A car is moving at 30km/h. What is its speed in m/s? Give your answer to 2 significant figures.

Answer:

The time of motion is 333.3 s

The angular acceleration is -0.0045 rad/s²

Explanation:

Given;

angular distance of the flywheel, θ = 40 rev

initial angular speed, [tex]\omega_i[/tex] = 1.5 rad/s

When the wheel comes to rest, the final angular speed, [tex]\omega_f[/tex] = 0

The angular acceleration is calculated as follows;

[tex]\omega_f^2 = \omega_i^2 + 2\alpha \theta \\\\0 = (1.5 \ rad/s)^2 + 2\alpha (40 \ rev\times \frac{2\pi \ rad}{1 \ rev} )\\\\0 = 2.25 + 160\pi \alpha\\\\160\pi \alpha = - 2.25\\\\\alpha = -\frac{2.25 }{160\pi} \\\\\alpha = -0.0045 \ rad/s^2[/tex]

The time of motion is calculated as;

[tex]\omega_f = \omega _i + \alpha t\\\\0 = 1.5 + (-0.0045t)\\\\0 = 1.5 - 0.0045t\\\\0.0045t = 1.5\\\\t = \frac{1.5}{0.0045} = 333.3 \ s[/tex]

Answer:

0.0366 m

Explanation:

We are given;

Current density; J = 540 A/cm² = 540 × 10⁴ m

Current; I = 0.57 A

Now, formula for current density is;

J = I/A

Where A is area = πr²

Thus;

J = I/(πr²)

r = √(I/(Jπ))

r = √(0.57/(540π))

r = 0.0183 m

Diameter = 2 × radius

Diameter = 2 × 0.0183

Diameter = 0.0366 m

Answer:

The height balls rise above the collision point, is approximately 7.37 meters

Explanation:

The given parameters just before the collision are;

The mass, m₁ and velocity, v₁ of the ball moving upward are;

m₁ = 3.0 kg, v₁ = 22 m/s

The mass, m₂ and velocity, v₂ of the ball moving downward are;

m₂ = 1.3 kg, v₂ = -11 m/s (downward motion)

The type of collision = Inelastic collision

We note that the momentum is conserved for inelastic collision

Let, [tex]v_f[/tex], represent the final velocity of the balls after collision, we have;

∴ Total initial momentum = Total final momentum

m₁·v₁ + m₂·v₂ = (m₁ + m₂)·[tex]v_f[/tex]

Therefore, we get;

m₁·v₁ + m₂·v₂ = 3.0 kg × 22 m/s + 1.3 kg × (-11) m/s = 51.7 kg·m/s

(m₁ + m₂)·[tex]v_f[/tex] = (3.0 kg + 1.3 kg) ×

∴ 51.7 kg·m/s = 4.3 kg × [tex]v_f[/tex]

[tex]v_f[/tex] = (51.7 kg·m/s)/4.3 kg ≈ 12.023 m/s

The final velocity, [tex]v_f[/tex] ≈ 12.023 m/s

The maximum height, h, the combined balls will rise from the point of collision, moving upward at a velocity of [tex]v_f[/tex] ≈ 12.023 m/s, is given from the kinetic equation of motion, v² = u² - 2·g·h, as found follows

At maximum height, we have;

[tex]h_{max} = \dfrac{v_f^2}{2 \cdot g }[/tex]

Therefore;

[tex]h_{max} \approx \dfrac{12.023^2}{2 \times 9.81 } \approx 7.37[/tex]

The height the combined two balls of putty rise above the collision point, [tex]h_{max}[/tex] ≈ 7.37 m.

[tex]\bold{{Answer}}[/tex]

O physical, chemical, respectively

please buddy correct me if im wrong

The ability of a metal to react with air and water is a  chemical, chemical, respectively property

A chemical change occur when the substance's composition is changed or when bonds are broken and new ones are forms a chemical change occur .

