This is equivalent to the proportion of the bullet's kinetic energy to the block's kinetic energy immediately following the collision.
How is kinetic energy used? What is it?The movement of a particle, an instrument, or a collection of particles can be observed as kinetic energy, which appears to represent the force that drives motion. Things in motion that appear to use kinetic energy include people moving, baseballs being thrown, food falling from tables, and charged particles in electric fields.
Which kinetic example is the most potent?Everything in the house which moves is a manifestation of kinetic energy. The sound of a fan blowing air on a warm day, a glass breaking on the floor after sliding off the counter, or a cue ball moving on a pool table are all examples of
To know more about kinetic energy visit:
https://brainly.com/question/26472013
#SPJ4
the rope-and-pulley system of negligible mass shown above supports a block of weight w that is at rest. if the tension throughout the rope is uniform, what is the reading on the spring scale?
The rope-and-pulley system of negligible mass shown above supports a block of weight w that is at rest. if the tension throughout the rope is uniform.
To determine the reading on the spring scale, we can apply Newton's Second Law of Motion to the block of weight w. The net force on the block is equal to the block's mass times its acceleration: F net = ma The only force acting on the block is the force of gravity, which is equal to the weight of the block: F net = F gravity = w The acceleration of the block is zero, since it is at rest: w = ma = m * 0 . This equation tells us that the force of gravity on the block is zero, which means that the block is in equilibrium and the tension in the rope is zero. Therefore, the reading on the spring scale is zero.
to know more about tension
https://brainly.com/question/29763438
#SPJ4
Answer:
W/2
Explanation:
The original question does not include a diagram which is necessary for answering the question.
The diagram shows a spring scale attached to the ceiling. Below the spring, 2 pulleys are attached, holding the block at 2 separate points. As a result, there will be 4 ropes (2 attached to the spring scale, and 2 to the ceiling).
Because the tension is dispersed evenly among the 4 points, we can say that the scale will only read half the weight as the rest of the tension will be held by the ceiling.
Therefore, the spring scale will read W/2
I wish that I can upload the diagram, but unfortunately, I cannot. I assume that you will have access to the diagram.
Hope this helped!
the student wishes to repeat the using different slit separations. what is the smallest slit separation, in micrometers, that produces a first-order maximum?
The spacing is m at its smallest (micron) is the least distance between two slits required to create a second-order maximum for all visible light—that is, a second-order maximum for all visible wavelengths. The spacing is m at its smallest (micron).
How far apart are the slits from one another?In Young's double slit experiment, the slits are separated by 0.1 mm, the light employed is 600 nm in wavelength, and the interference pattern is seen on a screen 1 m from the slits.
Due to its dependence on L, the spacings between various fringes get smaller as the distance between the slits gets more. The distance between various fringes grows as the light's wavelength rises.
learn more about Young's double slit refer
https://brainly.com/question/23555834
#SPJ4
in an experiment, block is given an initial speed toward block , which is initially at rest. the blocks are on a track that has a motion detector set up, as shown above. when the two blocks collide, there is a completely inelastic collision and the blocks move together with speed . the blocks were both placed on a balance, and it is determined that they have the same mass. the experiment is repeated for four different initial speeds, and the data are shown in the chart below. it appears that the resulting data are not accurate. which measurement most likely produced errors in the data seen in the chart below?
The results that we get from the experiment is accurate within the limits of experimental error. Option E
What is true about the experiment?We know that an experiment is the way by which we can be able to establish a cause and effect relationship. In this case, we can see that there is an inelastic collision that has occurred between the two blocks that have collided in the instance that we can see here.
Looking at the set up of the experiment, it is clear that the block is given an initial speed toward block , which is initially at rest. the blocks are on a track that has a motion detector set up, as shown above.
All of the set up is okay based on the way that such an experiment ought to be arranged to enable us to get a very accurate result out of the work that has been done here.
Learn more about experiment:https://brainly.com/question/11256472
#SPJ1
A student wants to make a simple model of the solar system to help him compare how long it would take for a spaceship to travel between different planets.
