A boy is pulling a 150 kg crate with a force of 1150 N. If the crate experiences a frictional force of 490 N, find:

a) The acceleration of the crate.

b) The normal force acting on the crate.

Answers

Answer 1
For the aceleration:

First, let's find the resultant, and applicate 2nd law of Newton using the resultant, so:

R = ma

F - Ff = ma

Data:

F = Force = 1150 N

Ff = Friction force = 490 N

m = Mass = 150 kg

a = Aceleraction = ?

Replacing according our data:

1150 N - 490 N = 150 kg * a

660 N = 150 kg * a

660 N / 150 kg = a

a = 4,4 m/s²   ← Aceleration of the object

For the normal force:

The normal force IS NOT the resultant force, the normal force's the force between the ground and the object, in another words, is the weight of the object, and for the weight:

w = mg

w = 150 kg * 10 m/s²

w = 1500 N   ← Normal force between object and ground.


Related Questions

A 120 Ω resistor, a 60 Ω resistor, and a 40 Ω resistor are connected in parallel and placed across a potential difference of 12.0 V. What is the equivalent resistance of the parallel circuit?

Answers

Answer:

The equivalent resistance of the parallel circuit would be 20 Ω

Explanation:

To calculate the resistance of resistors connected in parallel, the formula to be used is

1/R = 1/R₁ + R₂ + R₃ + R₄...

1/R = 1/120 + 1/60 + 1/40

1/R = (1 + 2 + 3)/120

1/R = 6/120

1/R = 1/20 Ω

This can be rewritten or cross-multiplied to be

R × 1 = 20 × 1

R = 20 Ω

The equivalent resistance (R) would then be 20 Ω

Pls help :( this is really hard and I need to pass this grade lol

Answers

The answer is (C) Diagram 3

If 100.0 g of a substance releases 45 kJ of energy as it cools from 13.0°C to –15.0°C, what is the specific heat capacity of the substance?

Answers

Answer:

16,071.42J/kgK

Explanation:

The formula for expressing the quantity of heat released is expressed as;

Q = mcΔt

m is the mass of the substance = 100g - 0.1kg

c is the specific heat capacity of the substance

Δt is the change in temperature = 13 -(-15) = 28°C

Substitute and get c;

45000 = 0.1c(28)

2.8c = 45000

c = 45000/2.8

c = 16,071.42J/kgK

Hence the specific heat capacity of the substance is 16,071.42J/kgK

A tractor trailer truck traveling at a speed of 105 feet/second skids to a stop in 12 seconds. Determine the skidding distance of the truck.
Please help.​

Answers

Answer:

1260ft

Explanation:

Given parameters:

Speed  = 105ft/s

Time  = 12s

Unknown:

Skidding distance of the truck  = ?

Solution:

To solve this problem:

       Distance  = speed x time

Now insert the parameters and solve;

  Distance  = 105 x 12  = 1260ft

A dog starts at position x=2.50m, and undergoes a displacement of 8.25m. What is its final position?

Answers

Answer:

Civil law deals with behavior that constitutes an injury to an individual or other private party, such as a corporation. Examples are defamation (including libel and slander), breach of contract, negligence resulting in injury or death, and property damage.

Explanation:

10.75 m


Displacement is how far the dog is from its original position so use, addition initial + displacement = final
2.50+8.25=10.75

A girl during a hike has a bottle of mineral water in her haversack. The bottle has 2 litres of water in it (2ltr. weigh 2kg). The water gets heated by the sun by 5 °C. How much heat has the water absorbed from the sun?

Answers

Answer:

Q = 41800[J]

Explanation:

These types of problems can be solved using the following heat transfer equation for quarps that increase or decrease their temperature as a function of mass.

[tex]Q=m*C_{p}*DT[/tex]

where:

Q = Heat absorbed [J]

m = mass = 2 [kg]

DT = temperature change = 5 [°C]

Cp = specific heat of the water = 4180 [J/kg*°C]

[tex]Q=2*4180*5\\Q=41800[J][/tex]

Units of energy (Joules) [J]

please help, brainest if correct

Answers

Answer:  B

Its b increased risk of disease


PLEASE ANSWER, I HAVE 5 MINUTES!!!!

Discuss the changes in potential energy, kinetic energy, and total energy for a
skateboarder going up and down on a half-pipe (U-shaped) ramp. Specifically address
the energies when the skater is at the highest point (A), half-way down the ramp (B),
and at the lowest point (C).

Answers

Answer:

I HAD THE SAME QUESTION AND SEARCHED IT UP AND GOT THE ANSWERS.

Explanation:

Which of the following is a physical state of matter? *
A mass
B volume
C liquid

Answers

The only option out of these that is a state of matter would be C - Liquid

If the sun were to collapse into a black hole, what would the radius be?

Answers

Answer:

If the Sun, with its mass of 1 MSun, were to become a black hole the Schwarzschild radius would be about 3 kilometers; thus, the entire black hole would be about one-third the size of a neutron star of that same mass

Answer:

It would be 1/3rd size of a neutron star

Explanation:

the Schwarzschild radius would be about 3 kilometers; thus, the entire black hole would be about one-third the size of a neutron star of that same mass.

A current of 8 A flows through a conductor. The number of electrons passing through the conductor in each second will be

Answers

Answer:

8=3×1019 electrons per second.

Explanation:

Answer:

here

Explanation:8=3×1019 electrons per second.

What is the acceleration of an object that has a mass of 10kg and is pushed with a force of 50n

Answers

Answer:

5m/s/s

Explanation:

force = mass x acceleration

50 = 10a

a=5m/s/s

The speed you read on a speedometer is ____.

Answers

Answer:

[tex]\leq 40[/tex]

Explanation:

So if you’re going 40mph, your speedometer may read up to 50.25mph - but it can never read less than 40mph. In order to stay within the law, carmakers calibrate their speedometers to slightly overreport their vehicles' speeds.

Transfer of charge by touching is called... induction or conduction?

Answers

Answer:

Transfer of charge by touching is called conduction.

Pleaaaase help meeee
Read the following case and discuss how you would respond to the situation.
PROBLEM:

You have been assigned the position of Environmental Engineer for one of several local
robotics manufacturers whose water discharges flow into a lake in a flourishing tourist area.
Although all the robotics companies in the area are marginally profitable, they compete for
the same customers. Included in your responsibilities is the monitoring of water and air
discharges
at your plant and the periodic preparation of reports to be submitted to the Department of
Natural Resources. You have just prepared a report that indicates that the
level of pollution in the plant's water discharges slightly exceeds the legal limitations. Your
boss, the Plant Manager, says you should regard the excess as a mere
"technicality," and he asks you to "adjust" the data so that the plant appears to be in
compliance. He says that the slight excess is not going to endanger human or fish
life any more than if the plant were in compliance. On the other hand, he says, solving the
problem would require a very heavy investment in new equipment. He
explains, "We can't afford new equipment. It might even cost a few jobs. It will set us
behind our competitors. Besides the bad publicity we'd get, it might scare off
some of the tourist industry, making it worse for everybody."

1) How do you think you should respond to your boss's request? Explain :

2) Define the problem :

3) what are the possible results of decision?

4) is there any information about the situation that is not obvious or available in the paragraph?

5) what are the ethical issues to consider in this situation

6) How did you decide to handle the situation what did you decide to do?








Answers

Answer:

3

Explanation:

Please Help Me!!!........​

Answers

Answer:

B

Polar covalent bonds and van dar Waals forces are weak attractive forces between discrete molecules of a simple molecular structure.

Ionic bonds are strong electrostatic forces of attraction between oppositely charged ions.

Hydrogen bonds are very strong bonds between hydrogen and a highly electronegative atom e.g Oxygen, fluorine, nitrogen

A train leaves the station heading south on the tracks. It takes the train 5 seconds to reach 50 miles per hour. It completes the entire 100-mile trip in two hours. Calculate the train's average speed and velocity over the two-hour trip. Show your work. Identify if each of the measurements are a scalar or vector quantity

Answers

divide until you figure out how many miles they went per second. If it takes 5 seconds to reach 50 miles per hour it took 10 seconds per every 10 miles meaning each mile took 1 second. (Not actually possible but the answer) So, If it finished a 100 mile trip in 2 hours it took an hour for 50 miles. If it took 1 hour for 50 miles divide 60/50 which gets you 1.2 so it took 1.2 miles per minute meaning the car went 120 miles per hour I believe. I hope this helps :)

Select the correct answer.
Which diagram represents an object in equilibrium?
ОА.
applied
force = 20 N
force due to
friction = 15 N
OB.
applied
force = 20 N
force due to
friction = 20 N
OC.
applied
force = 15 N
force due to
friction = 25 N
OD.
applied
force = 30 N
force due to
friction = 20 N
ОЕ.
applied
force = 30 N
force due to
friction = 15 N
Reset
Next
My

Answers

Answer:

B

Explanation:

The force and friction cancel each other.

20N - 20N = 0N acting on the object.

What units would you use to measure a virus (nanometers micrometers millimeters)

Answers

nanometers

to measure a virus you use nanometers

Sam scored 98, 25, 105, 62 and 65 runs in 5 matches. What was the average score per match?

Answers

Answer:

71

Explanation:

6. What charge is in the nucleus?
a. negative charge
b. positive charge
C. no charge
d. positive and negative charges

Answers

The nucleus is a Negative charge I believe
The nucleus has a positive charge because it contains the protons :)) hope this helped

According to the law of conservation of energy, mechanical energy can be changed to heat energy.

Answers

Answer:

The answer to this question is given below in this explanation section.

Explanation:

                     " law of conservation of energy"

The law of conservation of energy states that energy can neither be created nor destroyed only converted from one form of energy into another.This mean that a system always has a same account of a energy,unless it is added from the outside.This is particularly confusing in the case of non conversation forces,where energy is converted from ,mechanical energy into thermal energy.but the overall energy does remain the same.The only way to use energy is to transform energy from one form to another.

The amount of energy in any system than it is determined by the following equation.

Ut=Ui +W+Q

Ut is the total internal energy of a system.Ui is the initial internal energy of a system.W is the work done by or on the system.Q is the heat added to or removed by the system.

It is also possible to determined the change in internal energy of the system using the equation.

ΔU=W+Q

The mechanical energy of a system increases provided their is no loss of energy due to friction.The energy would transform to kinetic energy when the speed is increasing.Te mechanical energy of a system remain constant provided their is no loss of energy due to friction.

The law of conversation of energy which say that in a closed system total energy is conserved that is it constant.

KE1 + PE1=KE2+PE2

 

Which of the following is a layer of the solid Earth? A. convecting mantle B. Ring of Fire C. biosphere D. atmosphere

Answers

Answer:

It's a cause that's the last layer

Answer:

I believe the answer is A

Explanation:

It is not the ring of fire because the ring of fire is the result of tectonic plates moving. It is not the biosphere because biosphere is the regions of the surface.  The convecting mantle is the solid layer of the Earth because the mantle is mostly solid. The atmosphere is a solid plastic layer of the Earth. I hope this helps.

What is the net force EF?

Answers

Answer:

Physics Net Force

Explanation:

Physics Net Force

The net force is the combined force of all individual forces acting on an object. Newton's First Law can be seen to be the special case in the Second Law when F, the net force, is zero. When that happens, the acceleration a must also be zero.

Hope this helped you!!

In this activity, you will analyze the motion of a cart being pulled up an inclined plane at a constant speed. The angle of the incline can be modified by 10 degrees increments between the values of 30 degrees and 90 degrees. Three different masses can be selected - 2.0kg, 3.0kg, and 4.0kg in each simulation the cart is pull d to the same height - 1.0 meter above the original starting position. For each simulation, the force that must be applied is reported on the screen. The displacement of the cart can be measured using the cm-ruler that is displayed for each trial. Can some help me

Answers

Answer:

darn this too much lololpop

Most metals have...

a. Atoms that are spread out, and low specific heats

b. Atoms that are close, and low specific heats

c. Atoms that are spread out, and high specific heats

d. Atoms that are close, and high specific heats

Answers

I think it’s B I THINK

Please helpp !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Answers

B. a car on a track, a stop watch, and a ruler

What type of system is a black hole? Explain how you know.

Answers

Answer:

A black hole is a region of spacetime where gravity is so strong that nothing—no particles or even electromagnetic radiation such as light—can escape from it.[1] The theory of general relativity predicts that a sufficiently compact mass can deform spacetime to form a black hole.[2][3]

The boundary of the region from which no escape is possible is called the event horizon. Although the event horizon has an enormous effect on the fate and circumstances of an object crossing it, according to general relativity it has no locally detectable features.[4] In many ways, a black hole acts like an ideal black body, as it reflects no light.[5][6] Moreover, quantum field theory in curved spacetime predicts that event horizons emit Hawking radiation, with the same spectrum as a black body of a temperature inversely proportional to its mass. This temperature is on the order of billionths of a kelvin for black holes of stellar mass, making it essentially impossible to observe directly.

Objects whose gravitational fields are too strong for light to escape were first considered in the 18th century by John Michell and Pierre-Simon Laplace.[7] The first modern solution of general relativity that would characterize a black hole was found by Karl Schwarzschild in 1916, although its interpretation as a region of space from which nothing can escape was first published by David Finkelstein in 1958. Black holes were long considered a mathematical curiosity; it was not until the 1960s that theoretical work showed they were a generic prediction of general relativity. The discovery of neutron stars by Jocelyn Bell Burnell in 1967 sparked interest in gravitationally collapsed compact objects as a possible astrophysical reality.

Black holes of stellar mass are expected to form when very massive stars collapse at the end of their life cycle. After a black hole has formed, it can continue to grow by absorbing mass from its surroundings. By absorbing other stars and merging with other black holes, supermassive black holes of millions of solar masses (M☉) may form. There is consensus that supermassive black holes exist in the centers of most galaxies.

The presence of a black hole can be inferred through its interaction with other matter and with electromagnetic radiation such as visible light. Matter that falls onto a black hole can form an external accretion disk heated by friction, forming quasars, some of the brightest objects in the universe. Stars passing too close to a supermassive black hole can be shred into streamers that shine very brightly before being "swallowed."[8] If there are other stars orbiting a black hole, their orbits can be used to determine the black hole's mass and location. Such observations can be used to exclude possible alternatives such as neutron stars. In this way, astronomers have identified numerous stellar black hole candidates in binary systems, and established that the radio source known as Sagittarius A*, at the core of the Milky Way galaxy, contains a supermassive black hole of about 4.3 million solar masses.

On 11 February 2016, the LIGO Scientific Collaboration and the Virgo collaboration announced the first direct detection of gravitational waves, which also represented the first observation of a black hole merger.[9] As of December 2018, eleven gravitational wave events have been observed that originated from ten merging black holes (along with one binary neutron star merger).[10][11] On 10 April 2019, the first direct image of a black hole and its vicinity was published, following observations made by the Event Horizon Telescope in 2017 of the supermassive black hole in Messier 87's galactic centre.[12][13][14]

Blackness of space with black marked as center of donut of orange and red gases

The supermassive black hole at the core of supergiant elliptical galaxy Messier 87, with a mass about 7 billion times that of the Sun,[15] as depicted in the first false-colour image in radio waves released by the Event Horizon Telescope (10 April 2019).[16][12][17][18] Visible are the crescent-shaped emission ring and central shadow,[19] which are gravitationally magnified views of the black hole's photon ring and the photon capture zone of its event horizon. The crescent shape arises from the black hole's rotation and relativistic beaming; the shadow is about 2.6 times the diameter of the event horizon.[12]

Schwarzschild black hole

Simulation of gravitational lensing by a black hole, which distorts the image of a galaxy in the background

Gas cloud being ripped apart by black hole at the centre of the Milky Way (observations from 2006, 2010 and 2013 are shown in blue, green and red, respectively).[20]

Science help please!

Answers

Answer:

104 N

Explanation:

m = 1300 kg

a = 0.08m/s^2

F = 1300*0.08

F = 104 N

Newtons is the unit of force.

What is the momentum of a 120 pound bicyclist that is traveling at 25 mph?

Answers

momentum’s equation is p=mv

p=(120)(25)
p=3000


The biker’s momentum is 3000kgm/s
Other Questions
please help me please will give brainliest just write a short summary which of these is not a moleculeA) DNA B) water molecules C) single atoms D) medicines Find the missing angles. Describe the difference between an idea and a business opportunity. 24. Four identical rocks four four identical rocks were dropped into a stream and werewashed downstream. Which of the rocks below was prob-ably transported the least distance. 1/2=2m then what is m? If anyone knows a lot about Macbeth by Shakespeare please help me!!! Plz help me Im confused Do you guys know how to do this. The circle with O has a circumference of 8pi inches. The central angle is 60 degrees. what is the length of the minor arc BSA 1Jada made 6 cups of blueberry jam and divided the jam equally among 4 containers. How much jam went in each container? I pick you as brainlist What is the nth term of each linear pattern? 85,80,75,70 military why was it important to sparta? Provide at least 1 example of a mutationthat does not have a negative effect onthe individual.PLEASE HELP ME Can someone help me understand how to do this If f(x) = 2x, which of the following shows the graph of f(x) = 2(x) + 2? 3x+y=10Which are solutions of the linear equation select all that apply(1,6)(2,4)(3,1)(4,-1)(5,-5) Write a short summary of the text that includes three of the central ideas the author presents in "Should Metal Bats be Banned in Youth Baseball?".On March 11, 2010, a high school pitcher in California was facing a player using a metal bat, when he was hit in the temple by a line drive travelling 100 mph. His skull was crushed, and he spent weeks in a coma. Fortunately, after surgery and months of rehabilitation, he survived. The accident brought to the forefront an issue that has been a safety concern ever since the 1970s when metal bats began being used instead of wooden bats. Metal bats are dangerous and should be banned by youth sport leagues for several reasons. Baseballs hit with metal bats travel at a higher rate of speed than those hit with wooden bats. Researcher J.J. Crisco studied aluminum bats and found that they produced a trampoline effect, which means the baseball springs off of the bat at a high rate of speed. This happens so fast that pitchers and infielders dont have time to react, which places them in danger. The New York Times reported that baseballs hit with metal bats travel almost 20 mph faster than baseballs hit with wooden bats. This is a huge difference to a player trying to make a play on a line drive in time. Consequently, the high rate of speed makes using a metal bat dangerous. In addition, there have been many instances of players getting hurt by baseballs hit with metal bats. According to the Consumer Product Safety Commission, between 1991 and 2001, 18 players were killed by batted balls, and only two involved wooden bats. This proves that wood bats are safer than metal. Also, The New Yo r k Times reports that several lawsuits have been won by parents who sued metal bat makers after their child had been hurt. After being presented with evidence about the dangers of aluminum bats, judges and juries agreed they are responsible for injuries. Therefore, the high rate of injuries proves that metal bats are unsafe. Some people claim that wooden bats are too expensive to supply to youth leagues because they are not as long lasting. This is true. Even so, a higher cost should not matter when safety is concerned. Metal bats endanger the lives of young baseball players. First, they make the baseball travel at a high rate of speed, making it difficult to catch. Secondly, they have resulted in many injuries. Banning metal bats is necessary in order to save the lives of young players, and everyone concerned should contact their local lawmakers. Rule in the hands of a few people that keeps one or a few in power describes _____________________. A. Constitutional MonarchiesB. Authoritarian RuleC. Democratic RepublicsD. Parliamentary Democracies Which expression is equivalent to 3sqrt 2y^3 x 7sqrt 18y , if y > 0