An investor will earn $171.45 more from a single $93,000, 180-day GIC than from two $46,500, 180-day GICs.
To calculate the earnings from each investment option, we need to determine the interest earned on each GIC.
For a single $93,000, 180-day GIC at a rate of 7.05%, the interest earned can be calculated as follows:
Interest = Principal x Rate x Time
Interest = $93,000 x 0.0705 x (180/365)
Interest ≈ $3,665.48
For two $46,500, 180-day GICs at a rate of 6.80%, the interest earned for each GIC can be calculated as:
Interest = Principal x Rate x Time
Interest = $46,500 x 0.0680 x (180/365)
Interest ≈ $1,789.03
Since there are two GICs, the total interest earned from both GICs would be $1,789.03 x 2 = $3,578.06.
The difference in earnings between the two options is the amount earned from the single GIC minus the amount earned from the two GICs:
Difference = $3,665.48 - $3,578.06
Difference ≈ $87.42
Therefore, an investor will earn approximately $87.42 more from a single $93,000, 180-day GIC than from two $46,500, 180-day GICs.
Learn more about investors here:
https://brainly.com/question/33035723
#SPJ11
B. Higgins, J. Mayo, and N. Rice have capital balances of $85,000, $74,000, and $68,000, respectively. They share income or loss on a 5:3:2 basis. Rice withdraws from the partnership under each of the following conditions. 1.- Rice is paid $72,080 in cash from partnership assets, and a bonus is granted to the retiring partner. 2. Rice is paid $64,000 in cash from partnership assets, and bonuses are granted to the remaining partners. Journalize the withdrawal of Rice under each of the assumptions above. (Credit account titles are automatically indented when amount is entered. Do not indent manually.) No. Account Titles and Explanation ____ Debit ____ Credit ____
The journal entries for Rice's withdrawal from the partnership under the given conditions are given below:1. Rice is paid $72,080 in cash from partnership assets, and a bonus is granted to the retiring partner.
Therefore, it is considered as a loss for the partnership. The amount of loss is calculated as follows:
Amount paid to Rice = $72,080
Retiring bonus = (Capital balance of Rice x percentage share of Rice) - Amount paid to Rice = (68000 x 2/10) - 72080 = 1360 - 72080 = -70720 (negative balance means that it is a loss for the partnership)
Total loss = Amount paid to Rice + Retiring bonus = 72080 + (-70720) = 1360
Therefore, Rice's withdrawal journal entry is:Account Title/Explanation Debit Credit Cash $72,080
Rice's Capital Account ($68,000 x 2/10) $13,600 Higgins' Capital Account ($85,000 x 5/10) $34,000
Mayo's Capital Account ($74,000 x 3/10) $20,480 Loss on withdrawal of partner ($1,360) Total $72,080 $72,0802.
Rice is paid $64,000 in cash from partnership assets, and bonuses are granted to the remaining partners.In this case, Rice is leaving the partnership with the consent of the other partners. Therefore, it is considered as a goodwill of the partnership. The amount of goodwill is calculated as follows:
Amount paid to Rice = $64,000
Goodwill = (Total capital of remaining partners x percentage share of Rice) - Amount paid to Rice= [(85000 + 74000) x 2/10] - 64000= 15900
Therefore, Rice's withdrawal journal entry is:
Account Title/Explanation Debit Credit Cash $64,000
Rice's Capital Account ($68,000 x 2/10) $13,600
Goodwill $15,900
Higgins' Capital Account ($85,000 x 5/10) $26,325
Mayo's Capital Account ($74,000 x 3/10) $18,175
Total $79,500 $79,500
Note: In the above journal entries, account titles are automatically indented when the amount is entered.
For more about partnership assets:
https://brainly.com/question/29388589
#SPJ11
In the economy of Solow, GDP is this: Y = √K The steady state level of capital is 100, and 10% of capital depreciates every year. What percent of output is invested each year? . 18) In the country of Solow, the production function is this: Y =√K. Every year, 10% of capital falls apart. Study the production data and then write the percent of output that is invested each year. points)
In the economy of Solow, the production function is given by Y = √K where K is the stock of capital. Each year, 10% of capital depreciates which means that the stock of capital decreases by 10% of its current value.
The steady state level of capital is given as 100.Let's first find the investment rate in the Solow model. The investment rate is defined as the fraction of output that is invested each year. Mathematically, it is given as follows: I/Y = where I is the investment.
The production function gives us. In steady state, the stock of capital is constant which means that. This means that investment is equal to depreciation. Mathematically, it is given as follows.1KSubstituting this value of I in the equation I/Y = s, we get = I/Y = 0.1K/√K = 0.1√K/K = 0.
To know more about production visit:
https://brainly.com/question/30333196
#SPJ11
New knowledge-based innovation is powerful, however the timespan between new knowledge and converting it into a commercial success
a. Medium term
b. Short term
c. Long term
d.Incidental
The timespan between new knowledge and converting it into a commercial success can vary, but it is generally categorized as a c.) long-term process.
Converting new knowledge into a commercial success involves several stages, such as research, development, testing, production, marketing, and market adoption. These processes often take a significant amount of time to complete and achieve commercial viability. Therefore, the correct answer is c. Long term.
