A 2000 kg truck moving at 10 m/sec to the right strikes a 500 kg car moving to the left with a velocity of 20 m/s. If the two bodies stick together and moving to the right after the collision, what is the final velocity of the combined mass?

The frequency and period of a vibrating mass on a spring are affected by the mass of the object, the spring constant, and the amplitude of the vibration. The frequency is the number of complete back-and-forth vibrations per second, while the period is the amount of time it takes for one complete vibration.

The mass of the object affects the frequency and period because it affects the amount of force exerted on the spring. A larger mass will require more force to be exerted on the spring to produce the same amount of displacement as a smaller mass. This means the frequency and period will increase as the mass increases.

The spring constant affects the frequency and period because it determines how stiff the spring is. A stiffer spring requires more force to produce the same amount of displacement as a looser spring. Therefore, the frequency and period will increase as the spring constant increases.

The amplitude of the vibration affects the frequency and period because it determines how much the mass will be displaced from its equilibrium position. A larger amplitude will require more force to produce the same amount of displacement as a smaller amplitude, meaning the frequency and period will increase as the amplitude increases.

for such more question on  frequency

https://brainly.com/question/254161

#SPJ11

At the position shown in the diagram, the rock's acceleration is pointing towards the centre of the circle. This means that the acceleration is directed downwards, in the opposite direction of gravity. The acceleration is a vector, so it can be represented as "vertical", pointing directly downwards.

At the position shown, the direction of the rock's acceleration is downwards. This is because the force acting on the rock is gravity, which is pulling the rock towards the center of the circle. Thus, the direction of the acceleration is always towards the center of the circle in vertical circles.

The motion of the rock is a combination of uniform circular motion and free fall. When the rock is at the topmost point of the circle, its velocity is zero, and it begins to fall under the influence of gravity. At this point, the acceleration of the rock is solely due to gravity and is equal to g (acceleration due to gravity).As the rock moves down the circle, the force of gravity and the tension force acting on the string combine to provide a net force acting towards the center of the circle.

This provides the centripetal acceleration that keeps the rock moving in a circle. At the bottommost point of the circle, the tension force in the string becomes zero, and the acceleration of the rock is solely due to gravity, but this time it acts in the direction of the tension force (i.e., towards the center of the circle).

For more such questions on gravity

https://brainly.com/question/1752905

#SPJ11

Cleats or dogs are pieces of metal that are temporarily attached to the weldment’s parts to enable them to be forced into place. Anytime these pieces of metal are used, they must be removed, and the area around Smooth

In this case option D

Cleats or dogs are pieces of metal that are commonly used in welding to temporarily attach the parts of the weldment in place. They are typically small metal pieces with angled ends that can be clamped or welded onto the parts being joined to hold them in the correct position during the welding process.

Once the welding is completed, the cleats or dogs must be removed and the area where they were attached must be ground smooth.

This ensures that the final welded joint has a smooth and even surface and that there are no residual metal pieces that could interfere with the joint's structural integrity.

To know more about " Cleats or dogs. here

https://brainly.com/question/28447542

#SPJ4

The positions marked by the straight arrows in the image are the first quarter and third quarter phases of the Moon the tide that occurs is called a "neap tide".

What is neap tide?

During these phases, the Moon and the Sun are at right angles to each other with respect to the Earth, which causes the gravitational forces of the Moon and the Sun to partially cancel out. As a result, the tidal range is at its minimum, and the tide that occurs is called a "neap tide". Therefore, the answer is "neap".

What is gravitational forces?

Gravitational forces refer to the attractive force that exists between any two objects in the universe that have mass. This force is governed by Newton's law of universal gravitation, which states that the gravitational force between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between their centers.

This means that the larger the mass of the objects, the stronger the gravitational force between them, and the farther apart they are, the weaker the gravitational force. Gravitational forces are responsible for keeping celestial bodies, such as planets, moons, and stars, in their orbits, and for the phenomena of tides on Earth caused by the gravitational pull of the Moon and the Sun.

To know more about neap tide, visit:

https://brainly.com/question/29417771

#SPJ1

Complete question is: "neap tide" type of tide occurs when the moon is in the positions marked by the straight arrows in this image.

