Answer:
The energy required to break a covalent bond
Explanation:
When a chemical bond is formed, energy is released. When a chemical bond is broken, energy is absorbed.
We define the bond dissociation energy as the energy required to break a covalent bond. The process of covalent bond cleavage is endothermic hence energy is absorbed for the process to occur.
What volume (in liters) of a solution contains 0.14 mol of KCl?
1.8 M KCl
Express your answer using two significant figures.
Answer:
[tex]\boxed {\boxed {\sf 0.078 \ L }}[/tex]
Explanation:
We are asked to find the volume of a solution given the moles of solute and molarity.
Molarity is a measure of concentration in moles per liter. It is calculated using the following formula:
[tex]molarity= \frac{moles \ of \ solute}{liters \ of \ solution}[/tex]
We know there are 0.14 moles of potassium chloride (KCl), which is the solute. The molarity of the solution is 1.8 molar or 1.8 moles of potassium chloride per liter.
moles of solute = 0.14 mol KCl molarity= 1.8 mol KCl/ Lliters of solution=xSubstitute these values/variables into the formula.
[tex]1.8 \ mol \ KCl/ L = \frac { 0.14 \ mol \ KCl}{x}[/tex]
We are solving for x, so we must isolate the variable. First, cross multiply. Multiply the first numerator and second denominator, then the first denominator and second numerator.
[tex]\frac {1.8 \ mol \ KCl/L}{1} = \frac{0.14 \ mol \ KCl}{x}[/tex]
[tex]1.8 \ mol \ KCl/ L *x = 1*0.14 \ mol \ KCl[/tex]
[tex]1.8 \ mol \ KCl/ L *x = 0.14 \ mol \ KCl[/tex]
Now x is being multiplied by 1.8 moles of potassium chloride per liter. The inverse operation of multiplication is division, so we divide both sides by 1.8 mol KCl/L.
[tex]\frac {1.8 \ mol \ KCl/ L *x}{1.8 \ mol \ KCl/L} = \frac{0.14 \ mol \ KCl}{1.8 \ mol \ KCl/L}[/tex]
[tex]x= \frac{0.14 \ mol \ KCl}{1.8 \ mol \ KCl/L}[/tex]
The units of moles of potassium chloride cancel.
[tex]x= \frac{0.14 }{1.8 L}[/tex]
[tex]x=0.07777777778 \ L[/tex]
The original measurements of moles and molarity have 2 significant figures, so our answer must have the same. For the number we found, that is the thousandth place. The 7 in the ten-thousandth place tells us to round the 7 up to a 8.
[tex]x \approx 0.078 \ L[/tex]
There are approximately 0.078 liters of solution.
What is Bose Einstein state of matter and their examples
Answer:
A BEC ( Bose - Einstein condensate ) is a state of matter of a dilute gas of bosons cooled to temperatures very close to absolute zero is called BEC.
Examples - Superconductors and superfluids are the two examples of BEC.
Explanation:
What does quantization refer to?
Answer:
Quantization is the process of constraining an input from a continuous or otherwise large set of values (such as the real numbers) to a discrete set (such as the integers).
Explanation:
Quantization refers to the situation where an electromagnetic field consists of discrete energy parcels, photons.
What is Quantatization in Chemistry ?In Chemistry , the concept that a system cannot have any possible energy value but instead is limited to certain specific energy values (states). This states depend on the specific system in question.
Under this system, Energy could be gained or lost only in integral multiples of some smallest unit of energy, a quantum (the smallest possible unit of energy).
Hence, Quantization refers to the situation where an electromagnetic field consists of discrete energy parcels, photons.
Learn more about Quantum here ;
https://brainly.com/question/16746749
#SPJ2
Please help me fast! Pleaseee
I think 2 answer is write
Which of the following are examples of single replacement reactions? Select all that apply.
Answer:
Na2S(aq)+Cd(No3)2(aq)=CdS(s)+2NaNo3(aq)
Answer: it’s checkbox 2&3
What can be found on the periodic table?
A. the name of molecules formed by the element
B. the number of isotopes an element has
C. the date an element was discovered
D. the number of protons an element has
Answer:
I think the answer is..
The name of molecules formed by the element.
I hope it will help you !
Tapeworm is grouped in the phylum Platyhelminthes
Answer:
Tapeworm, also called cestode, any member of the invertebrate class Cestoda (phylum Platyhelminthes), a group of parasitic flatworms containing about 5,000 species. ... Tapeworms also lack a circulatory system and an organ specialized for gas exchange.
calculate the total consumer surplus in the amusement park market if they a 12
Answer:
The total consumer surplus is 240.
Explanation:
If p=12 then q=20
0.5×(36−12)×20=240
here's the graph to help you see the change.
The color cyan has a frequency of 5.902x10^14 What is the wavelength in nm ? Record your answer with 2
decimals.