When new knowledge is discovered or developed, it often requires further refinement, testing, and validation before it can be transformed into a marketable product or service. This can involve conducting additional research, designing prototypes, conducting trials, and addressing any potential challenges or limitations. Additionally, the time required for market acceptance and adoption can vary depending on factors such as market demand, competition, regulatory requirements, and customer acceptance.
Overall, the process of converting new knowledge into a commercial success is typically a long-term endeavor that requires patience, resources, and strategic planning to navigate the various stages involved in bringing an innovation to market.
Learn more about commercial here: https://brainly.com/question/32839819
#SPJ11
Which of the following is NOT a piece of evidence for the investor underreaction? A. Stocks with higher standardized unexpected earnings tend to earn higher returns in the future. B. The stock market index excess returns are positively autocorrelated at the monthly frequency. C. The stock market index excess returns are negatively autocorrelated at the three to five year horizons. D. Stocks with higher returns in the last six months tend to earn higher returns in the future.
Option A is not a piece of evidence for the investor underreaction. The given options are: A. Stocks with higher standardized unexpected earnings tend to earn higher returns in the future.B.
The stock market index excess returns are positively autocorrelated at the monthly frequency.C. The stock market index excess returns are negatively autocorrelated at the three to five-year horizons.D. Stocks with higher returns in the last six months tend to earn higher returns in the future.
In the light of the given options, the answer to the question would be Option A.A. Stocks with higher standardized unexpected earnings tend to earn higher returns in the future.This statement is related to the unexpected earnings and their relation with the future returns.
To know more about underreaction visit:
https://brainly.com/question/33111254
#SPJ11
Which of the following statements about publicity is FALSE?
Select one:
a. Good publicity doesn't cost the marketer any money
b. Good publicity appears to be spontaneous
c. Publicity is mass media communication
d. Publicity is more credible than paid advertising
e. Press conferences are a common way to generate publicity
The FALSE statement is:
Good publicity doesn't cost the marketer any money.
Statement a is false. Good publicity does not come without costs. While it's true that publicity can generate attention and media coverage without direct payment for ad space, it still requires investment in terms of time, effort, and resources. Marketers often engage in activities like crafting press releases, organizing events, conducting media outreach, and building relationships with journalists, all of which require investments of money and resources.
Publicity is not entirely free, but it can be more cost-effective compared to paid advertising. It relies on capturing the interest of the media and the public through newsworthy content or events. It creates an opportunity for organic exposure and amplification, reaching a wider audience through trusted media channels. However, successful publicity campaigns involve strategic planning, execution, and sometimes even professional assistance, which require financial investment.
Therefore, it's important to recognize that while publicity can offer valuable exposure and credibility, it still entails costs and requires careful management to be effective.
Learn more about investment here:
https://brainly.com/question/17252319
#SPJ11
who is harmed when individual nations move from autarky to free trade?
When individual nations move from autarky to free trade, several parties may be harmed. These include government revenue, domestic industries, and consumers.
1. Government revenue: Moving from autarky to free trade often results in a reduction in tariffs and other trade barriers. This means that the government will have fewer opportunities to collect revenue. Governments may levy tariffs or other taxes on goods imported from other countries. As a result, lowering tariffs means that the government will lose revenue.
2. Domestic industries: Domestic industries will face increased competition as a result of free trade. When a country has a closed economy, its domestic industries are protected from foreign competition. However, once a country opens up to trade, foreign companies will be able to enter the market and compete with domestic companies. If domestic companies are unable to compete, they may be forced to close down, leading to job losses.
3. Consumers: Consumers, on the other hand, are likely to benefit from free trade. With more foreign goods coming into the country, consumers will have more choices, and prices will likely be lower. However, if the country is dependent on imports, it may be vulnerable to sudden price changes or supply disruptions in foreign markets. As a result, consumers may be exposed to greater risks.
Finally, there may be other parties that are not directly affected by free trade but may be impacted indirectly. For example, workers in industries that are not directly affected by free trade may experience reduced wages if companies are forced to cut costs in response to increased competition.
To know more about domestic industries please refer to:
https://brainly.com/question/30001696
#SPJ11
Global companies normally give distribution of their products to third part distributors in foreign countries. What advantages does this distribution method have over the international company doing its own distribution?
Global companies often choose to distribute their products through third-party distributors in foreign countries instead of handling distribution themselves.
This method offers several advantages over companies doing their own distribution. The key advantages include cost savings, local market expertise, established distribution networks, reduced risk, and increased scalability.
By utilizing third-party distributors, global companies can achieve cost savings as they do not need to invest in setting up their own distribution infrastructure, such as warehouses, logistics, and personnel. Third-party distributors also bring local market expertise, understanding the cultural nuances and consumer preferences of the target market. They have established distribution networks, allowing products to reach customers efficiently. Additionally, partnering with local distributors reduces the risk associated with navigating unfamiliar markets, including legal and regulatory challenges. Lastly, utilizing third-party distributors provides scalability, enabling companies to expand their reach in different markets without the need for extensive resources and infrastructure.
