A certain electrochemical cell has a cell potential of +0.34 V. Which of the following is a true statement about the electrochemical reaction?

a. The reaction is reactant favored and would be considered an electrolytic cell.
b. The reaction is reactant favored and would be considered a voltaic (galvanic) cell.
c. The reaction is product favored and would be considered an electrolytic cell.
d. The reaction is at equilibrium and is a voltaic (galvanic) cell.
e. The reaction is product favored and would be considered a voltaic (galvanic

Answer:

6.5 mg/L.

Explanation:

Step one: write out and Balance the chemical reaction in the Question above:

NiCl2 + 2AgNO3 =====> 2AgCl + Ni(NO3)2.

Step two: Calculate or determine the number of moles of AgCl.

So, we are given that the mass of AgCl = 3.6 mg = 3.6 × 10^-3 g. Therefore, the number of moles of AgCl can be calculated as below:

Number of moles AgCl = mass/molar mass = 3.6 × 10^-3 g / 143.32. = 2.5118 × 10^-5 moles.

Step three: Calculate or determine the number of moles of NiCl2.

Thus, the number of moles of NiCl2 = 2.5118 × 10^-5/ 2 = 1.2559 × 10^-5 moles.

Step four: detemine the mass of NiCl2.

Therefore, the mass of NiCl2 = number of moles × molar mass = 1.2559 × 10^-5 moles × 129.6 = 1.6 × 10^-3 g.

Step five: finally, determine the concentration of NiCl2.

1000/ 250 × 1.6 × 10^-3 g. = 6.5 mg/L.

Answer:

Mass = 11.688g

Explanation:

Volume = 2.00L

Molar concentration = 0.100M

Mass = ?

These quantities are relatted by the following equation;

Conc = Number of moles / volume

Number of moles = Conc * Volume = 2 * 0.100 = 0.2 mol

Number of moles = Mass / Molar mass

Mass = Number of moles * Molar mass

Mass = 0.2mol * 58.44g/mol

Mass = 11.688g

Answer:

(a) when a reaction system reaches a state of equilibrium, the concentration of the products is equal to the concentration of the reactants

Determining whether the statements about equilibrium is True or False

A) The concentration of the products is equal to the concentration of the reactants at equilibrium : TRUE

B) When a system is at equilibrium, Keq = 1 : TRUE

C) The rates of the forward reaction and the reverse reaction are equal at equilibrium :  TRUE

D) Adding a catalyst to a reaction system will shift the position of equilibrium to the right : FALSE

In a chemical reaction at equilibrium the value of Keq will be equal to 1 because the concentration of the products is equal to the concentration of the reactants in the chemica reaction. Also at equilibrium the rate of forward reaction is same as the rate of reverse reaction.

A catalyst can only affect the rate of reaction and not the amount of product ( yield of reaction).

Hence we can conclude that the answers to your questions are as listed above.

Learn more about Equilibrium : https://brainly.com/question/517289

#SPJ2

Answer:

1. 0.00352 M

2. 2HNO3(aq) + Sr(OH)2(aq) -----> Sr(NO3)2(aq) + 2H2O(l)

3. 0.00534 M

Explanation:

1.

Mass of strontium hydroxide= 10.45 g

Volume of solution = 41.00 ml

Number of moles = mass of Sr(OH)2/molar mass of Sr(OH)2 = 10.45g/121.63 g/mol= 0.0859 moles

Molarity= number of moles × volume = 0.0859 ×41/1000 = 0.00352 M

2.

2HNO3(aq) + Sr(OH)2(aq) -----> Sr(NO3)2(aq) + 2H2O(l)

3.

