Answer:
0.067M H3PO4
Explanation:
H3PO4 reacts with NaOH as follows:
H3PO4 + 3NaOH → 3H2O + Na3PO4
Where 1 mole of H3PO4 reacts with 3 moles of NaOH
To solve trhis question we need to find the moles of NaOH required. With the chemical equation we can find the moles of H3PO4 and its concentration as follows:
Moles NaOH:
50.0mL = 0.0500L * (0.20moles /L) = 0.0100 moles NaOH
Moles H3PO4:
0.0100 moles NaOH * (1mol H3PO4 / 3mol NaOH) = 0.00333 moles H3PO4
Concentration:
0.00333 moles H3PO4 / 0.0500L = 0.067M H3PO4
HELP PLSSS WOOT WOOT
Which of the following pairs lists a substance that can neutralize Ca(OH)2 and the salt that would be produced from the reaction?
HCl and CaCl2
HClO and CaHClO
H2O and Ca(OH)3
H3PO4 and Ca(PO3)2
Answer:
Which of the following pairs lists a substance that can neutralize Ca(OH)2 and the salt that would be produced from the reaction?
HCl and CaCl2
HClO and CaHClO
H2O and Ca(OH)3
H3PO4 and Ca(PO3)2
Explanation:
The given substance is Ca(OH)2 which is a base.
To neutralise a base an acid is required.
Among the given options,
HCl and H3PO4 are the acids.
The salts foremd when calcium hydroxide reacts with the respective acids are CaCl2 and Ca3(PO4)2.
But among the given options, only the forst option that is
HCl and CaCl2 shows the correct formulas.
Hence, the answer is first option.
Answer:
HCl and CaCl2
Explanation:
Freé point
[tex] \: \: \: \: \: \: [/tex]
Answer
Tq so much.
Pls follow me and Mark as brainliest Plsssssssss
Answer:
Thank you so much.
the representative particle for KBr is the?
Answer:
This is a chemical symbol for Potassium Bromide
_______organisma consist of only one cell and _________ organisms consist of many cells
Answer:
Unicellular organisms consist of only one cell and multicellular organisms consist of many cell.
Explanation:
Living things made up of a cell are called unicellular beings. They are very small and simple. In other words, unicellular organisms are those that are formed only by a single cell in which all the vital functions necessary for life are produced. For this reason, they are mostly microscopic organisms. Examples of unicellular organisms are viruses or bacteria.
Multicellular organisms are made up of a large number of cells. They present, therefore, a greater complexity than unicellular organisms in terms of the functions they develop. All current multicellular organisms come from a single cell, that is, they begin their life being unicellular. That is, they are formed from a zygote. Some examples of multicellular organisms are mammals, fungi, and mosses.
So, unicellular organisms consist of only one cell and multicellular organisms consist of many cell.
chapter 3 reactivity of metals mcq question and question and answer and important notes?
Answer:
resend again that question dear
what is the formulas for Calcium Chloride,Aluminium Sulphate and Sodium hydroxide. *
Answer:
Explanation:
Why is there a star * behind the question.
CaCl2
Al2(SO4)3
NaOH
At a temperature of -25 °C, a sample of gas in a rigid container exerts a pressure of 55.8 kPa. At what temperature will the pressure reach 145 kPa?
The required temperature of the gas sample is -64.96 °C.
What is ideal gas equation?Ideal gas equation gives idea about the behavior of gas at different condition & represented as:
PV = nRT.
From the above equation it is clear that relation between temperature and pressure for this question is:
P₁/T₁ = P₂/T₂, where
P₁ & T₁ are the initial pressure and temperature.
P₂ & T₂ are the final pressure and temperature.
On putting values, we get
T₂ = (145)(-25) / (55.8) = -64.96 °C
Hence required temperature of the sample is -64.96 °C.
To know more about ideal gas equation, visit the below link:
https://brainly.com/question/1056445
#SPJ2
True or false, In a neutral atom of an element, the number of protons always equals the number of electrons.
Answer:
true
Explanation:
As an atom with no charge have same number of proton and electrons
Which statement is not true about the periodic table?
A. Elements in the same family have the same number of protons.
B. An element of the table is represented by a box with a symbol in it.
C. Elements in the same period of the periodic table have the same
number of electron shells.
D. It is organized by atomic number.
Elements in the same family have the same number of protons. This statement is not true about the periodic table. Therefore, option A is correct.
What is periodic table ?The chemical elements are arranged in rows and columns in the periodic table, sometimes referred to as the periodic table of the elements. It is frequently used in physics, chemistry, and other sciences and is frequently regarded as a symbol of chemistry.
The table can be used by scientists to anticipate chemical reactions, study trends in the periodic properties of certain elements, and speculate on the properties of yet-to-be-discovered elements. The elements are arranged in the contemporary periodic table according to their atomic numbers and periodic characteristics.