To know more about global distribution click here: brainly.com/question/32248392
#SPJ11
Morin Company's bonds mature in 8 years, have a par value of $1,000, and make an annual coupon interest payment of $65. The market requires an interest rate of 7.9% on these bonds. What is the bond's price? a. $919.24 b. $912.18 c. $827.32 d. $948.86 e. $1,374.95
Bond price = Present value of all future cash flows associated with the bond
therefore, the price of the bond is option d) $948.86
The given data are as follows:
Par value of the bond = $1,000
Annual coupon payment = $65
Market interest rate = 7.9%
Time to maturity = 8 years
The bond price can be calculated as follows:
Bond price = Present value of all future cash flows associated with the bond
Future cash flows associated with the bond include annual coupon payments of $65 and the maturity value of $1,000.
Present value of coupon payments can be calculated as follows:
PV of coupon payments = [Coupon payment * (1 - (1 + r / n)^-nt)] / (r / n)
Where r is the market interest rate, n is the number of coupon payments per year, and t is the time to maturity.
Substituting the values, we get:
PV of coupon payments = [65 * (1 - (1 + 0.079 / 1)^-8*1)] / (0.079 / 1)
PV of coupon payments = $456.35
Present value of the maturity value can be calculated as follows:
PV of maturity value = Maturity value / (1 + r)^t
Substituting the values, we get:
PV of maturity value = 1,000 / (1 + 0.079)⁸
PV of maturity value = $467.90
The bond price can be calculated by adding PV of coupon payments and PV of maturity value.
Substituting the values, we get:
Bond price = $456.35 + $467.90
Bond price = $924.25
Therefore, the bond's price is $924.25, closest to option d. $948.86.
For more questions on bond price: https://brainly.com/question/30441958
#SPJ11
Consider a monopolist facing a market demand given by: p = 600 − q
(a) Determine the total revenue function facing the monopolist.
(b) Determine the marginal revenue function.
(c) Suppose the monopolist produces with a total cost function c(q) = q2 + 5. Determine the solution to the profit maximization problem facing the monopolist.
(d) What is the equilibrium outcome if this market were characterized by perfect competition instead?
(e) Calculate the deadweight loss from monopolization.
(f) Illustrate this in a well labelled diagram.
(a) Total Revenue = p * q = (600 - q) * q = 600q - q^2
(b) Marginal Revenue = d(TR) / d(q) = d/dq(600q - q^2) = 600 - 2q
(c) Profit (π) = Total Revenue - Total Cost = (600q - q^2) - (q^2 + 5) = 600q - 2q^2 - 5
(d) In perfect competition, the market is characterized by many firms, and each firm is a price taker, meaning it cannot influence the price. In this case, the market price is determined by the intersection of the market demand and supply.
The total revenue function facing the monopolist is given by multiplying the price (p) by the quantity (q):
Total Revenue = p * q = (600 - q) * q = 600q - q^2
(b) The marginal revenue function is the derivative of the total revenue function with respect to quantity (q):
Marginal Revenue = d(TR) / d(q) = d/dq(600q - q^2) = 600 - 2q
(c) To determine the solution to the profit maximization problem, we need to find the quantity (q) that maximizes the monopolist's profit. Profit (π) is calculated as total revenue minus total cost (TC):
Profit (π) = Total Revenue - Total Cost = (600q - q^2) - (q^2 + 5) = 600q - 2q^2 - 5
To maximize profit, we take the derivative of the profit function with respect to q and set it equal to zero:
d(π) / d(q) = 600 - 4q = 0
Solving for q, we get:
600 - 4q = 0
4q = 600
q = 150
So, the monopolist should produce a quantity of 150 to maximize profit.
(d) In perfect competition, the market is characterized by many firms, and each firm is a price taker, meaning it cannot influence the price. In this case, the market price is determined by the intersection of the market demand and supply. Without specific information about the supply function, we cannot determine the equilibrium outcome in perfect competition.
(e) Deadweight loss is the loss of economic efficiency that occurs when a monopolist restricts output and charges a higher price compared to a perfectly competitive market. To calculate the deadweight loss, we need to compare the quantity produced by the monopolist (q = 150) with the quantity that would be produced in a perfectly competitive market. Without information about the supply function, we cannot determine the exact deadweight loss.
(f However, in a well-labeled diagram, you would typically have quantity (q) on the horizontal axis and price (p) on the vertical axis. The demand curve would be downward-sloping (p = 600 - q), showing the relationship between price and quantity demanded in the market. The monopolist's marginal revenue curve would lie below the demand curve, reflecting the fact that the monopolist must lower the price to sell additional units. The monopolist's profit-maximizing quantity (q = 150) would be where marginal revenue equals marginal cost (which is not given), and the corresponding price can be determined by substituting q into the demand function.
learn more about Revenue here
https://brainly.com/question/29567732
#SPJ11
The 1-day 97.5% VaR of a portfolio of domestic shares is
estimated to be $15 million from historical simulations using 500
observed daily returns. The sample mean and sample standard
deviation of the
Daily returns are also computed to be, let's say, 0.5% and 1.2%, respectively.
To estimate the 1-day 97.5% VaR of a portfolio of domestic shares, historical simulations involve randomly selecting 500 daily returns from the historical data and calculating the portfolio return for each simulation. The 97.5th percentile of the resulting distribution of portfolio returns is then taken as the VaR estimate.
