Answer:
89.1 N
Explanation:
W = m gm = 55.0 x 1.62 = 89.1 N
help i dont wanna read
Answer:
I do not really no sorry
Explanation:
:))
Identify the element that matches this orbital diagram
Answer:
Nitrogen
Explanation:
The electron configuration of nitrogen is:
1s2 2s2 2p3
which satisfies the diagram.
help meeeeeeeeeeeeee
Answer:
XCl₂ + 2AgNO₃ —> X(NO₃)₂ + 2AgCl
The coefficients are: 1, 2, 1, 2
Explanation:
XCl₂ + AgNO₃ —> X(NO₃)₂ + AgCl
The equation can be balance as follow:
XCl₂ + AgNO₃ —> X(NO₃)₂ + AgCl
There are 2 atoms of Cl on the left side and 1 atom on the right side. It can be balance by writing 2 before AgCl as shown below:
XCl₂ + AgNO₃ —> X(NO₃)₂ + 2AgCl
There are 2 atoms of Ag on the right side and 1 atom on the left side. It can be balance by writing 2 before AgNO₃ as shown below:
XCl₂ + 2AgNO₃ —> X(NO₃)₂ + 2AgCl
Now, the equation is balanced.
The coefficients are: 1, 2, 1, 2
Describe the relationship between the potential difference across the resistor and
the current through the resistor.
Ohm's Law states that for a linear circuit the current flowing through it is proportional to the potential difference across it so the greater the potential difference across any two points the bigger will be the current flowing through it.
(I'm happy)
A forecaster studying the climate of an area would find which of the following most helpful?
A. average yearly precipitation
B. today's barometric pressure
C. temperature changes in one month
D. how often natural disasters occur
A forecaster studying the climate of an area would find average yearly precipitation most helpful.
What is forecaster studying of climate?Forecaster studying of climate tells about the changes which will occur in the atmosphere in the upcoming future time.
Forecasting is done by measuring various environmental factors for the prediction of atmosphere. As it will given information about the percent of rainfall in the upcoming days, amount of precipitation, snowfall and so on.
Hence, option (A) is correct.
To know more about Forecaster studying of climate, visit the below link:
https://brainly.com/question/13407372
1. A wave has a frequency of 800 Hz and a wavelength of 2000 cm. What speed
is this wave traveling?
Answer:
V=f*(wavelength)
V= (800)(20m)
16000m/s
Explanation:
Which of the following items are factors that influence reaction rates? Select all that apply.
Question 2 options:
Surface Area
Concentration
Temperature
Catalyst
Light
Answer:
temperature
catalyst
surface area
Directions: Show all of your work for each of the following problems.
3. What is the % Ba in Ba(NO3)2?
4. What is the % of each element in Ni3(PO4)2?
5. What is the % of each element in Al2(CrO4)3?
6. What is the % of each element in (NH4)2(SO4)?
Answer:
3.Ba=24.Ni=2...PO4=35.Al=3...CrO4=26.NH4=1...SO4=2What is the mass of water released by the heating? Show your work or explain your reasoning.
Answer:
Dividing the mass of the water lost by the original mass of hydrate used is equal to the fraction of water in the compound. Multiplying this fraction by 100 gives the percent water in the hydrate.
Explanation:
The amount of water throughout the compound has been determined by dividing the mass of water wasted mostly by original quantity of hydrate used. The above fraction can be multiplied by 100 to get the hydrate's water content in percentages.
What is mass ?The proportion of matter that makes up an object is quantified by its mass. The kilogram, or kg, would be the fundamental SI unit of mass.
What is hydrate?Any substance that contains water through the form of H2O molecules is referred to as a hydrate. This water content by weight can vary, but it is typically fixed. The most well-known hydrates seem to be crystalline solids which decompose once the attached water is removed.
Therefore , The amount of water throughout the compound has been determined by dividing the mass of water wasted mostly by original quantity of hydrate used. The above fraction can be multiplied by 100 to get the hydrate's water content in percentages.