When a metal burn in air or react with air it form metal oxide and when metal react with water it forms oxides or hydroxides and release hydrogen gas . In both the cases change in composition is taking place . hence , bot are chemical reactions

correct answer is O chemical, chemical, respectively

learn more about chemical change

https://brainly.com/question/23693316?referrer=searchResults

#SPJ3

Answer:

you have written the definition so what are you asking

Answer:200 Mpa

Explanation:

Given that diameter of cylinder = d = 1-25cm = 1.25 100 =0.0125m

Load or mass = m = Stress 0 = ? 2500kg

Solution: Formula N = F A

Area of Cross-section of cylinder = A=πr2 A = π(d/2) 2

= π(d2/4)

=(3.14)(0.0125)2/4

A = 1.226x10-4

F ・ mg = = F A 24500 2500 x 9.8 = 24500 N

1-226x10-4

1998 36 867.9

= 200 x 106 Pa

= 200 MPa

*Hope it helps you*

Good luck

Answer:

In a parallel combination of electrical appliances total electric power will increase

Answer is A it will increase

Answer:

There is no significant energy loss in the total internal reflection and the reflected ray has entire light wave energy so that a brighter image is formed, but some energy in the plane mirror is absorbed inside and thus energy loss.

Explanation:

Advantages

Answer:

Increased

Explanation:

kVp is an acronym for kilovoltage peak, and it determines the strength x-ray beam strength, and the quality of the beam, it is a measure of the highest that the x-ray machine produces. A 60 kVp x-ray will produce photons with a maximum energy of 60 kilovolts while a 70 kVp will produce photons having 70 kilovolts as the maximum energy

Therefore, a high kVp exposure will result in scattered photon that is of increased energy compared with a lower kVp exposure.

Answer:

C voltage

Explanation:

Voltage is the change in electric potential so basically current flows from high potential to low potential due to voltage.

Answer:

A

Explanation:

We know that impulse(J) is the force times the change in time OR mass times the change in velocity. Because we're given mass and a final and initial velocity, we'll use the second option written as:

mΔv=J

Since Δ means change in, and Δv= vf-vi, we subtract 10 m/s from 15 m/s to get 5 m/s for Δv.  

Now plugging in Δv and m(1,200 kg)

1,200 kg * 5 m/s =J

6000 kg* m/s = J

The amount of solar radiation received by Earth from the sun, known as insolation, is greatest when the sun is directly overhead a location.

The amount of solar radiation received by Earth from the sun is known as insolation, solar insolation is greatest when the sun is directly overhead a location.

The energy transferred from the Sun in the form of electromagnetic radiation is known as the solar energy

It can be used as thermal energy for various life purposes as well as for electricity conversion with the help of solar photovoltaic cells

The ratio of total electrical energy generated by a solar photovoltaic panel to its total thermal energy is known as solar energy efficiency. The solar panel's area and design have an impact on how energy-efficient it is.

Thus, the term "insolation" refers to the amount of solar radiation that Earth receives from the sun. Solar insolation is highest when the sun is directly overhead a location.

Learn more about solar energy from here, refer to the link;

brainly.com/question/9704099

#SPJ2

Answer:

adaptive optics

Explanation:

simple

"Energy" is the ability to do work.

"Work" is the process of using energy.

Answer:

80%

Explanation:

Energy Input: 360 J

Energy Output: 288 J

e= 288/360 × 100

e= 80%

Alternatively,

e= W(total)/ Q (in)

e= 288/360

e=0.8×100

e=80%

Answer:

1-The liquid pressure is same at all points lying on the same horizontal plane in a stationary liquid.

2-The liquid pressure at a point inside the liquid is same in all directions.

3-The liquid pressure at a point inside the liquid is directly proportional to the depth of that point from the free surface of liquid.

4-The pressure of liquid at same depth is different for different liquids. It is directly proportional to density of liquid. That is, for same depth the liquid pressure is larger for liquid of larger density.

Explanation:

Answer:

Explanation:

The formula for this is

[tex]F_g=\frac{Gm_1m_2}{r^2}[/tex] where F is the gravitational force, G is the gravitational constant, m1 is the mass of one object and m2 is the mass of the other object. We are looking for r, the distance between the centers of their masses.

Filling in:

[tex]7.5*10^{-8}=\frac{6.67*10^{-11}(90.0)(30.0)}{r^2}[/tex] and moving things around to solve for r:

[tex]r=\sqrt{\frac{6.67*10^{-11}(90.0)(30.0)}{7.5*10^{-8}} }[/tex] Doing all that and rounding to the 3 sig fig's you need gives us a distance of 1.55 m

Answer:

Some current is lost.