Given that the estimated VaR is $15 million, this means that there is a 2.5% chance that the portfolio will lose more than $15 million in value over a one-day period, assuming that the underlying statistical assumptions of the historical simulation method hold.
The sample mean and sample standard deviation of the daily returns are used to estimate the expected return and volatility of the portfolio, respectively. These estimates are then used to calculate the portfolio return for each simulated scenario in the historical simulation.
It is important to note that historical simulation is just one of many methods used to estimate VaR, and different methods may produce different VaR estimates. Additionally, VaR is just one measure of risk and should be used in conjunction with other risk measures and risk management techniques to ensure an effective risk management strategy.
Learn more about returns here:
https://brainly.com/question/32493906
#SPJ11
A good's demand is given by: \( Q=100-20 P \). At \( Q=20 \), what is the point price elasticity?
To calculate the point price elasticity of demand at a specific quantity (Q) of 20, we need to determine the corresponding price (P) and apply the formula for price elasticity of demand.
Given the demand equation:
�
=
100
−
20
�
Q=100−20P, we can solve for P when Q = 20:
20
=
100
−
20
�
20=100−20P
20
�
=
100
−
20
20P=100−20
20
�
=
80
20P=80
�
=
80
/
20
P=80/20
�
=
4
P=4
So, when Q = 20, the corresponding price P is 4.
The formula for price elasticity of demand is:
�
=
Percentage change in quantity demanded
Percentage change in price
E=
Percentage change in price
Percentage change in quantity demanded
Since we want to calculate the point price elasticity, we need to find the percentage change in quantity and the percentage change in price.
The percentage change in quantity demanded can be calculated as:
Percentage change in quantity demanded
=
Change in quantity demanded
Initial quantity demanded
×
100
Percentage change in quantity demanded=
Initial quantity demanded
Change in quantity demanded
×100
In this case, the change in quantity demanded is 20 - 0 (initial quantity is 0), so the percentage change in quantity demanded is:
Percentage change in quantity demanded
=
20
0
×
100
Percentage change in quantity demanded=
0
20
×100
However, since the denominator is 0, the percentage change in quantity demanded is undefined.
Therefore, we cannot calculate the point price elasticity at Q = 20 using the given demand equation.
Learn more about quantity here
https://brainly.com/question/30010562
#SPJ11
During 2022 , Blossom Company incurred the following direct labor costs: January $16,000 and February $24,000. Blossom uses a predetermined overhead rate of 120% of direct labor cost. Estimated overhead for the 2 months, respectively, totaled $15,600 and $28,560. Actual overhead for the 2 months, respectively, totaled $20,000 and $26,800. Calculate overhead applied. January $ February $ Determine if overhead is over-or underapplied for each of the two months and the respective amounts. January $ February $
In the Blossom Company the overhead applied for January was $19,200 and for February was $28,800. Overhead is underapplied by $800 in January and overapplied by $2,000 in February.
To calculate the overhead applied for each month, we need to multiply the direct labor costs by the predetermined overhead rate.
In January, the direct labor cost was $16,000.
Applying the predetermined overhead rate of 120%, the overhead applied for January is calculated as follows:
Overhead Applied = Direct Labor Cost * Predetermined Overhead Rate
Overhead Applied for January = $16,000 * 120% = $19,200
In February, the direct labor cost was $24,000.
Using the same predetermined overhead rate, the overhead applied for February is calculated as follows:
Overhead Applied for February = $24,000 * 120% = $28,800
To determine if overhead is over- or underapplied, we compare the actual overhead incurred to the overhead applied.
For January, the actual overhead incurred was $20,000, and the overhead applied was $19,200.
The overhead is underapplied by $800.
For February, the actual overhead incurred was $26,800, and the overhead applied was $28,800.
The overhead is overapplied by $2,000.
Therefore, the overhead applied for January was $19,200 and for February was $28,800. Overhead is underapplied by $800 in January and overapplied by $2,000 in February.
For such more question on Blossom Company
https://brainly.com/question/26683013
#SPJ8
How does technology affect Human Resource
management?
Compare training and employee
development.
( 8 sentences or more)
Technology has greatly impacted Human Resource Management (HRM) by automating tasks, improving efficiency, and reducing costs. It has also enhanced communication with employees. Training focuses on specific job-related skills, while employee development aims for long-term growth and expanded capabilities. Both are crucial for organizational success, and technology plays a vital role in supporting and enhancing these processes.
Technology affects Human Resource Management (HRM) in several ways.