Which of the following things is essential for him to do in order to think about how long it would take?
this are the opions
He must make sure that the model of each planet looks like the planet it represents, but he does not need to accurately represent the relative distances between the planets because the most important thing is that models look like the thing they are modeling.
He must accurately represent the relative distances between the planets, but he does not need to make sure that the model of each planet looks like the planet it represents because only the relevant aspects of the thing being modeled need to be modeled accurately.
He must accurately represent the relative distances between the planets and also make sure that the model of each planet looks like the planet it represents, because a model should be as much like the thing being modeled as possible.
He does not need to accurately represent the relative distances between the planets, and he does not need to make sure that the model of each planet looks like the planet it represents, because there are always some differences between a model and the thing being modeled.
Answer:
To make a simple model of the solar system that can be used to compare the time it would take for a spaceship to travel between different planets, the student must accurately represent the relative distances between the planets. This is because the time it would take for a spaceship to travel between two planets depends on the distance between those planets, so accurately representing the distances between the planets is essential for thinking about how long it would take for a spaceship to travel between them.
It is not necessary for the student to make sure that the model of each planet looks like the planet it represents, although this may help make the model more understandable. The most important thing is that the model accurately represents the relative distances between the planets.
In summary, the student must accurately represent the relative distances between the planets in order to think about how long it would take for a spaceship to travel between different planets in the solar system.
40 POINTS HELPP
The Anthropocene is still considered an informal designation because International Union of Geological Sciences (IUGS), the international organization that names and defines epochs, has not officially designated it an epoch. Their criteria for the designation of a new epoch are that there should be evidence of human impacts and change in the rock record.
What activities and impact could humans be responsible for that might be reflected in the rock record and thus determine the beginning of the Anthropocene?
(Minimum of two sentences please)
Answer:
One example of an activity that could be reflected in the rock record and contribute to the beginning of the Anthropocene is the widespread use of fossil fuels, which has led to an increase in atmospheric carbon dioxide concentrations and a corresponding shift in the Earth's climate. Another potential contributor to the Anthropocene is the proliferation of plastic and other synthetic materials, which are becoming ubiquitous in the geologic record and may persist for thousands of years.
Use the information and table to answer the following question! A skydiver dives from an airplane. air resistance is measured each second following the skydiver’s jump.
Time After Jump Weight Air Resistance
(seconds) Newtons (N) Newtons (N)
1 seconds 500N 200N
2 seconds 500N 300N
3 seconds 500N 400N
4 seconds 500N 500N
Which statement BEST identifies the skydiver's speed at each second?
a. The skydiver has the slowest speed at 2 seconds
b. The skydiver has the fastest speed at 4 seconds
c. The skydiver has the sloweat speed 1 second
d. The skydiver has the fastest speed at 3 seconds
The skydiver has the fastest speed at 4 seconds, and the correct statement is (b) "The skydiver has the fastest speed at 4 seconds".
To determine the skydiver's speed at each second, we need to consider the forces acting on the skydiver. In this case, the forces acting on the skydiver are the weight of the skydiver and the air resistance. The weight of the skydiver is constant at 500 N, while the air resistance increases with time.
According to Newton's second law of motion, the acceleration of an object is equal to the net force acting on it divided by its mass. In this case, the mass of the skydiver is not given, so we cannot calculate the acceleration directly.
Speed is the rate of change of displacement over time. In this case, the displacement of the skydiver is not given, so we cannot calculate the speed directly. However, we can use the information provided to determine the skydiver's speed at each second.
From the table, we can see that the air resistance increases with time, reaching a maximum of 500 N at 4 seconds. This means that the net force acting on the skydiver is greatest at 4 seconds, which would correspond to the highest acceleration and the fastest speed.
Learn more about Speed and Mass here:
https://brainly.com/question/8052659
#SPJ4
why the force needed to keep an object traveling in the same size circle is larger the faster the object is going.
A body's direction constantly shifts as it circles around. This shift in direction causes a change in velocity, which causes the motion to accelerate. We know from Newton's First Law that an external force is necessary to produce acceleration. Therefore, a force is required to maintain the body's circular motion.
