Complete question is;
A bicycle and a car start their journey at the same time the cyclist reaches it's top speed of 10m/s in 15 s, the car reaches a speed of 15 m/s in 55 s. which has the greater acceleration the car or the bicycle.
Answer:
The bicycle has the greater acceleration.
Explanation:
Cyclist reaches a top speed of 10m/s in 15 s.
Formula for acceleration here is;
a = v/t
a = 10/15
a = 0.67 m/s²
Car reaches a speed of 15 m/s in 55 s.
Thus;
a = 15/55
a = 0.27 m/s²
From the 2 acceleration values gotten, we can say that;
The bicycle has the greater acceleration.
An object 2cm high is placed 3cm in front of a concave lens of focal length 2cm, find the magnification?
Answer:
0.4
Explanation:
A concave lens is a diverging lens, so it will always have a negative focal length. Image distance is always negative for a concave lens because it forms virtual images.
From the lens formula;
1/f = 1/u+ 1/v
- 1/2 = 1/3 - 1/v
1/v = 1/3 + 1/2
v= 6/5
v= 1.2 cm
Magnification = image distance/object distance
Magnification = 1.2cm/3cm
Magnification = 0.4
Question 23 of 23
Suppose a current flows through a copper wire. Which two things occur?
O A. The field is parallel to the direction of flow of the current.
B. An electric field forms around the wire.
OC. A magnetic field forms around the wire.
U
D. The field is perpendicular to the direction of flow of the current.
SUBM
Answer:
The field is parallel to the direction of flow of the current.
a ball is thrown straight up into the air while the ball is traveleling upwards what are the magnitue and direction
Answer: hi your question is incomplete attached below is the complete question
answer :
magnitude of acceleration : | a | = g = 9.81 m/s^2
direction : a = - g j
Explanation:
Neglecting Air resistance
magnitude of acceleration :
| a | = g = 9.81 m/s^2
Direction of acceleration
a = - g j ( given that the direction of acceleration is against the acceleration due to gravity i.e. in the opposite direction )
Look at the distance-time graph below. It shows Angela's journey as she walks to the end of the road and back. The end of the road is 40 m away. After how many seconds did she arrive back where she started?
Answer:
Explanation:
If the distance to the end of the road was 40 m, and she traveled back to where she started, she traveled a total distance of 80 m. It took her 100 seconds to travel the 80 m.
Based on the given distance-time graph, the number of seconds that Angela used to go to the end of the road and arrive back is 100 seconds.
How long did Angela take?The end of the road is 40m and coming back is also 40 m. The total distance is:
= 40 + 40
= 80m
The graph shows that to walk 80 meters, Angela took a 100 seconds because the line on the graph ends at 80 m and 100 seconds.
Find out more uses of distance-time graphs at https://brainly.com/question/13877898.
#SPJ6
5- Clasifica los siguientes cambios de la materia, anotando delante de cada uno cambio físico (F) o cambio químico (Q): • Disolver azúcar en agua • Freir una chuleta • Arrugar un papel • El proceso de la digestión • Secar la ropa al sol • Congelar una paleta de agua • Hacer un avión de papel • Oxidación del cobre • Romper un lápiz • Prender fuegos artificiales • Excavar un hoyo • Quemar basura
Answer:
1) Disolver azúcar en agua - Cambio químico - Es un caso de una solución en donde el solvente es el azúcar y el soluto es el agua.
2) Freir una chuleta - Cambio físico - Es un proceso de cocinado por un transferencia de calor y transferencia de masa.
3) Arrugar un papel - Cambio físico - Se aplica fuerzas externas para deformar el papel.
4) El proceso de la digestión - Cambio químico - Reducción de los alimentos a desechos y la absorción de nutrientes por el contacto con jugos gástricos o ambientes intestinales.
5) Secar la ropa al sol - Cambio físico - El secado es un fenómeno de transferencia de masa.
6) Congelar una paleta de agua - Cambio físico - Cambio del estado líquido al estado sólido por transferencia de calor.
7) Hacer un avión de papel - Cambio físico - Aplicación de fuerzas externas para plegar y doblar la hoja de papel.
8) Oxidación del cobre - Cambio químico - Proceso de corrosión por contacto con iones que se transportan en el ambiente.
9) Romper un lápiz - Cambio físico - Proceso de ruptura por esfuerzo normal a causa de un momento como consecuencia de una fuerza externa aplicada sobre el lápiz.
10) Prender fuegos artificiales - Cambio químico - Reacción química de reducción-oxidación.
11) Excavar un hoyo - Cambio físico - Remoción de tierra por trabajo físico.
12) Quemar basura - Cambio químico - Reacción de combustión.
