a 30.00-ml sample of 0.125 m hcooh is being titrated with 0.175 m naoh. what is the ph after 21.4 ml of naoh has been added? ka of hcooh

When KCl is dissolved in water, the following ions are produced: K+ and Cl-.

The solution of an ionic compound dissolved in water will be broken into ions, with the positive ions separated from the negative ions. The cation, which is positively charged, is usually a metal, while the anion, which is negatively charged, is usually a non-metallic element or a group of atoms. When a solute dissolves in water, it forms an electrolyte, which is a substance that conducts electricity when dissolved in water.

KCl, or potassium chloride, is an ionic compound. It is a white crystalline powder with a salt-like taste that dissolves in water. It is used in food processing as a sodium replacement, in medicine as a potassium supplement, and in industrial chemical synthesis and manufacturing.

The chemical formula of KCl is K+Cl-. Potassium chloride (KCl) consists of K+ ions and Cl- ions. In water, these ions disassociate (separate) to produce K+ ions and Cl- ions. So, when KCl is dissolved in water, the ions K+ and Cl- are formed. The answer is K+ and Cl-.

Learn more about ionic: https://brainly.com/question/2687188

#SPJ11

The volume of the balloon at a temperature of 263 K will be approximately 683.1 mL.

Charles's Law states that the volume of a gas is directly proportional to its absolute temperature at constant pressure.

This means that the volume and temperature of a gas are directly proportional to each other as long as the pressure is constant.

It is expressed as:

V₁/T₁ = V₂/T₂

Where V₁  and T₁ are the initial volume and temperature, V₂ is the final volume, and T₂ is the final temperature.

Given that:

Solving for V₂, we get:

V₂ = V₁T₂ / T₁

V₂ = ( 800 × 263 ) / 308

V₂ = 210400 / 308

V₂ = 683.1 mL

Therefore, the volume is  683.1 mL.

Learn more about Charles's law here: brainly.com/question/12835309

#SPJ1

The number of moles of NaOH used in this titration of a 25.00 ml monoprotic strong acid solution is 0.0007919 moles.

In order to find out the number of moles of NaOH used in a titration, we can use the formula:

moles of NaOH = concentration of NaOH × volume of NaOH used in titration

Given:Volume of monoprotic strong acid solution = 25.00 mL

Concentration of NaOH = 0.09014 M

Volume of NaOH used in titration = 8.781 mL

We can convert mL to L by dividing it by 1000. So,Volume of monoprotic strong acid solution = 25.00 mL = 25.00/1000 L = 0.02500 L

moles of NaOH = concentration of NaOH × volume of NaOH used in titration= 0.09014 M × 8.781/1000 L= 0.0007919 moles of NaOH

Hence, the number of moles of NaOH used in this titration is 0.0007919 moles.

More on titration: https://brainly.com/question/15568269

#SPJ11

The substrate below is primary and will undergo an [tex]SN^2[/tex] reaction when treated with a strong nucleophile. The correct answer is b. primary: will.

Learn more about substitution nucleophilic bimolecular reaction: https://brainly.com/question/30631335

#SPJ11

Answer:

a) Methanoic acid can be prepared from methanol through oxidation using potassium permanganate and sulfuric acid. The reaction proceeds as follows:

CH3OH + 2[O] → HCOOH + H2O

b) Methanal (formaldehyde) can be prepared from methanol through oxidation using potassium dichromate and sulfuric acid. The reaction proceeds as follows:

CH3OH + [O] → CH2O + H2O

c) Butanone can be prepared from 2-butanol through oxidation using Jones reagent (CrO3/H2SO4) or pyridinium chlorochromate. The reaction proceeds as follows:

CH3CH(OH)CH2CH3 + [O] → CH3COCH2CH3 + H2O

d) Pentanal can be prepared from 1-pentanol through oxidation using potassium permanganate and sulfuric acid. The reaction proceeds as follows:

CH3(CH2)3CH2OH + 3[O] → CH3(CH2)3CHO + 3H2O

e) Hexanoic acid can be prepared from 1-hexanol through oxidation using potassium permanganate and sulfuric acid. The reaction proceeds as follows:

CH3(CH2)4CH2OH + 4[O] → CH3(CH2)4COOH + 4H2O

f) Hexanal can be prepared from 1-hexanol through oxidation using pyridinium chlorochromate. The reaction proceeds as follows:

