Answer:
the rotational kinetic energy of the disk is 5,133.375 J
Explanation:
Given;
mass of the disk, m = 27 kg
radius of the disk, r = 1.3 m
angular speed, ω = 15 rad/s
The rotational kinetic energy of the disk is calculated as;
[tex]K.E_{rot} = \frac{1}{2}I \omega^2\\\\ where;\\I \ is \ moment \ of \ inertia\\\\K.E_{rot} = \frac{1}{2} \times (mr^2) \times \omega ^2\\\\ K.E_{rot} = \frac{1}{2} \times (27\times 1.3^2) \times \ 15^2\\\\K.E_{rot} = 5,133.375 \ J[/tex]
Therefore, the rotational kinetic energy of the disk is 5,133.375 J
I am confused and need help with the question above??
What is the three-body problem? Explain at a level so an 8th grader could understand
Answer:
In physics and classical mechanics, the three-body problem is the problem of taking the initial positions and velocities (or momenta) of three point masses and solving for their subsequent motion according to Newton's laws of motion and Newton's law of universal gravitation.[1] The three-body problem is a special case of the n-body problem. Unlike two-body problems, no general closed-form solution exists,[1] as the resulting dynamical system is chaotic for most initial conditions, and numerical methods are generally required.
Hope this answer is right!
give an example of a body with uniform acceleration
Answer:
A ball rolling down the slope.
A bicycle rider is riding the bicycle on tthe slope where both pedals are engaged.
When the surface of a metal is exposed to blue light, electrons are emitted. If the intensity of the blue light is increased (so the light is just brighter), what value will also increase?
A. the maximum kinetic energy of the ejected electrons
B. the number of electrons ejected per second
C. the time lag between the onset of the absorption of light and the ejection of electrons
please help!!!
So, we know that this question is about photoelectric effect.
What is photoelectric effect?
-Photoelectric effect is a phenomenon where electrons are released from a material whenever an electromagnetic radiation such as light, hits it.
-This phenomenon is first discovered by Heinrich Rudolf Hertz in 1887 whereas Albert Einstein, in 1905, resolved the conflict between the photoelectric effect and Maxwell's electromagnetic wave theory of light.
Now to your question, the intensity of light only determines the number of the electrons released, not their maximum kinetic energy because this are proportional to the light's frequency.
Also, there is no time lag detected between the entry of radiation and the emission of electrons in experiments held.
So, with letter A and C out, we can therefore conclude that the answer for this is Letter B
The correct answer is B: the number of electrons ejected per second
The Einstein photoelectric equation states that;
[tex]KE = hf - hfo[/tex]
Where
KE = kinetic energy of the ejected photo electrons
h = Plank's constant
f = frequency of incident light
fo = threshold frequency.
The kinetic energy of ejected photoelectrons depends on frequency of incident photon and not on the intensity of the incident photon.
However, the number of photoelectrons ejected per second depends on the intensity of the incident blue light.
https://brainly.com/question/9260704
What's the meaning of longitudinal?
Answer:
A longitudinal study is a research design that involves repeated observations of the same variables over short or long periods of time. It is often a type of observational study, although they can also be structured as longitudinal randomized experiments.
Explanation:
What is the sum of a systems potential and kinetic energy is equal to?
a. Total Energy
b. Mechanical Energy
c. Thermal Energy
d. Hyper Energy
Answer:
Explanation:
TE = KE + PE which is total energy available to a system is equal to its potential energy plus its kinetic energy, and that total energy will remain throughout the entire "trip", whatever it might be. So a is your answer.
which of the following is incorrect for nuclear forces
a) they are attractive in nature
b) they are short range forces
c) they obey inverse square law
d) they are non conservative in nature
Answer:
c they obey inverse square law
In a wire, when elongation is 4 cm energy stored is E. if it is stretched by 4 cm, then what amount of elastic potential energy will be stored in it?
4E
Explanation:The elastic potential energy of an elastic material (e.g a spring, a wire), is the energy stored when the material is stretched or compressed. It is given by
U = [tex]\frac{1}{2}kx^2[/tex] --------------------(i)
Where;
U = potential energy stored
k = spring constant of the material
x = elongation (extension or compression of the material).