Explanation:
A continuación, veremos que representa cada caso:
1) Disolver azúcar en agua - Cambio químico - Es un caso de una solución en donde el solvente es el azúcar y el soluto es el agua.
2) Freir una chuleta - Cambio físico - Es un proceso de cocinado por un transferencia de calor y transferencia de masa.
3) Arrugar un papel - Cambio físico - Se aplica fuerzas externas para deformar el papel.
4) El proceso de la digestión - Cambio químico - Reducción de los alimentos a desechos y la absorción de nutrientes por el contacto con jugos gástricos o ambientes intestinales.
5) Secar la ropa al sol - Cambio físico - El secado es un fenómeno de transferencia de masa.
6) Congelar una paleta de agua - Cambio físico - Cambio del estado líquido al estado sólido por transferencia de calor.
7) Hacer un avión de papel - Cambio físico - Aplicación de fuerzas externas para plegar y doblar la hoja de papel.
8) Oxidación del cobre - Cambio químico - Proceso de corrosión por contacto con iones que se transportan en el ambiente.
9) Romper un lápiz - Cambio físico - Proceso de ruptura por esfuerzo normal a causa de un momento como consecuencia de una fuerza externa aplicada sobre el lápiz.
10) Prender fuegos artificiales - Cambio químico - Reacción química de reducción-oxidación.
11) Excavar un hoyo - Cambio físico - Remoción de tierra por trabajo físico.
12) Quemar basura - Cambio químico - Reacción de combustión.
1) Convert the following:
I) 65 kg into g
ii) 87570 seconds into hour
iii) 7.5 km into m
Answer:
65000g
24.325 hrs
7500m
Answer:
I) 65000 g II)24.325 hours III)7500 m
Explanation:
I) 1 kg = 1000 g
65 kg = 65 * 1000 g = 65000 g
II) 1 hour = 3600 seconds
1 second = 1/3600 hours
87570 seconds = 87570 * 1/3600 hours =24.325 hours
III) 1 km = 1000 m
7.5 km = 7.5 * 1000 m = 7500 m
Match the synthetic materials with the processes used to make them.
Please answer will mark brainleist
[tex]option \: (a) \: is \: correct.[/tex]
Explanation:
Yes, I was wrong. Pressure increases as the area decreases.
As per the Figure A, the truck is so heavy and having a greater mass. So, the area of contact between the tyres and the road increases and decreases it's pressure on the road due to the increase in area.
As per the Figure B, You know the nature of Tomato that it is soft and smooth to touch and also lighter mass when it's compared with the truck. As it having a lighter mass, it can be cut through the sharp knife. The area of contact decreases and pressure increases on the vegetables.
Answer:
Option number B
Explanation:
The pressure is indirectly proportional to the area therefore pressure decreases when the area increases, and pressure increases when the area decreases
The electric motor in the car is powered by a battery.
To charge the battery, the car is plugged into the mains supply at 230 V
The power used to charge the battery is 6.9 kW
Calculate the current used to charge the battery.
Answer:
I = 30 A.
Explanation:
Given that,
The voltage of the battery, V = 230 V
Power used to charge the battery, P = 6.9 kW
We need to find the current used to charge the battery. The formula for the power is given by :
P = VI
Where
I is current
So,
So, the required current is 30 A.
[tex]what \: is \: mirror \: {?}[/tex]
what force to be required to accelerate a car of mass 120 kg from 5 m/s to 25m/s in 2s
Answer:
[tex]f = m \frac{v1 - v2}{t} \\ = 120 \times \frac{25 - 5}{2} \\ = 120 \times \frac{20}{2} \\ = 120 \times 10 \\ = 1200N \\ thank \: you[/tex]
When the E string of a guitar (frequency 330 Hz) is plucked, the sound intensity decreases by a factor of 2 after 4 s. Determine
Answer:
[tex]Q=50.3[/tex]
Explanation:
From the question we are told that:
Frequency [tex]F=330Hz[/tex]
Sound intensity drop [tex]I_d=2[/tex]
Time [tex]T=4s[/tex]
Therefore
Sound intensity Ratio
[tex]\frac{I}{I_x}=\frac{1}{2}[/tex]
Generally the equation for Sound intensity is mathematically given by
[tex]\frac{I}{I_x}=e^{-4\ \=t}[/tex]
[tex]\frac{1}{2}=e^{-4\ \=t}[/tex]
[tex]\=t =5.8s[/tex]
Generally the equation for Quality Factor is mathematically given by
[tex]Q=2 \pi\frac{E}{\triangle E}[/tex]
[tex]Q=2 \pi\frac{E}{\frac{E}{2*4}}[/tex]
[tex]Q=50.3[/tex]
rainfall occurs on the earth due to effect of gravity
Answer:
TrueBecause Gravity is the force of attraction between two objects, and Earth's gravity pulls matter downward, toward its center. It pulls precipitation down from clouds and pulls water downhill. Gravity also moves air and ocean water. ... Gravity pulls denser air and water downward, forcing less dense air and water to move upward.Carryonlearning
Answer all these questions
What type of waves can only travel through a medium?
