Answer:
[tex]V=1.76\times 10^{-4}\ V[/tex]
Explanation:
Given that,
The diameter of a wire, d = 1.628 mm
Radius, r = 0.814 mm = 0.000814m
Current, I = 12.5 mA
The length of the wire, l = 2m
The resistivity of the wire, [tex]\rho=1.47\times 10^{-8}\ \Omega-m[/tex]
We need to find the potential difference across the wire. We know that the resistance of the wire is given by :
[tex]R=\rho\dfrac{l}{A}[/tex]
Also, V = IR
[tex]\dfrac{V}{I}=\rho\dfrac{l}{A}\\\\V=\dfrac{\rho l I}{A}\\\\V=\dfrac{1.47\times 10^{-8}\times 2\times 12.5\times 10^{-3}}{\pi \times (0.000814)^2}\\\\V=1.76\times 10^{-4}\ V[/tex]
So, the potential difference of the wire is [tex]1.76\times 10^{-4}\ V[/tex].
a car travels straight for 20 miles on a road that is 30 north of east. what is the easiest component of the cars displacement to the nearest tenth of a mile
A -17.3 miles
B -10.0miles
C 10.0 miles
D 17.3 miles
Answer:
17.3 miles
Explanation:
a clay ball with a mass of 0.35 kg hits another 0.35 kg ball at rest and the two stick together. The first balls intial speed us 4.2m/s.
What are the balls final speed?
Answer:
4.2 m/s
the balls final speed is V (m/s)
because the clay ball hits another and the two stick together
=> 0,35.4,2 + 0,35.4,2 = (0,35 + 0,35).V
<=> 2,94 = 0,7V
<=> V = 2,94/0,7 = 4,2
For a clay ball with a mass of 0.35 kg, the ball's final speed is mathematically given as
V2= 4.2
What is the balls final speed?Question Parameter(s):
A clay ball with a mass of 0.35 kg
Hits another 0.35 kg ball at rest and the two stick together.
The first ball's initial speed is 4.2m/s.
Generally, the equation for the conservation of momentum is mathematically given as
M1v1=m2v2
Therefore
0.35*4.2 + 0.3*5.4.2 = (0.35 + 0.35)*V
2,94 = 0,.7V
V2 = 2.94/0.7
V2 = 4.2
In conclusion
V2= 4.2
Read more about Speed
https://brainly.com/question/4931057
#SPJ2
calculate the ground pressure of a 90kg gas cylinder the diameter of the cylinder is 1.1 m
Answer:
P = 928.09 Pa
Explanation:
Given that,
Mass of a gas cylinder, m = 90 kg
The diameter of the cylinder, d = 1.1 m
Radius, r = 0.55 m
We need to find the ground pressure. The pressure is equal to force per unit area. So,
[tex]P=\dfrac{F}{A}\\\\P=\dfrac{mg}{\pi r^2}\ (A\ is\ area\ of\ base)\\\\P=\dfrac{90\times 9.8}{\pi \times (0.55)^2}\\\\P=928.09\ Pa[/tex]
So, the ground pressure is 928.09 Pa.
What skills are used to move the body from one place to another? *
Answer:
Walking, Running , Hopping, Jumping, Leaping
Explanation:
Because they made you move from one place to another
Which of the following is NOT a correct statement regarding the theory of evolution?
The offspring of a species compete with each other for limited resources.
All organisms in a species are genetically unique.
The offspring of a species with the most favorable traits have the best chance for survival.
All organisms evolve at the same rate.
the answer is "all organisms evolve at the same rate" :)
Answer:
answer is b
Explanation:
Is the potential energy on the surface of Earth zero?If not,what will be it's value?
Answer:
Potential energy does not have an absolute measurement. It is always relative to some reference point. Gravitational potential always increases when you go up and decreases when you go down. But the choice of a zero point is arbitrary.
If you’re dropping objects onto the ground, then choosing the ground as a zero point makes the calculations easier. But you could just as easily make the zero point the top of Mt. Everest, and all the answers would turn out the same. Up still means more energy and down means less, but now the PE of an object at sea level would have a negative sign, but not as negative as an object ten meters above sea level.
So everything would still work fine.
