I think its the substances that sublimes
How does a balanced chemical equation represent the conservation of
matter in a chemical reaction?
1. There are more atoms in the reactants than in the products.
2. The type of matter in the products is different from the type of matter in
the reactants.
3. The number of atoms of each element in the reactants equals the number
of atoms of each element in the products.
4. There are fewer atoms in the reactants than in the products
Answer:
The correct answer would be 3. The number of atoms of each element in the reactants equals the number of atoms of each element in the products.
Explanation:
The law of conservation of matter states that energy cannot be created or destroyed, only transfered. Thus, option 3 is correct.
best way to separate a solid from a liquid what separation technique is needed
Answer:
Filtiration technique
Explanation:
The levels of carbon dioxide in the atmosphere a. began decreasing when the burning of fossil fuels increased. b. are estimated to be higher than at any time in the past 420,000 years. c. are high but not higher than the highest estimated levels in the last 420,000 years. d. peaked around 1950 and have begun slowly decreasing since then.
The levels of carbon dioxide in the atmosphere are estimated to be higher than at any time in the past 420,000 years. That is option B
Carbon dioxide is a very harmful compound which is easily released into the atmosphere through burning of fossil fuels and other carbon compounds in plenty of air.
The released carbon dioxide rises to the upper atmosphere and blocks the radiation of solar energy back into the space. This precipitates a global temperature increase called the greenhouse effect.
According to Intergovernmental Panel on Climate Change (IPCC) in a current research discovered that CO2 concentration in the earth’s atmosphere is higher than at any point during the last 650,000 years. They where able to study this through the study of higher levels of CO2 concentration which coincide with higher temperatures.
Therefore the correct option is B which states that the levels of carbon dioxde in the atmosphere are estimated to be higher than at any time in the past 420,000 years.
Learn more here:
https://brainly.com/question/1428582
HELLPP ASAP, FIRST PERSON WITH THE CORRECT ANSWER WILL RECEIVE BRAINLIEST
How are the number of valence electrons and the types of ions related?
Answer:
"The number of electrons in an atom's outermost valence shell governs its bonding behaviour."
Explanation:
Credits to:
https://socratic.org/questions/how-do-valence-electrons-affect-chemical-bonding
Make sure to put in your own words
Hopefully this helps
Answer:
The number of electrons in an atom's outermost valence shell governs its bonding behaviour. ... They need to lose only one or two valence electrons to form positive ions with an s²p⁶ configuration. NONMETALS. Nonmetals tend to attract additional valence electrons to form either ionic or covalent bonds.
Molar mass of C^6H^12O^6
Answer:
The molar mass of C6 H12 O6 is 180.15588 g/mol.
Explanation:
please solve this question
Answer:
b) it gets accumulated in the respiratory system which then halts or slows down the supply of oxygen to the brain hence leading to death
an atom with six protons and eight neutrons is a(n)___
a. isotope of nitrogen
b. standard carbon atom
c. isotope of carbon
d. isotope of oxygen
Answer:
standard carbon atom
Explanation:
Answer:
Explanation:
This is an isotope of carbon, more specifically, carbon-14. Carbon 14 has 6 protons, making the element carbon, and eight neutrons since 14-6 = 8.
process of heat treatment and it's meaning
Answer:
Heat treatment is the process of heating metal without letting it reach its molten, or melting, stage, and then cooling the metal in a controlled way to select desired mechanical properties. Heat treatment is used to either make metal stronger or more malleable, more resistant to abrasion or more ductile.
Which type of bonds can carbon atoms form with other carbon atoms? (1 point)
O double, triple, and quadruple bonds
O single and double bonds
O double and triple bonds
O single, double, and triple bonds
Answer:
single, double, and triple bonds
An atom has mass number 23 and atomic number 11.
a) How many electrons are revolving around the nucleus?
b) How many electron shells are there in the atom?