Concentration of acid CA= the unknown

Volume of acid VA= 31.5 ml

Concentration of base CB= 0.00352 M

Volume of base VB= 23.9 ml

Number of moles of acid NA= 2

Number of moles of base NB= 1

From;

CAVA/CBVB = NA/NB

CAVANB= CBVBNA

CA= CBVBNA/VANB

CA= 0.00352 × 23.9 ×2/31.5 ×1

CA= 0.00534 M

A. The molarity of the Sr(OH)₂ solution is 2.09 M

B. The balanced equation for the reaction is

2HNO₃ + Sr(OH)₂ —> Sr(NO₃)₂ + 2H₂O

C. The molarity of the acid, HNO₃ is 3.17 M

A. Determination of the molarity of the Sr(OH)₂ solution

Mass of Sr(OH)₂ = 10.45 g

Molar mass of Sr(OH)₂ = 88 + 2(16 + 1) = 122 g/mol

Mole = mass / molar mass

Mole of Sr(OH)₂ = 10.45 / 122

Mole of Sr(OH)₂ = 0.0857 mole

Volume = 41 mL = 41 / 1000 = 0.041 L

Molarity = mole / Volume

Molarity of Sr(OH)₂ = 0.0857 / 0.041

B. The balanced equation for the reaction.

C. Determination of the molarity of the acid, HNO₃.

From the balanced equation above,

The mole ratio of the acid, HNO₃ (nA) = 2

The mole ratio of the base, Sr(OH)₂ (nB) = 1

From the question given above,

Volume of base, Sr(OH)₂ (Vb) = 23.9 mL

Molarity of base, Sr(OH)₂ (Mb) = 2.09 M

Volume of acid, HNO₃ (Va) = 31.5 mL

MaVa / MbVb = nA/nB

(Ma × 31.5) / (2.09 × 23.9) = 2

(Ma × 31.5) / 49.951 = 2

Cross multiply

Ma × 31.5 = 49.951 × 2

Ma × 31.5 = 99.902

Divide both side by 31.5

Ma = 99.902 / 31.5

Thus, molarity of the acid, HNO₃ is 3.17 M

Learn more: https://brainly.com/question/25651648

Answer:

176.8 g of ammonia, NH3.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

N2 + 3H2 —> 2NH3

Next, we shall determine the mass of H2 that reacted and the mass of NH3 produced from the balanced equation. This is illustrated below:

Molar mass of H2 = 2x1 = 2 g/mol

Mass of H2 from the balanced equation = 3 x 2 = 6 g

Molar mass of NH3 = 14 + (3x1) = 17 g/mol

Mass of NH3 from the balanced equation = 2 x 17 = 34 g.

From the balanced equation above,

6 g of H2 reacted to produce 34 g of NH3.

Finally, we shall determine the mass of ammonia, NH3 produced by reacting 31.2 g of H2.

This can be obtained as follow:

From the balanced equation above,

6 g of H2 reacted to produce 34 g of NH3.

Therefore, 31.2 g of H2 will react to produce = (31.2 x 34)/6 = 176.8 g of NH3.

Therefore, 176.8 g of ammonia, NH3 were obtained from the reaction.

Answer:

Half-life at 629K = 252.4min

Explanation:

Using Arrhenius equation:

[tex]ln\frac{K_1}{K_2} = \frac{Ea}{R} (\frac{1}{T_2} -\frac{1}{T_1})[/tex]

And as Half-life in a first order reaction is:

[tex]t_{1/2}=\frac{ln2}{K}[/tex]

We can convert the half-life of 58.0min to know K₁ adn replacing in Arrhenius equation find half-life at 629K:

[tex]58.0min=\frac{ln2}{K}[/tex]

K = 0.01195min⁻¹ = K₁

[tex]ln\frac{0.01195min^{-1}}{K_2} = \frac{218kJ/mol}{8.314x10^{-3}kJ/molK} (\frac{1}{629K} -\frac{1}{652K})[/tex]

[tex]ln\frac{0.01195min^{-1}}{K_2} =1.47[/tex]

[tex]\frac{0.01195min^{-1}}{K_2} =4.35[/tex]

K₂ = 2.75x10⁻³ min⁻¹

And, replacing again in Half-life expression:

[tex]t_{1/2}=\frac{ln2}{2.75x10^{-3}min^{-1}}[/tex]

The half-life of the first-order reaction of ethylene oxide decomposition at 629 K is 251.1 min when the half-life at 652 K is 58.0 min and the activation energy is 218 kJ/mol.   