What force must be applied to maintain an object's motion in a circle?A net force called a centripetal force acts on an object to keep it moving in a circular motion.
According to Newton's first law, unless a force acts on an object, it will either stay in place or continue to move at a constant speed. Inertia is the term for this notion. An object has more inertia the heavier it is (or the more mass it has). Due to their greater inertia, heavy objects are more difficult to move than light ones.
To know more about force visit:
https://brainly.com/question/13191643
#SPJ4
Calculate the energy transferred by an appliance using mains electricity (230v) if the charge is 150c. Give your answer in kilojoules.
The energy transferred by an appliance using mains electricity is 34500 Joule.
What is energy?
In physics, energy is the ability to perform work. It could exist in several different forms, such as potential, kinetic, thermal, electrical, chemical, radioactive, etc. Additionally, there is heat and work, which is energy being transferred from one body to another. Energy is always assigned based on its nature once it has been transmitted.
Given that: charge of the particle: Q = 150 C.
Potential difference applied: V = 230 V.
Hence, the potential energy of the particle: E = QV
= 150 × 230 Joule
= 34500 Joule.
Learn more about energy here:
https://brainly.com/question/1932868
#SPJ1
A 100 kg car starts from 20 m/s and speeds up to 41 m/s in 7 seconds. Determine the car's
acceleration.
Answer: 3 m/s^2
Explanation:
Acceleration equals change in velocity (speed) divided by total time.
a = (v2-v1)/t
a = (41 m/s - 20 m/s) / 7 s
a = 3 m/s^2
Mass is irrelevant in this question.
questions 10-11 refer to a ball that is tossed straight up from the surface of a small, spherical asteroid with no atmosphere. the ball rises to a height equal to the asteroid's radius and then falls straight down toward the surface of the asteroid. 10. what forces, if any, act on the ball while it is on the way up?
Only a decreasing gravitational force that acts downward will apply on the ball that is tossed straight up from the surface of a small, spherical asteroid with no atmosphere.
What is gravitational force?All physical things with mass are drawn to the gravitational force, which can be thought of as an attracting force. It is the known natural force that is by far the weakest.The gravitational force, which is what pushes mass-containing objects toward one another. We frequently consider the pull of gravity from the Earth. Your body is kept on the ground by this force. However, all mass-bearing objects are pulled toward each other by gravity.
Hence,
Only a decreasing gravitational force that acts downward will apply on the ball that is tossed straight up from the surface of a small, spherical asteroid with no atmosphere. The ball rises to a height equal to the asteroid's radius and then falls straight down toward the surface of the asteroid.
To know more about gravitational force visit
https://brainly.com/question/3009841
#SPJ4
which type of wave has a wave perpendicular to the disturbance?responses surface surface longitudinal longitudinal mechanical mechanical transverse
The disruption of a transverse wave propagates perpendicular to the direction of propagation.
Depending on the type of motion they experience, mechanical waves can either be transverse or longitudinal. It should be emphasized that transverse and longitudinal waves can both have periodic behavior.
Transverse wave: what is it?
An oscillating wave that moves in the opposite direction of its oscillations is referred to as a transverse wave in physics. On the other hand, a longitudinal wave travels in the direction of its oscillations. Water waves are transverse waves.
A transverse wave is what sort of wave?
Transverse waves include phenomena like string vibrations and sea surface ripples. The slinky may be swung horizontally up and down to produce a transverse wave. A longitudinal wave's particles are scattered perpendicular to the direction that the wave is moving.
To know more about Transverse wave visit:
https://brainly.com/question/13863548
#SPJ4
What is the relationship between the net force applied to an object and the work done on that object?
Answer:
work done is directly proportional to the net force acting on the object.
Explanation:
work done = Force × displacement
what is the current through the heating element of an electric toaster oven if the heater has a resistance of 5 ohms and it is connected to 120 volts?