The periodic table has changed to represent more than 150 years of chemical and physics research and development.
Thus, option A is correct.
To learn more about the periodic table, follow the link;
https://brainly.com/question/11155928
#SPJ2
Trends in the periodic table indicate that the element with the greatest ionization energy is in which of the following periods and groups?
a
Period 2, Group 1
b
Period 7, Group 2
c
Period 6, Group 17
d
Period 1, Group 18
Answer:
D Period 1, Group 18
Explanation:
it's helium
it's top right corner of the periodic table
which hybridization is found in CO2?
Someone plz help me here are the photos, I need the last one
Answer:
(6 mol)·(-393.5 kJ/mol) + (6 mol)·(-285.83 kJ/mol) - (1 mol)·(-1,273.02 kJ/mol) + (6 mol)·(0 kJ/mol)
Explanation:
Question; From the given options, the chemical reaction in the question is presented as follows;
C₆H₁₂O₆(s) + 6O₂(g) → 6CO₂(g) + 6H₂O(l), given that we have;
[tex]\Delta \text H _f^{\circ}[/tex] for C₆H₁₂O₆ = -1,273.02 kJ/mol
[tex]\Delta \text H _f^{\circ}[/tex] for O₂(g) = 0 kJ/mol
[tex]\Delta \text H _f^{\circ}[/tex] for CO₂(g) = -393.5 kJ/mol
[tex]\Delta \text H _f^{\circ}[/tex] for H₂O(l) = -285.83 kJ/mol
The heat or enthalpy of a reaction, is given as follows;
[tex]\Delta\text H_{rxn}^{\circ} = \sum \text n \cdot \Delta \text H _f^{\circ}(\text {products}) - \sum \text m \cdot \Delta \text H _f^{\circ}(\text {reactants} \text)[/tex]
Therefore, the equation which should be used to calculate [tex]\Delta\text H_{rxn}^{\circ}[/tex], is given as follows;
[tex]\sum \text n \cdot \Delta \text H _f^{\circ}(\text {products})[/tex] = (6 mol)·(-393.5 kJ/mol) + (6 mol)·(-285.83 kJ/mol)
[tex]\sum \text m \cdot \Delta \text H _f^{\circ}(\text {reactants} \text)[/tex] = (1 mol)·(-1,273.02 kJ/mol) + (6 mol)·(0 kJ/mol)
Therefore;
[tex]\Delta\text H_{rxn}^{\circ}[/tex] = (6 mol)·(-393.5 kJ/mol) + (6 mol)·(-285.83 kJ/mol) - (1 mol)·(-1,273.02 kJ/mol) + (6 mol)·(0 kJ/mol)
The normal boiling point of ethanol is 78.4 oC. Its enthalpy of vaporization is 38.6 kJ/mol. Estimate the vapor pressure of ethanol at 26.3 oC.
Answer: The vapor pressure of ethanol at [tex]26.3^{o}C[/tex] is 238.3 torr.
Explanation:
Given: [tex]\Delta H_{vap}[/tex] = 38.6 kJ/mol
[tex]T_{1} = 26.3^{o}C = (26.3 + 273) K = 299.3 K[/tex]
[tex]T_{2} = 78.4^{o}C = (78.4 + 273) K = 351.4 K[/tex]
Formula used to calculate the vapor pressure of ethanol is as follows.
[tex]ln\frac{P_{2}}{P_{1}} = \frac{\Delta H_{vap}}{R} [\frac{1}{T_{1}} - \frac{1}{T_{2}}]\\[/tex]
Substitute the values into above formula as follows.
[tex]ln\frac{P_{2}}{P_{1}} = \frac{\Delta H_{vap}}{R} [\frac{1}{T_{1}} - \frac{1}{T_{2}}]\\ \\ln \frac{760 torr}{P_{1}} = \frac{38600 J}{8.314 J/mol K}[\frac{1}{299.3} - \frac{1}{351.4}]\\\frac{760}{P_{1}} = 3.18\\P_{1} = 238.3 torr[/tex]
Thus, we can conclude that the vapor pressure of ethanol at [tex]26.3^{o}C[/tex] is 238.3 torr.
I need the answer to this asap!! please explain
Answer:
See explanation
Explanation:
Calcium carbide reacts with water to yield acetylene gas and calcium hydroxide as follows;
CaC2(s)+2H2O(g)⇋Ca(OH)2(s)+C2H2(g)
This now shows us that the equation as written in the question is wrong. Since the equation for the reaction of calcium carbide and water as shown in the question is wrong, the equation can not be balanced.
