61. Which sample has the largest mass? A) 1 mole of marshmallows B) 1 mole of Pb atoms C) 1 mole of CO2 molecules D) All of these have the same mass

Answer:

Relationship: The Pressure on an Area and the Force Acting Perpendicularly to the Area. The pressure, , on an area, , is given by = , where is the force acting perpendicularly to all the sides of the area

Answer:

If one is analyzing a solution, for the best accuracy, the volume of titrant used should fall in the upper range of the burette that delivers the titrant. If one is using a 50 ml burette, one would like the volume to fall in maybe the 30 to 45 ml range. If on the first trial, the volume of titrant used is only a few ml, then a larger volume of solution being analyzed should be taken. If the volume of titrant exceeds 50 ml, then a smaller volume of solution should be taken. One should not need three trials. Based on the first trial, one should be able to determine the optimum volume of solution to be analyzed. If one is lucky, the optimum amount may occur on the first trial.

4ml of NaOH is required for neutralization of KHP.

The chemical reaction is as follows:

NaOH + КНР → NaKP + H₂O

The mass of KHP used is 0.1509g, Molar mass of KHP is 204.29g/mol

Then moles of KHP used are given by

Moles of KHP used = 0.1509/204.29

Moles of KHP = 7.35 x 10⁻⁴ moles

The molarity of NaOH is 0.2 M Let the volume of NaOH required for neutralization be V.

Moles of NaOH needed = Molarity x volume of NaOH (L)

                                        = 0.2 x V

As 1 mole of NaOH requires 1 mole of KHP, then

Moles of NaOH required = Molarity of NaOH x volume of NaOH (L)

On substituting the values we get,

0.2 V = 7.35×10⁻⁴

V = 7.35x10⁻⁴/0.2

    = 3.675 X 10⁻³L

V = 3.675 mL

    ≈ 4mL

Therefore, 4 ml of NaOH is required for neutralization.

To know more about neutralization, click below:

https://brainly.com/question/23008798

#SPJ4

12 moles O2 is a possible way to describe the elemental oxygen component in the reaction.

Define elemental oxygen form?

At normal temperatures and pressures, elemental oxygen is present as a gas, most frequently in the form of O2. This crucial ingredient, which is a crucial part of cellular respiration, is required for life on this planet.

This oxidation-reduction (redox) reaction is taking place:

8 S - 48 e- → 8 S (oxidation)

24 O + 48 e- → 24 O- (reduction)

O2 is an oxidizing agent, whereas S8 is a reducing agent.

Because each substance contains a huge number of atoms and molecules, we use the mole (mol) to express the amount of substances in chemistry. For the researcher who discovered how many atoms there are in 12 grams of carbon, the value provided, 6.022 x 1023 is known as Avogadro's number.

To know more about mole use link below:

https://brainly.com/question/15356425

#SPJ1

The 5.76 grams of MgBr₂ produced from the reaction of bromine and magnesium.

Balanced chemical equation

Mg + Br₂ ⇒MgBr₂

Number of moles of Mg and Br₂ present

n(Mg) = 1/24.3 = 0.0412 mol

n(Br₂) = 5/159.8 = 0.0313 mol

Checking the limiting reagent in the reaction.

Magnesium and Bromine react in 1:1 ratio

Then Limiting reagent will be bromine. The values of bromine will be used to calculate amount of magnesium bromide(Molar mass =5.76g).

0.0313 x 184.1 = 5.76 grams.

Hence, 0.0313 mole of bromine will produce 5.76 grams of magnesium bromide.

To know more about Limiting reagent.

https://brainly.com/question/11848702

#SPJ4

The 3' end of a strand of DNA contains a hydroxide group extending from the 3rd carbon of the sugar molecule.

The 3' and 5' ends of DNA molecules are referred to as the phosphate-sugar backbone of the molecule. The 3' end of the DNA is composed of a phosphate group and a deoxyribose sugar. The 5' end of the molecule is composed of a phosphate group and a ribose sugar. Both the 3' and 5' ends are connected by a covalent bond between the phosphate group and the sugar.

The 3' end of the DNA molecule is known as the "tail" or "tail end" because it is the end of the molecule that is furthest away from the double helix structure.