Answer:
24 A
Explanation:
Ohm's Law: V = IR, so I = V/R
I = 120V/5Ω = 24 A
A heavy piece of hanging sculpture is suspended by a 90 cm long 5.0 g steel wire. When the wind blows hard, the wire hums at its fundamental frequency of 95 Hz.What is the mass of the sculpture?
According to the given statement 16.7kg is the mass of the sculpture.
What is a fundamental frequency in physics?The lowest frequency that could be produced by a particular instrument is known as the fundamental frequency. The fundamental frequency is also known as the instrument's first harmonic.
Briefing:Use the string's tautness' fundamental frequency as a formula.
f = (1/2L)*√(T/μ) .... (Eqn1)
Where
f= frequency in Hertz =80Hz
T = The string's tension equals Mg.
M is a symbol for the substance's mass (sculpture)=?
g= 9.8m/s^2
L= Length of the string=90cm=0.9m
μ= string length divided by mass gives the string's density.
mass of string =5g=0.005kg
L=0.9m
μ=0.005/0.9 = 0.0056kg/m
Using (Eqn1)
95= 1/(2*0.9) √(T/0.0056)
171= √(T/0.0056)
Square both sides
29241= T/0.0056
T= 163.74 N
Recall that T =Mg
163.74= M * 9.8
M=163.74/9.8
M= 16.7kg
Consequently, the sculpture weighs 16.7kg.
To know more about Fundamental frequency visit:
https://brainly.com/question/29264927
#SPJ4
which is a major difference between what we've seen in discovered exoplanets and our own solar system?
The major difference between what we've seen in discovered exoplanets and our own solar system is that extrasolar planet orbits tend to be closer and more eccentric than in our Solar System.
Exoplanet:
Any planet outside of our solar system is an exoplanet. The majority of exoplanets orbit other stars, while rogue planets—free-floating exoplanets that are unattached to any star—orbit the galactic center.
All of the planets in our solar system orbit around the Sun. Planets that orbit around other stars are called exoplanets.
Exoplanets are very hard to see directly with telescopes. They are hidden by the bright glare of the stars they orbit.
Learn more about exoplanets here
https://brainly.com/question/1514493
#SPJ4
if we want to see what galaxies looked like at a time close to the beginning of the universe, where should we look?
Answer: 4 billion years ago
Explanation:
terference is a property of a. light waves. b. sound waves. c. water waves. d. all of these e. none of these
When two Polaroids' axes are parallel, light cannot flow between them. a 45° angle between them. Parallelc. Perpendiculard. a pair of these. each of these 45.
An entrepreneur suggests providing polarised background music for offices and allowing those who would rather not hear it to do so by using polarising earbuds.Mechanical vibrations in the form of sound waves are transmitted from an item to the ear. These vibrations may arise from a person's voice, a musical instrument, thunder, or an earthquake and can be audible or inaudible. By connecting a pair of headphones to the speakers and turning on the sound, a sound wave can be heard.
Light is electromagnetic radiation, and light is electromagnetic radiation.
To know more about electromagnetic , visit to https://brainly.com/question/17057080
#SPJ4
a 7.00-kg mass is hung from the bottom end of a vertical spring fastened to an overhead beam. the object is set into vertical oscillations having a period of 2.60 seconds. what is the force constant of the spring?
The force constant of the spring is 42.1 m.
What is force?Force is a physical quantity that is related to the interaction between two objects. It is a vector quantity, meaning it has both magnitude and direction. Force can be thought of as a push or a pull between two objects. When one object exerts force on another object, the second object experiences an equal and opposite reaction force. Some of the most common examples of force include friction, gravity, electric fields, and magnetism. Force is a key concept in physics, as it is often used to explain the motion of objects and the behavior of physical systems.
The force constant, or spring constant, of the spring can be calculated using the equation:
k = (4π^2m)/T^2. In this equation, m is the mass of the object and T is the period of oscillation.
Therefore, the force constant of the spring is
k = (4π^2*7.00kg)/(2.60s)^2 = 42.1 N/m.
This means that if a 1 N force is applied to the spring, it will stretch by 42.1 m.