Human Resource Management refers to the process of managing personnel in an organization. The development of new technologies has led to the automation of many tasks that were previously done manually. This has led to more efficiency in HRM. Here are some ways in which technology affects HRM:
Efficiency: Technology has made it easier to automate routine tasks such as payroll, benefits administration, and employee record-keeping. This has led to more efficient HRM processes and reduced the time and effort needed to manage these tasks. As a result, HR professionals can spend more time on strategic activities, such as talent management and employee development.Cost savings: Technology has also led to cost savings in HRM. Automation of HR processes has reduced the need for manual labor, which has reduced labor costs. It has also reduced the amount of paper used in HRM processes, which has reduced paper costs. This has led to cost savings for organizations.Improved communication: Technology has made it easier for HR professionals to communicate with employees. For example, HR professionals can use email, chat, or video conferencing to communicate with employees in different locations. This has made it easier to communicate with employees who work remotely or who are located in different parts of the world.Training and Employee Development: Training and employee development are two important processes that are essential to the success of any organization. Training is the process of teaching employees the skills and knowledge they need to perform their jobs effectively. Employee development, on the other hand, refers to the process of developing employees' skills and knowledge over time so that they can take on new roles and responsibilities within the organization.Here are some ways in which training and employee development compare:
Purpose: Training is designed to teach employees specific skills that are needed to perform their jobs effectively. Employee development, on the other hand, is designed to develop employees' skills and knowledge over time so that they can take on new roles and responsibilities within the organization.Content: Training programs are usually designed to teach employees specific skills that are needed to perform their jobs effectively. Employee development programs, on the other hand, are designed to provide employees with a broader range of skills and knowledge that will help them grow within the organization.Duration: Training programs are usually shorter in duration than employee development programs. This is because training is focused on specific skills that can be learned quickly, while employee development requires a longer-term approach to learning and development.Methods: There are different methods used in training and employee development. Training programs usually involve a combination of classroom instruction and hands-on practice. Employee development programs, on the other hand, may involve coaching, mentoring, job rotation, and other methods.Conclusion: In conclusion, technology has had a significant impact on Human Resource Management. It has led to more efficiency, cost savings, and improved communication in HRM. Training and employee development are essential processes for the success of any organization. Training programs are focused on teaching employees specific skills that are needed to perform their jobs effectively, while employee development programs are designed to provide employees with a broader range of skills and knowledge that will help them grow within the organization.
Learn more about Human Resource Management at:
brainly.com/question/14419086
#SPJ11
JIT inventory principles are well suited for managing specially ordered products whose demand tend to be less predictable. This statement is:_____________ True False
The statement is False. JIT (Just-in-Time) inventory principles are not well suited for managing specially ordered products with unpredictable demand.
JIT inventory principles are based on the concept of producing and delivering products in the exact quantities and at the precise time they are needed, without excessive inventory levels. This approach aims to minimize waste, reduce costs, and improve efficiency. However, it is more effective for managing products with stable and predictable demand patterns.
Specially ordered products, on the other hand, typically have unique specifications or are customized to meet specific customer requirements. Their demand tends to be less predictable and can vary significantly from one order to another. In such cases, implementing JIT principles becomes challenging.
JIT relies on accurate demand forecasting and tight coordination between suppliers, manufacturers, and distributors to ensure timely delivery. However, when dealing with specially ordered products, demand fluctuations and customization requirements make it difficult to accurately forecast and synchronize the supply chain. The risk of stockouts or delays increases, as the production and delivery process must be tailored for each order.
Therefore, managing specially ordered products with unpredictable demand may require alternative inventory management strategies that account for the unique characteristics and complexities of these products. These strategies may include maintaining safety stock, adopting flexible production processes, and implementing agile supply chain practices to accommodate variations in demand and customization requirements.
Learn more about inventory here:
https://brainly.com/question/31146932
#SPJ11
Calculate the future value if present value (PV)=$1587. interest rate (r)=129% and number of years (t)=17
The future value (FV) would be approximately $87,872.85.
To calculate the future value (FV) using the present value (PV), interest rate (r), and number of years (t), we can use the formula:
FV = PV * (1 + r)^t
In this case, the given values are:
PV = $1587
r = 129% = 1.29 (decimal)
t = 17
By plugging these values into the formula, we get:
FV = $1587 * (1 + 1.29)^17
To calculate the expression inside the parentheses, we add 1 to the interest rate (1 + 1.29) and raise it to the power of the number of years (17).
(1 + 1.29)^17 ≈ 55.4372
Substituting this value back into the formula:
FV = $1587 * 55.4372
Calculating this expression gives us:
FV ≈ $87,872.85
Therefore, the future value (FV) would be approximately $87,872.85. This means that if you invest $1587 at an interest rate of 129% for 17 years, it would grow to approximately $87,872.85.
Learn more about Value from
https://brainly.com/question/27340966
#SPJ11
[4] How does the equation for valuing a bond change if semiannual payments are made? That is, if a $1000 face-value bond has 10% coupon rate, then this bond pays 2 coupon payments in each year and each coupon payment is $50 (= 10%*$1000/2).
(i) Find the value of a 10-year, semiannual payment, 10 percent coupon bond if nominal rd = 10%.
(ii) Find the value of a 10-year, semiannual payment, 10 percent coupon bond if nominal rd = 13%.
(iii) Find the value of a 10-year, semiannual payment, 10 percent coupon bond if nominal rd = 7%
The value of a 10-year, semiannual payment, 10 percent coupon bond with a nominal interest rate (rd) of 10% is $1,000.
In the case of a bond with semiannual coupon payments, the equation for valuing the bond is as follows:
Bond Value = (C / 2) * [1 - (1 + rd/2)^(-2n)] / (rd/2) + (F / (1 + rd/2)^(2n))
Where:
C = Coupon payment per period
rd = Nominal interest rate per period
n = Number of periods (in this case, number of years multiplied by 2)
For a 10-year, semiannual payment bond with a coupon rate of 10%, the coupon payment per period (C) is $50, calculated as (10% * $1,000 / 2). The face value of the bond (F) is $1,000.