The 3' end is also referred to as the "hydroxyl end" because it contains a hydroxyl group. This hydroxyl group is important for certain metabolic processes such as DNA replication and transcription.

The 5' end of the DNA molecule is known as the "head" or "head end" because it is the end of the molecule that is closest to the double helix structure.

The 5' end is also referred to as the "phosphate end" because it contains a phosphate group. This phosphate group is important for certain metabolic processes such as DNA replication and transcription.

To know more about DNA translation, click below:

https://brainly.com/question/22595845

#SPJ4

Caffeine is a water soluble molecule, so it would be expected to be soluble in an aqueous medium.

What is Caffeine?
In the methylxanthine class of stimulants, caffeine is a central nervous (CNS) stimulant. As a cognitive enhancer that improves alertness and attentional performance, it is primarily used recreationally. By preventing adenosine from binding to the adenosine A1 receptor, caffeine increases the release of the neurotransmitters acetylcholine. Caffeine can bind to and block adenosine receptors because of adenosine's similar three-dimensional structure. Additionally, caffeine raises levels of cyclic AMP by nonselectively inhibiting phosphodiesterase. The methylxanthine alkaloid caffeine is an angry, white crystalline purine that shares chemical similarities with the adenine as well as guanine bases of ribonucleic acid and deoxyribonucleic acid (DNA) (RNA).

Phosphoric acid is added to Coca-Cola to give it a tart flavor and to act as a preservative. It also helps to dissolve other ingredients, such as caffeine, which might otherwise be insoluble in the beverage.

To learn more about Caffeine
https://brainly.com/question/29490332
#SPJ4

Answer:

electron- neutron- nucleus- atom- solution compound

Explanation:

Any of the series of unsaturated hydrocarbons containing a double bond, including ethylene and propylene are called Alkenes.

What are Unsaturated Hydrocarbons?

Unsaturated hydrocarbons are organic compounds that contain one or more double or triple bonds between carbon atoms. They are also known as alkenes or alkynes depending on the number of double bonds present. Examples of unsaturated hydrocarbons include ethene (C2H4), propene (C3H6) and butadiene (C4H6).

Define Alkenes?

Alkenes are a class of hydrocarbons that contain a carbon-carbon double bond. They are also known as olefins or unsaturated hydrocarbons. Alkenes are used in the production of polymers, fuels, lubricants, and solvents.

To know more about Alkenes,

https://brainly.com/question/12759803

#SPJ4

Answer:

A test variable is a user-defined, name-value pair that stores and refers to information throughout a test and between tests.

Provide a default value to the variable during declaration.

Change the value of the variable using Set Variable statement. You can use the Add and Insert menus of the Test Editor to create Set Variable statements.

Set hard-coded value or value retried from a data source, such as dataset or reference that appears before the Set statement to the variable.

If a variable is initialized at various places such as test, compound test, schedule, or user group, the product uses the following order to initialize the value of the variable when running the test. The variable set in the variable table of the compound test editor takes the highest precedence followed by others:

Compound test setting in the variable table UI

Compound test specified in a var file

User group setting in the variable table UI

User group specified in a var file

Schedule specified setting in the variable table UI

Schedule specified in a var file

Command line

Outcome variables are usually the dependent variables which are observed and measured by changing independent variables. These variables determine the effect of the cause (independent) variables when changed for different values. The dependent variables are the outcomes of the experiments determining what was caused or what changed as a result of the study.

For a simple example, the marks a student obtains in an exam is a result of the hard word measured in the number of hours put behind studying and the intelligence measured in IQ are the independent variables. The marks obtained thus represents the dependent or outcome variable. When the values of the independent variables are changed, the marks may or may not change and hence dependent variables are dependent on the independent variables while the opposite is implausible i.e., when the marks are changed, it doesn’t change the number of hours of study or the IQ of the student.

The response variable is also called as the dependent variable because it depends on the causal factor, the independent variable. Depending on the various input values of the experimental variables, the responses are recorded.

Answer:

Purines make up two of the four nucleobases in DNA and RNA: adenine and guanine and Pyramidines make up the other bases in DNA and RNA: cytosine, thymine.