To know more about force click-
https://brainly.com/question/12785175
#SPJ4
consider the harmonic oscillator with dynamics written as with parameters . if the initial position and velocity of the oscillator are given by , what is the position of the oscillator at seconds?
The position of the oscillator at seconds is ( A cos ( ω t + ϕ ) where A is the amplitude and ϕ is the initial phase and f = 1/T = ω/2π.
What is the mean position in oscillation?Equilibrium or Mean Position: It is a state in which the body is in when there is no net force pushing against it. When a particle is oscillating, it is in its phase This is a representation of the particle's vibrational state at a particular instant.
Is the oscillation period measured in seconds?The period of an oscillating system is the length of time it takes for a cycle to be completed. A system's period is a time measurement, and in physics, it's typically represented by the capital letter T. Although seconds are the most common, period is measured in time units relevant to that system.
What is the equation for an oscillating period?Time, or T, is the oscillation's period, hence ωT = 2π or T = 2π/ω. The formula f = 1/T = ω/2π. gives the reciprocal of the period, or the frequency f, in oscillations per second.
To know more about time period click:
https://brainly.com/question/26146342
#SPJ4
FILL IN THE BLANKS
12) When two objects interact through the gravitational force between them, the more massive one has a lower ___________ than the less massive object.
13) A student walks 20 m north, 10 m south, and 3 m north. To have a displacement of 0 m,
the student should walk _____m toward the _____.
14) Jennifer's thinking is not supported by Newton's _______ law of motion because during the collision, the force on her bumper car must be _______ in size and _______ in direction to the force on her father's bumper car.
12. When two objects interact through the gravitational force between them, the more massive one has a lower acceleration than the less massive object.
13. A student walks 20 m north, 10 m south, and 3 m north. To have a displacement of 0 m, the student should walk 13m toward the south.
14. Jennifer's thinking is not supported by Newton's third law of motion because during the collision, the force on her bumper car must be equal in size and opposite in direction to the force on her father's bumper car.
a uniform thin rod of length 0.50 m and mass 4.0 kg can rotate in a horizontal plane about its center. a 3.0 gram bullet hits the end of the rod (initially at rest) at an angle of 60 degrees and imbeds in the rod. if the angular speed of the rod is 10. rad/s after the bullet strikes, what is the speed of the bullet before it strikes the rod?
The speed of the bullet before it strikes the rod is 67 m/s. To determine the speed of the bullet before it strikes the rod, we need to consider the conservation of angular momentum.
The moment of inertia of a thin rod about its center is given by the following formula:
I = (1/3) * m * L^2where I is the moment of inertia, m is the mass of the rod, and L is the length of the rod.
Substituting the values given in the problem, we find that the moment of inertia of the rod is
(1/3) * 4.0 kg * (0.50 m)^2 = 0.67 kg*m^2.In this case, the bullet strikes the rod, transferring some of its linear momentum to the rod in the form of angular momentum. The change in angular momentum of the rod is equal to the angular momentum of the bullet.
We can use the conservation of angular momentum to write the following equation:
I1 * w1 + J = I2 * w2where I1 is the initial moment of inertia of the rod, w1 is the initial angular velocity of the rod, J is the angular momentum of the bullet, I2 is the final moment of inertia of the rod, and w2 is the final angular velocity of the rod.
Since the initial angular velocity of the rod is zero, we can simplify the equation as follows:
J = I2 * w2
Substituting the values given in the problem, we find that the angular momentum of the bullet is
0.67 kgm^2 * 10 rad/s = 6.7 kgm^2/s.To determine the speed of the bullet before it strikes the rod, we need to consider the bullet's mass and the angle at which it strikes the rod. The mass of the bullet is given as 3.0 grams, which is equivalent to 0.003 kg. The angle at which the bullet strikes the rod is given as 60 degrees.
We can use the following formula to calculate the speed of the bullet before it strikes the rod:
v = (J/m) * sin(theta)Substituting the values given in the problem, we find that the speed of the bullet before it strikes the rod is (6.7 kg*m^2/s / 0.003 kg) * sin(60 degrees) = 67 m/s. This is the final answer.
