Answer:
THE ENTHALPY CHANGE IN KJ/MOLE IS +114 KJ/MOLE.
Explanation:
Heat = mass * specific heat capacity * temperature rise
Total volume = 100 + 50 = 150 mL
Total mass = density * volume
Total mass = 1 * 150 mL = 150 g
So therefore, the heat evolved during the reaction is:
Heat = 150 * 4.18 * ( 31.4 - 22.3)
Heat = 150 * 4.18 * 9.1
Heat = 5705.7 J
Equation for the reaction:
2 NaOH(aq) + H2SO4(aq) → Na2SO4(aq) + 2 H2O(l)
From the equation, 2 moles of NaOH reacts with 1 mole of H2SO4 to produce 1 mole of Na2SO4 and 2 moles of water
50 mL of 1 M of H2SO4 contains
50 * 1 / 1000 mole of acid
= 0.05 mole of acid
The production of 1 mole of water evolved 5705.7 J of heat and hence the enthalpy changein kJ per mole will be:
0.05 mole of H2SO4 produces 5705.7 J of heat
1 mole of H2SO4 will produce 5705.7 / 0.05 J
= 114,114 J / mole
In kj/mole = 114 kJ/mole.
Hence, the enthalpy change of the reaction in kJ /mole is +114 kJ/mole.
What is the value of the equilibrium constant, K, for a reaction for which ∆G° is equal to –5.20 kJ at 50°C?
Answer:
6.93
Explanation:
Step 1: Given data
Standard Gibbs free energy (∆G°): -5.20 kJTemperature (T): 50°CEquilibrium constant (K): ?Step 2: Convert the temperature to the Kelvin scale
We will use the following expression.
K = °C + 273.15
K = 50°C + 273.15
K = 323 K
Step 3: Calculate K
We will use the following expression.
∆G° = -R × T × ln K
-5.20 × 10³ J = -(8.314 J/mol.K) × 323 K × ln K
K = 6.93
Given that π = n M R T, rearrange the equation to solve for V
Answer:
V= n/M
Explanation:
From;
π = nRT/V = MRT
Where;
n= number of moles
R= gas constant
T= absolute temperature
M= molar mass
V= volume of the solution
π= osmotic pressure
Thus;
nRT/V = MRT
nRT = VMRT
V= nRT/MRT
V= n/M
Calculate the molar solubility of CaF2 at 25°C in a solution that is 0.010 M in Ca(NO3)2. The Ksp for CaF2 is 3.9 x 10-11.
Answer:
[tex]Molar \ solubility=3.12x10^{-5}M[/tex]
Explanation:
Hello,
In this case, for the dissociation of calcium fluoride:
[tex]CaF_2(s)\rightleftharpoons Ca^{2+}+2F^-[/tex]
The equilibrium expression is:
[tex]Ksp=[Ca^{2+}][F^-]^2[/tex]
In such a way, via the ICE procedure, including an initial concentration of calcium of 0.01 M (due to the calcium nitrate solution), the reaction extent [tex]x[/tex] is computed as follows:
[tex]3.9x10^{-11}=(0.01+x)(2*x)^2\\\\x=0.0000312M[/tex]
Thus, the molar solubility equals the reaction extent [tex]x[/tex], therefore:
[tex]Molar \ solubility=3.12x10^{-5}M[/tex]
Regards.
The molar solubility of Calcium fluoride has been calculated as [tex]3.12\;\times\;10^-^5\;\rm M[/tex].
The dissociation of calcium fluoride has been given by:
[tex]\rm CaF_2\;\rightarrow\;Ca^2^+\;+\;2\;F^-[/tex]
The solubility constant, ksp has been given as:
[tex]ksp=\rm[Mg^2^+]\;[F^-]^2[/tex]
From the dissociation of Calcium nitrate, the concentration of Ca ion in the solution has been 0.01 M.
The dissociation of Calcium fluoride x M has been resulted in x M Ca and 2x M F ions.
The concentration of Ca in the solution has been resulted as x + 0.01 M.
The solubility product can be given as:
[tex]3.9\;\times\;10^-^1^1=[x+0.01]\;[2x]^2\\3.9\;\times\;10^-^1^1=[x+0.01]\;4x^2\\x=3.12\;\times\;10^-^5[/tex]
The molar solubility of Calcium fluoride has been calculated as [tex]3.12\;\times\;10^-^5\;\rm M[/tex].