Explanation:

Change occur in the current when the circuit was initially closed because in a closed circuit the current moves from the start towards the end of the circuit through various resistors. There is heat produced in the wire when the current flows through the circuit. Due to this heat, some of the current is lost during on his own way. Capacitor is a device used to store an electric charge, having of one or more pairs of conductors separated by an insulator. while on the other hand, electric current is a stream of charged particles, such as electrons moving through conductor or space.

Answer:

The entire rainbow of radiation observable to the human eye only makes up a tiny portion of the electromagnetic spectrum – about 0.0035 percent. This range of wavelengths is known as visible light.

Explanation:

Please Mark me brainliest

Answer:

Physical Changes :- The substance in which no new substance is formed are called physical changes.

The molecular composition of the substance are totally same.

For example :- Crushing a mineral into powder.

Answer:

answer is E

Explanation:

Answer:

It is practiced around the world .

The statement, that is, food irradiation leaves food mildly radioactive is not true.  

• A technology, which uses ionizing radiation to improve safety and extend the shelf life of foods by eliminating and reducing insects and microbes is known as food irradiation.  

• Irradiation is used in canning fruits and vegetables and pasteurizing milk to make food safer for consumption.  

• Irradiation does not compromise nutritional quality, makes food radioactive, or change the texture, text, or appearance of food. The effect of irradiation is so minimal that it is not easy to identify that whether the food is irradiated.  

• Food irradiation has been approved in over forty countries and is almost practiced globally.  

Thus, the statement, that is, it leaves food mildly radioactive is incorrect.  

To know more about:

https://brainly.com/question/19586033

Answer:

150 kJ

Explanation:

Applying,

ΔH = Energy level of Product(E') - Energy level of reactant(E)

Where ΔH = enthalpy change, E' and E = energy level of the product and the reactant respectively

ΔH = E'-E............. Equation 1

From the diagram,

Given: E' = 200 kJ, E = 50 kJ

Substitute these values into equation 1

ΔH = 200-50

ΔH = 150 kJ

Hence the enthalpy change for the reaction is 150 kJ

Answer:

True

Explanation:

True, atoms create electromagnetic fields that form repulsion to keep them from touching.

Explanation:

distance travelled = average speed x time

                               =30m/s*100s

                                =3000m

Answer:

3000m

Explanation:

30m/s*100s

3000m

Answer:

The experimental scientist

[tex]we \: know \: that \\ acceleration = \frac{(final \: velocity - initial \: velocity)}{time} \\ = > a = \frac{(v - u)}{t} \\ = > 2m {s}^{ - 2} = \frac{{(v - 10m {s}^{ - 1} })}{5s} \\ = > 2m {s}^{ - 2} \times 5s = v - 10m {s}^{ - 1} \\ = > 10m {s}^{ - 1} = v - 10m {s}^{ - 1} \\ = > 10m {s}^{ - 1} + 10m {s}^{ - 1} = v \\ = > 20m {s}^{ - 1} = v \\ = > 20m {s}^{ - 1} = initial \: velocity[/tex]

Hope it helps!!

Thanks!!

Answer:

20 ms

Explanation:

You know

acceleration=2ms        initial Velocity=10ms          Time=5s

We are finding Final V

Use the equation     Final v = (a x t) + initial v

2 x 5 = 10

10 + 10 = 20

Answer:

La rapidez del móvil es 12 kilómetros por hora.

Explanation:

Asumamos que el móvil experimenta un movimiento rectilíneo uniforme, cuya ecuación cinemática es la siguiente:

[tex]v = \frac{x}{t}[/tex] (1)

Where:

[tex]x[/tex] - Distancia recorrida, en kilómetros.

[tex]t[/tex] - Tiempo, en horas.

[tex]v[/tex] - Rapidez, en kilómetros por hora.

Si tenemos que [tex]x = 6000\,m[/tex] y [tex]t = 30\,min[/tex], entonces la rapidez del móvil es:

[tex]v = \frac{6000\,m\times \frac{1}{1000}\,\frac{km}{m}}{30\,min \times \frac{1}{60}\,\frac{h}{min} }[/tex]

[tex]v = 12\,\frac{km}{h}[/tex]

La rapidez del móvil es 12 kilómetros por hora.