Learn more about Angular Momentum here:
https://brainly.com/question/13822610
#SPJ4
Which choice below explains what is happening in a liquid as it turns into a gas?
a. The particles speed up and spread apart
b. The particles speed up and come closer together
c. The particles slow down and spread apart
d. The particles slow down and come closer together
Answer:
a
Explanation:
As you add thermal energy the particles spread apart and are moving faster ..... a certain volume of water produces a much larger volume of steam as energy is added.....that is how steam engines work !
describe how energy travels from the nuclear core of the sun to the atmosphere. in your answer, include the name of each layer and describe how energy moves through the layer.
Energy travels from the nuclear core of the Sun to the atmosphere through a process called thermal radiation. Thermal radiation is the emission of electromagnetic waves from a body due to its temperature.
The Sun is composed of several layers, including the core, the radiative zone, and the convective zone. Energy travels through these layers as follows:
1. Core: The core is the innermost layer of the Sun and is where nuclear fusion reactions take place. In these reactions, hydrogen atoms are combined to form helium, releasing a large amount of energy in the process. This energy is in the form of electromagnetic radiation, including visible light and ultraviolet radiation.
2. Radiative zone: The radiative zone is the layer of the Sun just outside the core. In this layer, the energy released in the core is transported outward through the process of thermal radiation. Photons, or particles of light, are emitted from the surface of the core and travel through the radiative zone, gradually losing energy as they move outward.
3. Convective zone: The convective zone is the outer layer of the Sun. In this layer, the energy transported by thermal radiation is not enough to sustain the temperature of the Sun, so the energy is transferred through the process of convection. In convection, hot gas rises and cool gas sinks, resulting in the transfer of heat from the interior of the Sun to the surface.
Overall, energy travels from the nuclear core of the Sun to the atmosphere through the process of thermal radiation and convection. These processes help to transport energy from the core of the Sun to the surface, where it is emitted into space as electromagnetic radiation.
Learn more about Thermal Radiation here:
https://brainly.com/question/14341157
#SPJ4
If the forces exerted on a 2-kg object are 50 N east and 30 N west, what is the object's acceleration?
If the forces exerted on a 2-kg object are 50 N east and 30 N west, the object's acceleration is 10 m/s².
What is acceleration?Acceleration is defined as the speed at which an object's velocity changes over time. They are vector quantities, accelerations. The direction of the net force acting on an object determines the direction of its acceleration.
To calculate acceleration we use formula
F = m x a
Given m = 2 kg
Net force = 50 N - 30 N
= 20 N
a = F / m
a = 20 N / 2 kg
a = 10 m/s²
Thus, if the forces exerted on a 2-kg object are 50 N east and 30 N west, the object's acceleration is 10 m/s².
To learn more about acceleration, refer to the link below:
https://brainly.com/question/12550364
#SPJ1
if a planet (or asteroid) orbited the sun at three times the distance of mars, its orbital speed would be
If a planet (or asteroid) orbited the sun at three times the distance of mars, its orbital speed would be about one-third to two-thirds the speed of Mars' orbit .
What is meant by solar system?The Sun, our star, and everything gravitationally connected to it, including the planets Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune, dwarf planets like Pluto, dozens of moons, and Our solar system is made up of millions of asteroids, comets, and meteoroids.
The Solar System is made up of the Sun, eight planets, and a variety of other celestial bodies. These celestial bodies and planets are drawn to the Sun and circle around it. Our solar system is made up of the Sun, a common star, Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune.
The complete question is : Now, let's turn our attention to rotation curves for orbiting masses which are not rigidly held together like the points on a merry-go-round. The Rotation Curve of the Solar System animation shows the orbits of Mercury, Venus, Earth, and Mars. Click on each of the orbits, and watch the corresponding points appear on the graph below it. If a planet (or asteroid) orbited the Sun at three times the distance of Mars, its orbital speed would be __________.
To learn more about solar system refer to :
https://brainly.com/question/1286910
#SPJ4
calculate the eccentricity for the planet if the distance between foci is 5,000,000 km and the distance of the major axis is 299,000,000 km.