The wavelength of the color cyan is 508 nm.
To solve the problem, we use the following equation that relates the frequency (ν) and the wavelength (λ) of a wave:
c = λ x ν
Given:
c = speed of light = 3.00 x 10⁸ m/s (is a constant)
ν = 5.902 x 10¹⁴ Hz = 5.902 s⁻¹
We introduce the data to calculate the wavelength in m:
λ = c/ν = (3.00 x 10⁸ m/s)/(5.902 s⁻¹) = 5.08 x 10⁻⁷ m
We know that 10⁻⁹m = 1 nm, so we convert λ to nm:
λ = 5.08 x 10⁻⁷ m x 1 nm/10⁻⁹m = 508 nm
To learn more about the relationship between frequency and wavelength in a wave, you can visit: https://brainly.com/question/4386945
What is the minimum pressure in kPa that must be applied at 25 °C to obtain pure water by reverse osmosis from water that is 0.690 M in sodium chloride and 0.08 M in zinc sulfate? Assume complete dissociation for electrolytes.
Answer:
1. Water purification method by reverse osmosis – membrane filtration
2. Method of purifying pure water by filter
3. Demineralization by ion exchange method
3. Demineralization by ion exchange method
Explanation:
Which of the following substances can be used to neutralize HF?
A: HF
B: SO2
C: HCI
D: NaOH
Answer:
option (D) NaOH is right answer
A neutralization reaction is "a reaction in which an acid and a base react to form water and a salt and involves H+ ions and OH- ions to produce water.
What is an acid?An acid is "any hydrogen-containing substance that is capable of donating a proton or hydrogen ion to another substance".
What is base?Base is "a substance that gets dissociated in an aqueous solution to form hydroxide ions OH-".
Hence, NaOH can be used to neutralize HF.
To learn more about Neutralization reaction here
https://brainly.com/question/24367029
#SPJ2
If 7 mol of copper reacts with 4 mol of oxygen, what amount of copper (II) oxide is produced? What amount of the excess reactant remains?
Answer:
7 mol CuO
0.5 mol O₂
Explanation:
Step 1: Write the balanced equation
2 Cu + O₂ ⇒ 2 CuO
Step 2: Identify the limiting reactant
The theoretical molar ratio (TMR) of Cu to O₂ is 2:1.
The experimental molar ratio (EMR) of Cu to O₂ is 7:4 = 1.75:1.
Since TMR > EMR, Cu is the limiting reactant
Step 3: Calculate the amount of CuO produced
7 mol Cu × 2 mol CuO/2 mol Cu = 7 mol CuO
Step 4: Calculate the excess of O₂ that remains
The amount of O₂ that reacts is:
7 mol Cu × 1 mol O₂/2 mol Cu = 3.5 mol O₂
The excess of O₂ that remains is:
4 mol - 3.5 mol = 0.5 mol
HELP!!!!! Substance A and substance B are mixed together. To separate the mixture, water is added, and substance A is filtered out. Then, the remaining liquid is heated to remove the water, leaving a residue of substance B. Which statement about substance A and substance B could be correct?
A. Substance A is rice, and substance B is sugar.
B. Substance A is alcohol, and substance B is salt.
C. Substance A is sand, and substance B is alcohol.
D. Substance A is sugar, and substance B is instant coffee.
The statement that "substance A is rice, and substance B is sugar" is correct.
WHAT IS A MIXTURE?
A mixture in chemistry is a substance that contains two or more different substances. One notable characteristics of a mixture is that it can easily be separated using physical means.According to this question, a mixture contains two substances A and B. Water is added to this mixture for easy separation.
Substance A is filtered out. This means that substance A is a solid that is insoluble in water. This substance is RICE. The remaining liquid is heated to remove the water content leaving a residue of substance B. This shows that substance B is also a solid but soluble in water. SUGAR best fits this description.Therefore, in the mixture of two substances A and B, substance A is rice, and substance B is sugar.
Learn more at: https://brainly.com/question/6594631
For each reaction, write the chemical formulae of the oxidized reactants.
a. ZnCl2 (aq) + 2Na(s) → Zn(s) + 2NaCl(aq)
b. Al(s) + FeBrz (aq) → AlBrz (aq) + Fe(s)
c. FeSO4 (aq) + Zn (s) → Fe(s) + ZnSO4(aq)
Answer:
a. Na(s); b. Al(s); c. Zn(s)
Explanation:
Let's consider the following redox reactions.
a. ZnCl₂ (aq) + 2 Na(s) → Zn(s) + 2 NaCl(aq)
Na is oxidized because its oxidation number increases from 0 to +1 (in NaCl) whereas Zn is reduced because its oxidation number decreases from 2+ (in ZnCl₂) to 0.
b. Al(s) + FeBr₃ (aq) → AlBr₃ (aq) + Fe(s)
Al is oxidized because its oxidation number increases from 0 to +3 (in AlBr₃) whereas Fe is reduced because its oxidation number decreases from 3+ (in FeBr₃) to 0.
c. FeSO₄ (aq) + Zn(s) → Fe(s) + ZnSO₄(aq)
Zn is oxidized because its oxidation number increases from 0 to +2 (in ZnSO₄) whereas Fe is reduced because its oxidation number decreases from 2+ (in FeSO₄) to 0.
