A 30 kg child went down a 10 m tall slide. Assuming no energy was lost as friction, what was the child's velocity when he reached the
bottom?
I

Answer:

Continental drift describes one of the earliest ways geologists thought continents moved over time. Today, the theory of continental drift has been replaced by the science of plate tectonics. 

The theory of continental drift is most associated with the scientist Alfred Wegener. In the early 20th century, Wegener published a paper explaining his theory that the continental landmasses were “drifting” across the Earth, sometimes plowing through oceans and into each other. He called this movement continental drift. 

Answer:

The point will travel a distance of 15708 centimeters in 30 seconds of rotation.

Explanation:

In this case, we see a disk rotating at constant rate, the travelled distance of a point on the outside rim ([tex]s[/tex]), in centimeters, is determined by using this expression:

[tex]s = \omega \cdot r\cdot t[/tex] (1)

Where:

[tex]\omega[/tex] - Angular speed, in radians per second.

[tex]r[/tex] - Radius of the disk, in centimeters.

[tex]t[/tex] - Time, in seconds.

If we know that [tex]\omega \approx 10.472\,\frac{rad}{s}[/tex], [tex]r = 50\,cm[/tex] and [tex]t = 30\,s[/tex], then the travelled distance of the point is:

[tex]s = \omega \cdot r\cdot t[/tex]

[tex]s = 15708\,cm[/tex]

The point will travel a distance of 15708 centimeters in 30 seconds of rotation.

Answer:

7

Explanation:

The light travels a total of 4 cm to the screen, of that, 3 cm is in air and 1 cm is in the glass plate.

The total number of wavelengths of light between the source and screen is just the number of wavelengths in air plus the number in the glass.

To determine the number of wavelengths in air, divide the thickness of air (3 cm) by the wavelength of the light (6000 Angstroms), converting units as needed.

The refractive index of the glass is 1.5. That means that the velocity of propagation of the light in the glass is 2/3 of what it is in air, and so the wavelength of the light in glass is 2/3 of what it is in air. So, divide the thickness of glass (1 cm) by the wavelength of the light in glass (6000 * 2/3).

Add the two values for the final answer

Answer:

[tex]\boxed {\boxed {\sf 100,000 \ Joules}}[/tex]

Explanation:

Kinetic energy is energy due to motion. The formula is half the product of mass and velocity squared.

[tex]E_k= \frac{1}{2} mv^2[/tex]

The mass of the roller coaster car is 2000 kilograms and the car is moving 10 meters per second.

Substitute these values into the formula.

[tex]E_k= \frac{1}{2} (2000 \ kg ) \times (10 \ m/s)^2[/tex]

Solve the exponent.

[tex]E_k= \frac{1}{2} (2000 \ kg ) \times (100 \ m^2/s^2)[/tex]

Multiply the first two numbers together.

[tex]E_k= 1000 \ kg \times (100 \ m^2/s^2)[/tex]

Multiply again.

[tex]E_k= 100,000 \ kg*m^2/s^2[/tex]

[tex]E_k= 100,000 \ J[/tex]

The roller coaster car has 100,000 Joules of kinetic energy.

Answer:

Explanation:

Do you mean the solvent? If this is off the mark, let me know in a comment.

The solvent is something that the solute is (usually) soluble in.

Answer:

hydrogen and helium

Explanation:

i got it 100 percent. Hope this Helps!

Answer:

The correct response will be "13.755 kN".

Explanation:

According to the question,

The given values are:

a = 300 mm

i.e.,

  = 0.3 cm

b = 200 mm

i.e.,

  = 0.2 dm

Internal pressure,

[tex]P_{in}=100[/tex]

Now,

The area of the elliptical shape window will be:

⇒  [tex]A = \pi ab[/tex]

On substituting the values, we get

⇒      [tex]=3.14\times 0.300\times 0.200[/tex]

⇒      [tex]=0.1885 \ m^2[/tex]

By using the table,

At 10 km, the atmospheric pressure will be

⇒  [tex]p_o=27.03 \ kPa[/tex]

Now,

The outward force will be:

⇒  [tex]F_{net}=p_{in}A-p_{0}A[/tex]

⇒          [tex]=(p_{in}-p_{0})A[/tex]

⇒          [tex]=(100-27.03)\times (0.1885)[/tex]

⇒          [tex]=13.755 \ kN[/tex]

Answer:

0.64 s

Explanation:

It's period of oscillation (T) can be determined by,

T = 2[tex]\pi[/tex][tex]\sqrt{\frac{l}{g} }[/tex]

Where l is the length (extension on the spring), and g the acceleration due to gravity.