What is pitch?
What is the relationship between amplitude and volume?
How does the type of medium affect a sound wave?
Describe the relationship between frequency and wavelength.
Answer:
mechanical waves,
.
the quality of a sound governed by the rate of vibrations producing it; the degree of highness or lowness of a tone.
.
If the amplitude increases the volume increases and vice versa.
.
The type of medium affects a sound wave as sound travels with the help of the vibration in particles.
.
The higher the frequency, the shorter the wavelength.
Explanation:
Answer:
1 . Soundwave
2. pitch are sounds that are high or low corresponding and according to a certain frequency measured in Hertz
3. volume is the increase in sound or decrease in sound how loud or soft something is while amplitude is strength of sound
4. frequency is measured in Hertz one wave per second and wavelength is distance between corresponding points of two recurring and consecutive sound waves
In a science museum, a 130 kg brass pendulum bob swings at the end of a 14.4 m -long wire. The pendulum is started at exactly 8:00 a.m. every morning by pulling it 1.7 m to the side and releasing it. Because of its compact shape and smooth surface, the pendulum's damping constant is only 0.010kg/s. You may want to review (Pages 405 - 407) . Part A At exactly 12:00 noon, how many oscillations will the pendulum have completed
Answer:
The time in which the pendulum does a complete revolution is called the period of the pendulum.
Remember that the period of a pendulum is written as:
T = 2*pi*√(L/g)
where:
L = length of the pendulum
pi = 3.14
g = 9.8 m/s^2
Here we know that L = 14.4m
Then the period of the pendulum will be:
T = 2*3.14*√(14.4m/9.8m/s^2) = 7.61s
So one complete oscillation takes 7.61 seconds.
We know that the pendulum starts moving at 8:00 am
We want to know 12:00 noon, which is four hours after the pendulum starts moving.
So, we want to know how many complete oscillations happen in a timelapse of 4 hours.
Each oscillation takes 7.61 seconds.
The total number of oscillations will be the quotient between the total time (4 hours) and the period.
First we need to write both of these in the same units, we know that 1 hour = 3600 seconds
then:
4 hours = 4*(3600 seconds) = 14,400 s
The total number of oscillations in that time frame is:
N = 14,400s/7.61s = 1,892.25
Rounding to the next whole number, we have:
N = 1,892
The pendulum does 1,892 oscillations between 8:00 am and 12:00 noon.
You are accelerating upwards in an elevator when the net force on you increases. What happens to the acceleration
Answer:
the acceleration of the elevator is increasing
Explanation:
For this exercise we propose the solution using Newton's second law
F -W = m a
F = m (g + a)
If the net force increases, it implies that the acceleration of the elevator is increasing, since the acceleration of gravity is constant as the ascent is accelerating.
a cyclist has a combined mass of 88 kg and a combined weight of 862.4 then accelerates at 1.2m/s after 2 seconds he reaches a of 2.4m/s what is his momentum at this point
Answer:
shushhhgggvvv vgfxgh
Explanation:
gey laahhg
When the spacecraft is at the halfway point, how does the strength of the gravitional force on the spaceprobe by Earth compre with the strength
Solution :
When the spacecraft is at halfway point, the distance from the Earth as well as Mars are same. We have to account the masses of the planets. The gravitational force that is exerted by the Earth is greater because of its combined mass with the space probe.
The mass of Earth is greater than the mass of Mars. Therefore, the force of Earth is more than Mars.
A wave travels at 330m/s^-1. the wavelength is found to be 2.4m.
Calculate the period of oscillation of a article in the medium transmitting the waves.
The frequency of oscillations of the source transmitting the wave
Answer: frequency 137.5
Time period 0.01sec
Explanation:
The boiling point of a substance is _72 degree Celsius. This temperature will be equivalent to Kelvin scale is-------.
Answer:
345 K
Explanation:
Temperature can be defined as a measure of the degree of coldness or hotness of a physical object.
Generally, it is measured with a thermometer and its units are Celsius (°C), Kelvin (K) and Fahrenheit (°F).
Given the following data;
Boiling point = 72°CTo convert the temperature in degree Celsius to Kelvin, we would use the following mathematical expression;
Kelvin = 273 + °C
Substituting into the formula, we have;
Kelvin = 273 + 72
Kelvin = 345 K
Therefore, the temperature of 72°C will be equivalent to 345 K on the Kelvin scale.
A box has a mass of 4kg and surface area 4m². Calculate the
pressure exerted by the box on the floor.
