Answer: I don’t understand what your asking elaborate more
Explanation:
PLEASEEEE HELPP
If 359 mL of a gas were contracted to only 269 mL, what would be the initial temperature of it if it measured 422 K after the change?
I NEED IT FAST!!
Answer:
T₁ = 563.19 K
Explanation:
Given data:
Initial volume = 359 mL
Final volume = 269 mL
Final temperature = 422 K
Initial temperature = ?
Solution:
The given problem will be solve through the Charles Law.
Charles Law:
According to this law, The volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure.
Mathematical expression:
V₁/T₁ = V₂/T₂
V₁ = Initial volume
T₁ = Initial temperature
V₂ = Final volume
T₂ = Final temperature
Now we will put the values in formula.
V₁/T₁ = V₂/T₂
T₁ = V₁T₂ / V₂
T₁ = 359 mL × 422 K / 269 mL
T₁ = 151498 mL.K / 269 mL
T₁ = 563.19 K
pls answer i need it now!! I will give brainliest to the best answer!!
Answer:
sample 2
Explanation:
hope this helps
Why the microscope is made an inclination joint?
Answer:
inclination joint This is the joint between the pillar and the arm of the microscope. It is used to tilt the body tube and stage. It is usually best to keep the stage horizontal.
Explanation:
3. A property of acids is that they taste sour. A
property of bases is that they feel slippery. Would
you use either of these properties to identify an
unknown substance? Why or why not?
Explanation:
Touching or tasting these unknown substances could be lethal or cause severe burns to your skin, so it is advisable to use other methods to identify substances.
Approximately how long does it take for the moon's phases to change from a NEW moon to a FULL moon?
1 week
3 weeks
2 weeks
4 weeks
Answer:
4 weeks
Explanation:
It takes 4 weeks for the cyclle to be happening again
Which products would form if chlorine gas was bubbled through a solution of sodium bromide?
a. Na and BrCl
b. Na snd BrCl2
c. Na and Br2
d. Na(cl)2 and Br2
Answer:
NaCl and Br2
Explanation:
Edge 2020
Answer:
The Answer is C: Na and Br3
Explanation:
- Is energy absorbed or released by a material during the phase change from a solid to a liquid?
A)Absorbed
B)Released
Answer:
A) Abosrbed
Explanation:
The change is endothermic, meaning the material absorbs energy when it changes its phase from a solid to a liqiud.
0.2 moles of aluminum has a mass of 5.4 g. what is The molar mass of aluminum
Answer:
Molar mass = 27 g/mol
Explanation:
Given data;
Number of moles of Al = 0.2 mol
Mass of Al = 5.4 g
Molar mass of Al = ?
Solution:
Formula:
Number of moles = mass/molar mass
By putting values,
0.2 mol = 5.4 g/ molar mass
Molar mass = 5.4 g/ 0.2 mol
Molar mass = 27 g/mol
The electrical charge of the nucleus is determined by:
a. the number of neutrons only
b. the number of protons and neutrons together
c. the number of protons only
d. the number of electron only
A sample of methane gas collcted t a pressure of 0.0884 atm and a temperature of 6.00 C is found to occupy a volume of 26.5 L. How many moles of CH4 gas are in the sample? ____ mol
Answer:
0.1mole
Explanation:
Given parameters:
Pressure = 0.0884atm
Temperature = 6°C = 6 + 273 = 279K
Volume occupied = 26.5L
Unknown:
Number of moles = ?
Solution:
To solve this problem, we are going to use the ideal gas equation:
PV = nRT
P is the pressure
V is the volume
n is the number of moles
R is the gas constant = 0.082atmLmol⁻¹k⁻¹
T is the temperature.
Insert the parameters and solve for n;
0.084 x 26.5 = n x 0.082 x 279
n = 0.1mole
How can you ensure the chemical reaction produces the right amount of heat in a hot pack without hurting you?
Answer:
Heat packs that contain iron and water packets: Exposing the solution to air results in the oxidation of the iron (creates rust). The oxidation of the iron is an exothermic process. Heat packs that contain supersaturated sodium acetate: These are reusable, the packs are boiled to dissolve sodium acetate.