Plugging in the values into the formula:
Bond Value = ($50 / 2) * [1 - (1 + 0.10/2)^(-2*10)] / (0.10/2) + ($1,000 / (1 + 0.10/2)^(2*10))
= $1,000
Therefore, the value of the bond is $1,000.
Explanation and calculation for parts (ii) and (iii) would follow the same methodology, with the only difference being the nominal interest rate used in the calculations.
To know more about semiannual payment visit:
https://brainly.com/question/27959266
#SPJ11
Which statement best defines the practice known as fee splitting? Select one:
A. An appropriate method of allowing two physicians to work together in treating a patient
B. The unethical practice in which physicians are paid for referring patients
C. The lowering of the physician's fee as a way to help poor patients
D. The unethical practice of basing the physician's fee on the success of the treatment
The correct answer is B. The unethical practice in which physicians are paid for referring patients.
Fee splitting refers to the unethical practice of physicians receiving payment or compensation in exchange for referring patients to other healthcare providers or facilities. This practice creates a conflict of interest, as it can compromise the objectivity and integrity of medical decision-making.
Physicians should make referrals based on the best interests of their patients, considering their medical needs and the quality of care provided by the referred healthcare provider. When physicians receive financial incentives for referrals, it can undermine the trust and integrity of the healthcare system and potentially lead to unnecessary or inappropriate referrals.
To know more about unethical practice please click :-
brainly.com/question/30160616
#SPJ11
Problem 5-31 (Algorithmic)
Casualty and Theft Losses (LO 5.10)
On January 3, 2021, Carey discovers his diamond bracelet has been stolen. The bracelet had a fair market value and adjusted basis of $12,300.
Assuming Carey had no insurance coverage on the bracelet and his adjusted gross income for 2021 is $82,000, calculate the amount of his theft loss deduction (after any limitations).
Carey's theft loss deduction (after any limitations) is $4,000.
To calculate Carey's theft loss deduction, we need to consider the limitations imposed by the tax rules. One such limitation is the requirement to reduce the loss by $100 and further reduce it by 10% of the adjusted gross income (AGI).
Given:
Fair market value and adjusted basis of the stolen bracelet: $12,300
Adjusted gross income (AGI) for 2021: $82,000
Calculate the loss amount:
Loss amount = Fair market value - Adjusted basis
Loss amount = $12,300 - $0 (assuming no insurance coverage)
Loss amount = $12,300
Apply the limitations:
a. Reduce the loss by $100:
Loss amount after $100 reduction = $12,300 - $100
Loss amount after $100 reduction = $12,200
b. Calculate 10% of the AGI:
10% of AGI = 10% * $82,000
10% of AGI = $8,200
c. Compare the loss amount after $100 reduction to 10% of the AGI:
If the loss amount after $100 reduction is less than 10% of the AGI, then the limitation does not apply. Otherwise, the limitation will reduce the deduction.
In this case, $12,200 is greater than $8,200, so the limitation applies.
Calculate the theft loss deduction after limitations:
Theft loss deduction = Loss amount after $100 reduction - 10% of AGI
Theft loss deduction = $12,200 - $8,200
Theft loss deduction = $4,000
Learn more about Carey's here:
https://brainly.com/question/17254283
#SPJ11
Lessee Company enters into a 6-year finance lease of non-specialized equipment with Lessor Company on January 1, 2020. Lessee has agreed to pay $72,800 annually beginning immediately on January 1, 2020. The lessor estimates the residual value of the equipment to be $13,000 at lease end, but the lessee has not guaranteed the residual value. The economic life of the asset is 7 years. The lessee’s incremental borrowing rate is 7% and the lessor’s implicit rate is not readily determinable by the lessee company. What is the value of the lease liability on January 1, 2020, assuming that the lease is properly classified as a finance lease?
The value of the lease liability on January 1, 2020, assuming the lease is properly classified as a finance lease, would be $368,408.
To calculate the lease liability, we need to determine the present value of the lease payments. The lease payments are $72,800 annually for 6 years, and the incremental borrowing rate is 7%.
Using the formula for present value of an annuity, we can calculate the present value of the lease payments as follows: PV = PMT * [(1 - (1 + r)^(-n)) / r]
Where PV is the present value, PMT is the periodic payment, r is the interest rate, and n is the number of periods.
PV = $72,800 * [(1 - (1 + 0.07)^(-6)) / 0.07]
= $368,408
Therefore, the value of the lease liability on January 1, 2020, would be $368,408. This represents the present value of the future lease payments to be made by the lessee.
Learn more about finance lease here: brainly.com/question/28099518
#SPJ11
On November 5, 2021, OSHA issued an emergency temporary standard (ETS), requiring private employers with 100 or more employees to mandate Covid-19 vaccinations for all employees or, in the alternative, testing and masks for those employees choosing not to vaccinate. The Fifth Circuit Court of Appeals issued an order to stay (stop) the ruling the following day. The opinion of the Fifth Circuit is linked below and must be read before participating in the Discussion Board. Recall that the Fifth Circuit is the Circuit Court (Appellate Court) for Texas, Louisiana, and Mississippi. The Fifth Circuit stated, " the ETS exposes employers to severe financial risk if they refuse or fail to comply, and threatens to decimate their workforce's (and business prospects) by forcing unwilling employees to take their shots, take their tests, or hit the road."