A): The closest orbital to the nucleus, called the 1s orbital, can hold up to two electrons. This orbital is equivalent to the innermost electron shell of the Bohr model of the atom. It is called the 1s orbital because it is spherical around the nucleus. The 1s orbital is always filled before any other orbital.
career in chemistry list ten
Answer:
Analytical Chemist
Forensics
Toxicologist
Biochemist
Chemical Engineer
Laboratory Technician
Pharmacologist
Chemical Technician
Materials Scientist
Environmental Chemist
what is mean by measurement
Answer:
Measurement is defined as the act of measuring or the size of something. An example of measurement means the use of a ruler to determine the length of a piece of paper. ... Extent, quality, or size as determined by measuring; dimension. A waist measurement of 32 inches.
Explanation:
The comparison o unknown quantity with known standard quantity is called measurement.
Al wonders if adding salt to water will affect how long it takes the water to
freeze. Al thinks that salt water will freeze more quickly than fresh water.
He decides to check his hypothesis by conducting an experiment. Al takes
two ice trays and fills one with distilled water and the other with distilled
water that has two tablespoons of salt added. He makes sure he puts
exactly the same amount of water in each ice tray. Al takes the trays and
puts them side by side in the freezer. Al checks the ice trays every 10
minutes to see if the water in each tray has begun to freeze. Al finds that
after 20 minutes the water in the ice tray without the salt has started to
form ice, while the ice tray with the salt water is still completely liquid.
Ku
The hypothesis is that salt water freezes faster than fresh water.
The dependent variable is time taken for ice to appear.
The independent variable is presence or absence of salt
The constants are the amount of water in each tray, freezing conditions and length of time of exposure to freezing condition.
The control group is the tray to which salt was not added
The experimental group is the tray to which salt was added
The presence of solutes in a solution causes the freezing point depression.
A solution is made up of a solute and a solvent. In the presence of a solute, the freezing point of a pure solvent is decreased. This is because freezing point is a colligative property.
Colligative properties depend on the amount of solute present.
Hence, the pure water freezes faster (ice begin to appear earlier) than the salt water.
The hypothesis put forward in this experiment was found to be invalid by the experiment.
For more about colligative properties, see
https://brainly.com/question/10323760
Josefina and Raul were comparing how sound moves through various mediums and how charge moves through conducting wires. They performed experiments to find out if the factors that determine the speed of sound are the same as those that determine the flow in a circuit. What did they find? Describe two things that they found. For each, explain how the speed of sound and flow of current are affected
They found that difference occurs in the speed of both sound and charges occur due to the difference in the type of medium.
Sound and charges needs specific medium for faster movement i.e. sound moves faster in solid as compared to liquid and gas whereas charges moves faster and easily in gold due to lower resistance which is followed by copper. Sound can move from solid, liquid and gases whereas charges move only in solid metal in which free electrons are present. The speed of sound and flow of current are affected due to difference in the arrangement of atoms in solid, liquid and gas.
https://brainly.com/question/24373020
The compound KOH is ________. insoluble, because all compounds containing K are insoluble insoluble, because all compounds containing OH- are in soluble soluble, because all compounds containing K are soluble soluble, because all compounds containing OH- are soluble insoluble, because KOH is insoluble
Answer:
soluble because all compounds containing K are soluble
Explanation:
Most metal hydroxides are insoluble. However, alkali metal hydroxides (such as KOH and NaOH) are very soluble.
In the case of KOH, the K cation is attracted to the electronegative oxygen on water. The OH anion is capable of hydrogen bonding to the water. (Notice how OH⁻ is simply the deprotonated form of water.)
The compound KOH is soluble insoluble, because all compounds containing K are insoluble insoluble, because all compounds containing OH- are in soluble soluble, because all compounds containing K are soluble soluble, because all compounds containing OH- are soluble insoluble, because KOH is insoluble
What are alkalis?Alkalis are bases which are soluble in water. The basic alkalis are as follows:
KOHNaOHCa(OH)2Mg(OH)2 is insoluble in water.