The activation energy of a reaction is related to its rate constant as follows:  

[tex] k = Ae^{-\frac{E_{a}}{RT}} [/tex]   (1)

Where:

We can find the rate constant of the first-order reaction at 652 K with the half-life as follows:

[tex]k_{652} = \frac{ln(2)}{t_{1/2}_{(652)}}[/tex]   (2)

Where [tex]t_{1/2}_{(652)}[/tex] is the half-life at 652 K= 58.0 min

Hence, the rate constant at 652 K is:                            

[tex] k_{652} = \frac{ln(2)}{58.0 min} = 0.012 min^{-1} [/tex]

Now, from equation (1) we can find the pre-exponential factor (A):

[tex]A = \frac{k_{652}}{e^{(-\frac{E_{a}}{RT_{1}})}} = \frac{0.012 \:min{-1}}{e^{(-\frac{218\cdot 10^{3} \:J/mol}{8.314 \:J/(K*mol)*652 \:K})}} = 3.51 \cdot 10^{15} min^{-1}[/tex]  

With the pre-exponential factor we can calculate the rate constant at 629 K (eq 1):

[tex]k_{629} = 3.51 \cdot 10^{15} min^{-1}*e^{(-\frac{218 \cdot 10^{3} J/mol}{8.314 J/(K*mol)*629 K})} = 2.76 \cdot 10^{-3} min^{-1}[/tex]

Finally, the half-life at 629 K is (eq 2):

[tex] t_{1/2}_{629} = \frac{ln(2)}{2.76\cdot 10^{-3} min^{-1}} = 251.1 min [/tex]

Therefore, the half-life at 629 K is 251.1 min.

Find more about activation energy here:

I hope it helps you!

Answer:

See figure 1

Explanation:

We have to remember that in the isomer structures we have to change the structure but we have to maintain the same formula, in this case [tex]C_4H_1_1N[/tex].

In the formula, we have 1 nitrogen atom. Therefore we will have as a main functional group the amine group.

In the amines, we have different types of amines. Depending on the number of carbons bonded to the "N" atom. In the primary amines, we have only 1 C-H. In the secondary amines, we have two C-N bonds and in the tertiary amines, we have three C-N bonds.

With this in mind, we can have:

-) Primary amines:

1) n-butyl amine

2) sec-butyl amine including 2 optical isomers

3) isobutyl amine

4) tert-butyl amine

-) Secondary amines:

5) N-methyl n-propyl amine

6) N-methyl isopropyl amine

7) N, N-diethyl amine

-) Tertiary amines:

8) N-ethyl N, N-dimethyl amine

See figure 1

I hope it helps!

Answer:

The answer is

Explanation:

1 mole of acid.

Hope this helps....

Have a nice day!!!!

A buffer that is 1 M in acid and base will have the greatest capacity of buffer, and therefore the greatest buffer capacity.

A weak acid and the conjugate base of the weak acid, or a weak base and the conjugate acid of the weak base, are combined to form the buffer solution, a water-based solvent solution.

In a biological system, a buffer's keep intracellular and extracellular pH levels within a relatively small range and to withstand pH fluctuations brought on by both internal and external factors.

A buffer is a substance that can withstand a pH shift when acidic or basic substances are added. It may balance out little quantities of additional acid or base, keeping the pH stable.

Thus, 1 M in acid and base solution has the greatest buffer capacity.