All pending appeals throughout the United States were transferred to the Sixth Circuit where a 2-1 decision overturned the stay. This decision was appealed to the United States Supreme Court and on January 7, 2022, the United States Supreme heard oral arguments regarding challenges to the COVID-19 vaccine mandates. If you have the time, I highly encourage each one of you to listen to the oral arguments in their entirety. It will be a landmark decision for generations to come.
If allowed to take effect, the mandate would force every private business with 100 or more employees to require proof of a negative COVID-19 test on at least a weekly basis or proof of vaccination from each worker. The decision will also affect approximately 17 million health care workers at facilities receiving Medicaid and Medicare funding.
The Supreme Court has made its decision. How did they rule? Read the opinion attached below and then participate in the Discussion Board.
Please discuss the following with your classmates: (At Least 300 Words)
1. Should a government agency (OSHA) un-elected by the American people have the power to mandate your bodily autonomy and privacy in a manner that will affect you both inside and outside of the workplace long after you have left your job?
2. Given that we now know that the COVID-19 vaccine does not prevent you from getting infected with COVID-19 or from spreading the infection and that the recovery rate for most is over 99% do you think an ETS is warranted?
The Supreme Court's ruling on the COVID-19 vaccine mandates is not provided in the given information. However, two discussion points are presented: 1) Whether a government agency like OSHA should have the power to mandate bodily autonomy and privacy.
The information provided does not include the Supreme Court's ruling on the COVID-19 vaccine mandates. It only sets the context and encourages participants to read the opinion and engage in discussions. As a language model, I don't have access to real-time information or the ability to browse the internet. Therefore, I cannot provide the Supreme Court's ruling in this case.
Regarding the first discussion point, opinions may vary on whether a government agency like OSHA should have the power to mandate bodily autonomy and privacy. Some argue that such mandates encroach on personal freedoms and individual rights, while others may argue that public health concerns justify government intervention. The balance between personal autonomy and public health is a complex and debated issue.
Regarding the second discussion point, the justification for an ETS depends on various factors, including the effectiveness of the vaccine in reducing severe illness and hospitalization, the transmission rates of the virus, and the potential risks to vulnerable populations. While the COVID-19 vaccine may not prevent all infections or transmission, evidence suggests that it significantly reduces the severity of illness and helps protect individuals from severe complications. The decision to implement an ETS involves weighing the potential benefits of reducing workplace transmission against the potential burdens on employers and employees.
It is important to note that discussions around these topics often involve ethical, legal, and scientific considerations, and people's opinions may differ based on their individual perspectives, values, and experiences.
know more about COVID-19 :brainly.com/question/30952543
#SPJ11
. The Securities and Exchange Commission appointed the Committee on Accounting Procedure. C> . Financial Accounting Concepts set forth fundamental objectives and concepts that are used in developing C future standards of financial accounting and reporting. . The SEC relies on the AICPA and FASB to regulate the accounting profession and develop and enforce C accounting standards. . FASB Technical Bulletins are more authoritative than FASB Standards and Interpretations. ( ) . The AICPA's Code of Professional Conduct requires that members prepare financial statements in C accordance with generally accepted accounting principles. . Accounting standards are a product of careful logic or empirical findings and are not influenced by political action. . Currently, both U.S. GAAP and the International Financial Reporting Standards are acceptable for international use. . The expectations gap is caused by what the public thinks accountants should be doing and what accountants think they can do. . Ethical issues in financial accounting are governed by the AICPA. ( )
The expectations gap between what the public thinks accountants should be doing and what accountants think they can do exists. Ethical issues in financial accounting are governed by professional organizations such as the AICPA.
The Securities and Exchange Commission (SEC) appointed the Committee on Accounting Procedure (CAP), which, for the first time, established accounting principles and standards.
Accounting principles and standards are used as a foundation for the creation of future standards for financial accounting and reporting by the Financial Accounting Concepts.
The SEC relies on the American Institute of Certified Public Accountants (AICPA) and Financial Accounting Standards Board (FASB) to regulate and enforce accounting standards.
FASB Technical Bulletins have the same level of authority as FASB Standards and Interpretations.
The AICPA's Code of Professional Conduct requires members to follow GAAP while preparing financial statements.
Accounting standards are influenced by political action and empirical findings. Currently, both US GAAP and the International Financial Reporting Standards are accepted for international use.
The expectations gap between what the public thinks accountants should be doing and what accountants think they can do exists. Ethical issues in financial accounting are governed by professional organizations such as the AICPA.
Learn more about Committee on Accounting Procedure here:
https://brainly.com/question/30358012
#SPJ11
How do you calculate TAM (Total available market) for cars and
trucks?
To calculate the Total Available Market (TAM) for cars and trucks, gather data on vehicle registrations, sales, and market trends, summing up the total number of vehicles. Consider market segments, potential growth, and validate estimates with industry experts.
To calculate the Total Available Market (TAM) for cars and trucks, you need to consider various factors and data sources. Here's a general approach:
1. Define the target market: Determine the scope of the market you want to analyze, such as a specific geographical region or a particular segment within the automotive industry (e.g., passenger cars or commercial trucks).