For more information about molar solubility, refer to the link:
https://brainly.com/question/7141822
GIVING 100 POINTS PLEASE ANSWER SOON When ponds freeze, they freeze at the surface first before freezing at the bottom. Which property of water explains why this might happen? Density Adhesion High boiling point High specific heat
Answer:
[tex]\huge\boxed{Density}[/tex]
Explanation:
This is because of density. Since Ice is less dense than water, the ice even formed inside the pond then starts floating on the surface of water. Because of this density, Ice floats on water and thus the water freezes at the surface.
Answer:
Density
Explanation:
Water is less dense as a solid than as a liquid, so as ponds freeze, the ice floats at the top and the pond freezes from the top-down.
If 11.2 g of naphthalene, C10H8, is dissolved in 107.8 g of chloroform, CHCl3, what is the molality of the solution
Answer:
CHC12
Explanation:
i am not really sure i am onna do a quick research 4 u tho
a. Name a chemical or product that was once considered safe but is now considered
harmful. (1 point)
-
Answer:
Bisphenol A (BPA)
Explanation:
Bisphenol A (BPA) is a chemical additive commonly found in resins and plastics, such as water bottles or food containers. It can also be found in household electronics, medical devices, dental fillings and sales receipts, just to name a few other applications.
The pH of an acid solution is 5.82. Calculate the Ka for the monoprotic acid. The initial acid concentration is 0.010 M.
Answer:
The answer is
[tex]Ka = 2.29 \times {10}^{ - 14} moldm^{ - 3} [/tex]Explanation:
The Ka of an acid when given the pH and concentration can be found by
[tex]pH = - \frac{1}{2} log(Ka) - \frac{1}{2} log(c) [/tex]where
c is the concentration of the acid
From the question
pH = 5.82
c = 0.010 M
Substitute the values into the above formula and solve for Ka
We have
[tex]5.82 = - \frac{1}{2} log(Ka) - \frac{1}{2} log(0.010) [/tex][tex] - \frac{1}{2} log(Ka) = 5.82 + 1[/tex][tex] - \frac{1}{2} log(Ka) = 6.82[/tex]Multiply through by - 2
[tex] log(Ka) = - 13.64[/tex]Find antilog of both sides
We have the final answer as
[tex]Ka = 2.29 \times {10}^{ - 14} moldm^{ - 3} [/tex]Hope this helps you
g The electronic structure of which ONE of the following species cannot be adequately described by a single Lewis formula? (In other words, the electronic structure of which one can only be described by drawing two or more resonance structures?) A) C2H4 B) SO3 2– C) SO3 D) C3H8 E) HCN
Answer:
C) SO3
Explanation:
Lewis formula shows the bonding between atoms of a molecule and expresses the lone pair present in the atoms.
SO3 or Sulfur trioxide cannot be adequately described by a single Lewis formula because it has majorly 3 resonance structures because Sulfur does not follow the octet rule and can expand electrons in its outer shell.
Hence, the correct answer is C) SO3
Determine the molarity for each of the following solutions A. 1.8×10^4mg of HCL in 0.075L of solutions
Click on ALL of the following that use sound waves to communicate with their surroundings and find their way! bats cars dolphins whales birds submarines buses school
How many molecules are there in 3.5 moles of carbon dioxide? A. 63.21 x 10^23 B. 21.07 x 10^23 C. 42.14 x 10^23 D. 6.02 x 10^23
Answer:
B. 21.07 x 10²³ molecules
Explanation:
Avogadro's Number: 6.022 x 10²³
Step 1: Set up equation
[tex]3.5 mols CO_2(\frac{6.022(10^{23}) moleculesCO_2}{1 mol CO_2})[/tex]
Step 2: Multiply and cancel out units
3.5(6.022 x 10²³) = 21.07 x 10²³ molecules CO₂
Step 3: Convert to proper scientific notation
≈ 2.11 x 10²³ molecules CO₂
Which of the following types of electromagnetic radiation have higher frequencies than visible light and which have shorter frequencies than visible light? Sort them accordingly. ltems (6 items) (Drag and drop into the appropriate area below)
a. Gamma rays
b. Infrared radiation
c. Ultraviolet liht
d. X-rays
e. Microwaves
f. Radio waves
Answer:
Higher frequency than visible light - Ultraviolet light, X-rays, and Gamma rays
Lower frequency than visible light - Infrared radiation, microwaves, and Radio waves
Explanation:
The frequencies of electromagnetic radiations vary according to their wavelengths. The relationship between the frequency and wavelength of the waves is expressed such that:
λ = c/f, where λ = wavelength, c = speed of light, and f = frequency.
Thus, there is an inverse relationship between the wavelength and the frequency of electromagnetic waves.
The order of the electromagnetic waves based on their frequency from the lowest to the highest is radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma-rays
Hence, electromagnetic waves with higher frequencies than visible light include ultraviolet light, X-rays, and Gamma rays while those with lower frequencies include Infrared radiation, microwaves, and Radio waves.
Answer:
need points
Explanation:
If an individual proton has mass 1.007825 amu, and an individual neutron has mass 1.008665 amu, what's the calculated mass of a neptunium-236 nucleus? options: A) 237.92482 amu B) 236.99873 amu C) 237.96682 amu D) 237.04817 amu
Answer:
C) 237.96682 amu
Explanation:
The symbol for neptunium-236 is given as;
²³⁶₉₃Np
This element has 93 protons and (236 - 93 = 143) neutrons.
Mass Number =Total mass of Protons + Total mass of neutrons
Total Mass pf protons = 93 * 1.007825 amu, = 93.727725 amu
Total mass of Neutrons = 143 * 1.008665 amu = 144.239095 amu
Mass = 144.239095 + 93.727725 = 237.96682 amu
Correct option is option C.
Amino acids can be synthesized by reductive amination. Draw the structure of the organic compound that you would use to synthesize serine.
Answer:
Following are the answer to this question:
Explanation:
For the reductive amination of its carbonyl group, amino acids could be synthesized by reducing ammunition, which can be synthesized in the given attachment file:
please find the attachment:
When 5.58g H2 react by the following balanced equation, 32.8g H2O are formed. What is the percent yield of the reaction? 2H2(g)+O2(g)⟶2H2O(l)
A) 11.7%
B) 17.0%
C) 38.9%
D) 65.7%
Answer:
D) 65.7%
Explanation:
Based on the reaction:
2H2(g)+O2(g)⟶2H2O(l)
2 moles of hydrogen produce 2 moles of water assuming an excess of oxygen.
To find percent yield of the reaction we need to find theoretical yield (The yield assuming all hydrogen reacts producing water). With theoretical yield and actual yield (32.8g H₂O) we can determine percent yield as 100 times the ratio between actual yield and theoretical yield.
Theoretical yield:
Moles of 5.58g H₂:
5.58g H₂ ₓ (1 mol / 2.016g) = 2.768 moles H₂
As 2 moles of H₂ produce 2 moles of H₂O, if all hydrogen reacts will produce 2.768 moles H₂O. In grams:
2.768 moles H₂O ₓ (18.015g / mol) =
49.86g H₂O is theoretical yield
Percent yield:
Percent yield = Actual yield / Theoretical yield ₓ 100
32.8g H₂O / 49.86g ₓ 100 =
65.7% is percent yield of the reaction
D) 65.7%What happens when an atom of sulfur combines with two atoms of chlorine to produce SCl2?
Answer:
Each chlorine atom shares a pair of electrons with the sulfur atom. ... Each chlorine atom shares all its valence electrons with the sulfur atom
13. Arrange each group of units from smallest to
largest
a)km, mm, cm, m
b) mg, kg, g
C) L, mL
d) s, ms, min, h
Answer:
A. mm,cm,m,Km
B. mg, g, Kg
C. mL,L
D. ms, s, min, h
Explanation:
Consider the following reaction at 298.15 K: Co(s)+Fe2+(aq,1.47 M)⟶Co2+(aq,0.33 M)+Fe(s) If the standard reduction potential for cobalt(II) is −0.28 V and the standard reduction potential for iron(II) is −0.447 V, what is the cell potential in volts for this cell? Report your answer with two significant figures.
Answer:
The correct answer is 0.186 V
Explanation:
The two hemirreactions are:
Reduction: Fe²⁺ + 2 e- → Fe(s)
Oxidation : Co(s) → Co²⁺ + 2 e-
Thus, we calculate the standard cell potential (Eº) from the difference between the reduction potentials of cobalt and iron, respectively, as follows:
Eº = Eº(Fe²⁺/Fe(s)) - Eº(Co²⁺/Co(s)) = -0.28 V - (-0.447 V) = 0.167 V
Then, we use the Nernst equation to calculate the cell potential (E) at 298.15 K:
E= Eº - (0.0592 V/n) x log Q
Where:
n: number of electrons that are transferred in the reaction. In this case, n= 2.
Q: ratio between the concentrations of products over reactants, calculated as follows:
[tex]Q = \frac{ [Co^{2+} ]}{[Fe^{2+} ]} = \frac{0.33 M}{1.47 M} = 0.2244[/tex]
Finally, we introduce Eº= 0.167 V, n= 2, Q=0.2244, to obtain E:
E= 0.167 V - (0.0592 V/2) x log (0.2244) = 0.186 V
It would require ? Liters of water to dissolve 36 grams of the substance.
The correct answer is 3 liters
Explanation:
If a substance has a solubility of [tex]12 \frac{grams}{liter}[/tex], this means in 1 liter, the grams that can be dissolved are 12 grams. Now, considering Justin and Ellie need to dissolve 36 grams to calculate the number of liters just divide the total of grams into 12 as each liter dissolves only 12 grams. The process is shown below:
36 grams (the amount that will be dissolved) ÷ 12 (grames dissolved per liter) = 3 liters (liters to dissolved 36 grams)
Answer:
It would be 3 liters
Explanation:
what is the oxidation state of the oxygen atoms in co2,h2o and o2 and what does this information tell you about photosynthesis and respiration
Answer:
-2, -2 and 0.
- Respiration is a process in which energy is produced and photosynthesis is a process in which energy is used.
Explanation:
Hello,
In this case, oxygen is a substance that is used for animals and us to acquire the energy necessary for several functions by the cellular respiration (we also need glucose), besides, it is a product of the photosynthesis carried out by vegetable cells (plants). Moreover, carbon dioxide and water are used by the plants to produce oxygen we need as well as glucose via the aforementioned photosynthesis, thus, both chemical reactions are shown below:
[tex]C_6H_{12}O_6+6O_2\rightarrow 6CO_2+6H_2O\ \ \ respiration\\\\6CO_2+6H_2O\rightarrow C_6H_{12}O_6+6O_2\ \ \ photosynthesis[/tex]
In such a way, since the oxygen in carbon dioxide and water has an oxidation state of -2 (reduced form) we can say that the respiration is a process in which energy is produced and since the oxygen yielded during the photosynthesis has an oxydation state of 0, we can say that photosynthesis is a process in which energy is used.
Best regards.
If we want to change a gas to its liquid state, should we add or remove energy from the gas?
If there are a 1000 ml per 1 L and a 1000g per kilogram
a. How many ml are there in 5.0 L?
b. How many kg are there in 230g?
Answer:
hbchbjH j jas a aa a s ds d as das
Explanation:
Candle wax melts low temperature, it is not conductive to electricity, it is insoluble in water and partially soluble in solvents nonpolar, like gasoline. Than type of links are present in the candle wax?
A. Electrostatics.
B. Apolar.
C. lónicos.
D. Hydrogen bridges.
electrostatic and ionic are definitely not the answer because they have high melting point
hydrogen bonds are too weak and not permanent.
so the answer is apolar as it is soluble in polar solvents (water)
Answer:
B. Nonpolar
Explanation:
The low melting point tells you the compound is not ionic, metallic, or a network solid.
It is almost certainly a molecular solid.
It does not conduct electricity, so it is not metallic (which we have already ruled out).
It is insoluble in polar solvents (water) and soluble in nonpolar solvents (gasoline).
Since like dissolves like, the molecule is nonpolar.
The type of links must be nonpolar.
Increasing which factor will cause the gravitational force between two objects to decrease?
weights of the objects
distance between the objects
acceleration of the objects
masses of the objects
Answer:
B
Explanation:
Increasing distance between the objects factor will cause the gravitational force between two objects to decrease. Therefore, option B is correct.
What causes gravitational force to decrease?The gravitational force grows in proportion to the size of the masses . The gravitational force weakens rapidly as the distance between masses grows. Unless at least one of the objects has a lot of mass, detecting gravitational force is extremely difficult.
Gravity is affected by object size and distance between objects. Mass is a unit of measurement for the amount of matter in an object.
The force of gravity is proportional to the masses of the two objects and inversely proportional to the square of the distance between them. This means that the force of gravity increases with mass but decreases as the distance between objects increases.
Thus, option B is correct.
To learn more about the gravitational force, follow the link;
https://brainly.com/question/12528243
#SPJ6
The concentration of glucose, C6H12O6, in normal spinal fluid is 75 mg/100g. What is the molality of the solution
Answer:
4.16x10⁻³m
Explanation:
Molality is defined as the ratio between moles of a solute, in this case glucose, and kg of solvent.
As there are 100g of solvent, the kg are 0.1. Thus, we only need to calculate from the mass of glucose its moles to solve the molality of the solution.
Moles glucose:
There are 75mg = 0.075g of glucose. To conver mass to moles it is necessary molar mass.
Molar mass glucose:
6C = 12.01g/mol*6 = 72.06g/mol
12H = 12*1.008g/mol = 12.10g/mol
6O = 6*16g/mol = 96g/mol
72.06 + 12.10 + 96 = 180.16g/mol
Moles of 0.075g of glucose:
0.075g * (1 mol / 180.16g) =
4.16x10⁻⁴ moles of glucose
Molality of the solution:
4.16x10⁻⁴ moles of glucose / 0.1kg of solvent =
4.16x10⁻³mThe molarity of the solution is 4.16x10⁻³m
Calculation of the molarity:We know that the molarity refers to the ratio that arise between the moles of a solute.
Since there are 100 g of solvent so here the kg should be 0.1.
Likewise there is 75 mg so it should be 0.075g
Now the Molar mass glucose should be
6C = 12.01g/mol*6 = 72.06g/mol
12H = 12*1.008g/mol = 12.10g/mol
6O = 6*16g/mol = 96g/mol
So,
= 72.06 + 12.10 + 96
= 180.16g/mol
Now
Moles of 0.075g of glucose:
0.075g * (1 mol / 180.16g) =
4.16x10⁻⁴ moles of glucose
Now finally
Molality of the solution:
= 4.16x10⁻⁴ moles of glucose / 0.1kg of solvent
=4.16x10⁻³m
learn more about molarity here: https://brainly.com/question/13011592
Identify a homogeneous catalyst. Identify a homogeneous catalyst. Pd in H2 gas N2 and H2 catalyzed by Fe SO2 over vanadium (V) oxide Pt with methane H2SO4 with concentrated HCl
Answer:
H2SO4 with concentrated HCl
Chlorine monoxide and dichlorine dioxide are involved in the catalytic destruction of stratospheric ozone. They are related by the equation:
2ClO(g) ⇌ Cl2O2(g) for which Kc is 4.96×10^11 at 273 K.
For an equilibrium mixture in which [Cl2O2] is 6.00 x 10^-6M, what is [ClO]?
Answer:
[ClO] = 3.48×10¯⁹ M.
Explanation:
The following data were obtained from the question:
Equilibrium constant (Kc) = 4.96×10¹¹
Concentration of Cl2O2, [Cl2O2] = 6x10¯⁶ M.
Concentration of ClO, [ClO] =.?
The equation for the reaction is given below:
2ClO(g) ⇌ Cl2O2(g)
The equilibrium constant for a reaction is simply defined as the ratio of the concentration of product raised to their coefficient to the concentration of the reactant raised to their coefficient.
The equilibrium constant, Kc for the reaction is given by:
Kc = [Cl2O2] / [ClO]²
Thus, we can calculate the concentration of ClO, [ClO] as follow:
Kc = [Cl2O2] / [ClO]²
4.96×10¹¹ = 6x10¯⁶ / [ClO]²
Cross multiply
4.96×10¹¹ × [ClO]² = 6x10¯⁶
Divide both side by 4.96×10¹¹
[ClO]² = 6x10¯⁶ / 4.96×10¹¹
[ClO]² = 1.21×10¯¹⁷
Take the square root of both side
[ClO] = √ (1.21×10¯¹⁷)
[ClO] = 3.48×10¯⁹ M
Therefore, the concentration of ClO, [ClO] is 3.48×10¯⁹ M.
A solution of LiCl in water has XLiCl = 0.0800. What is the molality? A solution of LiCl in water has XLiCl = 0.0800. What is the molality? 4.44 m LiCl 8.70 m LiCl 4.83 m LiCl 4.01 m LiCl
Answer:
mol LiCl = 4.83 m
Explanation:
GIven:
Solution of LiCl in water XLiCl = 0.0800
Mol of water in kg = 55.55 mole
Find:
Molality
Computation:
mole fraction = mol LiCl / (mol water + mol LiCl)
0.0800 = mol LiCl / (55.55 mol + mol LiCl)
0.0800 mol LiCl + 4.444 mol = mol LiCl
mol LiCl - 0.0800 mol LiCl = 4.444 mol
0.92 mol LiCl = 4.444 mol
mol LiCl = 4.83 m
What is the concentration in ppm of 4 g of NaCl dissolved in 100 mL of water?
suppose you make lemonade with one can lemonade concentrate mixed with four cans of water. What is the fraction of the final product that is water
Answer:
0.8 part of the product is water
Explanation:
Volume (or parts) of water = 4
Volume (or parts) of lemonade = 1
Total volume = 4 + 1 = 5
Fraction of water = Volume of water / Total volume = 4 / 5 = 0.8