Stae the change in oxidation state of iron during the reactiong of iron extraction
Answer:
3
Explanation:
The reaction for the extraction of Iron is :-
2Fe2O3(s) + 3C(s) → 4Fe(l) + 3CO2(g)
O.S. of Fe in Fe2O3 is 3 and O.S. of Fe(l) is 0change in oxidation state (O.S.) = higher O.S - lower O.S
= 3 - 0
= 3
The reaction from NaOH and CH3COOH gives
a. Basic Salt
b. Acidic Salt
c. Normal Salt
d. Neutral Salt
Which phrase best describes a Hawaiian eruption?
A. Slow-moving lava flows and explosions of pumice
B. Ash shooting high into the atmosphere
C. Fast-moving lava flows and explosions of cinder
D. Lava fountains and fissure eruptions
Answer:
C.faste-moving lava flows and explosion of cinder
classify each of the following solids as ionic,metallic, molecular, network (covalent)or amorphous?
1) Tetra phosphorous deicide(P4O10)
2)Graphite
3) Ammonium phosphate (NH4)3po4
4) Brass
5)SiC
6)Rb
7)l2
8)LiBr
9)P4
10) Plastic
11)Si
Answer;
P4O10 - molecular solid
Graphite - network solid
Ammonium phosphate - ionic
Brass - metallic
SiC - network solid
Rb- metallic
I2 - molecular
LiBr- ionic
P4 - molecular
Plastic - amorphous
Si - network
Explanation:
An ioinc solid is made up of a pair of oppositely charged ion held together by electrostatic interaction between the bonding species.
A covalent solid is a solid in which the atoms involved in the solid are bonded together by covalent bonds. Covalent solids are also molecular.
Metals are held together by interaction of metal ions and a sea of electrons. This is called the metallic bond.
A network solid is composed of covalently bonded atoms that repeat itself in a definite manner. E.g SiC
All light waves can be described in terms of their speed, frequency, and_____
The reversible reaction, 4HCl(g) + Si (s) ⇌ SiCl4 (l) + 2H2 (g) , would be classified as a ______________ reaction.
exothermic
endothermic
homogeneous
heterogeneous
Answer:
endothermic
Explanation:
endothermic reactions absorb heat from their surroundings, in this reaction the reactants are gas and solid and the products are liquid and gas, implying heat was absorbed to turn a solid to a liquid.
I need answers to question 1,2,3
Answer:
1. 0.125 mole
2. 42.5 g
3. 0.61 mole
Explanation:
1. Determination of the number of mole of NaOH.
Mass of NaOH = 5 g
Molar mass of NaOH = 23 + 16 + 1
= 40 g/mol
Mole of NaOH =?
Mole = mass /molar mass
Mole of NaOH = 5/40
Mole NaOH = 0.125 mole
2. Determination of the mass of NH₃.
Mole of NH₃ = 2.5 moles
Molar mass of NH₃ = 14 + (3×1)
= 14 + 3
= 17 g/mol
Mass of NH₃ =?
Mass = mole × molar mass
Mass of NH₃ = 2.5 × 17
Mass of NH₃ = 42.5 g
3. Determination of the number of mole of Ca(NO₃)₂.
Mass of Ca(NO₃)₂ = 100 g
Molar mass of Ca(NO₃)₂ = 40 + 2[14 + (3×16)]
= 40 + 2[14 + 48]
= 40 + 2[62]
= 40 + 124
= 164 g/mol
Mole of Ca(NO₃)₂ =?
Mole = mass /molar mass
Mole of Ca(NO₃)₂ = 100 / 164
Mole of Ca(NO₃)₂ = 0.61 mole
What type of soil has the finest of all the soil particles, measuring fewer than 0.002 millimeters in size?
Answer:
Clay soil
Explanation:
There are basically three types of soil namely: Sandy soil, clayey soil and loamy soil. Each of this soil type possess their own distinguishing characteristics. For example, on the basis of particle size and texture, CLAY SOIL possesses the smallest and finest particles.
Particles in a clay soil weighs lesser than 0.002 millimeters (mm) in size, making it have a high water holding or retention capacity.
which of the following pairs are ionic compounds ( Al,Cl),(Na,O),(Al,F)
Answer:
This answer I think it is Al,F
Nitrogen dioxide, a major air pollutant, can be produced by the combustion of nitrogen oxide as shown. 2NO + O2 Right arrow. 2NO2 In a plant, 1,500 kg of nitrogen oxide is consumed per day to produce 1,500 kg of nitrogen dioxide per day. What is the percent yield? Use Percent yield equals StartFraction actual yield over theoretical yield EndFraction times 100.. 21.7% 32.6% 43.5% 65.2% Mark this and return Save and Exit Next Submit
Answer:
65.2%
Explanation:
It is given that :
[tex]$2NO + O_2 \rightarrow 2NO_2$[/tex]
Therefore, 60 g of nitrogen oxide will produce 92 g of nitrogen dioxide
or 60 kg of nitrogen oxide will produce 92 kg of nitrogen dioxide
or 1500 kg of nitrogen oxide will produce [tex]2300\ kg[/tex] of nitrogen dioxide
Therefore the percentage yield = (Actual yield / Expected yield) x 100
percentage yield = [tex]$\frac{1500}{2300} \times 100$[/tex]
Percentage yield = 65.217 %
Answer:
the person above me is correct, the answer for this is 65.2% or option D!