But,

l = 10 cm = 0.1 m

g = 9.8 m/[tex]s^{2}[/tex]

Thus,

T = 2 x [tex]\frac{22}{7}[/tex] [tex]\sqrt{\frac{0.1}{9.8} }[/tex]

  = 0.6350

T = 0.64 s

The period of oscillation would be 0.64 s.

Answer:

0.5

Explanation:

In this picture,

Answer:

6.15 s

Explanation:

From the question,

Applying the law of conservation of momentum

Momentum of the Heavier skater = Momentum of the lighter skater.

Mv = mV................. Equation 1

Where M = mass of the heavier skater, m = mass of the lighter skater, v = Velocity of heavier skater, V = velocity of the lighter skater.

But,

v = r/t........................ Equation 2

V = r/t'................ Equation 3

Where r = radius of the circular rink, t = time taken for the heavier skater to reach the edge, t' = time taken for the lighter skater to reach the edge.

Substitute equation 2 and equation 3 into equation 1

M(r/t) = m(r/t')............. Equation 4

Given: M = 65 kg, m = 40 kg, r = 50/2 = 25 m, t = 10 s.

Substitute into equation 4 and solve for t'

65(25/10) = 40(25/t')

162.5 = 1000/t'

t' = 1000/162.5

t' = 6.15 seconds

Answer:

50N

Explanation:

force it is falling with can be found by mass into acceleration and then devide by half to find force that could stop it in 2 sec

When charged objects touch, you can assume that the charges move between the objects, so that the total amount of charge doesn't change but it splits equally between the two objects.

-- like two water tanks standing next to each other, with a different amount of water in each one.  When you connect a pipe between their bottoms, some water flows across until the LEVEL of water is the same in both tanks.

-- like one hard full balloon and one soft mooshy balloon.  When you connect them together, some air flows from the hard balloon into the soft balloon, until the pressure of air is the same in both balloons.  

The total amount of charge on your two objects is (+6.0 μC  -  2.0 μC).  That's +4.0 μC  .

When they touch, charges move around until the charge is the same on both objects . . . +2 μC.

Answer:

The power generated by the woman is 259 W

Explanation:

Given;

mass of the woman, m = 45.7 kg

initial velocity of the woman, u = 0

total height ascended by the woman, h = 2.54 m

time of the woman's motion, t = 5.0 s

final velocity of the woman, v = 2.63 m/s

acceleration due to gravity, g =  9.8 m/s²

The potential energy of the woman due to the height she ascended;

P.E = mgh

P.E = 45.7 x 9.8 x 2.54

P.E = 1137.564 J

The kinetic energy of the woman due to her final velocity;

K.E = ¹/₂mv²

K.E = ¹/₂ x 45.7 x (2.63)²

K.E = 158.051 J

The total mechanical energy of the woman at the top of the stairs;

M.E = P.E + K.E

M.E = 1137.564 J  +  158.051 J

M.E = 1295.615 J

The power generated by the woman;

Power = Energy/time

Power = 1295.615 J / 5 s

Power = 259.123 W

Power = 259 W

Answer:

speed=distance/time

Explanation:

its distance over time like division

Answer:

Explanation:

My name is Jeff

Answer:

Both are electromagnetic waves

Explanation:

Hope this helped!!

Answer:

[tex]1.302\ \text{kg/s}[/tex]

Explanation:

[tex]\rho[/tex] = Density of water = [tex]1\ \text{kg/L}[/tex]

[tex]dV[/tex] = Change in volume = [tex]220\times 0.355\ \text{L}[/tex]

[tex]dt[/tex] = Time elapsed = 1 minute = 60 seconds

Mass flow rate is given by

[tex]\dot{m}=\rho\dfrac{dV}{dt}\\ =1\times \dfrac{220\times 0.355}{60}\\ =1.302\ \text{kg/s}[/tex]

The mass flow rate is [tex]1.302\ \text{kg/s}[/tex].

Answer:

13.1

Explanation:

thats what i put in for acellus and its right

Answer:

so you have a question

Explanation:

either way,you have a nice day

Answer:

The kinetic energy at ground will be "238.2 J".