To learn more about the buffer solution, follow the link;

https://brainly.com/question/24262133

#SPJ6

Answer:

See figure 1

Explanation:

For this reaction, we have the production of a carbanion as the first step. The base "ethoxide" can remove a hydrogen-producing a negative charge in the carbon (enolate anion 1). Then this negative charge can attack the carbon of the carbonyl group in the molecule acetaldehyde and the tetrahedral intermediate 2 is form. In the next step, we have the protonation of the oxygen to produce alcohol 3. A continuation we have the hydrolysis of the ester groups to produce the Dicarboxyamino alcohol and finally, we have a decarboxylation reaction we will produce the amino acid Threonine.

To further explanations see figure 1

I hope it helps!

Answer:

Answers are in the explanation.

Explanation:

In a chemical reaction we can determine the sign of ΔSsys based on the states of products and reactants knowing that:

Entropy of gases >>> entropy of liquid > entropy of solids.

The entropy of solids is lower than entropy of liquids that is lower than entropy of gases.

In the reactions:

1. 2H₃O⁺(aq) + CO₃²⁻(aq) → CO₂(g) +3H₂O(l)

As 1 gas is produced, entropy of products is higher than entropy of reactants. That means  ΔSsys > 0 (That because ΔSsys is ΔSProducts - ΔSReactants)

2. CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(l)

3 moles of gas are converted in 1 mole of gas in products. Entropy of reactants is higher than entropy of products, ΔSsys < 0.

3. Mg(s) + Cl₂(g) → MgCǐ₂(s)

You have 1 mole of gas in reactants and 1 mole of solid in products. ΔSProducts <<< ΔSReactants. ΔSsys < 0.

4. SO₃(g) + H₂O(I) → H₂SO₄(I)

1 mole of gas in reactants, a liquid in products. ΔSProducts <<< ΔSReactants. ΔSsys < 0.

Determining the sign of ΔSsys for each given chemical reaction, the following can be obtained without calculations:

1. ΔSsys > 0.

2. ΔSsys < 0

3. ΔSsys < 0

4. ΔSsys < 0

Recall:

Thus:

In the first chemical reaction, 1 mole of gas is produced, therefore: ΔSsys > 0.

In the second chemical reaction, 3 moles of gasses gives a products of 1 mole of gas, therefore: ΔSsys < 0.

In the third chemical reaction, 1 mole of gas gives 1 mole of solid as product, therefore: ΔSsys < 0.

In the fourth chemical reaction, 1 mole of gas gives 1 mole of liquid as product, therefore: ΔSsys < 0.

Learn more here:

https://brainly.com/question/1218700

Answer:

461.85 degrees Celsius

Answer:

.217, .311, and .472, respectively.

Explanation:

The total number of moles of gas is 3.50 + 5.00 + 7.60 = 16.10 (to preserve significant digits).

X of helium=3.50/16.10 = .217

X of krypton=5.00/16.10 = .311

X of neon=7.60/16.10 = .472

Answer: NaCl would give the higher pressure

Explanation:

Osmotic pressure depends only on the number of ions.

NaCl dissociates as Na+ and Cl- ; CsBr  dissociates as Cs+ and Br-

But the concentration of the solutions are different.  

Concentration (morality ) of NaCl = Moles /Litre = (1 g /58.44g/mol)/0.01L

Total number of ions in NaCl solution = 2 x (1 g /58.44g/mol)/0.01L ( 1 mol NaCl gives 2 moles ions, 1 mol Na+ and 1 mol Cl-)  

= 1.71×2RT

Similarly total number of ions in CsBr solution = 2 x (1 g /212.80 g/mol)/0.01L

= 0.47×2RT

Therefore osmotic pressure is higher in NaCl solution.

Answer:

Yes

Explanation:

The balanced equation of the reaction is;

FeBr2 (aq) + Cl2 (g) → FeCl2 (aq) + Br2 (aq)

This reaction is possible because chlorine is more electronegative than bromine and can displace it from its salt.

In group seventeen, electro negativity decreases down the group. Hence as we move down the group, elements become less electronegative and can be displaced from their salt by more electronegative elements found earlier in the group.

Hence chlorine can displace bromine in FeBr2 to form FeCl2.