True. The compass would point south, towards the Magnetic South Pole, if it were free to swivel in any direction.

If you were standing directly at the Earth's North Magnetic Pole, a compass would point towards the Magnetic South Pole. A compass is a simple instrument used to determine direction. It is based on the principle that Earth has a magnetic field that attracts certain metals, such as iron. The needle on a compass is a small magnet that is suspended so that it can rotate freely. When the compass is held level, the needle is able to rotate until it comes to rest along the magnetic lines of force, indicating the direction of the magnetic north. However, the magnetic North Pole is not the same as the geographic North Pole, which is the point where the Earth's axis of rotation intersects with the surface of the planet.

The Earth's magnetic field is generated by the motion of molten iron in the outer core. As a result, the magnetic field is not perfectly aligned with the axis of rotation. It is tilted at an angle of approximately 11.5 degrees. This means that the magnetic North Pole is not located at the same point as the geographic North Pole. If you were standing directly at the Earth's North Magnetic Pole, a compass would point towards the Magnetic South Pole. This is because the North and South Poles of a magnet are opposite. When the north-seeking pole of a compass needle is placed near the North Magnetic Pole, it will be attracted to the south-seeking pole of the Earth's magnetic field, which is located in the vicinity of the Magnetic South Pole.

To learn more about Magnetic South Pole ;

https://brainly.com/question/30221661

#SPJ11

a) We can use Coulomb's law to calculate the electric field vector at the point (8,16) m due to the point charge placed on the x-y plane.

The electric field vector is given by E = F/q, where F is the force exerted on the point charge and q is the magnitude of the charge. The force exerted on the charge is (21 + 4j) N. The magnitude of the charge is given by q = F/E, where E is the electric field at the point (8,16) m. Therefore, we have:

E = F/q = (21 + 4j) N / (-15 nC) = (-1.4 - 0.267j) x 10⁶ N/C

So, the electric field vector at the point (8,16) m is (-1.4 - 0.267j) x 10⁶N/C.

b) To determine the magnitude and sign of the point charge that produces the electric field calculated in part (a), we can use the formula for the electric field of a point charge. The electric field at a point P due to a point charge q located at the origin is given by:

E = kq/r²

q is the charge of the point charge, and r is the distance between the point charge and point P. We can rearrange this equation to solve for q:

q = Er²/k

for E and r (r = sqrt(8² + 16²) = 17.89 m) we get:

q = (-1.4 - 0.267j) x 10^6 N/C x (17.89 m)² / (8.99 x 10⁹ N m²/C²) = -5.37 nC

So, the magnitude of the point charge is 5.37 nC and its sign is negative, indicating that it is an additional negative charge placed at the origin that produces the electric field calculated in part (a).

To know more about magnitude , visit :

https://brainly.com/question/14452091

#SPJ1

The electric field vector at the point (8, 16) m is (-5.53i - 11.07j) N/C. and

the magnitude of the point charge is 2.11 nC and the sign is negative, indicating that it is the same as the original point charge placed on the x-y plane.

The steps are as following to calculate the given question :-

a. To calculate the electric field vector at the point (8, 16) m due to the -15 nC point charge, we can use Coulomb's law:

The distance between the two points is given by:

r = sqrt[(8-0)^2 + (16-0)^2] = 17.8885 m

The electric field vector is given by:

E = k*q/r^2 * r_hat

where k is the Coulomb constant (k = 9x10^9 N*m^2/C^2), q is the charge of the point charge, r_hat is the unit vector pointing from the point charge to the point of interest.

Since the point charge is negative, the electric field vector points towards the point charge. Therefore, r_hat = -icosθ - jsinθ, where θ is the angle between the vector pointing from the point charge to the point of interest and the x-axis.

θ = atan2(16, 8) = 63.43 degrees

So, r_hat = -0.4472i - 0.8944j

Plugging in the values, we get:

E = (9x10^9 Nm^2/C^2)(-15x10^-9 C)/(17.8885m)^2 * (-0.4472i - 0.8944j)

E = -5.53i - 11.07j N/C

Therefore, the electric field vector at the point (8, 16) m is (-5.53i - 11.07j) N/C.

b. To find the magnitude and sign of the point charge that produces this electric field, we can use the formula:

E = k*q/r^2

where E is the magnitude of the electric field, k is the Coulomb constant, q is the charge of the point charge, and r is the distance between the point charge and the point of interest.

Plugging in the values, we get:

E = (9x10^9 N*m^2/C^2)*q/(17.8885m)^2

-11.07 N/C = (9x10^9 N*m^2/C^2)*q/(17.8885m)^2

Solving for q, we get:

q = -2.11x10^-9 C

Therefore, the magnitude of the point charge is 2.11 nC and the sign is negative, indicating that it is the same as the original point charge placed on the x-y plane.

To know more about charge visit :-

https://brainly.com/question/18102056

#SPJ1

When the snow melts, it will form liquid water, and the volume of the water will be equal to the volume of the original snow sample. Therefore, the volume of liquid water produced by the melting of the 24 ml sample of snow is also 24 ml.

If the snow has a density of 0.5 g/ml, then the mass of the snow is:

mass = density x volume = 0.5 g/ml x 24 ml = 12 g

Therefore, the volume of liquid water produced by the melting of the 24 ml sample of snow is also 24 ml.

What is volume?

Volume of liquid refers to the amount of space that a liquid occupies. It is a measure of the three-dimensional space that the liquid occupies and is usually measured in units such as liters, milliliters, gallons, or fluid ounces. The volume of a liquid is determined by the shape of the container in which it is placed, and it can be measured directly using a graduated cylinder or other volumetric measuring device.

What is density?

Density is a physical property of matter that describes how much mass is present in a given volume of a substance. It is defined as the mass of a substance per unit volume, and is typically measured in units such as grams per milliliter (g/mL) or kilograms per cubic meter (kg/m³).

To know more about volume, visit:

https://brainly.com/question/13338592

#SPJ1

(a). Here is a diagram of the situation:

        |           Q (-40 pC)

        |             ^

        |             |

 --------|----------- 3 m

        |             |

        |             |

        |             |

        |             |

        |             |

        |           q (50 pC)

        |_____________|___________> x = 0 m

            3 m

(b).  The net electric flux through the closed cylindrical surface is -100.5 N m^2/C.

We can use Gauss's Law to calculate the electric flux through the cylindrical surface.

Therefore, the net electric flux through the closed cylindrical surface is -100.5 N m^2/C.

What is an electric flux?

Electric flux is the measure of the total electric field passing through a surface. It is a scalar quantity, and its unit is the volt meter (V m) or newton meter squared per coulomb (N m^2/C).

To know more about gauss's law,visit:

https://brainly.com/question/16735321

#SPJ1

Explanation:

a) looks correct  EXCEPT   KE and GPE labels are reversed ( if the one on the L is initially and the R one is at max height)

b) looks good

c)  incorrect       total energy will be KE + GPE =   57.51 J at any point

d) correct

The constant acceleration of the train is 50/9 m/s².

The two balls will collide at a height of approximately 10.204 meters above the ground.

Using the kinematic equations of motion, we have:

distance = initial velocity * time + 1/2 * acceleration * time^2

For the first phase of acceleration, the initial velocity is zero, the time is 5 minutes = 300 seconds, and the distance traveled is unknown. So we have:

d1 = 0 + 1/2 * a * (300)^2

For the second phase of constant speed, the initial velocity is v, the time is 5 minutes = 300 seconds, and the distance traveled is also unknown. So we have:

d2 = v * 300

For the third phase of deceleration, the initial velocity is v, the time is also 5 minutes = 300 seconds, and the distance traveled is again unknown. So we have:

d3 = v * 300 + 1/2 * (-a) * (300)^2

The total distance traveled is the sum of these three distances:

distance = d1 + d2 + d3 = 1/2 * a * (300)^2 + v * 600 - 1/2 * a * (300)^2 = v * 600

Since the total distance traveled is given as 10 km = 10000 m, we have:

v * 600 = 10000

Solving for v, we get:

v = 10000/600 = 50/3 m/s

Now we can use the second equation above to find a:

d2 = v * 300 = (50/3) * 300 = 5000 m

Therefore, the constant acceleration of the train is:

a = 2 * (5000 - 1/2 * a * (300)^2) / (300)^2 = 50/9 m/s^2

The constant acceleration of the train is 50/9 m/s^2.

Problem 2: The height of the first ball dropped is given as 10m. Let's assume the height of the collision point is h meters above the ground.

Using the kinematic equation for free fall, we have:

h = 10 + 1/2 * g * t^2

where g is the acceleration due to gravity, which is approximately 9.81 m/s^2, and t is the time it takes for the second ball to reach the collision point after being thrown upwards.

The initial upward velocity of the second ball is 10 m/s, and we know that at the collision point, its velocity will be zero, since it will have reached its maximum height and will be momentarily at rest before falling back down.

Using the kinematic equation for motion with constant acceleration, we have:

0 = 10 + (-g) * t

Solving for t, we get:

t = 10/g = 10/9.81 seconds

Substituting this value of t into the first equation, we get:

h = 10 + 1/2 * 9.81 * (10/9.81)^2

Simplifying, we get:

h = 10.204 m

The two balls will collide at a height of approximately 10.204 meters above the ground.

Learn more about acceleration on;

https://brainly.com/question/14344386

#SPJ1

Here ya go! i think this will help!

Answer: 8.38 revolutions per second

Explanation:

Before the second disk is dropped, the initial angular momentum of the system is given by:

L = I1 * w1

where I1 is the moment of inertia of the first disk, and w1 is its angular velocity.

Substituting the given values, we have:

L = (25 kg m^2) * (2 rev/sec * 2π rad/rev) = 100π kg m^2/s

When the second disk is dropped onto the rotating disk, the total moment of inertia of the system will be the sum of the moment of inertia of the first disk and the moment of inertia of the second disk:

Itotal = I1 + I2/2

where I2/2 is the moment of inertia of the second disk, which is half as large as that of the first disk.

Substituting the given values, we have:

Itotal = (25 kg m^2) + (12.5 kg m^2) = 37.5 kg m^2

Conservation of angular momentum requires that the initial angular momentum of the system be equal to its final angular momentum, so:

L = Itotal * wf

where wf is the final angular velocity of the combined disk.

Solving for wf, we get:

wf = L / Itotal = (100π kg m^2/s) / (37.5 kg m^2) ≈ 8.38 rev/sec

Therefore, the new rotational speed of the combined rotating object is approximately 8.38 revolutions per second.

Answer:

it's b

Explanation:

no shade, direct sunlight

The correct answer is a. x-rays is produced by the sudden deceleration of high speed electrons.

What is x-rays?

When high-speed electrons are suddenly decelerated or slowed down, they release energy in the form of electromagnetic radiation. This process is known as bremsstrahlung or "braking radiation". The energy of the emitted radiation depends on the initial speed of the electrons and the degree of deceleration.

In the case of bremsstrahlung, the emitted radiation can range from radio waves to gamma rays, but the highest energy radiation produced by bremsstrahlung is x-rays. Therefore, the sudden deceleration of high-speed electrons produces x-rays.

X-rays are ionizing radiation, meaning that they have enough energy to remove electrons from atoms or molecules, which can cause damage to living tissue. Therefore, exposure to X-rays should be limited and controlled to minimize health risks.

To know more about x-rays, visit:

https://brainly.com/question/29790297

#SPJ1

Complete question is: x-rays is produced by the sudden deceleration of high speed electrons.

Explanation:

The disparity between women's rights in urban and rural areas in Eritrea can be attributed to various factors such as cultural beliefs, traditional values, lack of education, and access to resources. Urban areas generally have more access to education, healthcare, and job opportunities, which can empower women and increase their participation in society. However, rural areas are often more traditional and conservative, and women may face more barriers to accessing education, healthcare, and employment opportunities.

Laila's conflict about the practice of female genital mutilation for her daughter is likely due to her cultural and social upbringing. While she may recognize the physical and psychological harm that the practice can cause, she may also feel pressure to conform to traditional values and beliefs. Additionally, there may be social consequences for not following the practice, such as being ostracized from the community.

Beyond female genital mutilation, women in Eritrea face various challenges to their rights and equality, including limited access to education, gender-based violence, and discrimination in employment and political representation. Bringing about change would require a multi-faceted approach, including education and awareness-raising campaigns, legal and policy reforms, and empowerment programs for women. It would also require addressing the underlying societal and cultural norms that perpetuate gender inequality.

The safety curtain needs to be loosely draped so that it will move easily with the movement of the actors. This will prevent any potential safety hazards from occurring, such as the curtain becoming stuck or snagging on any props or scenery.

Additionally, it is important for the curtain to not be too tight as this could prevent it from falling properly.
The safety curtain needs to be loosely draped so that it can fall easily in case of an emergency.What is a safety curtain?A safety curtain is a fire-resistant metal or asbestos curtain that is suspended above the stage of a theater. In the case of a fire, the curtain is designed to descend quickly and close off the stage area, preventing flames from spreading to the auditorium and providing an escape route for the actors and stage crew.

In the case of an emergency, the safety curtain must drop down without difficulty. That is why the safety curtain must be loosely draped. The safety curtain is supported by a counterweight and a rope system that is positioned over the stage's proscenium arch.

The safety curtain, for example, is used in theatres to protect the audience in the event of a fire. It's also used as a barrier between the stage and the audience. A fire-resistant cloth or metal shutter that, in the event of a fire, may be lowered to cut off the stage from the rest of the theatre is known as a safety curtain.

For more such questions on safety

https://brainly.com/question/29546272

#SPJ11

The cart has undergone work done is 125 Joules of labor.

To move an object, it must be transformed into energy. Force can be used to transmit energy. The work done is the amount of energy that a force used to move an object.

We must apply the following formula to determine the amount of work done on the cart:

W = K = (1/2)mvf2 - (1/2)mvi2 where m is the cart's mass, vf is the end velocity, and vi is the beginning velocity. K is a symbol for kinetic energy change.

By entering the specified values, we obtain:

[tex]W = (1/2) x 2.0 kg x (15 m/s)^2 - (1/2) x 2.0 kg x (10 m/s)^2[/tex]

[tex]W = (1/2) x 2.0 kg x 225 m^2/s^2 - (1/2) x 2.0 kg x 100 m^2/s^2[/tex][tex]W = (1/2) x 2.0 kg x 225 m^2/s^2 - (1/2) x 2.0 kg x 100 m^2/s^2[/tex]

[tex]W = 125 J[/tex]

To know more about work done visit:-

https://brainly.com/question/8632803

#SPJ1

The net force is negative, which means it is directed towards q₂ and q₃, in the opposite direction to q1.

Coulomb's constant (k) is a proportionality constant found in Coulomb's law. Coulomb's law describes the electrostatic force between two point charges and states that the force is proportional to the product of the charges and inversely proportional to the square of the distance between them.

The mathematical expression for Coulomb's law is:

F = k *q₁* q₂ / r²

where F is the electrostatic force between two point-charges q1 and q2, separated by a distance r. The constant k is known as Coulomb's constant and has a value of approximately 9 × 10⁹ N·m²/C².

The net force on particle q1 is the vector sum of the forces exerted on it by particles q₂ and q₃, which can be calculated using Coulomb's law:

F12 = k * q₁ * q₂ / r₁₂²

F23 = k * q₂ * q₃ / r₂₃²

where k is Coulomb's constant (9 × 10⁹ N·m²/C²), r₁₂ and r₂₃ are the distances between q₁ and q₂, and q₂ and q₃, respectively.

Since the particles are in a straight line, the forces F₁₂ and F₂₃ will be in opposite directions and will cancel each other out to some extent. q1will have net force:

F net = F₁₂ +  F₂₃

To calculate the net force, we need to plug in the given values:

q₁ = -2.35 × 10⁻⁶ C

q₂ =-2.35 × 10⁻⁶ C

q₃= -2.35 × 10⁻⁶ C

r₁₂ = r23 = 0.100 m

Substituting these values, we get:

F₁₂ = (9 × 10⁹ N·m²/C²) * (-2.35 × 10⁻⁶ C)² / (0.100 m)²

= -4.396 N

F₂₃ = (9 × 10⁹ N·m²/C²) * (-2.35 × 10⁻⁶ C)² / (0.100 m)²

= -4.396 N

Therefore, the net force on q1 is:

F net = F₁₂ + F₂₃

= -4.396 N + (-4.396 N)

= -8.792 N

To know more about Coulomb's law, visit:

https://brainly.com/question/506926

#SPJ1

The wavelength of the photon emitted by a hydrogen atom when an electron makes a transition from n = 2 to n = 1 state is 121.6 nm.

It is the most straightforward type of atom, with only one electron in its atomic shell. When an electron in a hydrogen atom moves from one energy level to another, it emits or absorbs a photon of light with a particular energy, E.

This energy difference can be found using the Rydberg formula for hydrogen atom wavelengths.

[tex]λ= 1/((Ry) × (1/ n1^2 - 1/ n2^2))[/tex]

where Ry = 1.097 x 107 m-1, and n1 and n2 are the initial and final quantum numbers of the electron, respectively.

In this instance, the electron goes from the n = 2 state to the n = 1 state.

The energy difference can be calculated as follows:

E = Rh (1/n2² - 1/n1²)

E = 2.18 × 10⁻¹⁸ J(1/12 - 1/22)

E = 1.63 × 10⁻¹⁸ J

The frequency of the photon emitted can be calculated

asv = E/hv = 1.63 × 10⁻¹⁸ J/6.63 × 10⁻³⁴

J.sv = 2.46 × 10¹⁴ Hz

Finally, we can use the formula c = λvc = λv

to find the wavelength of the photon emitted.

c/ v = λ121.6

nm = λ

Therefore, the wavelength of the photon emitted by a hydrogen atom when an electron makes a transition from n = 2 to n = 1 state is 121.6 nm.

for such more question on  wavelength

https://brainly.com/question/10728818

#SPJ11

Answer:

No, you cannot sue the opposing team for emotional trauma resulting from your favorite sports team's loss. Sports are competitive events, and it is expected that one team will win and the other will lose. It is not a legal basis for a lawsuit.

The x, y, and z components of the acceleration are -3.17 x 10^2 m/s^2, -3.17 x 10^2 m/s^2, and -3.17 x 10^-1 m/s^2, respectively.

What is Acceleration?

Acceleration is the rate of change of velocity with respect to time. It is a vector quantity, meaning it has both magnitude and direction. When an object undergoes acceleration, its velocity changes either in magnitude, direction, or both. The formula for acceleration is a = (v_f - v_i) / t, where a is acceleration, v_f is final velocity, v_i is initial velocity, and t is the time taken for the change in velocity.

Using the formula for the magnetic force on a moving charged particle, F = q(v x B), we can find the acceleration vector by dividing the force by the mass of the particle, a = F/m.

The velocity vector v = (0, 3.00 x 10^4, 0) m/s has only a y-component, and the magnetic field vector B = (1.63, 0.980, 0) T has only x- and y-components. Therefore, the cross product of v and B only has a z-component:

v x B = (3.00 x 10^4)i x 0.980j - (3.00 x 10^4)j x 1.63i = -4.71 x 10^7 k m/s

The magnetic force on the charge is then given by:

F = q(v x B) = (1.22 x 10^-8 C)(-4.71 x 10^7 k m/s) = -5.74 x 10^-1 N k

Finally, the acceleration vector is:

a = F/m = (-5.74 x 10^-1 N k)/(1.81 x 10^-3 kg) = (-3.17 x 10^2 i - 3.17 x 10^2 j - 3.17 x 10^-1 k) m/s^2

Learn more about Acceleration from given link

https://brainly.com/question/460763

#SPJ1

The beat frequency produced when a 240-hertz tuning fork and a 246-hertz tuning fork are sounded together would be 6 hertz. Option D.

The beat frequency produced when two tuning forks are sounded together is equal to the absolute value of the difference between their frequencies.

In this case, the beat frequency is:

|240 Hz - 246 Hz| = |-6 Hz| = 6 Hz

Therefore, the answer is (d) 6 hertz.

More on beat frequency can be found here: https://brainly.com/question/14705053

#SPJ1

Explanation:

hope its help thank you

follow nyo po me

Answer:

They are approaching at speed 1.8 + 1.4 = 3.2 m/s

T = 111.8 / 3.2 = 34.94 sec to reach each other

S = V T     where V = 6.5 m/s      Spot's speed

6.5 m/s * 34.9 = 227.1 m

(D) 227.1 m    the distance Spot has to run

Volcanic eruptions are a nonanthropogenic source of carbon dioxide emissions into the atmosphere.

What is volcanic eruption?

A volcanic eruption is a natural or nonanthropogenic source of carbon dioxide emissions into the atmosphere. During a volcanic eruption, carbon dioxide and other gases are released from the Earth's mantle and can contribute to the atmospheric concentration of carbon dioxide.

However, the amount of carbon dioxide emitted by volcanoes is relatively small compared to the amount emitted by human activities such as burning fossil fuels. While volcanic eruptions are a natural source of carbon dioxide emissions, the amount emitted by volcanoes is relatively small compared to the amount emitted by human activities such as burning fossil fuels.

To know more about volcanic eruption, visit:

https://brainly.com/question/30028532

#SPJ1

Complete question is: Volcanic eruptions are a nonanthropogenic source of carbon dioxide emissions into the atmosphere.

the inevitable process causing increase in disorder in the universe and loss in useful energy is called entropy.

A motor uses kn of force to power a vehicle that has a top speed of m/s. The power delivered by the motor is 9.8 kW (kilowatts).

To compute the power delivered by the motor, use the following formula:

P = Fv

Where:

P is the power delivered by the motor

F is the force exerted by the motor

v is the velocity at which the motor delivers the force

First, convert the force from kN to N by multiplying it by 1000 kN = 1000 N.

Now we can substitute the values in the formula:

P = 1000 N × m/sP = 1000 Nm/s

To convert Newton-meter to watts, divide it by the conversion factor 1 W = 1 J/s.

So:P = 1000 Nm/s / 1 WP = 1000 W

To convert watts to kilowatts, divide it by 1000. So:

P = 1000 W / 1000P = 1 kW

The power delivered by the motor is 1 kW.

Rounding it to one decimal place:

P = 1.0 kW

for such more question on power delivered

https://brainly.com/question/17162287

#SPJ11

The ratio of the kinetic energy of projectile B to projectile A is 4:1.

The kinetic energy (KE) of an object is given by the formula

KE = 1/2 * m * v^2

where m is the mass of the object and v is its velocity.

Assuming the two projectiles have the same mass, we can compare their kinetic energies based solely on their velocities:

KE_B/KE_A = (1/2 * m * v_B^2)/(1/2 * m * v_A^2)

= (v_B^2/v_A^2)

Substituting the values given in the problem:

KE_B/KE_A = (600 m/s)^2 / (300 m/s)^2

= 4

Therefore, the ratio of the kinetic energy of projectile B to projectile A is 4:1. Projectile B has four times the kinetic energy of projectile A.

What is kinetic energy?

Kinetic energy is the energy an object possesses by virtue of its motion. It is a scalar quantity that depends on the mass and velocity of the object.

To know more about kinetic energy, visit:

https://brainly.com/question/26472013

#SPJ1

The angle between the polarization direction of the second film and the vertical direction should be approximately 51.4° so that 37.5% of the original light intensity reaches the detector.

Let's denote the angle between the vertical polarization direction of the first film and the polarization direction of the second film by θ. The transmitted intensity of the light after passing through the two films is given by Malus's law:

I = I₀ cos²θ

where I₀ is the initial intensity of the unpolarized light.

We want to find the angle θ that will result in 37.5% of the original light intensity reaching the detector. This means that we want to solve the equation:

I/I₀ = 0.375

Substituting the expression for I into this equation, we get:

cos²θ = 0.375 / I₀

Taking the square root of both sides and using the fact that cosθ is positive when 0 ≤ θ ≤ π/2, we get:

cosθ = √(0.375 / I₀)

θ = arccos(√(0.375 / I₀))

Now we need to substitute the values of I₀ and evaluate the expression for θ. Let's assume that the intensity of the original light is I₀ = 1 W/m². Then we get:

θ = arccos(√(0.375 / 1)) = arccos(0.6124) = 51.4°

Therefore, the angle between the polarization direction of the second film and the vertical direction should be approximately 51.4° so that 37.5% of the original light intensity reaches the detector.

learn more about photodetector here

https://brainly.com/question/16028899

#SPJ1