Hydrogengasand oxygengas react to form water vapor. Suppose you have of and of in a reactor. Calculate the largest amount of that could be produced. Round your answer to the nearest .
The question is incomplete. The complete question is :
Hydrogen [tex](H_2)[/tex] gas and oxygen [tex](O_2)[/tex] gas react to form water vapor [tex](H_2O)[/tex]. Suppose you have 11.0 mol of [tex]H_2[/tex] and 13.0 mol of [tex]O_2[/tex] in a reactor. Calculate the largest amount of [tex]H_2O[/tex] that could be produced. Round your answer to the nearest 0.1 mol .
Solution :
The balanced reaction for reaction is :
[tex]$2H_2(g) \ \ \ \ + \ \ \ \ \ O_2(g)\ \ \ \rightarrow \ \ \ \ 2H_2O(g)$[/tex]
11.0 13.0
11/2 13/1 (dividing by the co-efficient)
6.5 mol 13 mol (minimum is limiting reagent as it is completely consumed during the reaction)
Therefore, [tex]H_2[/tex] is limiting reagent. It's stoichiometry decides the product formation amount from equation above it is clear that number of moles for [tex]H_2O[/tex] will be produced = number of moles of [tex]H_2[/tex]
= 11.0 mol
Help please due today
Answer:
It is a becaues i am a doctor and i know about that
Explanation:Just here to help
How is a light bulb related to radiation?
A. Light bulbs do not have anything to do with radiation.
B. A light bulb emits radiation when its filament is burned out and can longer emit light. This makes it important to remove dead lightbulbs as soon as they wear out.
C. As light is emitted from the filament, the energy in the metal is replaced as lightbulbs absorb background radiation. This prevents the filament from burning out quickly but the radiation cannot be used as power so electricity is still required for the lightbulb to work.
D. The light emitted by a light bulb is a form of radiation that occurs when the filament heats up and its thermal emission gains enough energy to move into the visible spectrum.
Answer:
As light is emitted from the filament, the energy in the metal is replaced as lightbulbs absorb background radiation. This prevents the filament from burning out quickly but the radiation cannot be used as power so electricity is still required for the lightbulb to work.
3 molecules NaOH determine the amount of grams
Answer:
In three mocelus 0.0001 gram.
Calculate the enthalpy change for the reaction of hydrogen and chlorine using the bond energies below.
"BOND." " BOND ENERGY "
H-H. 436
CL-CL. 242
H-CL. 431
Answer:
final-intial temperature= enthalpy change
the ability for carbon to form long chain or rings is
A chemist determines by measurements that moles of bromine liquid participate in a chemical reaction. Calculate the mass of bromine liquid that participates. Round your answer to significant digits.
Answer:
5.20 grams of Br₂
Explanation:
From our previous knowledge;
We understand that:
The number of moles of a given element = mass of the element divided by its molar mass.
Mathematically:
[tex]\mathbf{no \ of \ moles =\dfrac{ mass}{ molar \ mass}}[/tex]
From the given information, let's assume that the 0.065 moles of liquid -bromine partake in the reaction.
From the periodic table, the molar mass of Bromine is = 79.9 g/mol
As such, the mass of liquid that partakes is calculated as:
0.065 mol = mass/ 79.9 g/mol
mass = 0.065 mol × 79.9 g/mol
mass of liquid that partakes in the reaction = 5.20 grams of Br₂
what are the five main points of kinetic theory of gas?
The kinetic-molecular theory of gases assumes that ideal gas molecules
(1) are constantly moving;
(2) have negligible volume;
(3) have negligible intermolecular forces;
(4) undergo perfectly elastic collisions; and
(5) have an average kinetic energy proportional to the ideal gas's absolute temperature.
The five main postulates of the KMT are as follows:
(1) the particles in a gas are in constant, random motion,
(2) the combined volume of the particles is negligible
(3) the particles exert no forces on one another,
(4) any collisions between the particles are completely elastic.
(5) the average kinetic energy of the particles is proportional to the temperature in kelvins.
what is the charge on the Mn ions in Mn2o3? 1+, 2+, 3+,3-,4+?