CH3(CH2)4CH2OH + [O] → CH3(CH2)5CHO + H2O

g) Hexan-3-one can be prepared from 3-hexanol through oxidation using Jones reagent (CrO3/H2SO4) or pyridinium chlorochromate. The reaction proceeds as follows:

CH3(CH2)4CH(OH)CH3 + [O] → CH3(CH2)3COCH3 + H2O

(please could you kindly mark my answer as brainliest)

Strong acid: H₂SO₄

Weak acid: H₂SO₃, HCN

Strong base: Sr(OH)₂, LiOH

Weak base: NH₃, H₂S

Acids are chemical compounds that, when dissolved in water, release hydrogen ions (H+). Their sour taste, capacity to make litmus paper red, and propensity to combine with bases to produce salts and water are what distinguish them. Depending on how much an acid dissociates in water, it can be characterised as either a strong or weak acid.

In water, strong acids like sulfuric and hydrochloric acid totally dissociate to create H+ ions and anions. In water, weak acids like acetic acid and carbonic acid only partially dissociate.

Acids play an important role in many chemical reactions and are used in various applications such as food and beverage processing, pharmaceuticals, and cleaning agents.

Learn more about acid here:

https://brainly.com/question/14072179

#SPJ4

Each reaction's Lewis acid and Lewis base are as follows:

AlCl3 is the Lewis acid in the reaction, whereas Cl- is the Lewis base. F- is the Lewis base and BF3 is the Lewis acid in the reaction Cl- + AlCl3 --> AlCl4- BF3 + F- --> BF4-

The Lewis base in this reaction is NH3, and the Lewis acid is H+. NH3 + H+ --> NH4+

Explanation: A Lewis acid acts as an electron pair acceptor in a Lewis acid-base reaction, whereas a Lewis base acts as an electron pair donor. In the initial reaction, Cl- provides AlCl3 with a pair of electrons, which AlCl3 accepts to produce AlCl4-. As a result, AlCl3 is the Lewis acid and Cl- is the Lewis base. In the subsequent response, F- provides two pairs. BF3 takes the electrons and transforms them into BF4-. Hence, the Lewis bases are F- and BF3, respectively. In the third reaction, H+ absorbs a pair of electrons from NH3 and forms NH4+ as a result. As a result, the Lewis bases are NH3 and H+.

learn more about Lewis acid  here:

https://brainly.com/question/15570523

#SPJ4

The gas law that is employed to deflate a football is Boyle's law.

Boyle's law states that for a fixed amount of gas at a constant temperature, the pressure and volume of the gas are inversely proportional to each other. The equation for Boyle's law is:

[tex]P_{1} V_{1} /P_{2} V_{2}[/tex]

Where [tex]P_{1}[/tex] is the initial pressure of the gas, [tex]V_{1}[/tex]  is the initial volume of the gas,[tex]P_{2}[/tex] is the final pressure of the gas, and [tex]V_{2[/tex] is the final volume of the gas. In the case of deflating a football, the pressure of the air inside the football is reduced by letting some of the air out. The volume of the football decreases as the pressure decreases, and this is in accordance with Boyle's law.

Therefore, The Boyle's Law is used to deflate a football. It states that the volume of a gas is inversely proportional to its pressure, when the temperature is constant.

To know more about Boyle's law refer here :

https://brainly.com/question/1696010

#SPJ11

According to the given Information:

The aqueous solution that has the lowest freezing point is 1.0 M C2H5OH (ethanol).

Because it determines the concentration of solute particles in the solution.

Ionic solutes, such as NaCl, dissociate into multiple ions in water, producing a higher concentration of solute particles per unit concentration than molecular solutes, such as ethanol.

This results in a greater degree of freezing point depression for ionic solutes than molecular solutes.

An aqueous solution is one in which water serves as the solvent.

Aqueous solutions are very common in nature and in laboratory settings. Many substances can dissolve in water to form aqueous solutions, including salts, acids, bases, and gases.

Aqueous solutions are important in many fields of science, including chemistry, biology, and environmental science.

To know more about aqueous solution, visit:

https://brainly.com/question/13608038

#SPJ1

Answer: The law was applicable only to calcium. It could not include other elements beyond calcium.  With the discovery of rare gases, it was the ninth element and not the eighth element having similar chemical properties.