In conclusion, KOH is a soluble base
Learn more about alkalis:
https://brainly.com/question/25317545
In the compound Ni2O3, nickel's oxidation number is_____
oxidation number is -2.
and oxygen's
Answer:
+3
Explanation:
The name of this compound would be nickel (III) oxide. Oxygen typically has a charge of -2. Given there are 3 oxygen atoms, that would equal a charge of -6. The nickel is the cation and must equal the charge of the anion, so must have a charge of +6. Since there are 2 nickel atoms, the charge on each must be +3.
what is mean by vector
Answer:
A quantity having direction as well as magnitude is called vector.
How does the chemistry of the ocean change in response to high levels of CO2 in the atmosphere?
Please help :)
A chocolate chip cookie recipe calls for 0.050 moles of baking soda (NaHCO3). How many grams should the chef mass out?
According to the mole concept, 4.2 g of baking soda should be weighed out.
What is mole concept?Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.
It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.
It is widely used in chemistry as a suitable way for expressing amounts of reactants and products.For the practical purposes, mass of one mole of compound in grams is approximately equal to mass of one molecule of compound measured in Daltons. Molar mass has units of gram per mole . In case of molecules, where molar mass in grams present in one mole of atoms is its atomic mass.
Baking soda has molar mass of 84 g /mole, thus mass is calculated using number of moles formula which is mass= molar mass×number of moles, which is mass=84×0.050=4.2 g.
Thus,4.2 g of baking soda should be weighed out by chef.
Learn more about mole concept,here:
https://brainly.com/question/12805690
#SPJ2
Which state of matter has particles that vibrate and can change place but remain touching in a random arrangement.
A. Liquid
B. None of these
C. Plasma
D. Gas
The particles in the solid are touching with very little space between them. The particles in a liquid usually are still touching but there are some spaces between them. The gas particles have big distances between them.
...
Liquids Solids and Gases:
NON OF THESE
with balanced chemical equations, show the different stages of fermentation
Answer:
formula for fermentation is: C6H12O6 → 2 C2H5OH + 2 CO.
from the equation 2PbO + C = 2Pb + CO2, detemine which one is reactant is oxidised and which is reduced.
Answer:
Explanation:
C is oxidised because C up to C+4
PbO is reduced because PbO from Pb2+ down to Pb0
Answer:
lead (Pb) is reduced carbon is oxidized
If you started with 2 moles of Nitrogen and 3 moles of Hydrogen, then you
would not have any leftover reactants. Explain which material would be
limiting since no hydrogen or nitrogen were left over?
N2 + 3H2 -> 2NH3
Answer: 0.3 moles NH3
Explanation:
What is occurring during the flat section of the graph below on the red arrow labeled boiling, between liquid and gas? gas (3.) OO liquid temperature solid time (minutes) O A. Heat is being absorbed, allowing particles of the liquid to overcome the atmospheric pressure. B. Heat is being absorbed, allowing particles of the liquid to overcome the vapor pressure. C. Heat is being released, allowing particles of liquid to overcome the pressure, and is why the temp does not increase. D. The temperature is no longer increasing even though heat is still being added because the heat is being absorbed to lower the melting point
Isotopes are atoms that have the same mass number, but different numbers.
atomic. True or false
Answer: Im not sure but I think it is false.
Explanation:
If the magnet loses its superconducting properties, all of the liquid helium could suddenly turn to a gas. If an MRI machine contains 1950 L liquid He with a density of 0.125g/mL, how many liters of He gas would be formed at 25°C and 1 atm? Use the ideal gas law. Round your final answer to two significant figures. Show your work. (4 points)
Answer:
Determine the volume of helium gas
Answer:
About 1,495 Liters of Helium.