Answer:

Yes, because Cl2 has higher activity than Br2

Explanation:

Answer:

8.05 moles

Explanation:

5.50 / 2.954 = x / 4.325

x = 8.05

According to ideal gas equation, if the temperature and pressure stay constant during the process 0.520 moles have been added  so that the balloon expands to 4.325 L.

The ideal gas equation is a equation which is applicable in a hypothetical state of an ideal gas.It is a combination of Boyle's law, Charle's law,Avogadro's law and Gay-Lussac's law . It is given as, PV=nRT where R= gas constant whose value is 8.314.The law has several limitations.The law was proposed by Benoit Paul Emile Clapeyron in 1834.

In the given example if pressure and temperature are constant then V=nR substituting V=4.325 l and R=8.314  so n=V/R=4.325/8.314=0.520 moles.

Thus, 0.520 moles of helium are added if the temperature and pressure stay constant during this process.

Learn more about ideal gas equation,here:

https://brainly.com/question/28837405

#SPJ2

Answer:

The general formula of the hydrate is Caa Seb Oc. nH2O. Based on the given information, the weight of the hydrated compound is 256.3 grams, the weight of the anhydrous compound is 214.2 grams.  

Therefore, the weight of water evaporated is 256.3 g - 214.2 g = 42.1 grams

The molecular weight of water is 18 gram per mole. So, the number of moles of water will be,  

Moles of water = weight of water/molecular weight

= 42.1 grams / 18 = 2.3

The given composition of calcium is 21.90 %. So, the concentration of calcium in anhydrous compound is,  

= 214.2 * 0.2190 = 46.91 grams

The given composition of Se is 43.14 %. So, the concentration of selenium in anhydrous compound is,

= 214.2 * 0.4314 = 92.40 grams

The given composition of oxygen is 34.97%, So, the concentration of oxygen in anhydrous compound is,  

= 214.2 * 0.3497 = 74.91 grams

The molecular weight of Ca is 40.078, the obtained concentration is 46.91 grams, stoichiometry will be, 46.91/40.078 = 1.17

The molecular weight of Se is 78.96, the obtained concentration is 92.40, stoichiometry will be,  

92.40/78.96 = 1.17

The molecular weight of Oxygen is 15.999, the concentration obtained is 74.91, the stoichiometry will be,  

74.91/15.999 = 4.68.  

Thus, the formula becomes, Ca1.17. Se1.1e O4.68. 2.3H2O, the closest actual component is CaSeO4.2H2O

Answer:

a. Ca₃(PO₄)₂.

b. 0.010 moles of Ca₃(PO₄)₂ can we expect to be produced

c. 3.1g of Ca₃(PO₄)₂

d. Percent yield = 93.5%

Explanation:

a. Based on the reaction:

3Ca(NO₃)₂(aq) + 2Na₃PO₄(aq) → Ca₃(PO₄)₂(s) + 6NaNO₃(aq)

3 moles of calcium nitrate reacts with 2 moles of sodium phosphate producieng 1 mole of calcium phosphate.

As you can see, Ca₃(PO₄)₂ is a solid product -(s)-, that means when the reaction occurs the precipitate produced is the solid,

b. As 3 moles of calcium nitrate produce 1 mole of calcium phosphate and there are 0.030 moles of calcium nitrate

0.030 moles Ca(NO₃)₂ × (1 mol Ca₃(PO₄)₂ / 3 moles Ca(NO₃)₂) =

c. As molar mass of Ca₃(PO₄)₂ is 310.18g/mol, the mass of 0.010 moles (The expected mass) is;

0.010 moles Ca₃(PO₄)₂ × (310.18g / mol) =

d. The percent yield is defined as 100 times the ratio between the obtained yield (That is 2.9g of precipitate, Ca₃(PO₄)₂) and the expected yield, 3.1g of Ca₃(PO₄)₂:

[tex]\frac{2.9g}{3.1g} *100[/tex]

(a) The product in solid state would be the precipitate. Hence, the precipitate would be Ca3(PO4)2

(b) From the balanced equation of the reaction: 3 moles of Ca(NO3)2 is required for 1 mole of Ca3(PO4)2

If there are just 0.030 moles of Ca(NO3)2, then"

3 moles = 1

0.030 moles =    1 x 0.030/3

                         = 0.01 moles of Ca3(PO4)2

In other words, 0.01 moles of the precipitate would be expected to be produced from 0.030 moles of calcium nitrate.