Explanation:

Pyrimidines are heterocyclic compounds with  single  rings whereas purines are heterocyclic compounds with fused  ring. Among the given nitrogen bases, adenine is purine  and cytosine and thymine are pyrimidines .

In DNA molecule, the two strands are connected together like a stair case with steps. The steps here are called nitrogen bases. There are 4 different types of nitrogen bases in DNA molecules.

The nitrogen bases are namely, adenine, guanine, cytosine and thymine. The adenine of one strand is bonded to thymine of the other strand through 2 hydrogen bonds. Whereas, cytosine and guanine are connected by three hydrogen bonds.

Adenine and guanine are purine bases and thymine and cytosine are pyrimidine bases. The fused heterocyclic rings with an imidazole ring is called purines. Single ring heterocyclic bases are the pyrimidines.

Find more on nitrogen bases:

https://brainly.com/question/35140

#SPJ2

Your question is incomplete. But your complete question is as follows:

classify each molecule as a purine or a pyrimidine.

adenine

cytosine

thymine

Answer:

36 electrons

Explanation:

The dissociation equations are shown as;

a) [tex]HCl ------ > H^+ + Cl^-[/tex]

b) [tex]H C_{2} H_{3}O_{2} ---- > C_{2} H_{3}O_{2} ^- +H^+[/tex]

C) [tex]NH_{4} ----- > NH_{3} + H^+[/tex]

D) [tex]C_{6} H_{5} NH_{3} ^+ ------- > C_{6} H_{5} NH_{2} + H^+[/tex]

E) [tex][Al(H_{2} O)_6}] ^{3+} ------ > Al^{3+}[/tex]

The term dissociation has to do with the procedure by which a substance can be broken up into its components. The components of a substance are those that have to come together so as to form the compound.

When the compound is to be broken up, the components that came together to make up the compound can broken up and then we have the original compounds tat we have at the start of the reaction.  In this case, the decomposition equations have been shown with the exclusion of water.

Learn more about dissociation:https://brainly.com/question/28952043

#SPJ1

Thr IUPAC or systematic name for the compound given from the task above is an organic compound known as undecane.

Organic compounds simply refers to those groups of chemical substances which contains carbon and hydrogen. All organics substances within their respective homologous families has the same general characteristics. From the task given above, it contains 11 carbons atoms which is bonded to 24 hydrogen atoms. That is, why the systematic name of the compound C11H24 is undecane.

Homologous series is a family of organic compound which follows a regular pattern and in which successive members differs from one another by the molecular formula of CH₂. Below are some classes of homologous families:

In conclusion, the compund CCC(C)CC(C)C(C)CC given in the problem above belongs to an alkane family.

Read more on systematic names:

https://brainly.com/question/2310859

#SPJ1

The electronic configuration of

Helium is - 1s2,

Neon is [He]2s²2p⁶

Argon is 1s²2s²2p⁶ or Ne 3s² 3p⁶

The common characteristic is that their outermost shells are filled making them noble gases.

We can define the electronic configuration as the distribution of electrons of an atom or molecule in molecular orbitals.

Helium has 2 electrons in its  atomic number is 2  

Neon has 2,8 electrons in its shell atomic number 10.

Argon has 2,8,8 electrons in its shell and atomic number 18  Argon electron configuration will be 1s²2s²2p6  It is called a noble gas.

They do not react with other elements because their electronic shells are filled completing their octet configuration, and are stable and inert. They are called noble or inert gases.

To know more about electronic configuration visit:

https://brainly.com/question/14283892

#SPJ1

The length and width of the swimming pool is 23.08.

What is length?

The term "length" refers to a measurement along an object's largest dimension. A portion of space, or volume, is occupied by a sample of material. Volume of an object can be determined by knowing the length of each side.

What is height?

The vertical distance between an object's top and bottom or its base and something above it is what is meant by the terms height, altitude, and elevation. Height is a vertical measurement, whether or not something is high.

2*6=4800

12=6400

=533^

=23.08

Therefore, the length and width of the swimming pool is 23.08.

Learn more about length from the given link.

https://brainly.com/question/1597347

#SPJ4

Answer:

1. an electron moving around the nucleus

2. an electron moving on its axis

Explanation:

The best way to remember how atoms move is by comparing them to a solar system. Just like a solar system atoms have a core, in this case the nucleus, and each atom rotates around the nucleus just like planets revolve around a star. They also rotate just like a plant does.