Explanation:
thank you person above me! i got a 100% on the test! :D
Help me please I really need this tomorrow
9.D
10.A
11.C
12.B
13.D
14.C
15.A
16.A
18.C
Why are measurements important for science?
Pleaseee help me :( give two reasons why it's important
Answer:
measurements are important to do calculations to get correct results and without them scientists cannot form theories
draw the flow chart of production of silk from silk moth
please help....
no links or get reported
Too lazy to draw sorry lol.
#CarryOnLearning
I actually just looked it up via image search.
just copy by hand either of the flow charts.
if you can, use colors to fill. makes it more interesting to look at
and define a circle (or rather a few points on it) to draw it neatly. the defined points can later be transformed into the arrows.
Liquid octane (CH3(CH2)CH3) reacts with gaseous oxygen gas(O2) to produce gaseous carbon dioxide(CO2) and gaseous water (H2O). What is the theoretical yield of carbon dioxide formed from the reaction of 27.4g of octane and 77.8g of oxygen gas?
Answer:
The theoretical yield of carbon dioxide formed is 68.4 grams CO2
Explanation:
Step 1: Data given
Liquid octane = C8H18
gaseous oxygen gas = O2
gaseous carbon dioxide = CO2
gaseous water = H2O
Mass of octane = 27.4 grams
Molar mass of octane = 114.23 g/mol
Mass of oxygen = 77.8 grams
Molar mass of oxygen = 32.0 g/mol
Step 2: The reaction
2C8H18(l) + 25O2(g) → 16CO2(g) + 18H2O(g)
Step 3: Calculate number of moles
Moles = mass / molar mass
Moles of octane = 27.4 grams / 114.23 g/mol
Moles of octane = 0.240 moles
Moles of oxygen = 77.8 grams / 32.0 g/mol
Moles of oxygen = 2.43 moles
Step 4: Calculate the moles of the products
For 2 moles of octane we need 25 moles of O2 to produce 16 moles of CO2 and 18 moles H2O
O2 is the limiting reactant. It will completely react. (2.43 moles).
There will react 2.43/12.5 = 0.194 moles
There will remain 0.240 - 0.194 = 0.046 moles of octane.
There will be produced:
16/25 * 2.43 = 1.555 moles of CO2
18/25 * 2.43 = 1.750 moles of H2O
This is:
1.56 moles * 44.01 g/mol = 68.4 grams CO2
1.750 moles * 18.02 g/mol = 31.5 grams H2O
The theoretical yield of carbon dioxide formed is 68.4 grams CO2
A 115.0-g sample of oxygen was produced by heating 400.0 g of potassium chlorate. 2KClO3 Right arrow. 2KCI 3O2 What is the percent yield of oxygen in this chemical reaction
Answer:
Percentage yield of O₂ = 73.4%
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
2KClO₃ —> 2KCl + 3O₂
Next, we shall determine the mass of KClO₃ that decomposed and the mass of O₂ produced from the balanced equation. This can be obtained as follow:
Molar mass of KClO₃ = 39 + 35.5 + (3×16)
= 39 + 35.5 + 48
= 122.5 g/mol
Mass of KClO₃ from the balanced equation = 2 × 122.5 = 245 g
Molar mass of O₂ = 2 × 16 = 32 g/mol
Mass of O₂ from the balanced equation = 3 × 32 = 96 g
SUMMARY:
From the balanced equation above,
245 g of KClO₃ decomposed to produce 96 g of O₂.
Next, we shall determine the theoretical yield of O₂. This can be obtained as follow:
From the balanced equation above,
245 g of KClO₃ decomposed to produce 96 g of O₂.
Therefore, 400 g 245 g of KClO₃ will decompose to produce
= (400 × 96)/245 = 156.7 g of O₂.
Thus, the theoretical yield of O₂ is 156.7 g
Finally, we shall determine the percentage yield of O₂. This can be obtained as follow:
Actual yield of O₂ = 115.0 g
Theoretical yield of O₂ = 156.7 g
Percentage yield of O₂ =?
Percentage yield = Actual yield /Theoretical × 100
Percentage yield = 115/156.7 × 100
Percentage yield = 11500/156.7
Percentage yield of O₂ = 73.4%