(c) 0.01 moles solid (Ca3(PO4)2) is expected. Mass of Ca3(PO4)2 expected:

      mass   = mole x molar mass

molar mass of Ca3(PO4)2 = 310.18 g/mol

mass of Ca3(PO4)2 expected to be produced = 0.01 x 310.18

                                                                       = 3.1018 g

Hence, 3.1018g of solid is expected to be produced.

(d) Percentage yield = actual yield/theoretical yield x 100

                          = 2.9/3.1018 x 100

                               = 93.5%

More on precipitation reaction can be found here:  https://brainly.com/question/24158764

Answer:

73.1707317073%

=> Approximately 73.2%

Explanation:

Total = 60 + 10 + 12

=> 82

Test tubes are 60/82

=> 30/41

=> 73.1707317073%

=> Approximately 73.2%

Answer:

73.17%

Explanation:

To find the percentage of test tubes to the overall glassware, we need to get the number of test tubes divided by the total number of glassware.

12 beakers + 10 flasks + 60 test tubes = 82 glassware

% test tube = 60 / 82 = .7317 ==> 73.17 %

So 73.17 % of the glassware was test tubes.

Cheers.

Answer:

OPTION C is correct

3.86 x 10-19 J

Explanation:

Energy of the line can be calculated using below formula

E= h ν.................(1)

Where E= energy

h= plank constant= 6.626 10-34 J s

c=speed of light=3 x 108 m/s

But we know that Velocity V= = c / λ

Then substitute into equation (1) we have

E = h c / λ.............(2)

We can calculate our( hc ) in nm for unit consistency

h c =( 6.626 ×10^-34)x(3×108)

h c = (1.986 x 10-16 )

hc = 1.986 x 10-16 J nm then since our (hc) and λ are in the same unit , were good to go then substitute into equation(2)

E = h c / λ = (1.986 x 10-16) / 515

E = 3.86 x 10-19 J

Therefore, the Energy is 3.86 x 10-19 J

Answer:

a. NCl3

Explanation:

All the elements stated are non metals. Generally the bond between non metals is a covalent bond. However depending on how the electrons are shared, this bond can either be polar or non polar.

A non polar covalent bond is formed when the electrons are shared equally between the atoms.

A way to determine if a bond is non polar or polar covalent is by comparing the electronegativity values.

If the electronegativity difference is less than 0.5, it is regarded as a non polar covalent bond.

Going back to the question;

Between N and Cl; the electronegativity difference is 3.0 - 3.0 = 0

Between Cl and O; the electronegativity difference is 3.5 - 3.0 = 0.5

Between Cl and P; the electronegativity difference is 3.5 - 2.1 = 1.4

From these we can tell that the correct option is option A.

Answer:

The specific heat of the sample [tex]\mathbf{c_3 = 1011.056 \ J/kg.K}[/tex]

Explanation:

Given that:

mass of an unknown sample [tex]m_3[/tex] = 0.0850

temperature of the unknown sample [tex]t_{unknown}[/tex] = 100° C

initial temperature of the calorimeter can = 19° C

mass of copper [tex]m_1[/tex] = 0.150 kg

mass of water [tex]m_2[/tex]= 0.20 kg

the final temperature of the calorimeter can = 26.1° C

The objective is to compute the specific heat of the sample.