Peroxidase activity increases and then decreases due to a change from a moderately acidic environment (pH near 6) to a basic environment.

Peroxidase is an enzyme found in a wide variety of organisms, from plants to humans to bacteria. Its function is to decompose hydrogen peroxide (H₂O₂). Hydrogen peroxide is one of the toxins produced as a by-product of using oxygen to breathe. (The fact that hydrogen peroxide is toxic makes it useful in first aid kits.

Peroxidase activity is strongly influenced by pH factors. Peroxidase works best at pH 7, but increasing or decreasing pH adversely affects its activity. Therefore, when moving from a weakly acidic environment close to pH 6 to a basic one, the peroxidase activity increases as the neutral environment approaches and decreases as the basic environment approaches, so that the peroxidase activity varies with the pH of the solution.

To know more about peroxidase, visit:

https://brainly.com/question/14870911

#SPJ1

The complete question is as follows:

Researchers investigated the influence of environmental pH on the activity of peroxidase, an enzyme that catalyzes the conversion of hydrogen peroxide to water and oxygen gas. In an experiment, the researchers added a hydrogen peroxide solution containing guaiacol to several identical test tubes and adjusted the solution in each test tube to a different pH . The researchers included the guaiacol because it caused the solutions to change color as the reactions proceeded, which the researchers relied on for measuring reaction rates. Finally, the researchers added the same amount of peroxidase to each test tube and measured the rate of each reaction at 23°C . The results of the experiment are represented in Figure 1.

Based on Figure 1, which of the following statements best predicts the effect that a change from a moderately acidic environment ( pH near 6) to a basic environment will have on peroxidase activity?

answer choices

Peroxidase activity will decrease.

Peroxidase activity will increase.

Peroxidase activity will stay the same.

Peroxidase activity will increase at first and then decrease.

We use the MO diagram for a homonuclear diatomic species (since C and N are neighbours, we treat them as the "same").

The first two electrons contribute to bonding. The next two are anti-bonding.

The next six contribute to bonding, and the following six are anti-bonding.

So, if we start with CN+, which has 4+5-1 (8) valence electrons, we note that the first two electrons contribute to bonding, while the next two cancel this out; the next four contribute to bonding, so the bond order is 4/2 = 2.

If we add one more electron to get CN, there are now 5 bonding electrons, giving bond order 5/2=2.5.

Adding one more to give CN- would give the bond order 6/2 = 3. (If we added more electrons, each one would lower the bond order.)

Given a series of molecules with identical skeletal structures, the one with the highest bond order has the highest bond energy:

CN+ < CN < CN-

Lewis structures will verify that CN- has a triple bond, but they do not work particularly well for CN+ and CN.

learn more about bond orders at

https://brainly.com/question/9713842

#SPJ1

(a) Rate of reaction = 13.33 dm³/min.

(b) Assuming magnesium is the limiting reagent:

Reaction rate or rate of reaction is the rate at which a chemical reaction occurs and is defined as proportional to the increase in concentration of products per unit time and the decrease in concentration of reactants per unit time. Reaction rates can change dramatically.

Rate of reaction = Volume change/time

At 1.5 minutes volume of 20 dm³ H₂

So rate will be:

20/1.5 = 13.33 dm³/min.

Mg(s) + 2HCl(aq) → MgCl₂(aq) + H₂(g)

For moles of H₂:

n = M × V

Where, n = number of moles

M = Molarity (1.00 mol/dm³)

V = Volume (20 dm³)

n = 1.00 × 20

n = 20 moles

Since the mole ratio of Mg and H₂ is 1:1, the moles of Mg are 20 moles.

m = n × Mm

Where, m = mass

n = number of moles (20 moles)

Mm = molar mass of Mg (24.30 g/mol)

m = 20 × 24.30

m = 486 g

Powders react faster than blocks - they have a larger surface area and reactions occur on the surface, so they are faster.