To know more about mass and hydrate.
https://brainly.com/question/11202174
#SPJ3
A girl is pushing on an object with a force of 25 N. A boy is pushing on the same object but from the other direction with a force of 35 N. What is the net force acting on the object?
Answer:
Since the force applied at both ends is acting in opposite directions, then the resultant force becomes negative.
= 35 - 25 = 10
How do mountains affect the climate of a region?
(Giving brainlist for a summary and correct answer)
Answer:
Mountains can have a significant effect on rainfall. When air reaches the mountains, it is forced to rise over this barrier. As the air moves up the windward side of a mountain, it cools, and the volume decreases. As a result, humidity increases and orographic clouds and precipitation can develop
Answer:
Mountains effect them with contact
Explanation:
They are always pushing eachother and crash
The Earth's early atmosphere consisted of what
How many grams of sodium metal must be introduced to water to produce 3.3 grams of hydrogen gas?
Answer:
The mass of sodium metal that must be introduced to water to produce 3.3 grams of hydrogen gas, H₂, is approximately 18.82 grams of sodium metal
Explanation:
The given mass of hydrogen gas produced = 3.3 grams
The molar mass of hydrogen gas, H₂ = 2.016 g/mol
The number of moles of hydrogen gas in 3.3 grams of H₂, 'n', is given as follows;
n = Mass/(Molar mass)
n = 3.3 g/(2.016 g/mol) = 1.63690476 moles of H₂
The reaction of sodium and water can be written as follows;
2Na + 2H₂O → 2NaOH + H₂ (g)
2 moles of sodium produces 1 mole of hydrogen gas, H₂
Therefore;
1.63690476/2 moles of sodium will produce 1.63690476 moles of hydrogen gas, H₂
The molar mass of sodium, Na ≈ 22.989 g/mol
The mass of 1.63690476/2 moles of sodium, 'm', is given as follows;
m = 1.63690476/2 moles × 22.989 g/mol ≈ 18.8154018 grams ≈ 18.82 grams
The mass of sodium that will produce 3.3 grams of hydrogen, m ≈ 18.82 grams of sodium metal.
Which of the following identifies the models that represent an ion and an isotope of the original atom?
A)Model 1 is an ion; Model 3 is an isotope
B)Model 2 is an isotope; Model 3 is an ion
C)Model 1 is an ion; Model 2 is an isotope
D)Model 1 is an isotope; Model 2 is an ion
Model 1 is an ion; Model 3 is an isotope identifies the models that represent an ion and an isotope of the original atom. Therefore, option A is correct.
What are isotope ?Isotopes are atoms that have the same number of protons but different numbers of neutrons. They have nearly identical chemical properties but differ in mass and thus in physical properties.
Neutrons exist to stabilize the nucleus without them, the nucleus would be nothing more than a cluster of positively charged protons. There are different isotopes because there are different ways of stabilizing the protons.
Model 1 is an ion and Model 3 is an isotope identifies the models that represent an ion and an isotope of the original atom. The image of the model is attached below:
Thus, option A is correct.
To learn more about the model, follow the link;
https://brainly.com/question/12955625
#SPJ2
what will happen if fossil fuels don't exist??
Answer:
When fossil fuels are no longer available—especially if it happens abruptly, which it potentially will—we're going to see patients dying in hospitals and healthcare facilities due to electricity failure, and this will be particularly acute during natural disasters.”
Answer:
we wouldn't have cars
Explanation:
Identifying Cell Structures
Which structures are found in plant colls, but not in animal cells? Check all that apply
)
coll wall
coll membrane
chloroplasts
O lysosomes
ribosomes
vacuoles
Answer:
cell wall and chloroplasts
Explanation:
Help ASAP If you know what to do comment if u don’t I’ll report you ! Points added
Proton:
Positive
Found in Nucleus
Mass of 1 AMU
Neutron:
Neutral
Found in Nucleus
Mass of 1 AMU
Electron:
Negative
Found in orbitals
Mass of 0 AMU
How many grams of 5% barium hydroxide solution will be needed to react 2 moles of sulfur (IV) oxide?