Answer:
10 pa
Explanation:
4kg* 10 (or 9.8m/s2) = 40
40N /4m2 =10
a body is moving along a circular path 'r'. what will be the distance and displacement of the body when it completed half a revolution?
After half of a revolution ...
==> Distance = π•r
==> Displacement = 2•r
Calculate surface tension of an enlarged radius of 4cm to 6cm and amount of work necessary for enlargement was 1.5×10^-4 joules
Answer:
[tex]T=7.5*10^{-5}[/tex]
Explanation:
From the question we are told that:
Radius [tex]r=2cm[/tex]
Work done [tex]W=1.5×10^-4 joules[/tex]
Generally the equation for Work done is mathematically given by
[tex]W=T.dA[/tex]
Therefore
[tex]T=\frac{W}{dr}[/tex]
[tex]T=\frac{1.5*10^{-4}}{2}[/tex]
[tex]T=7.5*10^{-5}[/tex]
Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions.
Which is the best analysis of Eli’s statement?
The question is incomplete, the complete question is;
Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions. Which is the best analysis of Eli’s statement? It is correct because each ion is a pure substance, so sodium phosphate is made up of two pure substances. It is correct because the composition of sodium phosphate changes depending on the sample. It is incorrect because sodium phosphate is a compound that has a single composition. It is incorrect because the two types of ions in sodium phosphate cannot be seen.
Answer:
It is incorrect because sodium phosphate is a compound that has a single composition
Explanation:
A compound is a neutral substance made up of two or more atoms which are chemically combined together.
Ionic substances are made up of ions. These ions are not separate entities, they are part of the compound.
Hence, Eli's statement is incorrect because sodium phosphate is a compound that has a single composition.
When extrication will involve cutting the roof off a vehicle, stabilization of the vehicle should include:
Answer:
Deflating the tires by pulling the valve stems
Explanation:
When an accident happens, the EMT process is to take off the top of the vehicle of the highly damaged vehicle so that it can easily be assessed to rescue the vehicle occupants. This creates a bigger exit for the rescuers to take out the people. Vehicle extrication means removing the vehicle from around someone involved in a fatal collision, when other other ways of exiting is not advised or possible. to stabilize the vehicle you have to deflate all tires by pulling the valve stems.
The force that the left team pulls with is 1000 N. If the right team's total mass is 300 kg and they accelerate by 1.2 m/s2, what is the force of resistance on the right team
Answer:
the force of resistance on the right team is 360 N
Explanation:
Given;
force of the left team, = 1000 N
total mass of the right team, m = 300 kg
acceleration of the right team, a = 1.2 m/s²
The force of resistance of the right team is calculated as;
Force = mass x acceleration
Force, F = 300 x 1.2
Force = 360 N
Therefore, the force of resistance on the right team is 360 N
in a chemical equation, where do the products appear
Answer:
products would appear after the raw materials
Explanation:
raw material + raw material = product (anything deriving from combining two materials)
Use the ideal gas law, PV=nRT to solve. R=0.0821
If I have 15 moles of gas at a temperature of 299K and a volume of 92L, what is the pressure of the gas?
Answer:
The pressure of the gas=4.002 atm
Explanation:
We are given that
R=0.0821
Number of moles, n=15
Temperature, T=299 K
Volume of gas, V=92 L
We have to find the pressure of the gas.
[tex]PV=nRT[/tex]
Substitute the values
[tex]P\times 92=15\times 0.0821\times 299[/tex]
[tex]P=\frac{15\times 0.0821\times 299}{92}[/tex]
[tex]P=4.002 atm[/tex]
Hence, the pressure of the gas=4.002 atm
Answer:
According to the ideal gas law equation,
PV = nRT (here, P = 5.5 atm, V = 10L, T = 298K, R = 0.0821 atmL/mol K)
or, n = RT/PV = (0.0821 X 298)/(5.5 X 10) = 0.44 moles of He gas
Explanation:
Describe the resistance through a
diode
Explanation:
A diode is an electrical element which offers the flow of current freely in one direction with very less resistance.
The given figure depicts a diode in forward bias, where the p-side and the n-side of the diode are connected to positive and negative terminals respectively. In such a case the current flows from the p-side to n-side of the p-n junction very easily and the value of the current increases rapidly after a certain voltage, this voltage is called threshold voltage.
We can deduce from the graph that the resistance of the diode reduces with increase in voltage. As resistance is given by the formula:
[tex]R=\frac{V}{i}[/tex]
After landing the aeroplane's momentum becomes zero. Explain how
the law of conservation holds here.
Answer:
The law of momentum conservation can be stated as follows. For a collision occurring between object 1 and object 2 in an isolated system, the total momentum of the two objects before the collision is equal to the total momentum of the two objects after the collision.