By applying the principle of conservation of energy

[tex]Q = mc \Delta T[/tex]

where;

[tex]Q_1 +Q_2 +Q_3 = 0[/tex]        

i.e

[tex]m_1 c_1 \Delta T_1 +m_2 c_2 \Delta T_2+m_3 c_3 \Delta T_3 =0[/tex]

the specific heat capacities of water and copper are 4.18 × 10³ J/kg.K and 0.39 × 10³ J/kg.K respectively

the specific heat of the sample [tex]c_3[/tex] can be computed by making [tex]c_3[/tex]  the subject of the above formula:

i.e

[tex]c_3 = \dfrac{m_1 c_1 \Delta T_1 +m_2 c_2 \Delta T_2}{m_3 c_3 \Delta T_3}[/tex]

[tex]c_3 = \dfrac{ 0.150 \times 0.39 \times 10^3 \times (26.1 -19) + 0.20 \times 4.18 \times 10^3 \times (26.1 -19) }{0.0850 \times (100-26.1 )}[/tex]

[tex]c_3 = \dfrac{ 0.150 \times 0.39 \times 10^3 \times (7.1) + 0.20 \times 4.18 \times 10^3 \times (7.1) }{0.0850 \times (73.9)}[/tex]

[tex]c_3 = \dfrac{415.35 + 5935.6 }{6.2815}[/tex]

[tex]c_3 = \dfrac{415.35 + 5935.6 }{6.2815}[/tex]

[tex]c_3 = \dfrac{6350.95}{6.2815}[/tex]

[tex]\mathbf{c_3 = 1011.056 \ J/kg.K}[/tex]

The specific heat of the sample [tex]\mathbf{c_3 = 1011.056 \ J/kg.K}[/tex]

Answer:

Explanation:

Answer in attached file .

Answer:

6.93

Explanation:

Step 1: Given data

Step 2: Convert the temperature to the Kelvin scale

We will use the following expression.

K = °C + 273.15

K = 50°C + 273.15

K = 323 K

Step 3: Calculate K

We will use the following expression.

∆G° = -R × T × ln K

-5.20 × 10³ J = -(8.314 J/mol.K) × 323 K × ln K

K = 6.93

Answer: [tex]NF_3[/tex]

Explanation:

Geometrical symmetry of the molecule and the polarity of the bonds determine the polarity of the molecule.

The molecule that has zero dipole moment that means it is a geometrically symmetric molecule and the molecule which has some net dipole moment means it is a geometrically asymmetric molecule.

As the molecule is symmetric, the dipole moment will be zero as dipole moments cancel each other and the molecule will be non-polar.

As the molecule is asymmetric, the dipole moment will not be zero and the molecule will be polar.

Example: [tex]NF_3[/tex]

Thus, we can say that [tex]NF_3[/tex] is a polar molecule.

Answer:

C;  ΔSuniv>0

Explanation:

In this question, we want to select which of the options must be true.

What we should understand is that for a process to be spontaneous, the change in entropy must be greater than 0 i.e the change in entropy must be positive.

Looking at the options we have; option C is the correct answer.

Option B looks correct but it is wrong. This is because if change in universal entropy is greater than zero, then change in Gibbs free energy must be less than zero for spontaneity to occur

It can be deduced that for a spontaneous process, B. ΔG>0.

It should be noted that a spontaneous process simply means a process that occurs without input of matter or electrical energy.

In this case, for a spontaneous process, it's true that ΔG>0, it should be noted that a spontaneous process related to the second law in thermodynamics. This is characterized by an increase in entropy.