Answer:
DONT PRESS THAT LINK IT IS VIRUS AND HACK
Explanation:
What would happen if you mixed Zinc and Sulfur thoroughly,and you put a hot metal rod to it?
Answer:
A violent reaction will occur and zinc sulphide is formed as a product
DUE IN ONE MINUET HELP TwT
How many moles of NaOH would produce 10 moles of water in this reaction?
2NaOH + H2SO4 → Na2SO4 + 2H20
O A. 10
O B. 1
O C. 4
O D. 20
a wave transfers from one place to another
Answer:
mhm
Explanation:
When cobalt(II) chloride is allowed to react with sodium hydroxide, the resulting
products are cobalt(II) hydroxide and sodium chloride. Determine the mass of
cobalt(II) chloride required to completely react with 114g of sodium hydroxide.
Answer:
Reaction CoCl2 + 2 NaOH -> Co(OH)2 + 2 NaOH
You need to count number of moles of NaOH
Amount of mole is n = m/M = 114 g / 39.998 g/mol = 28,5 mol (about)
Amount of CoCl2 is half from that
Calculate molar mass of CoCl2 and multiply it by 28,5 mol
Explanation:
15. _____ is the breakdown of rocks into smaller particles by natural processes.
A. Deposition
B. Weathering
C. Erosion
Answer:
B
Explanation:
Weathering is the physical and chemical breakdown of rock at the earth's surface. ... The physical breakdown of rock involves breaking rock down into smaller pieces through mechanical weathering processes. These processes include abrasion, frost wedging, pressure release (unloading), and organic activity.
Calculate the amount of copper obtained by this reaction
Someone help please ...
Answer:
Yes
Explanation:
How many moles are present in 29.4g of Aluminum (AI)? *
Answer:
588 mole
29.4
+29.4
5 8. 8g
1. How many liters of a 0.50 M solution are needed to give 3.5 moles of solute?
Answer:
The volume of solution in liters required to make a 0.250 M solution from 3.52 moles of solute is 14.08 liters of solution
Explanation:
The question relates to the definition of the concentration of a solution which is the number of moles per liter (1 liter = 1 dm³) of solution
Therefore we have;
The concentration of the intended solution = 0.250 M
Therefore, the number of moles per liter of the required resolution = 0.250 moles
Therefore, the concentration of the required solution = 0.250 moles/liter
The volume in liters of the required solution that will have 3.52 moles of the solute is given as follows;
The required volume of solution = The number of moles of the solute/(The concentration of the solution)
∴ The required volume of solution = 3.52 moles/(0.250 moles/liter) = 14.08 liters
The required volume of solution to make a 0.250 M solution from 3.52 moles of solute = 14.08 liters.
Therefore the number of liters required to make a 0.250 M solution from 3.52 moles of solute = 14.08 liters.
How many moles are in 1.2 x 10^24 atoms of Y
Answer: We know that, 1 mole of any substance contain 6.022 X 10^23 atoms/molecules. Thus, 2.14 moles are present in 1.29x10^24 hydrogen atoms in HF.
Explanation:
divide it by avogadro's constant
that is 6.02 × 10²³
1.2 × 10²⁴ / 6.02 × 10²³
= 2 mol
What is concentration of hydrogen ion a given acid if its PH value is 9?
Whats the formula for Nickel (IV) chloride?
The molecular formula for Nickel (IV) Chloride will be NiCl₂. Nickel reacts with chloride to form a salt. The salt is yellow in color and anhydrous.
What is molecular formula?A molecular formula is a way of presentation of chemical formula of a compound. It gives the information related to the type of atoms, number of atoms which constitutes the compound and the chemical properties.
Molecular formula of a chemical compound can be derived by the valency of element. In this question, molecular formula of the compound can be derived by:
Valency of Nickel = 2
Valency of Chlorine = 1
By the cross-multiplication of valency:
element 1(valency of element 2). element 2 (valency of element 1)
= Ni (1). Cl(2)
= NiCl₂
Therefore, the molecular formula of Nickel (IV) chloride will be NiCl₂.
Learn more about molecular formula here:
https://brainly.com/question/14425626
#SPJ2