Explanation:Thanks for asking question
Rift valleys can form when fractures in Earth's crust widen. The valley walls slowly move apart at a rate of only a few millimeters a year.
Which type of boundary would rift valleys form at?
A. Convergent
B. Divergent
C. Transform
D. Transform Fault
Answer:
B. Divergent
Explanation:
Rift valleys are usually formed at divergent margins where fractures in the earth's crust widens.
The fracture widens due the pulling apart of the plates that are involved.
Most rift valleys are located within the continental crust. One of the prominent rift margins in the world is the East Africa rift valley system. This creates a crack within the earth that continues to grow as the separation continues.Differentiate between worldwide conservation and national conservation policy.
the first stage of an blank is when clouds form; this is the cumulus stage
Answer:
thunderstorm
Explanation: The cumulus stage is the first stage in a thunderstorm and it involves clouds forming. We see the cloud that will become a thunderstorm as it is starting to form and grow. This is due to the rising levels of thermal energy.
Turning on your X-Box is an example of___ energy turning into ___ energy.
A.electrical,nuclear
B.nuclear,sound
C.electrical,light
D.electrical,chemical
Answer:
electrical --> light
Explanation:
What is formed when polyatomic ions bond with other ions?
It would be Ionic Compounds.
Natural Causes of Climate Change:
Pick one cause of natural climate change. Explain what it is and how
it causes dimate change. What is the effect of the climate change?
Helpp plzzz
Answer:
cause of climate change: The earth's climate is affected and changed through a lot of natural causes like volcanic eruptions.
how it causes change: Volcanoes can be extremely dangerous to earth because it can impact climate change. During major explosive eruptions huge amounts of volcanic gas, aerosol droplets, and ash are injected into the stratosphere.
what is the effect of the change: Major eruptions alter the Earth's radiative balance because volcanic aerosol clouds absorb terrestrial radiation, and scatter a significant amount of the incoming solar radiation, an effect known as "radiative forcing" that can last from two to three years following a volcanic eruption.
i hope you get it correct!! <3 can i plz get a brainlest!
Observe the image of sodium. List the properties you see.
Answer:
It is soft and white. It has a low melting and boiling point, a good conductor electricity, and reacts with water. Furthermore, it is also highly reactive, malleable, and ductile.
Explanation:
Hope I helped!
Answer:
silvery-white and waxy
Explanation:
Properties means the observations you can make just by looking at it or the qualities that the object has.
So when I looked at the sodium I saw a silvery-white metal (sodium is a metal), that has this waxy appearance to it.
Help Please with this
MULTIPLE CHOICE QUESTION
Electrons fill in energy levels in which of the
following ways?
1.Lowest energy level first, so it fills in the inside
rings first
2.Lowest energy level first, so it fills in the
outside rings first
3.Highest energy level first, so it fills in the inside
rings first
4.Highest energy level first, so it fills in the outside
rings first
Answer:
I think the answer is 3. Highest energy level first, so it fills in the inside rings first
Electrons occupy the lower-energy orbitals first, then go on to fill the next higher-energy orbital until all of the electrons contain been placed.
Which energy levels do electrons fill first?Most of the time, electrons occupy the lower-energy orbitals first, then go on to fill the next higher-energy orbital until all of the electrons have been positioned.
The lowest energy level is always added to initially until it has as many electrons as it can have. The following higher energy level is then filled with electrons, and so on.
The lowest energy level is always filled up with additional electrons first, up to the point where that level can hold no more, and then further electrons are added to the next higher energy level, and so on. A level's total number of orbitals determines how many electrons can be present at that energy.
Therefore, the correct answer is option 3. Highest energy level first, so it fills in the inside rings first.
To learn more about Electrons refer to:
https://brainly.com/question/860094
#SPJ2
I neeeeeeeeed help you within 30 min
Answer:
The answers to your question are given below
Explanation:
The equation for the reaction is given below:
2KClO₃ —> 2KCl + 3O₂
The total number of each atoms present in the reactants and products can be obtained by doing a head count as illustrated below:
Reactants >>>>>> Number of atoms
Potassium (K) >>> 2 × 1 = 2
Chlorine (Cl) >>>> 2 × 1 = 2
Oxygen (O) >>>>> 2 × 3 = 6
Products >>>>>>> Number of atoms
Potassium (K) >>> 2 × 1 = 2
Chlorine (Cl) >>>> 2 × 1 = 2
Oxygen (O) >>>>> 3 × 2 = 6
Can someone help
Me out pls if your good at chemistry
Please help me with this question
Thank you!