In fact, planetary astronomers take this idea to extremes. Instead of the top of Mt. Everest, they set the zero point for potential energy as infinitely high—so far “up” that gravity is so weak that going “up” another kilometer doesn’t gain you any energy. Then the value for potential energy everywhere else in the universe anywhere near a planet has a negative sign, but just as before, all the answers in relative terms turn out fine.
Explanation:
PLEASE MARK ME AS BRAINLIEST
An old lorry is 20% efficient at converting the
chemical energy in the diesel into useful
mechanical energy. How many joules of
mechanical energy are produced when 600
joules of chemical energy have been used by
the engine?
Answer:
The amount of mechanical energy produced by the old lorry when 600 Joules of chemical energy have been used by the engine, M.E. is 120 Joules
Explanation:
The question is a word problem on the relationship between energy efficiency and energy consumption
The given parameters of the old lorry are;
The chemical energy to mechanical energy conversion efficiency of the old lorry = 20%
The amount of chemical energy used by the engine = 600 joules
Let 'M.E.' represent the amount of mechanical energy produced by the old lorry, we have;
[tex]Energy \ Efficiency = \dfrac{Energy \ produced }{Total \ Energy \ Taken \ In \ or \ Used} \times 100[/tex]
Therefore, the for the old lorry, we have;
[tex]20\% = \dfrac{M.E. \ Produced}{600 \ Joules} \times 100[/tex]
∴ M.E. Produced = 20/100 × 600 J = 120 J
The amount of mechanical energy produced by the old lorry when 600 Joules of chemical energy have been used by the engine, M.E. = 120 Joules
A rock has 750 J of potential energy as it sits on a ledge. If the rock were pushed off the ledge, how much would it have just before it hit the ground?
Answer:
the 750 j will have potential energy is 375
Explanation:
750/2 is 375
The law of universal gravitation describes the relationships between
Group of answer choices
A. unbalanced force, balanced force, and net force.
B. speed, distance, and time.
C. speed, velocity, and acceleration.
D .force, mass, and distance.
Answer:
D force mass and distance
2. A large collection of stars, gas, and dust is called a _____?
I WILL MARK BRAINLIST PLEASE HELP!
Describe how the motion of the particles within the popcorn changes as thermal energy is transferred. How do they start out? How does that change? What other transformations occur?
Answer:
Generally, when thermal energy is transferred to a material, the motion of its particles speeds up and its temperature increases. There are three methods of thermal energy transfer: conduction, convection, and radiation. ... Convection transfers thermal energy through the movement of fluids or gases in circulation cells.
Explanation:
Answer:
Why do you think transferring energy into or out of a substance can change the molecules’ freedom of movement?
Explanation:
We know that transferring energy can cause a change in molecules' freedom of movement. Another way to say this is that transferring energy into or out of a substance can cause a phase change.
A force of 200N was required to pull the arrow back 0.25m in the bow. If the archer were to release the bowstring how much energy would the arrow gain?
Answer:
50 Joules
Explanation:
Work (J) = Force (N) x Distance (m)
Work (J) = 200 N x 0.25 m
Work = 50 Joules
Work is converted to kinetic energy when the arrow is released.
Un bloque de 3 kg en reposo se deja libre a una altura de 5 m sobre una rampa curva y sin rozamiento. Al pie de la rampa se encuentra un resorte de constante k = 400 N/m, como se muestra en la fig. El objeto desliza por la rampa y llega a chocar contra el resorte comprimiéndolo una distancia x antes de que quede en reposo momentáneamente. Determinar: a) La velocidad con la que el bloque alcanza al resorte. ____________________ b) La distancia x que el bloque comprime al resorte. __________________ c) La velocidad con la que el bloque es expulsado por el resorte. ____________________ d) La altura que alcanza sobre la parte curva. ________________ e) ¿Alcanzará la misma altura si la rampa no está libre de rozamiento? ___________________
Answer:
a) La velocidad del bloque cuando llega al resorte es de aproximadamente 9,9 m / s
b) La distancia a la que se comprime el resorte es de aproximadamente 0,86 m
c) La velocidad con la que el resorte expulsa el bloque es de aproximadamente 9,9 m / s
d) La altura que alcanza el bloque es de 5 metros.