Explanation:

YOUR WELCOME

The mass of 1 mole of solute dissolved to make the solution will be 40 g/mol (mass of 1 mole of solute).

To determine the mass of 1 mole of solute, we can use the molar mass of the solute. The formula for molar mass is:
Molar Mass = Mass of Solute ÷ Number of Moles

Let's use this formula to solve the problem:
Mass of Solute = 20 grams
Volume of Solution = 500 mL = 0.5 L
Concentration of Solution = 1 M
Number of Moles of Solute = Concentration × Volume = 1 M × 0.5 L = 0.5 mol

Now, we can use the molar mass formula to calculate the mass of 1 mole of solute:
Molar Mass = Mass of Solute ÷ Number of Moles
Molar Mass = 20 grams ÷ 0.5 mol
Molar Mass = 40 grams/mol

Therefore, the mass of 1 mole of solute is 40 grams.

Learn more about Mass here:

https://brainly.com/question/19694949

#SPJ11

The theoretical yield of the solid product FeCO₃ in the reaction here is 18.18 grams. This is because, FeCl₂ is a limiting agent.

The precipitation reaction occurring between iron (II) chloride, FeCl₂ and potassium carbonate K₂CO₃

The Molecular equation is given below: FeCl₂ + K₂CO₃ → FeCO₃ + 2KCl

The Complete Ionic equation is given below: Fe₂⁺ + 2Cl⁻ + 2K⁺ + CO₃²⁻ → FeCO₃ + 2K⁺ + 2Cl⁻

The Net Ionic equation is given below: Fe²⁺ + CO₃²⁻→ FeCO₃

Molar mass of FeCl₂ = 126.75 g/mol

Molar mass of K₂CO₃ = 138.21 g/mol

n(FeCl₂) = mass/Mr = 20/126.75 = 0.1578 m

n(K₂CO₃) = mass/Mr = 25/138.21 = 0.1808 m

Therefore, FeCl₂ is the limiting agent. The theoretical yield of FeCO₃ can be calculated as follows: FeCl₂ + K₂CO₃ → FeCO₃ + 2KCl

1 mole of FeCl₂ produces 1 mole of FeCO₃

Moles of FeCO₃ produced = 0.1578 mol

FeCO₃ molar mass = 115.86 g/mol

Mass of FeCO₃ produced = 0.1578 mol × 115.86 g/mol = 18.18 g

Thus, the theoretical yield of the solid product FeCO₃ is 18.18 g.

Learn more about Theoretical yield here:

https://brainly.com/question/14966377

#SPJ11

The compound that behaves as an acid when dissolved in water is HI (hydrogen iodide). Thus, the correct option will be D.

HI is an Arrhenius acid, meaning it produces hydrogen ions (H⁺) in aqueous solution. The compound that behaves as an acid when dissolved in the water Hydrogen iodide (HI). HI is a diatomic molecule and a colorless gas at room temperature.

Hydrogen iodide is a strong acid when dissolved in water, with a pKa of −10. Hydrogen iodide is also used as a reducing agent in organic chemistry in the production of iodinated compounds.

Learn more about Acids here:

https://brainly.com/question/29796621

#SPJ11

The pH of the buffer can be calculated using the equation pH=-log[H3O+], which gives pH = -log(2.9x10^-4) = 3.54.

PH is the degree of acidity or alkalinity of a solution, expressed in base 10 as the negative logarithm of the H ion concentration. 

The [H3O+] and pH of a buffer that consists of 0.41 M HNO2 and 0.66 M KNO2 can be calculated using the Ka value of HNO2, which is 7.1x10^-4.

The [H3O+] is equal to the concentration of the acidic component (HNO2) times Ka, so [H3O+]= 0.41 M * 7.1x10^-4 = 2.9x10^-4 M.

The pH of the buffer can be calculated using the equation pH=-log[H3O+], which gives pH = -log(2.9x10^-4) = 3.54.

Learn more about the pH of a buffer: brainly.com/question/22390063

#SPJ11

When scientists first discovered that atoms were composed of smaller particles, such as electrons, protons, and neutrons, they did not reject atomic theory because the experimental evidence supported the idea that atoms were still the fundamental building blocks of matter.

Instead of rejecting atomic theory, scientists modified it to incorporate the new information about the structure of atoms. For example, Ernest Rutherford's famous gold foil experiment in 1911 showed that atoms had a small, positively charged nucleus at their center, which was surrounded by negatively charged electrons.

