. These ions are not separate entities, they are part of the compound.

Hence, Eli's statement is incorrect because sodium phosphate is a compound that has a single composition.

Answer:

The time in which the pendulum does a complete revolution is called the period of the pendulum.

Remember that the period of a pendulum is written as:

T = 2*pi*√(L/g)

where:

L = length of the pendulum

pi = 3.14

g = 9.8 m/s^2

Here we know that  L = 14.4m

Then the period of the pendulum will be:

T = 2*3.14*√(14.4m/9.8m/s^2) = 7.61s

So one complete oscillation takes 7.61 seconds.

We know that the pendulum starts moving at 8:00 am

We want to know 12:00 noon, which is four hours after the pendulum starts moving.

So, we want to know how many complete oscillations happen in a timelapse of 4 hours.

Each oscillation takes 7.61 seconds.

The total number of oscillations will be the quotient between the total time (4 hours) and the period.

First we need to write both of these in the same units, we know that 1 hour = 3600 seconds

then:

4 hours = 4*(3600 seconds) = 14,400 s

The total number of oscillations in that time frame is:

N = 14,400s/7.61s = 1,892.25

Rounding to the next whole number, we have:

N = 1,892

The pendulum does 1,892 oscillations between 8:00 am and 12:00 noon.

[tex]option \: (a) \: is \: correct.[/tex]

Explanation:

Yes, I was wrong. Pressure increases as the area decreases.

As per the Figure A, the truck is so heavy and having a greater mass. So, the area of contact between the tyres and the road increases and decreases it's pressure on the road due to the increase in area.

As per the Figure B, You know the nature of Tomato that it is soft and smooth to touch and also lighter mass when it's compared with the truck. As it having a lighter mass, it can be cut through the sharp knife. The area of contact decreases and pressure increases on the vegetables.

Answer:

Option number B

Explanation:

The pressure is indirectly proportional to the area therefore pressure decreases when the area increases, and pressure increases when the area decreases

Answer:

Explanation:

If the distance to the end of the road was 40 m, and she traveled back to where she started, she traveled a total distance of 80 m. It took her 100 seconds to travel the 80 m.

Based on the given distance-time graph, the number of seconds that Angela used to go to the end of the road and arrive back is 100 seconds.

The end of the road is 40m and coming back is also 40 m. The total distance is:

= 40 + 40

= 80m

The graph shows that to walk 80 meters, Angela took a 100 seconds because the line on the graph ends at 80 m and 100 seconds.

Find out more uses of distance-time graphs at https://brainly.com/question/13877898.

#SPJ6

Answer:

0.4

Explanation:

A concave lens is a diverging lens, so it will always have a negative focal length. Image distance is always negative for a concave lens because it forms virtual images.

From the lens formula;

1/f = 1/u+ 1/v

- 1/2 = 1/3 - 1/v

1/v = 1/3 + 1/2

v= 6/5

v= 1.2 cm

Magnification = image distance/object distance

Magnification = 1.2cm/3cm

Magnification = 0.4

Answer:

shushhhgggvvv vgfxgh

Explanation:

gey laahhg

Answer:

[tex]f = m \frac{v1 - v2}{t} \\ = 120 \times \frac{25 - 5}{2} \\ = 120 \times \frac{20}{2} \\ = 120 \times 10 \\ = 1200N \\ thank \: you[/tex]

Answer:

10 litres.

Explanation:

The air fuel ratio for aircraft is 12:1. It is due to simplicity piper archer is equipped with continuous flow injection system. There is a fuel sensing is Piper Archer which informs the pilot about the low fuel when the fuel level reaches to as low as 10 litres only in the tank. The yellow low furl light will illuminate to alert the pilot.

Answer:

345 K

Explanation:

Temperature can be defined as a measure of the degree of coldness or hotness of a physical object.

Generally, it is measured with a thermometer and its units are Celsius (°C), Kelvin (K) and Fahrenheit (°F).

Given the following data;

To convert the temperature in degree Celsius to Kelvin, we would use the following mathematical expression;

Kelvin = 273 + °C

Substituting into the formula, we have;

Kelvin = 273 + 72

Kelvin = 345 K

Therefore, the temperature of 72°C will be equivalent to 345 K on the Kelvin scale.

Answer: frequency 137.5

Time period 0.01sec

Explanation:

Answer:

10 pa

Explanation:

4kg* 10 (or 9.8m/s2) = 40

40N /4m2 =10

Answer:

65000g

24.325 hrs

7500m

Answer:

I) 65000 g   II)24.325 hours  III)7500 m

Explanation:

I) 1 kg = 1000 g

65 kg = 65 * 1000 g = 65000 g

II) 1 hour = 3600 seconds

1 second = 1/3600 hours

87570 seconds = 87570 * 1/3600 hours =24.325 hours

III) 1 km = 1000 m

7.5 km = 7.5 * 1000 m = 7500 m

Answer:

products would appear after the raw materials

Explanation:

raw material + raw material = product (anything deriving from combining two materials)

Answer:

I = 30 A.

Explanation:

Given that,

The voltage of the battery, V = 230 V

Power used to charge the battery, P = 6.9 kW

We need to find the current used to charge the battery. The formula for the power is given by :

P = VI

Where

I is current

So,

So, the required current is 30 A.

After half of a revolution ...

==> Distance = π•r

==> Displacement = 2•r

Answer:

the force of resistance on the right team is 360 N

Explanation:

Given;

force of the left team, = 1000 N

total mass of the right team, m = 300 kg

acceleration of the right team, a = 1.2 m/s²

The force of resistance of the right team is calculated as;

Force = mass x acceleration

Force, F = 300 x 1.2

Force = 360 N

Therefore, the force of resistance on the right team is 360 N