In an ELISA, the compound 4-chloro-1-naphthol is used because:_______
a. it turns color in the presence of an enzyme that is bound to the secondary antibody
b. it helps the primary antibody bind to the protein
c. it helps the secondary antibody to bind to the protein
d. all of the choices
Answer:
a. It turns color in the presence of an enzyme that us bound to the secondary antibody.
Explanation:
The compound chloronapthenel is used in the reaction because it changes the color in the presence of an enzyme. It is strong organic compound which is used in biochemical processes.
Give the amino acid sequence in the following tetrapeptide using both 3-letter and 1-letter abbreviations for the amino acids. (Capitalize amino acid abbreviations appropriately.) ball
Answer:
ggggggggggggg
Explanation:
gggggggggggthyjum
The solubility of lithium fluoride, LiF, is 1.6 g/L, or 6.2 x 10â2 M.
a. Write the balanced solubility equilibrium equation for LiF.
b. Determine the molar concentration of the lithium ion and the fluoride ion.
c. Write the Ksp expression for the reaction.
d. Calculate Ksp for lithium fluoride.
Answer:
a. LiF(s) ⇄ Li⁺(aq) + F⁻(aq)
b. [Li⁺] = [F⁻] = 6.2 x 10⁻² M
c. Ksp = [Li⁺] [F⁻]
d. Ksp = 3.8 × 10⁻³
Explanation:
The solubility (S) of lithium fluoride, LiF, is 1.6 g/L, or 6.2 x 10⁻² M.
a. The balanced solubility equilibrium equation for LiF is:
LiF(s) ⇄ Li⁺(aq) + F⁻(aq)
b. We will make an ICE chart.
LiF(s) ⇄ Li⁺(aq) + F⁻(aq)
I 0 0
C +S +S
E S S
Then, [Li⁺] = [F⁻] = S = 6.2 x 10⁻² M
c. The solubility product constant, Ksp, is the equilibrium constant for a solid substance dissolving in an aqueous solution.
Ksp = [Li⁺] [F⁻]
d.
Ksp = [Li⁺] [F⁻] = (6.2 x 10⁻²)² = 3.8 × 10⁻³
What is the correct ratio of carbon to hydrogen to oxygen in glucose (CH1206)?
•12:12:6
•2:1:1
•1:2:1
•6:6:12
Answer:
1:2:1 is the correct ratio of carbon hydrogen to oxygen in glucose.
6. Plants play a vital role in the environment because photosynthesis
ОООО
A. uses atmospheric oxygen and carbon dioxide to produce sugars and water.
B. uses atmospheric oxygen and water to produce carbon dioxide and water.
C. uses atmospheric carbon dioxide and water to produce sugars and oxygen.
D. uses atmospheric oxygen to produce sugars and water.
Plants play a vital role in the environment because photosynthesis uses atmospheric carbon dioxide and water to produce sugars and oxygen. Option C is correct.
Photosynthesis is the process by which plants, algae, and some bacteria convert light energy into chemical energy in the form of glucose (sugar). This process occurs in the chloroplasts of plant cells and requires the presence of sunlight, carbon dioxide (CO₂), and water (H₂O).
During photosynthesis, plants absorb carbon dioxide from the atmosphere through tiny openings called stomata in their leaves. At the same time, they take in water from the soil through their roots. Through a series of complex chemical reactions, the energy from sunlight is used to combine carbon dioxide and water, resulting in the production of glucose (sugar) and the release of oxygen (O₂) as a byproduct.
This process is represented by the equation:
6CO₂ + 6H₂O + sunlight → C₆H₁₂O₆ (glucose) + 6O₂
Plants use the glucose produced through photosynthesis as a source of energy for various metabolic processes and growth. The released oxygen is essential for the survival of other organisms, including humans, as it is used in cellular respiration to release energy from glucose.
Hence, C. is the correct option.
To know more about chemical energy here
https://brainly.com/question/1371184
#SPJ2
A chlorine (CI) atom has 7 valence electrons. Which of the following would be the most likely way for a chlorine atom to become stable?
A. Lose 5 electrons
B. Gain 2 electrons
C. Gain 1 electron
D. Lose 7 electrons
Answer:
Option C. Gain 1 electron
Explanation:
Valence electron(s) are the electron(s) located on the outermost shell of an atom. Valency is simply defined as the combining power of an atom.
Chlorine (Cl) atom has 7 valence electron. This implies that Cl needs just one electron to complete it's octet configuration. It will be difficult for Cl to lose any of it's valence electron(s). Cl can either gain or share 1 electron to become stable.
Thus, considering the options given in the question above, option C gives the correct answer to the question.
what is calcium anyone tell plz
Answer:
Calcium is a chemical element with the symbol Ca and atomic number 20.
Calcium is a mineral that is necessary for life. In addition to building bones and keeping them healthy, calcium enables our blood to clot, our muscles to contract, and our heart to beat. About 99% of the calcium in our bodies is in our bones and teeth.