To know more about rate of reaction, visit:

https://brainly.com/question/13440548

#SPJ1

The complete question is as follows:

The graph below shows the volume of hydrogen evolved against time for the reaction of a piece of solid magnesium metal with 1.00 mol dm-3 hydrochloric acid, HCl(aq). Mg(s) + 2HCl(aq) → MgCl2(aq) + H2(g) (a) Deduce the rate of the reaction at time t = 1.5 minutes. (i) Assuming magnesium is the limiting reagent and the gas was collected at STP (i) Calculate the mass of the piece of magnesium metal used. (ii) Describe how the graph would have looked if the magnesium metal had been in powdered form.

The arrangement of the elements from smallest atomic radius to largest atomic radius is S < Se < Na < K

The atomic radius of an element is a measure of the size of the atom of an element.

The atomic radius of an element is calculated as one-half the distance between the nuclei of two covalently bonded atoms of the element. Atomic radius is one of the properties of an atom that show periodicity.

The periodicity of elements is the regular variation of the properties of an element across a period and down a group.

The atomic radius of atoms of elements increases down the group and decreases across a period.

Considering the atomic radius of the given element:

Learn more about atomic radius at: https://brainly.com/question/13126562

#SPJ1

The formation of molecule can easily be shown by drawing Lewis dot structure. Since atom's Lewis dot structure has three dots. Therefore, the valence electron around Iodine is 7, out of 7 electron, 5 electron will make single bond with one electron of chlorine.

Lewis dot structure is a way to represent the valence electron of an element in the form of dot.

These are mainly beneficial in understanding the chemical formula of covalent compound. The valence electron around Iodine is 7, out of 7 electron, 5 electron will make single bond with one electron of chlorine.

Therefore, the valence electron around Iodine is 7, out of 7 electron, 5 electron will make single bond with one electron of chlorine.

To learn more about Lewis dot structure, here:

https://brainly.com/question/20300458

#SPJ1

The percentage yield of the given reaction is 77.33%.

What is percentage yield?
Reactants frequently produce fewer product quantities than predicted by the chemical reaction's formula. The percentage of a theoretical yield that's been produced in a reaction is calculated using the percent yield formula. Working through a stoichiometry problem yields the theoretical yield, which is the ideal quantity of the final product. The actual yield is determined by calculating the volume of the product formed. We can determine the percentage yield by dividing the actual yield by the theoretical yield.

Moles is calculated by using the formula:
Moles of Ammonia:
Given mass of ammonia = 150g
Molar mass of ammonia = 17 g/mol
Putting values in above equation, we get:

Moles of Oxygen
Given mass of oxygen = 150g
Molar mass of oxygen = 32 g/mol
Putting values in above equation, we get:
For the given chemical equation:

By Stoichiometry,
5 moles of oxygen reacts with 4 moles of ammonia.
So, 4.6875 moles of oxygen will react with =  of ammonia
As, moles of ammonia required is less than the calculated moles. Hence, ammonia is present in excess and is termed as excess reagent.
Therefore, oxygen is considered as a limiting reagent because it limits the formation of products.

By Stoichiometry of the given reaction:
5 moles of oxygen gas produces 4 moles of nitric oxide
So, 4.6875 moles of oxygen gas will produce =  of nitric oxide

Now, to calculate the theoretical amount of nitric oxide, we use equation 1: Molar mass of nitric oxide = 30 g/mol
 Given mass of nitric oxide = 112.5 g
Now, to calculate the percentage yield, we use the formula:
Experimental yield = 87 g
Theoretical yield = 112.5 g
Putting values in above equation, we get:
Hence, the percentage yield of the given reaction is 77.33%.

learn more about percentage yield
https://brainly.com/question/14714924
#SPJ4

Answer:

The nucleus

Explanation: bohr tells us that the electrons which have a negative charge clicle the orbits in specific nucleus

The bond length order becomes: CO < CO₂ < CO₃⁻².

The total amount of covalent bonds that two atoms have together. A single bond exists when two atoms share one pair of electrons (bond order = 1). Two pairs of electrons make up a double bond (bond order = 2), whereas three pairs of electrons form a triple bond (bond order = 3).

CO has triple bond.

CO₂ has double bond and

CO₃⁻² has a nature in between double and triple bond.

Thus, the bond length order becomes: CO < CO₂ < CO₃⁻².