Learn more about spontaneous process on:

https://brainly.com/question/2855292

Answer:

[tex]m_{CaCO_3}=0.179gCaCO_3[/tex]

Explanation:

Hello,

In this case, since the undergoing chemical reaction is:

[tex]CaCO_3(s)\rightarrow CaO(s)+CO_2(g)[/tex]

The corresponding moles of carbon dioxide occupying 40.0 mL (0.0400 L) are computed by using the ideal gas equation at 273.15 K and 1.00 atm (STP) as follows:

[tex]PV=nRT\\\\n=\frac{PV}{RT}=\frac{1.00 atm*0.0400L}{0.082\frac{atm*L}{mol*K}*273.15 K})=1.79x10^{-3} mol CO_2[/tex]

Then, since the mole ratio between carbon dioxide and calcium carbonate is 1:1 and the molar mass of the reactant is 100 g/mol, the mass that yields such volume turns out:

[tex]m_{CaCO_3}=1.79x10^{-3}molCO_2*\frac{1molCaCO_3}{1molCO_2} *\frac{100g CaCO_3}{1molCaCO_3}\\ \\m_{CaCO_3}=0.179gCaCO_3[/tex]

Regards.

The mass of CaCO₃ required to produce 40.0 mL of CO₂ at STP is 0.179 g

From the question,

We are to determine the mass of CaCO₃ required to produce 40.0 mL of CO₂ at STP.

First, we will determine the number of mole of CO₂ required to be produced

From the formula

PV = nRT

Where

P is the pressure

V is the volume

n is the number of moles

R is the ideal gas constant

and T is the temperature

Then, we can write that

[tex]n = \frac{PV}{RT}[/tex]

From the question,

V = 40.0 mL = 0.04 L

At STP

P = 1 atm

T = 273.15 K

and

R = 0.08206 L atm mol⁻¹ K⁻¹

Putting the parameters into the formula, we get

[tex]n = \frac{1 \times 0.04}{0.08206 \times 273.15}[/tex]

∴ n = 0.0017845 mole

Now, we will write the balanced chemical equation for the decomposition of CaCO₃

CaCO₃ → CaO + CO₂

This means,

1 mole of CaCO₃ will decompose to produce 1 mole of CO₂

Since 0.0017845 mole of CO₂ is to be produced,

Then,

0.0017845 mole of CaCO₃ would be required

Now, for the mass of CaCO₃ required,

Using the formula

Mass = Number of moles × Molar mass

Molar mass of CaCO₃ = 100.0869 g/mol

∴ Mass of CaCO₃ required = 0.0017845 × 100.0869

Mass of CaCO₃ required = 0.178605 g

Mass of CaCO₃ required ≅ 0.179 g

Hence, the mass of CaCO₃ required to produce 40.0 mL of CO₂ at STP is 0.179 g

Learn more here: https://brainly.com/question/17169574

Answer: The number of moles of a solute per kilogram of solvent

Explanation:

Answer:158 days (D)

Explanation:

It will take 158 days for grass contaminated with Sr-90 to be safe for cattle to eat. Therefore, option (A) is correct.

The half-life of a radioactive material is defined as the time that is needed to reduce the initial quantity of a radioactive element to half after disintegration.

The half-life of a radioactive element can be described as the characteristic of the element and does not influence by the initial amount of the radioactive substance.

Given, the half-life of the Strontium-90 = 28 days

The rate constant of the decay can be determined as:

[tex]t_{\frac{1}{2} } =\frac{0.693}{k}[/tex]

[tex]k=\frac{0.693}{t_{\frac{1}{2} } }[/tex]

k = 0.693/28

k = 0.025 day⁻¹

The concentration of Strontium-90 reduced to less than 2% is safe. Therefore final concentration [A] = 2 % = 0.02

[tex]t = \frac{2.303}{k} log \frac{[A_o]}{[A]}[/tex]

[tex]t = \frac{2.303}{0.02475} log \frac{1}{[0.02]}[/tex]

t = 158 days

Learn more about the half-life period, here:

brainly.com/question/14521252

#SPJ5

Answer:

804 J

Explanation:

Step 1: Given data

Step 2: Calculate the energy required (Q)

We will use the following expression.

Q = c × m × ΔT

Q = 0.0235J·g⁻¹K⁻¹ × (1.50 × 10³g) × [15.0°C-(-7.8°C)]

Q = 804 J