e) El bloque no alcanzará la misma altura si la rampa no está libre de fricción
Explanation:
a) Los parámetros dados del bloque son;
La masa del bloque, m = 3 kg
La altura a la que se coloca el bloque, h = 5 m
La constante de resorte, k = 400 N / m
La aceleración debida a la gravedad, g = 9,8 m / s²
La energía potencial de un cuerpo, P.E. = m · g · h
Por tanto, la energía potencial inicial del bloque, P.E. se da como sigue;
P.E. = 3 kg × 9,8 m / s² × 5 m = 147 julios
P.E. = 147 julios
La energía cinética del bloque al pie de la rampa, K.E. = 1/2 · m · v²
Dónde;
v = La velocidad del bloque cuando llega al resorte
Por lo tanto, para el bloque dado tenemos;
K.E. = 1/2 · m · v² = 1/2 × 3 kg × v²
Por el principio de conservación de la energía, tenemos;
El PE. del bloque en reposo a una altura de 5 m = La energía cinética al pie de la rampa. K.E.
∴ P.E. = K.E.
147 J = 1/2 × 3 kg × v²
v² = 147 J / (1/2 × 3 kg) = 98 m² / s²
v = √ (98 m² / s²) = 7 · √2 m / s
v = 7 · √2 m / s ≈ 9,9 m / s
b) La energía recibida por el resorte comprimido, E = 1/2 · k · x²
Dónde;
k = La constante del resorte = 400 N / m
x = La distancia a la que se comprime el resorte
Por el principio de conservación de la energía, tenemos;
La energía recibida por el resorte comprimido, E = La energía potencial inicial del resorte, P.E.
∴ E = 1/2 · k · x² = P.E.
De lo que tenemos;
E = 1/2 × 400 N / m × x² = 147 julios
x² = 147 Julios / (1/2 × 400 N / m) = 0,735 m²
x = √ (0,735 m²) = 0,7 · √ (3/2) m ≈ 0,86 m
La distancia a la que se comprime el resorte = x ≈ 0.86 m
c) La velocidad con la que el resorte expulsa el bloque se indica a continuación;
La energía en el resorte = 1/2 · k · x² = La energía cinética dada al bloque, 1/2 · m · v²
∴ 1/2 · k · x² = 1/2 · m · v²
∴ La velocidad con la que el bloque es expulsado por el resorte, v = La velocidad con la que el bloque llega al resorte = 7 · √2 m / s
La velocidad con la que el resorte expulsa el bloque, v = 7 · √2 m / s ≈ 9,9 m / s
d) La altura que alcanza el bloque también viene dada por la siguiente relación anterior;
P.E. = K.E.
∴ m · g · h = 1/2 · m · v²
v = 7 · √2 m / s
De donde tenemos h = La altura inicial del bloque en la rampa = 5 metros
e) El bloque no alcanzará la misma altura si la rampa no está libre de fricción porque se utilizará energía para superar la fuerza de fricción
a) La velocidad final del bloque es aproximadamente 9.903 metros por segundo.
b) El resorte se deforma 0.858 metros.
c) Por el principio de la conservación de energía y sabiendo la ausencia de fuerzas disipativas, la velocidad del objeto expulsado del resorte es aproximadamente 9.903 metros por segundo.
d) Por el principio de la conservación de energía y si existieran fuerzas disipativas, la altura máxima sería menor a la hallada en el punto a).
a) Conforme a la situación de este problema, la energía cinética traslacional final ([tex]K[/tex]), en joules, es igual a la energía potencial gravitacional inicial ([tex]U[/tex]), en joules.
[tex]U = K[/tex] (1)
Por las definiciones de las energías cinética traslacional y potencial gravitacional expandimos la ecuación anterior:
[tex]m\cdot g\cdot h = \frac{1}{2}\cdot m\cdot v^{2}[/tex] (1)
Ahora despejamos la velocidad de esa ecuación:
[tex]v = \sqrt{2\cdot g\cdot h}[/tex]
Donde:
[tex]m[/tex] - Masa del bloque, en kilogramos.[tex]g[/tex] - Aceleración gravitacional, en metros por segundo al cuadrado.[tex]h[/tex] - Altura inicial del bloque, en metros.[tex]v[/tex] - Velocidad final del bloque, en metros por segundo.Si sabemos que [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] y [tex]h = 5\,m[/tex], entonces la velocidad final del bloque es:
[tex]v = \sqrt{2\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (5\,m)}[/tex]
[tex]v\approx 9.903\,\frac{m}{s}[/tex]
La velocidad final del bloque es aproximadamente 9.903 metros por segundo.