This discovery led to the development of the modern model of the atom, which is still based on the idea that atoms are the smallest units of matter that retain the properties of an element. However, the model has been updated to reflect our current understanding of the subatomic particles that make up atoms.

To know more about atomic theories, here

brainly.com/question/28853813

#SPJ4

Answer:

2,1,1  

Explanation:

The volume of the ammonia that can be produced from the reaction that has been written is;  155 * 10^7 L

We know that;

PV = nRT

For the hydrogen;

n = PV/RT

n = 155 * 4.0 x 10^7 /0.082 * 776

n = 620 * 10^7/63.63

n = 9.7 * 10^7 moles

Now the reaction equation is;

N₂(g) + 3H₂(g) → 2NH3(g)

3 moles of hydrogen  produced 2 moles of ammonia

9.7 * 10^7 moles will produce  9.7 * 10^7 moles * 2 moles/ 3 moles

x = 6.5 * 10^7 moles

For the volume of the ammonia;

V = nRT/P

V =  6.5 * 10^7 moles * 0.082 * 293.6/1.007

V = 155 * 10^7 L

Learn more about ammonia:https://brainly.com/question/14672082

#SPJ1

To estimate the system pressure and vapor-phase mole fraction when x1 = 0.8, we can use the 1-parameter Margules equation.

This equation assumes that the vapor-liquid equilibrium is a linear relationship between the mole fraction of each component.

Since the given experiment gives us three points, we can use linear interpolation to estimate the parameters of the Margules equation.

From the given experiment, we know the values for x1, y1, and P when x1 = 0.0, 0.2, and 1.0 respectively. Therefore, we can calculate the slope and y-intercept of the Margules equation as follows:

Slope = (P2 - P1)/(y2 - y1) = (68.23 - 41.02)/(0.51 - 0.0) = 68.23

y-intercept = P1 - (slope * y1) = 41.02 - (68.23 * 0.0) = 41.02

Using these values and the x1 value of 0.8, we can then estimate the system pressure and vapor-phase mole fraction as follows:

System Pressure = (slope * 0.8) + y-intercept = (68.23 * 0.8) + 41.02 = 78.2 kPa

Vapor-phase Mole Fraction = (System Pressure - y-intercept) / slope = (78.2 - 41.02) / 68.23 = 0.80

Therefore, the estimated system pressure and vapor-phase mole fraction when x1 = 0.8 is 78.2 kPa and 0.80 respectively.

For more information about Margules equation refer here

https://brainly.com/question/14103505?

#SPJ11

Part A: True.

Part B: False. Rinsing with water may not be enough to clean the buret completely.

Part C: False. Soapy water should not be used to clean a buret since it can leave residue.

Part D: False. After rinsing with water and soapy water solution, the buret should be rinsed with distilled water and dried before adding the titrating solution.

Part E: False. The buret should be rinsed with the titration solution only once before beginning a titration.

Titration is a laboratory procedure used to compare a solution's concentration to that of a reference solution with known concentration. It entails gradually mixing the standard solution into the sample solution up until the reaction is finished, which can be detected by a colour change or another quantifiable signal.

In many disciplines, including chemistry, medicine, and environmental research, titration is used. It can be used to quantify the quantity of a certain component in a sample, examine the concentration of acids and bases, and ascertain the purity of a substance.

Titration calls for exact volume and concentration measurements, as well as safe chemical handling and disposal. There are several different kinds of titration techniques, including complexometric, redox, and acid-base titration.

Learn more about titration here:

https://brainly.com/question/2728613

#SPJ4

The correct answer is B) Urea. Urea is a waste product of protein metabolism, and is released from the body through sweat, where the ammonia and other waste products form urea.

Lysozymes are enzymes that are naturally produced in most living organisms. They are responsible for helping to break down peptidoglycan, a substance found in the cell walls of various bacteria. This helps to prevent bacterial growth and spread, as well as helping to keep the cells intact. Lysozymes are also known to act as an antimicrobial agent, helping to destroy the cell walls of some types of bacteria.

Sebum is an oily substance produced by the sebaceous glands of the skin. The sebaceous gland is located in the hair follicles and it is responsible for secreting the sebum. Sebum production is regulated by hormones and usually occurs when the body needs more moisture (such as during puberty). Sebum can act as a barrier to protect the skin and prevent it from drying out. It helps to keep the skin hydrated, soft and supple. In addition, it helps to reduce bacterial buildup on skin. Sebum is also responsible for giving skin its natural glow.