From the first statement;
when elongation (x) is 4cm, energy stored (U) is E
Substitute these values into equation (i) as follows;
E = [tex]\frac{1}{2}k(4)^2[/tex]
E = 8k
Make k subject of the formula
k = [tex]\frac{E}{8}[/tex] [measured in J/cm]
From the second statement;
It is stretched by 4cm.
This means that total elongation will be 4cm + 4cm = 8cm.
The potential energy stored will be found by substituting the value of x = 8cm and k = [tex]\frac{E}{8}[/tex] into equation (i) as follows;
U = [tex]\frac{1}{2}\frac{E}{8} (8)^2[/tex]
U = [tex]\frac{1}{2}{8E}[/tex]
U = [tex]{4E}[/tex]
Therefore, the potential energy stored will now be 4 times the original one.
Let's say you cut open a log of wood with an axe, what type of simple machine are you using? Does it matter how sharp it is?
yes it matters because if it's not sharp it would take all day
Answer:
an axe is a type of machine called a wedge. it does matter how sharp your axe is. if your axe is not sharp then you will have a harder time cutting wood.
Explanation:
Which state has the most fixed shape?
O A. Gas
O B. Solid
O C. Liquid
O D. Plasma
Answer: Liquid
“A substance will take on the shape of an open container if it is a Liquid. Explanation: The major state of matter are solid, liquid and gas. Liquid usually have a definite volume.”
Answer:
solid
Explanation:
Solids are fixed and solid.
If the light ray hits the first mirror and continues to bounce off the other mirrors inside the box, determine where the light ray will eventually hit on the border
Answer: Light ray X will eventually hit the borader
Explanation:
As an IT technician for your company, you have been notified that the Windows domain does not seem to be functioning properly. Being familiar with domains, you are fairly confident you know what the issue is. But just to be safe, you take the applicable time to gather additional information and to identify what, if anything, has changed.
Which of the following is the BEST next step?
A. Determine the appropriate fix.
B. Create a hypothesis.
C. Implement the fix.
D. Identify what has changed.
E. Gather information.
Answer: Create a hypothesis
Explanation:
From the information given, information has been gathered and the identification to ascertain if there's a change. Then, an hypothesis has to be created in order to know what the problem is.
One has to carry out some research in order to know what went wrong and should also validate the hypothesis by consulting with ones peers. By doing this, the most likely causes of the issues will be gotten.
How are galaxies named?
Answer:
Some galaxies are given descriptive names (e.g. "Andromeda", "Whirlpool") if they are particularly distinctive in location or appearance. But most galaxies are known from their designation in a catalogue. One of the earliest catalogues of objects in the sky was made by Charles Messier.
Convert 162 km/h into m/s.
Answer:
45 m/s
Explanation:
162 / 3.6 = 45 m/s
Divide by 3.6 to convert km/h to m/s.
PLEASE HELP WITH THIS QUESTION
What of Newton's 3 laws is represented in this picture?
Answer:
The first law states that an object at rest will stay at rest, and an object in motion will stay in motion unless acted on by a net external force. Mathematically, this is equivalent to saying that if The second law states that the rate of change of momentum of a body over time is directly proportional to the force applied, and occurs in the same direction as the applied force. the net force on an object is zero, then the velocity of the object is constant. The third law states that all forces between two objects exist in equal magnitude and opposite direction: if one object A exerts a force FA on a second object B, then B simultaneously exerts a force FB on A, and the two forces are equal in magnitude and opposite in direction
Explanation:
Q) A farmer moves along the boundary of a
square field of side 10 min 40 s .What will
be the magnitude of displacement of the
farmer at the end of 2 minutes 20 seconds
from his initial position?
Amelia is doing an experiment in which she is
going to burn various solid chemicals to see the
colors of flames they produce. For this laboratory
experiment, what types of safety precautions
should she take?
tie hair back
leave open flame unattended to get a drink
only burn the amount of chemicals as
directed by the lab procedure
put out the flame with water from the eyewash
station
Answer:
tie hair back
only burn the amount of chemicals as
directed by the lab procedure
Explanation:
The correct safety precautions for Amelia to take from the options would be to tie her hair back and to only burn the amount of chemicals recommended by the lab procedure.
With her hair left flowing freely, Amelia runs the risk of the hair catching flame while trying to burn the chemicals according to the procedure. Hence, tying her hair up into one neat bunch will limit the risk of it catching fire while working in the lab.
Also, burning less or more than the amount of chemicals recommended by the procedure may be dangerous or hinder Amelia from getting the right result.
Answer:
1,3
Explanation:
just did it
A trip is taken that passes through the following points in order
Point A Om
Point B 15.0 m
Point C -30.0 m
Point D 20.0 m
Point E -10.0 m
Point F 5.0 m
What is the displacement from Point B to Point E?
A) 5.0 m right
B) 85 m right
C) 25.0 m left
D) 85 m left
Answer:
The displacement from point B to point E is 25.0 m left
5. A wire, resistance 23.6 carries a current. 5.9 A. What is the
potential difference across the wire?
a. V = 139 V
c. V=4V
b. V = 17.7 V
d. V = 0.25 V
Answer:
d
Explanation:
Answer:
B
Explanation:
A motor has an internal resistance of 12.1 Ω. The motor is in a circuit with a current of
4.0 Amps
What is the voltage?
Answer:
Explanation:
V = I * R
V = 4 * 12.1 = 48.4 v
Select the correct answer
If the resistance in a circuit remains constant, what happens to the electric power when the current increases?
OA. The power will increase.
OB.
The power will decrease,
OC. There will be no power.
OD
The current does not affect the power,
Reset
Next
[tex]\large\mathrm{A. Power\:\: will \:\:Increase }[/tex]
Explanation :We know that,
[tex]\large \mathrm{ \boxed{P = I²R}}[/tex]
where,
P = electric powerR = resistanceI = electric currentAnd when resistance is constant, the power of the circuit will change proportionally with the change in electric current. therefore, if current increases then the electric power of the circuit will increase too.
[tex]\large\mathfrak{{\pmb{\underline{\orange{hope \: \: i t \: \: helps \: \: you}}{\orange{.....}}}}}[/tex]
Đặt vào đầu hai dây dẫn cùng một hiệu điện thế bằng nhau U,có điện trở lần lượt là R1 và R2.Ta thấy cường độ dòng điện qua dây dẫn thứ nhất I1 lớn gấp hai lần cường độ dòng điện qua dây dẫn thứ hai I2
Answer:
The resistance ratio of first conductor to the second conductor is 1 : 2.
Explanation:
Current in first conductor = I1
Current in second conductor = I2 , I1 = 2 I2
According to the Ohm's law
[tex]V= I_1R_1..... (1)\\V = I_2 R_2 .... (2)\\[/tex]
From (1) and (2)
[tex]I_1 R_1 = I_2 R_2\\\\2I_2 R_1 = I_2 R_2\\\\2 R_1 = R_2[/tex]
can someone please help
Answer: D
Explanation: because doing a yoga desk program is physical activity, 10k steps is pysical activity, riding a bike or walking/running is also physical activity. so it should be D, all of the above.
A piece of iron has a mass of 30 g and its volume is 6.2 cm3. What is its density?
Answer:
Density = 4.84 g/cm³
Explanation:
Given the following data;
Mass = 30 g
Volume = 6.2 cm³
To find the density of the piece of iron;
Density can be defined as mass all over the volume of an object.
Simply stated, density is mass per unit volume of an object.
Mathematically, density is given by the equation;
[tex]Density = \frac{mass}{volume}[/tex]
Substituting into the equation, we have;
[tex]Density = \frac{30}{6.2}[/tex]
Density = 4.84 g/cm³
5. What type of chemical reaction is shown?
1 point
2 AgNO3 + CuCl2
-
2 AgCl + 2 Cu(NO3)2
Synthesis
Decomposition
Singe Replacement
Double Replacement
Combustion
Answer:
double Replacement
Explanation:
The mutual replacement of radical and ions between the two compounds or molecules is called double replacement.
General equation : AB+CD = AD +B
A 50.0 kg object is moving east at an unknown velocity when it collides with a 60.0 kg stationary object. After collision, the 50.0 kg object is traveling at a velocity of 6.0 m/s 50.0degree N of E and the 60.0 kg object is traveling at a velocity of 6.3 m/s 38degree S of E.
What was the velocity of the 50.0 kg object before collision?
p=m•v is the formula.
The principle of conservation of momentum states that:
momentum before collision = momentum after collisionMomentum = mass * velocityMomentum before collision:
Velocity of 50.0 kg object = v m/s
Momentum of 50.0 kg object = 50 * v
Momentum after collision:
Velocity of the 50.0 kg object = 6.0 m/s 50.0degree N of E
Velocity of the 60.0 kg object = 6.3 m/s 38degree S of E.
Momentum of 50.0 kg object = 50 * 6 = 300 kgm/s
Momentum of 50.0 kg object = 60 * 6.3 = 378 kgm/s
Total momentum after collision = 678 kgm/s
From the principle of conservation of momentum:
50 kg * v = 678 kgm/s
v = 678 kgm/s / 50 kg
velocity, v = 13.56 m/s
Therefore, the velocity of the 50.0 kg object before collision was 13.56 m/s.
Learn more about conservation of momentum at: https://brainly.com/question/7538238
what current flows between a voltage of 120v across a resistance of 30Ω?
Answer:
4 amp
Explanation:
From ohm's law,
V=IR
so,
I=V/R
I=120/30
I=4amp ans..
Loops spaced further apart create a stronger electromagnet. True or False
Answer:
False
Explanation:
Electromagnetic strength is inversely proportional to separation distance
How long does it take you to create 200 Watts of power if you use 1000 J of
work?
Answer:200,000
Explanation:
p=w/t
200=1000/t
t=200*1000
time=200,000
why would the planets move in a straight path if there was no gravitational energy from the sun
Explanation:
The sun's gravitational force is very strong. If it were not, a planet would move in a straight line out into space. The sun's gravity pulls the planet toward the sun, which changes the straight line of direction into a curve. This keeps the planet moving in an orbit around the sun
Answer and Explanation:
The planets would move in a straight path since there would be no source that will be acting upon them (if the sun wasn't there).
Gravitational pull is the amount of force that an object emits. Due to the Sun having a larger mass and a larger gravitational pull, the planets orbit around it.
If, for example, a house was bigger than everything, including planets and stuff, those things would orbit around the house.
A real life example is the moon orbiting Earth. The Earth has a greater magnitude and mass, so it is able to pull the Moon.
Right now the Sun is the external force, as its gravitational pull is moving the planets around. IF the sun was to magically disappear, the planets won't follow an orbit anymore, since there isn't a gravitational pull on them. This leads them to going in a straight line for possibly a couple years.
Eventually, the planets will stop going in a straight line and start to orbit each other, leading to the planets eventually crashing.
External Force = Sun's gravitational pull because of bigger mass
The planets themselves were created after the sun (though some minerals were created before the sun, but that's minerals and not the planet entirely). The sun gives the planet's their motion. The planets, however (though I'm not sure about mercury and Venus) are going super fast, fast enough to where they aren't being pulled into the sun, but not fast enough to go out of orbit.
If the sun goes out magically, the planets, actually yes will continue orbit due to them being in that motion at such a fast rate, but eventually when they are supposed to turn again, (like, to another part of the sun), the would go straight. Eventually, the will get into the orbit of something else and start going around that object's orbit, most likely outcome being that they crash.
The excess force from no gravitational pull will make the planets go in a straight path. Since nothing is acting upon it, the planets would move in a straight line. Imagine if you were on those spinning circle things, and then let go. You would go around it for like a second and then go immediately straight in one direction.
#teamtrees #PAW (Plant And Water)