Answer:
B. 3+
Explanation:
When Fe²⁺ loses an electron, it becomes an Fe³⁺ ion.
The loss of an electron in an atom makes the atom becomes positively charged. Further losing electrons makes the atom more positive.
For the given ion;
Fe²⁺ if it loses an electron more, it becomes Fe³⁺.
The expression is given as:
Fe²⁺ → Fe³⁺ + e⁻
What is the molar mass of carbon?
what volume (in L) of ethane (C2H6) will be required to produce 42.5 L of carbon dioxide in the reaction below?
2C2H6(g)+7O2(g)->4CO2(g)+6H2O(g)
Answer:
21.25
Explanation:
the rate of effusion of co2 gas through a porous barrier is observed to be 9.31x 10^-4 mol/h. under the same conditions, the rate of effusion of N2 gas would be _______ mol/h
Answer:
[tex]1.167\times 10^{-3}\ \text{mol/h}[/tex]
Explanation:
[tex]R_1[/tex] = Rate of diffusion of [tex]CO_2[/tex] = [tex]9.31\times 10^{-4}\ \text{mol/h}[/tex]
[tex]R_2[/tex] = Rate of diffusion of [tex]N_2[/tex]
[tex]M_1[/tex] = Molar mass of [tex]CO_2[/tex] = 44.01 g/mol
[tex]M_2[/tex] = Molar mass of [tex]N_2[/tex] = 28.0134 g/mol
From Graham's law we have the relation
[tex]\dfrac{R_1}{R_2}=\sqrt{\dfrac{M_2}{M_1}}\\\Rightarrow R_2=\dfrac{R_1}{\sqrt{\dfrac{M_2}{M_1}}}\\\Rightarrow R_2=\dfrac{9.31\times 10^{-4}}{\sqrt{\dfrac{28.0134}{44.01}}}\\\Rightarrow R_2=1.167\times 10^{-3}\ \text{mol/h}[/tex]
The rate of effusion of the [tex]N_2[/tex] gas would be [tex]1.167\times 10^{-3}\ \text{mol/h}[/tex].
pleas HELP QUICK!!!!!!!!!!!!!!!!!
Answer: first is last second is first and 3rd is second
Explanation:
what elements comprise the largest portion of Earth's atmosphere?
Answer:
Nitrogen and Oxygen make up 99% of the Earths atmosphere. Then Argon makes up the rest of the atmosphere.
Volcanic islands can form over hot spots. The Hawaiian Islands started forming over hot spots in the Pacific Ocean millions of years ago. What process causes the hot, solid rock to rise through the mantle at these locations?
Answer: Convection Currents
Explanation:
Due to the different temperature occurring at the upper and lower layers of the mantle, it causes heat transfer to occur. One of such heat transfer is the Convection currents which causes warmer, less dense rock material in the core to rise through the mantle. Also, the cooler rocks in the higher mantle move slowly towards the core.The movement caused by these Convection current in the Earth are called plate tectonics which are responsible for earthquakes and volcanoes.
How many grams of K2Cr2O7, are soluble in 100 g of
water at 95 °C?
Answer:
75 grams
Explanation:
At 95 °C, you can dissolve up to 75 grams of K2Cr2O7 in 100 mL of water.
What is solubility?The solubility of a substance in a particular solvent is the maximum amount of that substance that can dissolve in the solvent at a given temperature. The solubility of a substance can be affected by factors such as temperature, pressure, and the presence of other substances.
For K2Cr2O7, the solubility in water is highly dependent on temperature. At 95 °C, the solubility of K2Cr2O7 in water is approximately 75 g/100 mL. This means that at 95 °C, you can dissolve up to 75 grams of K2Cr2O7 in 100 mL of water. Since 100 g of water is equivalent to 100 mL, you can dissolve up to 75 grams of K2Cr2O7 in 100 g of water at 95 °C.
Learn more about solubility, here:
https://brainly.com/question/28170449
#SPJ2