To know more about Lysozymes, visit:

https://brainly.com/question/29829618

#SPJ1

The average mass of chemistrium (Ch) in amu is: 12.5 amu.

Chemistrium is an element with the atomic number 106. It is a transactinide synthetic element with an atomic weight of 268 u. Until 2009, this element was known as unnilhexium (Unh). It was named chemistrium in honor of the chemistry in recognition of the Moscow-based Joint Institute for Nuclear Research's contributions to the synthesis of new elements.

If a sample of the element chemistrium (Ch) contains 100 atoms of Ch-12 and 10 atoms of Ch-13 (for a total of 110 atoms in the sample), the average mass of chemistrium in amu can be calculated as follows:

Average mass of Ch = [(number of atoms of Ch-12 x atomic weight of Ch-12) + (number of atoms of Ch-13 x atomic weight of Ch-13)] / Total number of atoms of Ch= [(100 x 12.000000) + (10 x 13.003355)] / 110= [1200.0000 + 130.03355] / 110= 1330.03355 / 110= 12.18212318 amu, which is rounded off to 12.5 amu.

Learn more about element: https://brainly.com/question/25608430

#SPJ11

The density of the liquid is 0.562 g/mL, the volume in milliliters is about 1.59 mL, and the mass of 0.285mL sample is about 0.224 grams.

The formula for density is as follows:

Density = mass/volume

Density = 0.155 g/0.000275 L= 562.1 g/L

We know that, 1 L = 1000 mL

So, Density = 562.1 g/L × 1 L/1000 mL= 0.562 g/mL

The density of the given liquid is 0.562 g/mL.

Density = mass/volume

Rearranging the above formula we get,

Volume = mass/density

Density = 3.03 g/mL, Mass = 4.83 g

Volume = 4.83 g/3.03 g/mL= 1.59 mL

Therefore, the volume in milliliters of a 4.83 g sample of a solid with a density of 3.03 g/mL is 1.59 mL.

Mass = density × volume

M = D × V

Density = 0.789 g/mL, Volume = 0.285 mL

Mass = 0.789 g/mL × 0.285 mL= 0.224 g

Therefore, the mass of a 0.285-mL sample of a liquid with density 0.789 g/mL is 0.224 g.

Learn more about Density here:

https://brainly.com/question/29775886

#SPJ11

To neutralize 50.0 mL of 0.80 M NaOH, 200 mL of 0.20 M HCl are needed.

When sodium hydroxide (NaOH) and hydrochloric acid (HCl) are mixed, sodium chloride (NaCl) and water (H2O) are the results. The chemical formula for the neutralizing reaction is as follows:NaOH+HClNaCl+H2O.

We must apply the following balanced chemical equation for the neutralization reaction to calculate how much HCl is needed to neutralize 50.0 mL of 0.80 M NaOH:

HCl + NaOH NaCl + H2O

One mole of HCl interacts with one mole of NaOH to form one mole of NaCl and one mole of water, as shown by the equation.

Let's first determine the quantity of NaOH in moles.

Moles of NaOH = volume (in liters) x molarity

Moles of NaOH = 50.0 mL x (1 L/1000 mL) x 0.80 M

Moles of NaOH = 0.040 moles

moles of HCl = volume (in liters) x molarity

0.040 moles = volume (in liters) x 0.20 M

Volume (in liters) = 0.040 moles / 0.20 M

Volume (in liters) = 0.20 L

Finally, we can convert the volume from liters to milliliters:

Volume (in milliliters) = 0.20 L x (1000 mL/1 L)

Volume (in milliliters) = 200 mL

To know more about NaOH visit:-

https://brainly.com/question/29854404

#SPJ1

Yes, this is a good idea as it is an efficient use of resources. Advantages include reduced costs of purchasing new drying agents and decreased wastage of materials. Disadvantages could include loss of quality of the recycled drying agent, and extra energy used to dry out the salt.

Drying agents can be collected after an experiment and the hydrated salt heated in an oven to drive off the water. The recycled drying agent can then be used again for another experiment.

What are drying agents?

In order to absorb water vapor, drying agents are added to organic solvents to make them anhydrous.

What are the advantages and disadvantages of recycling drying agents?