Explanation:

The given values are:

mass,

m = 3 kg

Initial height,

h = 3 m

Initial velocity,

v = 10 m/s

By using the conservation of energy at points A and B,

⇒  [tex]E_A=E_B[/tex]

⇒  [tex]mgh+\frac{1}{2}mv^2=k_B[/tex]

On substituting the values, we get

⇒  [tex]3\times 9.8\times 3+\frac{1}{2}\times 3\times (10)^2=k_B[/tex]

⇒             [tex]88.2+0.5\times 3\times 100=k_B[/tex]

⇒                            [tex]88.2+150=k_B[/tex]

⇒                                    [tex]238.2 =k_B[/tex]

Explanation:

Given that,

Mass, m = 1.8 kg

Compression, x = 2.6 cm

We know that,

Force on spring = weight

So,

[tex]mg=kx[/tex]

Where

k is spring constant

[tex]k=\dfrac{mg}{x}\\\\k=\dfrac{1.8\times 9.8}{2.6\times 10^{-2}}\\\\k=678.46\ N/m[/tex]

(2) If m = 5.2 kg

[tex]x=\dfrac{mg}{k}\\\\x=\dfrac{1.8\times 9.8}{678.46}\\\\x=2.6 \ cm[/tex]

Hence, this is the required solution.

Answer: A cloud of stellar dust from part of a Nebula collapsed causing hydrogen atoms to fuse together

Explanation:

Answer:

11.34 i think

Explanation:

Answer:

a.  0.00189 kg

b. 18.552 mN

c. 1.363 kN

d. Since the molecular density is high, the force exerted by the sample is thus high.

Explanation:

(a) Find the mass of the gas. kg

Using PV = mRT/M where P = pressure on gas = atmospheric pressure = 1.013 × 10⁵ Pa, V = volume of gas = L³ where L = length of cube = 11.6 cm = 0.116 cm,m = mas of gas, R = molar gas constant = 8.314 J/mol-K, T = temperature of gas = 291 K and M = molar mass of gas = 28.9 g/mol

So, m = PVM/RT = PL³M/RT

Substituting the values of the variables into the equation, we have

m = PL³M/RT

= 1.013 × 10⁵ Pa × (0.116)³ × 28.9 g/mol/ 8.314 J/mol-K × 291 K

= 0.0457 × 10⁵ Pa g/mol/2419.374J/mol

= 1.89 × 10⁻⁵ × 10⁵ g

= 1.89 g

= 1.89 × 10⁻³kg

= 0.00189 kg

(b) Find the gravitational force exerted on it. mN

The gravitational force, F exerted on it is its weight W

So, F = W = mg where m = mass of gas = 1.89 × 10⁻³ kg and g = acceleration due to gravity = 9.8 m/s²

F = mg

= 1.89 × 10⁻³ kg × 9.8 m/s²

= 18.522 × 10⁻³ kgm/s²

= 18.552 × 10⁻³ N

= 18.552 mN

(c) Find the force it exerts on each face of the cube. kN

Since pressure, P = F/A where F = force exerted on each face and A = area of each face = L² where L = length of side of cube = 11.6 cm = 0.116 m

So, F = PA since P = atmospheric pressure = 1.013 × 10⁵ Pa,

F = PL²

= 1.013 × 10⁵ Pa (0.116 m)²

= 0.01363 × 10⁵ N

= 1.363 × 10³ N

= 1.363 kN

(d) Why does such a small sample exert such a great force

To answer this question, we need to find the density of the gas in the cube.

So density of gas,ρ = m/V where m = mass of gas = 1.89 g and V = volume of gas = L³ and L = length of side of cube = 11.6 cm

ρ = m/V = m/L³ = 1.89 g/(11.6 cm)³ = 1.89 g/1560.896 cm³ = 0.00121 g/cm³

We now find the number of moles of gas in a cm³ by dividing its density by its molar mass.

So n = ρ/M = 0.00121 g/cm³ ÷ 28.9 g/mol = 23687.67 mol/cm³

Since there are 6.022 × 10²³/mol, we find the number of molecules in a cm³ which is n × 6.022 × 10²³/mol = 23687.67 mol/cm³ × 6.022 × 10²³/mol

= 143731.1 × 10²³ molecules/cm³

= 1.437311 × 10²⁸ molecules/cm³

≅ 1.44 × 10²⁸ molecules/cm³

Since the molecular density is high, the force exerted by the sample is thus high.

Answer:

Increase

As the mass of either object increases, the force of gravitational attraction between them also increases.

Explanation:

The gravitational force is directly proportional to the mass of both interacting objects, more massive objects will attract each other with a greater gravitational force.

As the mass of either object increases, the force of gravitational attraction between them also increases.

Answered by none other than the ONE & ONLY #QUEEN herself aka #DRIPPQUEENMO

HOPE THIS HELPED!!!

Answer:  H

the lights travel through the mirr to create a bigger wider light.

hope this helps (: