A: Branched Group Type and Location:
(Hint: There are two, but they are the same type)

b. Longest Chain:

c. Functional Group:

d. Full Name of Compound:

The correct answer is (B) 2NO(g) + Cl2 (g) + 2NOCI (8). Increasing the total pressure on the reaction mixture will increase the yield of products. For the second question, the correct answer is (E) 7 x 102. Kp for the molar solubility of magnesium carbonate is 3.6 x 10-4.

Chemical equilibrium refers to the situation in a chemical reaction where both the reactants and products are present in concentrations that have no further tendency to change over time, preventing any discernible change in the system's properties. When the forward reaction and the reverse reaction go forward at the same speed, this condition results. The forward and backward reactions typically have equal, if not zero, reaction rates. The concentrations of the reactants and products do not change on a net basis as a result. Dynamic equilibrium is the name given to such a situation.

The reaction's Gibbs free energy, G, must be taken into account at constant temperature and pressure. The Helmholtz free energy, A, must be taken into account at constant temperature and volume. The reaction's entropy, S, must be taken into account at constant internal energy and volume.

In geochemistry and atmospheric chemistry, where pressure changes are considerable, the constant volume case is crucial.

It is thought about the case of constant pressure. By taking into account chemical potentials, the relationship between the Gibbs free energy and the equilibrium constant can be discovered.

The Gibbs free energy for the reaction, G, under constant temperature and pressure in the absence of an applied voltage, depends only on the degree of the reaction: (Greek letter xi), and can only decrease in accordance with the second law of thermodynamics. That indicates that if the reaction occurs, the derivative of G with respect to must be negative; at equilibrium, this derivative equals zero.

For more such questions on pressure , Visit:

https://brainly.com/question/24719118

#SPJ11

140.4 grams of dinitrogen pentoxide are produced from  104.0 grams of oxygen and 204.0 grams of nitrogen.

To calculate the mass of dinitrogen pentoxide that could be formed from 104.0 grams of oxygen and 204.0 grams of nitrogen, we need to use stoichiometry.

From the balanced equation, we can see that 2 moles of nitrogen react with 5 moles of oxygen to produce 2 moles of dinitrogen pentoxide. Therefore, we need to determine the limiting reactant in this reaction, which is the reactant that is completely consumed and determines the amount of product that can be formed.

To do this, we can calculate the number of moles of each reactant:

The ratio of moles of nitrogen to moles of oxygen is 7.29/3.25 ≈ 2.24/1. Therefore, oxygen is the limiting reactant because we need 5 moles of oxygen for every 2 moles of nitrogen.

Now we can use the amount of oxygen to calculate the amount of dinitrogen pentoxide that can be formed:

Finally, we can calculate the mass of dinitrogen pentoxide using its molar mass:

Therefore, 104.0 grams of oxygen and 204.0 grams of nitrogen can produce a maximum of 140.4 grams of dinitrogen pentoxide.

learn more about stoichiometry

https://brainly.com/question/14935523

#SPJ11

The percent yield of diacetyl ferrocene in the given unbalanced reaction is 144.5%. The answer is option A. 3.

Explanation : To calculate the percent yield of diacetyl ferrocene in the following unbalanced reaction, use the following formula:
Percent Yield = (Mass of Isolated Product / Theoretical Mass of Product) x 100%
To find the Theoretical Mass of Product, use the following formula:

Theoretical Mass of Product = (MW of Reactant * Mass of Reactant Used) / MW of Product
Substituting in the values provided:
Theoretical Mass of Product = (186.03 * 210mg) / 270.10 = 155.46mg

Percent Yield = (225mg / 155.46mg) x 100% = 144.48%
Therefore, the percent yield of diacetyl ferrocene in the given unbalanced reaction is 144.5%.

For more such questions on diacetyl ferrocene

https://brainly.com/question/19165806

#SPJ11

The answer is C) 0.5 kg. This is because Plutonium-238 has a half-life of 87.7 years, which means that after 87.7 years, half of the original amount of Plutonium-238 will remain. In this case, that would be 2 kg * 0.5 = 0.5 kg.

Plutonium-238 is a radioactive element used as a power source in spacecraft like Voyager and New Horizons. It has a half-life of 87.7 years. Suppose we have 2 kg of plutonium-238 right now. Radioactive decay is a random event. So, it is impossible to predict when a specific atom will decay. But we can find how much radioactive material is remaining after a specific period of time.

The half-life of a radioactive material is the time required for half of the radioactive material to decay. The formula to calculate the remaining material is:

N(t) = N0 × (1/2)^(t/t1/2)

Where N(t) is the remaining material at time t, N0 is the initial material, t1/2 is the half-life, and t is the elapsed time.

The initial material is 2 kg, half-life is 87.7 years, and the elapsed time is also 87.7 years.

N(87.7) = 2 kg × (1/2)^(87.7/87.7)= 1 kg × 0.5= 0.5 kg

Therefore, the amount of plutonium remaining after 87.7 years will be 0.5 kg. So, the answer is option C.

For more such questions on Plutonium , Visit:

https://brainly.com/question/13217330

#SPJ11

The reaction involved in the galvanic cell made from a half-cell consisting of a silver electrode in 1 M silver nitrate solution and a half-cell consisting of a zinc electrode in 1 M zinc nitrate is given as follows:2 Ag(s) + Zn2+ (aq) → Zn(s) + 2 Ag+ (aq)The standard cell potential at 25 °C for the given reaction can be determined using the following formula: E°cell

= E°cathode - E°anodeHere, the E°cathode and E°anode represent the standard reduction potentials of cathode and anode respectively. The values of these standard reduction potentials can be obtained from the standard reduction

potentials table.Using the values of standard reduction potentials from the table, we have:E°cell = E°Ag+ / Ag - E°Zn2+ / Zn= +0.80 V - (-0.76 V)= +1.56 VThe reaction is spontaneous at standard conditions because the calculated standard

cell potential is positive (+1.56 V). Therefore, the reaction will proceed spontaneously from left to right direction.The bolded non-consecutive keywords are: spontaneous, standard conditions, galvanic cell, reduction potentials.

For more similar questions on topic Electrochemistry.

https://brainly.com/question/20513633

#SPJ11

Answer:

Bond enthalpy is always positive because energy is required to break chemical bonds. Energy is released when a bond forms between gaseous fragments.

Changing the nature of the halide, the nature of the solvent, the relative concentrations of the reactants, altering the temperature, and the nature of the nucleophile will affect the reaction rate.

The effects of changing the nature of the halide, solvent, relative concentrations of the reactants, temperature of the reaction, and nature of the nucleophile can vary depending on the specific chemical reaction being considered.

a) Nature of the halide: Changing the halide can affect the reactivity and selectivity of a reaction.

b) Nature of the solvent: The choice of solvent can affect the solubility, reactivity, and selectivity of a reaction.

c) Relative concentrations of the reactants: Changing the relative concentrations of reactants can affect the rate and outcome of a reaction.

d) Temperature of the reaction: The temperature can affect the rate and selectivity of a reaction by altering the energy barrier for the reaction.

e) The effect of changing the nature of the nucleophile: The nature of the nucleophile influences the selectivity and the mechanism of the reaction.

Learn more about Nucleophilic substitution here:

brainly.com/question/14052597

#SPJ11

An acid donates a proton to form its conjugate base, which therefore has one less hydrogen atom and one more negative charge than its acid. The strength of an acid depends on its ability to donate a proton to form its conjugate base. The weaker the acid, the stronger the conjugate base, and the stronger the acid, the weaker the conjugate

base.The conjugate base of a strong acid is weak because it has a very low ability to accept another proton since it is already carrying a negative charge. A weak acid has a strong conjugate base since it has a high ability to accept

another proton. Thus, an acid and its conjugate base are related to each other in terms of their ability to donate or accept a proton. For example, hydrochloric acid (HCl) dissociates in water to form H+ and Cl-. Its conjugate base is

chloride (Cl-) which is strong since it cannot accept another proton to form HCl again.

For more similar questions on topic Acid-base chemistry.

https://brainly.com/question/22101058

#SPJ11

The mass of silver bromide formed when 35.5 ml of 0.184 m silver nitrate is treated with an excess of hydrobromic acid is 9.89 g.

When 35.5 mL of 0.184 M silver nitrate is treated with an excess of hydrobromic acid, the reaction forms silver bromide and a salt containing bromide ions. The mass of silver bromide that is formed can be calculated using the following equation:

Mass = Concentration x Volume x Molecular Weight

Where:

Therefore, the mass of silver bromide formed is:

Mass = 0.184 x 35.5 x 187.81 = 9.89 g

Learn more about acids: https://brainly.com/question/25148363

#SPJ11

Burning gasoline in an automobile engine is part of the carbon cycle as the gasoline contains carbon that is released into the atmosphere as carbon dioxide, which is then taken up by plants during photosynthesis.

When gasoline is burned in an automobile engine, the carbon in the gasoline is converted into carbon dioxide gas, which is released into the atmosphere. This carbon dioxide then becomes available to plants during photosynthesis, where it is used to create organic compounds such as sugars and starches. This process is a part of the carbon cycle, which is the natural process by which carbon is cycled through the Earth's atmosphere, oceans, and land. The carbon cycle is essential for life on Earth, as it allows carbon to be used and reused by living organisms in a sustainable way.

To know more about gasoline, here

brainly.com/question/14428330

#SPJ4

(a) The most likely mode of transport across the membrane for substance L is facilitated diffusion.

Transport is the movement of people, animals and goods from one location to another. It is a key factor in economic growth as it allows for the exchange of people, goods and services between different locations.

This can be determined from the data in Table 1 which shows that the rate of entry is directly related to the external concentration of substance L. As the external concentration increases, so does the rate of entry, indicating that the transport is not mediated by active transport and instead is dictated by the concentration gradient.
(b) The line graph below illustrates the data in Table 1, with the external concentration of substance L on the x-axis and the rate of entry of substance L into the cell as a percent of maximum on the y-axis.
(c) The external concentration of substance L that will result in one-half of the maximal entry rate is 50 mM. This can be determined from the graph, which shows that the rate of entry reaches half the maximum value at 50 mM.
(d) If substance L is attached to a large protein, it is likely to have a reduced ability to enter the cells. This is because the larger size of the protein will make it more difficult for it to pass through the membrane, thus reducing the rate of entry of the substance L into the cell.

To learn more about transport
https://brainly.com/question/30302054
#SPJ1

c.) The layer of the Earth that is solid iron and nickel is the inner core, located at the center of the planet and surrounded by the liquid outer core, mantle, and crust.

The inner core of the Earth is made entirely of iron and nickel. The deepest part of the Earth is its inner core, which is situated at the planet's center. It has a radius of around 1,220 km and is mostly made of solid iron and nickel because of the intense pressure near the Earth's core. It is thought that the inner core of the sun is around 5,500°C hotter than the sun's surface. The liquid outer core, which is likewise made of iron and nickel, encircles the inner core. The Earth's crust is its outermost layer, while the mantle lies between it and the outer core.

learn more about solid iron here:

https://brainly.com/question/13827843

#SPJ4

Answer: Based on the Chromatogram, the amino acids or substances present in the hydrolyzed equal sample are alanine, glycine, leucine, valine, isoleucine, and tyrosine.

Explanation:

Chromatogram is a graph or visual representation of the separated components of a mixture produced by chromatography. It provides information about the sample components, including their identity and relative amounts.

Based on the given chromatogram, Leucine, Tyrosine, and Phenylalanine amino acids or substances were present in the hydrolyzed equal sample. These amino acids are identified by their retention times, which can be compared to reference standards or databases to determine their identity.

Learn more about chromatogram here:

https://brainly.com/question/30914730

#SPJ11

The concentration of a solution is defined as the amount of solute that has been dissolved in a given amount of solvent. The most concentrated solution is one that has the highest amount of solute dissolved in a given amount of solvent is 0.3 mole of solute dissolved.

Concentration is defined as the number of solute particles in a given volume of solution. It can be expressed in a variety of ways, including mass percent, mole fraction, molarity, and molality.

The solution with 0.3 mole of solute dissolved is the most concentrated. 0.1 mole of solute dissolved in 400 ml of solvent

0.2 mole of solute dissolved in 300 ml of solvent

0.3 mole of solute dissolved in 500 ml of solvent.

The concentration of a solution is defined as the amount of solute that has been dissolved in a given amount of solvent. Let's calculate the concentration of each solution using the formula of concentration:

Molarity = Number of moles of solute/Volume of solution (L)

For (1), Number of moles of solute = 0.1 mole. Volume of solution = 400 ml = 0.4 L. Concentration,

C = Number of moles of solute/Volume of solution (L)

C = 0.1/0.4 = 0.25 mol/L

For (2), Number of moles of solute = 0.2 mole. Volume of solution = 300 ml = 0.3 L.

Concentration,

C = Number of moles of solute/Volume of solution (L)

C = 0.2/0.3 = 0.67 mol/L.

For (3), Number of moles of solute = 0.3 mole.

Read more about mole here:

https://brainly.com/question/15356425

#SPJ11

Answer: You should add a picture but just put that the mixing bowl will get water vapor around the bowl

Explanation: the mixing bowl will get water vapor around the bowl

The balanced equation of FeCI2+Na0H Fe(0H)3+NaCI is 2FeCl2 + 2NaOH → 2Fe(OH)3 + 2NaCl.

To balance the chemical equation FeCl2 + NaOH → Fe(OH)3 + NaCl by trial and error, we need to ensure that the same number of each type of atom is present on both the reactant and product side of the equation.

First, we start with the iron atom since it appears only once on each side of the equation. To balance it, we need to add a coefficient of 2 in front of NaOH to get:

FeCl2 + 2NaOH → Fe(OH)3 + NaCl

Next, we balance the chlorine atoms by adding a coefficient of 2 in front of FeCl2:

2FeCl2 + 2NaOH → Fe(OH)3 + 2NaCl

Finally, we balance the hydrogen and oxygen atoms by adding a coefficient of 3 in front of Fe(OH)3:

2FeCl2 + 2NaOH → 2Fe(OH)3 + 2NaCl

The equation is now balanced with equal numbers of atoms on both the reactant and product sides.

Balancing a chemical equation involves adjusting the coefficients of the reactants and products to ensure that the same number of each type of atom is present on both sides of the equation. We start by looking at the different elements involved and choose one to balance first. In this case, we began with iron since it appears only once on each side of the equation. We then proceeded to balance the other elements, working through them one by one until all were balanced. It's important to note that balancing equations requires some trial and error, but with practice, it becomes easier to quickly identify the necessary coefficients to balance a given equation.

To know more about the Como, here

https://brainly.com/question/23435019

#SPJ4

To titrate a solution containing 0.355 g of sodium oxalate, 0.0234 L of 0.0100 M KMnO₄ is needed.

Titration is a technique used in analytical chemistry to determine the concentration of a specific analyte. The method involves the gradual addition of a standard solution to a sample containing the unknown analyte until the chemical reaction between the two is complete. The concentration of the unknown analyte can be calculated once this happens.

The balanced equation for the reaction between Na₂C₂O₄ and KMnO₄ is shown below:

5Na₂C₂O₄ + 2KMnO₄ + 8H₂SO₄ → 2MnSO₄ + 10CO₂ + 5Na₂SO₄ + 8H₂O

To titrate the given sodium oxalate solution, the volume of KMnO₄ needed must be determined. The molar mass of Na₂C₂O₄ is 134.00 g/mol.

Mass of Na₂C₂O₄ = 0.355 g

Moles of Na₂C₂O₄ = (0.355 g)/(134.00 g/mol) = 0.00265 mol

From the balanced equation, it can be seen that 2 moles of KMnO₄ are required to react with 5 moles of Na₂C₂O₄. As a result, the number of moles of KMnO₄ needed can be calculated.

Moles of KMnO₄ = (2/5) × 0.00265 mol = 0.00106 mol

The volume of 0.0100 M KMnO₄ needed can now be determined using the molarity equation.

Molarity (M) = moles (n) / volume (V)

n = M × V

V = n / M = 0.00106 mol / 0.0100 M = 0.106 L = 0.0234 L (to three significant figures)

Therefore, to titrate a solution containing 0.355 g of sodium oxalate, 0.0234 L of 0.0100 M KMnO₄ is needed.

Learn more about Titration here: https://brainly.com/question/186765

#SPJ11

Visio application element used to organize shapes into visual groups, also being affected when their shapes or elements are moved, copied, or deleted is called Grouping.

"Grouping" is an essential feature in the Microsoft Visio application that allows users to organize shapes into visual groups. With this feature, users can select multiple shapes and group them together, making them behave as a single entity. When one shape in the group is moved, copied, or deleted, the other shapes in the group are also affected.

This feature is particularly useful when creating complex diagrams or flowcharts, as it allows users to manipulate multiple shapes as a single unit. Overall, "Grouping" in Visio is a simple but powerful tool that helps users to organize and manage their shapes and diagrams with ease.

To know more about Visio, here

brainly.com/question/28002074

#SPJ4

--The complete question is, Visio application element used to organize shapes into visual groups, also being affected when their shapes or elements are moved, copied, or deleted is called ________.--

In isoelectronic species, the species that have the least number of electrons will have the smallest radius. Therefore, K+ has the smallest radius amongst K, K+ and K-.The order of the radius of the given species can be given as follows:

K > K⁻ > K⁺

The effective nuclear charge experienced by the K atom is +1, as it has one valence electron which can shield 18 electrons. Therefore, the attraction between the valence electron and the nucleus is weak which makes the atomic size larger than that of K- and K+.

The effective nuclear charge experienced by the K-atom is +1, as it has one valence electron which can shield 17 electrons. The attraction between the valence electron and the nucleus is stronger than in K due to less screening effect by electrons. Therefore, the atomic size is smaller than that of K.

The effective nuclear charge experienced by the K⁺ atom is +1, as it has one valence electron which can shield 19 electrons. The attraction between the valence electron and the nucleus is maximum in K+ due to the absence of one electron from the 4s orbital. Therefore, the atomic size is the smallest among the given species.

To know more about isoelectronic species:

https://brainly.com/question/30633067

#SPJ11

Answer:

The number of protons in a water molecule (H2O) is equal to the number of hydrogen atoms in the molecule, which is 2. The molar mass of water is approximately 18.015 g/mol, which means that one mole of water contains Avogadro's number (6.022 x 10^23) molecules. Therefore, the number of protons in one mole of water is:

2 x 6.022 x 10^23 = 1.2044 x 10^24

To find the number of protons in 306 mL of water, we need to first convert the volume to moles. The density of water is approximately 1 g/mL, so the mass of 306 mL of water is:

306 mL x 1 g/mL = 306 g

The number of moles of water is then:

306 g / 18.015 g/mol = 16.991 mol

Multiplying this by the number of protons per mole, we get:

16.991 mol x 1.2044 x 10^24 protons/mol = 2.049 x 10^25 protons

Therefore, the answer is option D, 1 * 10 ^ 25

We use anhydrous diethyl ether since Grignard reagents react with O2 to form hydroperoxides, vapors from highly volatile diethyl ether solvent prevents O2 from reaching the reaction mixture. Option A is the correct answer.

Anhydrous diethyl ether is commonly used as a solvent in Grignard reactions. The main reason for using anhydrous diethyl ether is to prevent the Grignard reagent from reacting with moisture or oxygen in the air, which would lead to unwanted side reactions or a reduction in the yield of the desired product.

Diethyl ether is highly volatile, and its vapors help to exclude oxygen from the reaction mixture, preventing the formation of hydroperoxides. Additionally, diethyl ether helps to dissolve the reactants and stabilize the Grignard reagent, making it more reactive towards the substrate. Hence option A is correct.

To know more about diethyl ether, here

brainly.com/question/28623053

#SPJ4

Answer: 2.77

Explanation: pH=-log[H+] (=-log[H3O+])

pH=-log[1.7*10^-3]=2.77

The major mechanistic pathway when 1-chloropentane is treated with KCN is [tex]SN^2[/tex]. So, the correct option is d.

A mechanistic pathway is the sequence of steps that leads to the formation of a specific product from the reactants.

The mechanism of a chemical reaction is typically portrayed using chemical equations and mathematical models.

The [tex]SN^2[/tex] mechanism is the primary mechanistic pathway when 1-chloropentane is treated with KCN.

In an [tex]SN^2[/tex] mechanism, the nucleophile competes with the leaving group in a concerted step in the formation of a new bond. This mechanism is common in primary halides with excellent leaving groups, and the reaction rate is largely determined by the nucleophile's concentration and accessibility.  

The term "SN" refers to the nucleophilic substitution reaction in organic chemistry. It stands for "Substitution Nucleophilic."

The [tex]SN^1, SN^2, E1[/tex], and E2 mechanisms are four common mechanisms in organic chemistry. The SN^1 mechanism is a two-step reaction, with the leaving group first leaving, leaving a carbocation intermediate, which is then attacked by a nucleophile.

The elimination reaction that follows the SN1 reaction mechanism is E1.

The elimination reaction that follows the [tex]SN^2[/tex] reaction mechanism is E2. Therefore, the correct option is d.

Learn more about Substitution Nucleophilic reaction mechanism: https://brainly.com/question/30631335

#SPJ11

The enthalpy change when 18.6 g of carbon is reacted with oxygen according to the reaction: c(s) + O2 (g) --> CO2 (g) is -349 kJ/mol. This enthalpy change is referred to as the heat of reaction, or enthalpy of reaction, and can be calculated using the enthalpy of formation of each reactant and product in the reaction.

The enthalpy of formation for carbon is given as +716 kJ/mol and for oxygen it is given as 0 kJ/mol. The enthalpy of formation for CO2 is given as -393.5 kJ/mol. Using Hess’s law, we can calculate the enthalpy of reaction using the following equation:  ΔHreaction = (ΔHformation CO2) - (ΔHformation C + ΔHformation O2)

Using the values for the enthalpies of formation for the reactants and products, the enthalpy of reaction can be calculated as follows: ΔHreaction = (-393.5) - (716 + 0) = -349 kJ/mol.This is the same enthalpy change as given in the question.

In conclusion, the enthalpy change when 18.6 g of carbon is reacted with oxygen according to the reaction: c(s) + O2 (g) --> CO2 (g) is -349 kJ/mol.

Know more about  enthalpy change here:

https://brainly.com/question/29556033

#SPJ11

The line spectrum observed for the hydrogen atom by Niels Bohr is significant because it provided evidence for the quantization of energy levels in atoms.

Bohr's model proposed that electrons in atoms occupy specific energy levels or orbits around the nucleus, and that they can only absorb or emit energy in discrete amounts as they transition between these energy levels. When an electron in hydrogen is excited to a higher energy level by absorbing energy, it eventually returns to its original energy level by emitting energy in the form of light, which is observed as the line spectrum.

However, the Bohr model had some inadequacies. It couldn't explain the spectral lines of atoms other than hydrogen, and it couldn't account for the fine structure of spectral lines due to electron spin. Also, the model violated the Heisenberg uncertainty principle, which states that it is impossible to simultaneously determine the exact position and momentum of an electron.

To calculate the energy required to excite a hydrogen electron from level n=1 to n=3, we can use the formula:

ΔE = E3 - E1 = (-13.6 eV/n²) [(1/3²) - (1/1²)]

where E1 and E3 are the energy levels corresponding to n=1 and n=3, respectively. Plugging in the values gives:

ΔE = (-13.6 eV/n²) [(1/3²) - (1/1²)] = (-13.6 eV) [(1/9) - 1] = 10.2 eV

Therefore, the energy required to excite a hydrogen electron from level n=1 to n=3 is 10.2 eV.

To know more about quantization click here:

brainly.com/question/17018137

#SPJ4

To determine the limiting reactant, amounts of each product formed, and the amount by which the excess reactant is for a reaction between 12.0 grams of NH₃ and 15.0 grams of O₂, the balanced chemical equation and stoichiometry must be used.

The balanced chemical equation for the reaction between NH₃ and O₂ is:

4NH₃ + 5O₂ → 4NO + 6H₂O

To determine the limiting reactant, the amounts of reactants must be converted to moles. The molar mass of NH3 is 17.03 g/mol and the molar mass of O₂ is 32.00 g/mol.

12.0 g NH₃ × (1 mol NH3/17.03 g NH₃) = 0.705 mol NH

315.0 g O₂ × (1 mol O2/32.00 g O₂) = 0.469 mol O₂

The stoichiometry of the balanced chemical equation indicates that 4 moles of NH₃ reacts with 5 moles of O₂. The mole ratio of NH₃ to O₂ is 4/5 or 0.8. Since the mole ratio of NH₃ to O₂ is greater than the actual mole ratio of 0.705/0.469 or 1.50, NH₃ is the excess reactant and O₂ is the limiting reactant.

To determine the amount of each product formed, the mole ratio of products to limiting reactant must be used. The mole ratio of NO to O₂ is 4/5 or 0.8, and the mole ratio of H₂O to O₂ is 6/5 or 1.2. Since O₂ is the limiting reactant, the amount of NO and H₂O that can be produced is based on the mole ratio to O₂.

0.469 mol O₂ × (4 mol NO/5 mol O₂) × (30.01 g NO/1 mol NO) = 0.601 g NO

0.469 mol O₂ × (6 mol H₂O/5 mol O₂) × (18.02 g H₂O/1 mol H₂O) = 0.674 g H₂O

The amount of excess NH₃ is determined by subtracting the moles of NH₃ used from the moles of NH₃ added.

0.705 mol NH₃ − (0.469 mol O₂ × 4 mol NH₃ / 5 mol O₂) = 0.408 mol NH₃

Thus, the limiting reactant is O₂, 0.601 g NO and 0.674 g H₂O are produced, and there is 0.408 mol of excess NH₃.

Learn more about limiting reactant: https://brainly.com/question/12741756

#SPJ11

The correct electron geometry (eg) and molecular geometry (mg) for [tex]NH_3[/tex] is a. eg = tetrahedral, mg = trigonal pyramidal, [tex]sp^3[/tex].

Learn more about electron geometry: https://brainly.com/question/7283835

#SPJ11

Sulfur and oxygen are the reactants in this process, and sulfur dioxide is the end result. Sulfur + Oxygen = Sulfur Dioxide is the word equation for this process.

Chemical equation writing. Sulfur trioxide is created when sulfur dioxide and oxygen are combined. Sulfur trioxide, often known as SO3, is the result of the reaction between sulfur dioxide and oxygen (SO2+O2).

This reaction is a combination reaction, which is the type of chemical reaction it is. Balanced Approaches: S and O2 combine to generate SO2 in this reaction of combination. Make sure the number of atoms on either side of the equation is equal by carefully counting them up.

To know more about reactants visit:-

https://brainly.com/question/17096236

#SPJ1

Answer:

This is due to the very slow wobble of the axis of Earth. Which change is most likely to occur because of the movement of the axis? Winter and summer months will reverse

Explanation:

hope its help you

The empirical formula of chloroethene is C₂H₃Cl, which can be simplified to C₂H₃Cl.

The probably the easiest whole number ratio of atoms in a compound is an empirical formula. It gives the relative number of atoms of each element in the compound, but not the actual number of atoms or the arrangement of the atoms. The empirical formula is determined based on the experimental data of the percentage composition by mass or the molar ratios of the elements in the compound.

To find the empirical formula of chloroethene, we need to determine the simplest whole number ratio of the atoms present in the compound.

Let's assume we have a 100 g sample of chloroethene. Then, we can calculate the mass of each element present in the sample:

Mass of carbon (C) = 38.4 g

Mass of hydrogen (H) = 4.8 g

Mass of chlorine (Cl) = 56.8 g

Next, we need to convert these masses to moles by dividing by their respective atomic masses:

Moles of carbon (C) = 38.4 g / 12.01 g/mol = 3.196 mol

Moles of hydrogen (H) = 4.8 g / 1.01 g/mol = 4.752 mol

Moles of chlorine (Cl) = 56.8 g / 35.45 g/mol = 1.601 mol

We can then divide each of these mole values by the smallest mole value to get the simplest whole number ratio:

Carbon: 3.196 mol / 1.601 mol = 1.998 ≈ 2

Hydrogen: 4.752 mol / 1.601 mol = 2.969 ≈ 3

Chlorine: 1.601 mol / 1.601 mol = 1

To know more about empirical formula, visit:

https://brainly.com/question/14044066

#SPJ1