As, we all know, bond order has an inverse relationship with bond length. That is, longer bonds are stronger bonds. CO has a bond order of 3 (triple bond), CO₂  has a bond order of 4 (two double bonds), and CO₃⁻² has a bond order of 1.33. ( bond nature between single and double bonds). That's why CO₃⁻² have a longer bond length than CO₂.

To know more about bond order refer to:

https://brainly.com/question/9713842

#SPJ1

The skeletal line-bond structure of (r)-1-ethyl-3-ethynyl-cyclohex-1-ene is as follows:

A disubstituted cyclohexene molecule contains an ethyl group on C1 and an ethynyl group on C3.

To represent the dash or wedge bond structure we have to first identify the asymmetric centers in the molecule.

An organic compound's skeletal structure was made up of a group of atoms that also are joined together to form the compound's fundamental structure. Chains, branches, and/or rings of bound atoms can make up the skeleton. Heteroatoms were skeletal atoms that are not carbon as well as hydrogen.

The asymmetric center in the cyclohexene molecule is C-3 in the cyclohexene so the dash and wedge structure can also be shown as follows:

To know more about (r)-1-ethyl-3-ethynyl-cyclohex-1-ene , click here  

https://brainly.com/question/2400746

#SPJ4

9-88 An easy goal Air with a maximum and minimum temperature od 27°C and 727°C is used in the Brayton cycle.

A thermodynamic cycle called the Brayton cycle is employed in various heat engines. In particular, several jet engines and gas turbine engines utilise it. The cycle entails compressing outside air, combining it with fuel, and then lighting the resulting mixture, which expands and generates power.

The thermodynamic cycle types Occur in order and Brayton cycle both exist. The main distinction between the Rankine cycle and the Sco2 cycle is that the former is a cycle of vapour, while the latter is a cycle of vapour and liquid phases.

To know more about brayton cycle visit:

https://brainly.com/question/28232829

#SPJ4

Buffer is a solution used to stabilize the pH (acidity) of a liquid.

A buffer system in chemistry is a type of solution that is able to resist changes in its pH when small amounts of an acidic or basic substance is added to it.

Many chemical reactions are carried out at a constant pH. In nature, there are many systems that use buffering for pH regulation

According to this question, a buffer system of hydrofluoric acid, HF, and its salt is given. The purpose of the buffer system is to stabilise the pH of the hydrofluoric acid solution.

Also, hydroxide ion (OH) can be added to the solution to neutralise the acid content of the solution as characterized by the presence of hydronium ions (H₃O⁺).

Learn more about buffer at: https://brainly.com/question/22821585

#SPJ1

Answer:

The demonstration involving plastic containers and food coloring was very memorable. This experiment helped me understand the concept of diffusion, which is the process by which molecules move from an area of higher concentration to a place of lower concentration. For example, this experiment showed me how the food coloring molecules move from the container with more food coloring to the container with less food coloring until the attention of food coloring is equal in both containers. This helped me understand how diffusion works in real-life.

Explanation:

Answer:

It is attached below.

Explanation:

The Lewis structure for H₃NO, also known as ammonia oxide or nitroxyl is given in the image.

Count the total number of valence electrons:

Hydrogen (H) has 1 valence electron.

Nitrogen (N) has 5 valence electrons.

Oxygen (O) has 6 valence electrons.

Total valence electrons = (3 × 1) + 5 + 6 = 14

Determine the central atom:

In this case, nitrogen (N) is the central atom, as it is less electronegative than oxygen (O) and hydrogen (H).

Connect the atoms with single bonds:

Place a single bond (represented by a line) between nitrogen (N) and each hydrogen (H). This accounts for 3 electrons.

Distribute the remaining electrons:

Place the remaining 11 electrons as lone pairs around the atoms to satisfy the octet rule. In this case, nitrogen (N) will have a lone pair, and oxygen (O) will have a lone pair.
Each line represents a single bond, and the lone pairs are represented by pairs of dots or dashes. The hydrogen atoms are bonded to the nitrogen atom, and the oxygen atom has a lone pair.

Hence, the Lewis structure is in the image.

Learn more about Lewis structure here:

https://brainly.com/question/4144781

#SPJ 6