Explanation:
To calculate the volume of helium gas formed when the magnet loses its superconducting properties, we can use the ideal gas law:
PV = nRT
Where:
P = Pressure (in atm)
V = Volume (in liters)
n = Number of moles of helium gas
R = Ideal gas constant (0.0821 L.atm/(mol.K))
T = Temperature (in Kelvin)
First, we need to find the number of moles of helium gas:
Given volume of liquid helium (V_liquid) = 1950 L
Density of liquid helium (ρ) = 0.125 g/mL = 0.125 g/cm³
To convert density from g/cm³ to g/L, we multiply by 1000:
Density of liquid helium (ρ) = 0.125 g/cm³ * 1000 cm³/L = 125 g/L
Mass of liquid helium (m) = Volume * Density = 1950 L * 125 g/L = 243,750 g
Next, we need to convert the mass of liquid helium to moles using the molar mass of helium:
Molar mass of helium (M) = 4.0026 g/mol
Number of moles (n) = Mass / Molar mass = 243,750 g / 4.0026 g/mol ≈ 60,907 mol
Now, we have the number of moles of helium gas (n), and we can calculate the volume of helium gas (V_gas) at 25°C (298.15 K) and 1 atm:
P = 1 atm
T = 25°C = 298.15 K
V_gas = nRT / P
V_gas = (60,907 mol) * (0.0821 L.atm/(mol.K)) * (298.15 K) / (1 atm)
V_gas ≈ 1,495 L
Therefore, approximately 1,495 liters of helium gas would be formed at 25°C and 1 atm when the magnet loses its superconducting properties.
what's the atomic weight of salt ?
Answer:
58.44 g/mol
Explanation:
58.44 g/mol
PLS HELP!! WILL MARK BRAINLIEST! 99 POINTS!
You're going to first balance the chemical equation.
After that, convert the grams of Na into moles of Na, and then multiply that with the ratio of moles of NaCl to Na, and then convert the mol of NaCl into grams in order to obtain the theoretical yield, since we are given that Na is the limiting reactant.
After that, plug the values into the yield formula, doing some basic algebra, and you should get your result.
You're going to first balance the chemical equation.
After that, convert the grams of Na into moles of Na, and then multiply that with the ratio of moles of NaCl to Na, and then convert the mol of NaCl into grams in order to obtain the theoretical yield, since we are given that Na is the limiting reactant.
After that, plug the values into the yield formula, doing some basic algebra, and you should get your result.
Which would increase the reaction rate?
O A. Decreasing the reactant concentrations
B. Removing heat from the system
O C. Adding a catalyst
O D. Lowering the value of k
Answer:
C
Explanation:
C. Adding a catalyst would increase the reaction rate.
What is a catalyst?A catalyst is a substance that increases the rate of a chemical reaction by lowering the activation energy required for the reaction to occur.
A catalyst enhances the probability of successful collisions between reactant molecules, which raises the pace of the reaction by offering an additional avenue for the reaction to occur.
As there would be fewer reactant molecules accessible to react with one another, decreasing reactant concentrations would result in a slower pace of reaction.
Due to the fact that chemical reactions often require energy to take place, eliminating heat from the system would also slow down the reaction rate. A lower value for k would result in a lower rate constant, which would lower the response rate.
Learn more about catalyst at:
https://brainly.com/question/24430084
#SPJ7
Which statement best describes what happens as thermal energy from the
sun warms the pavement?
A. The thermal energy absorbed by the pavement is destroyed.
B. The thermal energy that is not absorbed by the pavement is
destroyed.
C. Some thermal energy is absorbed by the pavement, and some is
destroyed.
D. The thermal energy of the sun is transferred to the pavement.
Answer:
D
Explanation:
The correct answer would be that the thermal energy of the sun is transferred to the pavement.
Thermal energy refers to the internal energy possessed by a system by virtue of the movement of molecules within such a system. In other words, it is the heat energy possessed by a system.
When the thermal energy from the sun warms the pavement, it means that the thermal energy from the sun has been successfully transferred to the pavement. Thermal energy can be transferred by conduction, convection, or by radiation depending on whether the system is a solid, liquid, gas respectively.
The correct option is, therefore, D.