The eccentricity for the planet if the distance between foci is 5,000,000 km and the distance of the major axis is 299,000,000 km is 0.0167.
Calculation:
The eccentricity of an elliptical orbit is defined by the ratio:
e = c/a
where:
c is the distance from the center of the ellipse to either focus
e = eccentricity
a = positive for an elliptical orbit
The eccentricity can be calculated as follows:
e = 5 × 10⁶km ÷ 299 × 10⁶km
e = 0.0167
Eccentricity is also the ratio of the semimajor axis a to the distance d from the center to the directrix. Eccentricity can be represented by flattening. Eccentricity can be defined by how much a conic actually deviates from the shape of a circle.
Learn more about The eccentricity here:- https://brainly.com/question/8047982
#SPJ4
gravel is being dumped from a conveyor belt at a rate of cubic feet per minute. it forms a pile in the shape of a right circular cone whose base diameter and height are always the same. how fast is the height of the pile increasing when the pile is feet high? recall that the volume of a right circular cone with height and radius of the base is given by .
The fast is the height of the pile increasing when the pile is feet high 0.1989 ft/min.
Calculation:
Here given the rate of change in volume DV/DT = 40 actions and we need the rate of change in height when height h = 16.
Putting all values.
40 = π/4 x (16)² x DV/DT
= DV/DT= 40 x 4/ 1×16×16
0.1989 ft/min.
Rate of change in height when height is 16 H is equal to 0.1989 ft/min.
The goal is to get a text from as many modalities as possible so that models trained on The Pile have broader generalization capabilities. For stakes, experts believe it comes from the Latin word pira. Pila loosely translates to the ball. If you've ever seen inflamed hemorrhoid, you'll understand this moniker better. Many hemorrhoids actually look like small round spheres.
Learn more about The pile here:- https://brainly.com/question/14355792
#SPJ4
suppose a woman does 550 j of work and 9800 j of heat transfer occurs into the environment in the process. (a) what is the decrease in her internal energy (in kcal), assuming no change in temperature or consumption of food? (that is, there is no other energy transfer.) -10350 kcal (b) what is her efficiency (in percent)? %
W = -500 J is the work, which is why it's negative because a woman is doing it.
Briefing
The heat transfer into the system,
Q = 9500 J, makes it positive.
(a) Heat and work are added to determine the change in internal energy, which is:
ΔU = Q+W
We replace with:
ΔU = 9500 J-500 J
ΔU = 9000 J\s(b) (b) The quantity of useful work completed given a total energy supply is now what is generally referred to as an efficiency. From this, we may divide the woman's labour by the shift in internal energy, giving us
= 500 j / 9000 j.
We get:
ϵ = 0.0556~ 5.56%
Learn to about Energy
Visit:
https://brainly.com/question/11399976
#SPJ4
1.
KNOW the UNITS!!!!!! SHOW YOUR WORK
What is the net force exerted on a 150.0kg race-car driver while the race car is accelerating from 0 to 58.7m/s i
3.50s?
Answer:
2515.7N
Explanation:
First step is to find the acceleration:
U = 0 and V =58.7 m/s
a = (V-U)/t
where, t = 3.5s
a = 58.7/3.5
so, in order to find the net force,
F= ma
= 150kg × 58.7/3.5
= 2515.7 N
true or faule because only one path exists for the current to flow through a series circuit, it must flow through each resistor in the circuit.
In a series circuit, there is only one path for the current to go, hence each resistor in the circuit must conduct current. For series-connected resistors, this assertion is accurate.
Why does a series circuit just have one path for current?This is thus because a series circuit only has one path for current to move along. Since conductors carry electric charge, the rate of flow at any point in the circuit at any given instant must be equal.
What takes place when a circuit path is damaged?Current will stop flowing in the circuit if any section of this path is damaged. Any series-connected set of parts in a circuit that doesn't have any junctions must all have the same amount of current flowing through them. Devices are connected in a parallel circuit so that current can go along more than one closed path.
To learn more about current visit:
brainly.com/question/23323183
#SPJ4