The recycling of drying agents has a few advantages and disadvantages:

Advantages of recycling drying agents:

Cost-effective: If the solvent used is expensive, recycling drying agents can save money. A drying agent like anhydrous magnesium sulfate is a good example since it can be reused numerous times. No pollution: The disposal of waste is reduced. If every time a new drying agent is employed, it must be disposed of properly, which is both time-consuming and costly. The amount of waste that has to be disposed of is reduced if the same drying agent is used repeatedly. Recyclable waste: Used drying agents are recyclable. It's just a matter of heating the salt to remove any water and returning it to the drying agent stock. This procedure helps to prevent waste.

Disadvantages of recycling drying agents:

Contamination: Even though the recycled drying agent is supposed to be pure, it may still contain minor quantities of impurities, which might result in contamination of the final product. Impurities: If the drying agent is not cleaned properly, impurities will be transferred from one experiment to the next. Excessive heating: Anhydrous drying agents should not be heated excessively because they may lose their effectiveness. If the salt is heated for too long, the surface area exposed to moisture will be decreased. Therefore, while recycling drying agents is a good idea, some precautions should be taken to ensure that the drying agent is pure and effective.

For more details follow the link: https://brainly.com/question/30712002

#SPJ11

A sense strand is the mRNA strand that is translated from a DNA strand with a same nucleotide sequence. the codons have specific functions when the mRNA sequence is translated into a protein.

The DNA sequence serves as a template for the synthesis of a complementary mRNA molecule during transcription. The nucleotide arrangement of the DNA template strand dictates the sequencing of the mRNA. The mRNA sequence is not identical to the template DNA strand; rather, it is complementary to it. RNA polymerase, which builds the mRNA molecule on the DNA template strand, adds complementary RNA nucleotides to the lengthening mRNA chain. Since RNA nucleotides have uracil (U) as a base instead of thymine (T), the mRNA sequence will have the same nucleotide sequence as the DNA template strand. The mRNA sequence is read in groups of three nucleotides called codons, and the codons have specific functions when the mRNA sequence is translated into a protein.

learn more about nucleotide here:

https://brainly.com/question/16308848

#SPJ4

Answer:

oxygen friend

Explanation:

It is generally believed that the Earth's atmosphere did not contain oxygen until around 2500 million years ago (Mya) when oxygen-evolving photosynthetic bacteria arose. At around 800–500 Mya, the oxygen concentration increased sharply to reach the 21% we have today. So, it seems highly likely that life arose as anaerobic organisms, which then evolved to tolerate oxygen and finally, to use it as a terminal acceptor for the energy-producing oxidative processes in the respiration of aerobic bacteria and mitochondria in eukaryotic cells. The respiratory processes employed by typical aerobic organisms today have a wide range of mechanisms to deal with the troublesome side effects of living with a high oxygen concentration.

The reaction in which two compounds exchange their ions to form two new compounds is called decomposition reaction. Option (a) is correct.

Decomposition reaction is defined as a reaction in which a compound breaks down into two or more simpler substances. The general form of the decomposition reaction can be written as,

            AB → A+B.

This type of reaction require an input of energy in the form of heat, light, or electricity. It occurs when one reactant breaks down into two or more products. Some examples of decomposition reactions involves the breakdown of hydrogen peroxide to water and oxygen and the breakdown of water to hydrogen and oxygen. This is called the the process or effect of simplifying a single chemical entity into two or more fragments. This reaction is usually regarded and defined as the exact opposite of chemical synthesis .

To learn more about Decomposition reaction

https://brainly.com/question/16728382

#SPJ4

Answer: I think its 111.6

Explanation:

The change that is useful for the environment and living things is called "positive environmental change."

Positive environmental change refers to any alteration or modification in the environment that improves or benefits living organisms' well-being. Examples of positive environmental changes include reducing pollution, conserving water, using renewable energy sources, and recycling waste products. Positive environmental change is essential to ensure a sustainable future and to maintain the planet's biodiversity.

It can be achieved by implementing new policies, practices, and technologies that promote sustainable development and reduce the negative impact on the environment. Positive environmental change can also help to address climate change and other environmental challenges faced by humanity. By taking positive steps to protect the environment, we can ensure that future generations can also enjoy a healthy, prosperous, and sustainable planet.

To learn more about positive environmental change, here

https://brainly.com/question/30033700
#SPJ4