b) Por el principio de conservación de la energía, la energía cinética traslacional inicial es igual a la energía potencial elástica final, cuyas fórmula es la siguiente:
[tex]\frac{1}{2}\cdot k\cdot x^{2} = \frac{1}{2}\cdot m \cdot v^{2}[/tex] (2)
Where:
[tex]k[/tex] - Constante de resorte, en newtons por metro.[tex]x[/tex] - Deformación del resorte, en metros.Ahora despejamos la deformación del resorte:
[tex]x = \sqrt{\frac{m}{k} }\cdot v[/tex] (3)
Si sabemos con [tex]k = 400\,\frac{N}{m}[/tex], [tex]m = 3\,kg[/tex] y [tex]v \approx 9.903\,\frac{m}{s}[/tex], entonces la deformación del resorte es:
[tex]x = \sqrt{\frac{3\,kg }{400\,\frac{N}{m} } }\cdot \left(9.903\,\frac{m}{s} \right)[/tex]
[tex]x \approx 0.858\,m[/tex]
El resorte se deforma 0.858 metros.
c) Por el principio de la conservación de energía y sabiendo la ausencia de fuerzas disipativas, la velocidad del objeto expulsado del resorte es aproximadamente 9.903 metros por segundo.
d) Por el principio de la conservación de energía y si existieran fuerzas disipativas, la altura máxima sería menor a la hallada en el punto a).
Invitamos cordialmente a ver este problema sobre el principio de conservación de la energía: https://brainly.com/question/16582988
When should you get a vaccine
Answer:
Explanation:
as soon as you are offered one :P
!!!URGENT!!! Worth 100 points!!
A snail travels down the sidewalk at 25 mm/min for 4 minutes How far does the snail travel?
The snail would travel 100mm
Each minutes is 25mm and it took 4 minutes
4 x 25 = 100
or
25+25+25+25=100
The outside diameter of your teacher's rear bicycle tire is 16 inches. How far will he travel if the rear wheel makes 1200 revolutions on the road?
Answer:
241,274.32 inches
Explanation:
How far will he travel if the rear wheel makes 1200 revolutions on the road?
Since the rear wheel makes one revolution in the distance of a circumference of a circle, C with diameter, d = 16 inches
C = πd²/4
So, the distance, travelled in 1200 revolutions is D = 1200 × C = 1200πd²/4
Substituting d = 16 into D, we have
D = 1200πd²/4
D = 1200π(16)²/4
D = 76800π
D = 241,274.32 inches
PLS ANSWER FAST WILL GIVE BRAINLY!!!
how do scientist measure mass of an atom?
Determine the torque
produced by a perpendicular force of 75
N at the end of a 0.2 m wrench.
Answer:
Explanation:
the answer is C.)
The torque produced by a perpendicular force of 75 N at the end of a 0.2 m wrench is 15 Nm.
What is torque?The force which causes the object to rotate about any axis is called torque. In math form, it is equivalent to the product of force and perpendicular distance.
Torque is a twisting or turning force that frequently results in rotation around an axis, which may be a fixed point or the center of mass. The ability of something rotating, such as a gear or a shaft, to overcome turning resistance is another way to think of torque.
Given:
The perpendicular force on the wrench, P = 75 N,
The length of the wrench, r = 0.2 m,
Calculate the torque of the wrench as shown below,
The torque of the wrench = r × P × sin a
Here, the force is perpendicular hence, a = 90°
The torque of the wrench = 0.2 × 75 × sin90
The torque of the wrench = 15 × 1
The torque of the wrench = 15
Thus, the torque on the wrench is 15 Nm.
To know more about torque:
https://brainly.com/question/28220969
#SPJ2
please help me out here
Answer:
Explanation:
it's blocked for me...it was unblocked but you know how everything else is blocked
Since the universe is infinite, the probability of events and reoccurrence is infinite. So that means that there is a chance, if not 100% chance, that SOMEWHERE there is another earth, with another you, living the same life, at the same time. What are your thoughts about this??? that's so crazy to me
Answer:
That insane it might be true because a planet sometimes quoted to be an Earth 2.0 or Earth's Cousin based on its characteristics; also known by its Kepler Object of Interest designation KOI-7016.01) is an exoplanet orbiting the Sun-like star Kepler-452 about 1,402 light-years (430 pc) from Earth in the constellation Cygnus.
Explanation:
Question 2 options:
A ________ is an ability that allows you to perform a specific task effectively.
Answer: The answer is Skill
Explanation:
A student attaches a block to a vertical spring of unknown spring constant so that the block-spring system will oscillate if the block-spring system is released from rest at a vertical position that is not the system’s equilibrium position. The student varies the object’s mass and uses a stopwatch to determine the time it takes the object to make one oscillation. The student creates the graph that is shown. The slope of the line of best fit is equal to which of the following quantities?
Answer:
D: 2π/√k0
Explanation:
I got it right
The slope of the line of best fit is the quantity 2π/√ko.
The line of best fits is used to show the relationship between two variables. The nature of the graph shows the relationship between the variables.
We can see that this is a graph of the period of oscillation against the square root of the mass of the body. The slope of the line of best fit is the quantity 2π/√ko.
Learn more about oscillation: https://brainly.com/question/3930479
What are your initial thoughts on pro athletes salaries? Do you believe that athletes are paid too much? Why or why not
Answer:
Pro athletes are professional athletes, they are professional in their field. They are not paid too much in my thoughts.
Explanation:
I do not believe that professional athletes are paid too much or over paid. These group of athletes have become professionals in their fields after many years of training, they are highly talented with extra ordinary physical abilities. More so, fans love to watch them play and pay to watch them because they enjoy them. They are get sponsors due to the great crowd they attract.
A wave has a period of 2 seconds and a wavelength of 4 meters. Calculate its frequency and speed.
Note: Recall that the frequency of a wave equals 1/period & the period of a wave equals 1/frequency.
Answer:
frequency = 0.5 /s
speed = 2m/s
Explanation:
frequency = 1/period = 1/2 = 0.5 /s
speed = frequency × wavelength
= 0.5 × 4 = 2m/s
A volume of 25 milliliters is the same as a volume of ____________________ cubic centimeters.
Answer:
25 cm³
Explanation:
In the conversion of units, we know that are one cubic centimeters (cm³) in a milliliter (mL) .
1 milliliter = 1 cubic centimeter
25 milliliters = 25 cubic centimeters
Therefore, a volume of 25 milliliters is the same as a volume of 25 cubic centimeters.
This ultimately implies that, the volume of an object in milliliters is equivalent to its volume in cubic centimeters.
Why does the Moon appear red during a lunar eclipse?
1.)Because the sunlight bends as it passes through the Earth's atmosphere
2.)Because the sunlight bends as it passes through the Moon's atmosphere
Answer:
Image result for Why does the Moon appear red during a lunar eclipse?
A lunar eclipse takes place when the sun, Earth and moon line up in space. The moon passes through Earth's shadow. ... Bottom line: The moon can look red during a total lunar eclipse because of sunlight that's filtered and refracted by Earth's atmosphere
How can I skip class:
A: Fake sick.
B: Have a heating pad on my heat to have a fake fever.
C: Fake barf
D: Act fine until a test the neb sick
Answer:
c gl
Explanation:
::::::::::::::::::::::::
A steel ball bearing is released from a height H and
rebounds after hitting a steel plate to a height H.
What is true about the collision with the steel plate?
Answer:
ELASTIC collision
kinetic energy is conservate
Explanation:
As the ball bounces to the same height, it can be stated that the impact with the floor is ELASTIC.
As the floor does not move the conservation of the moment
po = pf
-mv1 = m v2
- v1 = v2
So the speed with which it descends is equal to the speed with which it rises
Therefore the kinetic energy of the ball before and after the collision is the same
Answer:
CORRECT (SELECTED)
It is elastic since kinetic energy was conserved.
Explanation:
If Mars were 10 times closer to the Sun, then the Sun would attract Mars with
times
(less or more) force.
Answer:
more
Explanation:
The velocity does not change greatly between Mars and Venus —explained Dong— but Venus's closer proximity to the sun boosts the density by almost a factor of 4.5. This would mean that atmosphere on Mars would be lost even more rapidly than at its current position.
which system of units is used by only a small number of countries in the world, including the u.s
Answer:
imperial system
Explanation:
Answer:
british system
Explanation:
A P E X