2. Gather market data: Collect reliable data from industry reports, government statistics, trade associations, and market research firms.
Look for information on vehicle registrations, sales figures, and market trends specific to your target market.
3. Calculate market size: Determine the total number of vehicles in the market. Sum up the number of registered cars and trucks in your target market.
Consider both new and used vehicles to get a comprehensive view.
4. Consider market segments: Break down the market into different segments based on vehicle types, brands, price ranges, or any other relevant categorizations.
Estimate the market size for each segment separately using available data or expert insights.
5. Account for potential growth: Analyze market trends, economic indicators, population growth rates, and consumer preferences to project future market growth.
Consider factors like technological advancements, government policies, and industry forecasts.
6. Validate and refine estimates: Review your calculations and assumptions with industry experts, conduct surveys or interviews with potential customers, and seek feedback from stakeholders to validate and refine your TAM estimates.
Remember, TAM is an estimation, and the accuracy of your calculation depends on the quality of data and analysis methods employed.
To know more about Market refer here:
https://brainly.com/question/32014753#
#SPJ11
The following information is from the annual financial statements of Raheem Company. Year 2 Net sales Year 3 $363,000 27,900 Year 1 $ 338,000 22,400 $ 294,000 25,700 Accounts receivable, net (year-end) (1) Compute its accounts receivable turnover for Year 2 and Year 3. (2) Assuming its competitor has a turnover of 20.3, is Raheem performing better or worse at collecting receivables than its competitor? Complete this question by entering your answers in the tabs below. Required 1 Required 2 Compute its accounts receivable turnover for Year 2 and Year 3. Choose Numerator: 7 Accounts Receivable Turnover 1 Accounts receivable turnover 4 Year 2: 1 times Year 3: 7 times Accounts Receivable Turnover Choose Denominator: . M Required 2 > Accounts receivable, net (year-end). 27,900 25,700 22,400 (1) Compute its accounts receivable turnover for Year 2 and Year 3. (2) Assuming its competitor has a turnover of 20.3, is Raheem performing better or worse at collecting receivables than it Complete this question by entering your answers in the tabs below. Required 1 Required 2 Assuming its competitor has a turnover of 20.3, is Raheem performing better or worse at collecting receivables than its M competitor? Is Raheem performing better or worse at collecting receivables than its competitor?
1. The accounts receivable turnover for Year 2 is approximately 12.95 times, and for Year 3 is approximately 14.12 times. 2. Raheem is performing better at collecting receivables than its competitor, as its accounts receivable turnover is higher.
1. To compute the accounts receivable turnover, we divide the net sales by the average accounts receivable. For Year 2, the turnover is calculated as $363,000 / (($27,900 + $22,400) / 2) = 12.95 times. For Year 3, the turnover is calculated as $294,000 / (($25,700 + $22,400) / 2) = 14.12 times. A higher turnover indicates that Raheem is collecting its receivables more frequently.
2. Assuming the competitor's turnover is 20.3, we can compare it to Raheem's turnover. Since Raheem's turnover is lower than the competitor's, it means that Raheem takes longer to collect its receivables compared to its competitor. Therefore, Raheem is performing worse at collecting receivables than its competitor.
Learn more about accounts receivable turnover
https://brainly.com/question/30622660
#SPJ11
According to the reports, identify and compare the stakeholder
groups for Qantas and Woolworths respectively
Qantas and Woolworths are two distinct companies operating in different industries. Qantas is an airline company, while Woolworths is a retail company.
Stakeholders for Qantas may include the following groups:
1. Customers: Passengers who rely on Qantas for air travel services.
2. Employees: Pilots, cabin crew, ground staff, and other employees working for Qantas.
3. Shareholders: Individuals or organizations that hold shares in Qantas and have a financial interest in the company's performance.
4. Suppliers: Companies providing goods and services to Qantas, such as aircraft manufacturers, fuel suppliers, and catering services.
5. Government and Regulatory Bodies: Government entities and regulatory agencies responsible for overseeing the airline industry and enforcing safety regulations.
6. Local Communities: Residents living near Qantas facilities or impacted by the company's operations, such as noise pollution or economic impact.
7. Competitors: Other airlines operating in the same market as Qantas.
8. Environmental Groups: Organizations focused on environmental sustainability and the impact of the airline industry on climate change and pollution.
For Woolworths, typical stakeholder groups may include:
1. Customers: Shoppers who purchase groceries and other products from Woolworths stores.
2. Employees: Staff working in Woolworths stores, distribution centers, and corporate offices.
3. Shareholders: Individuals or organizations that hold shares in Woolworths and have a financial interest in the company's performance.
4. Suppliers: Producers and manufacturers who supply goods to Woolworths, including food and non-food items.
5. Local Communities: Residents living near Woolworths stores and impacted by the company's operations or community initiatives.
6. Government and Regulatory Bodies: Government entities and regulatory agencies responsible for overseeing the retail industry, ensuring compliance with food safety standards, and protecting consumer rights.
7. Competitors: Other retail companies, supermarkets, and grocery stores operating in the same market as Woolworths.
8. Non-Governmental Organizations (NGOs): Organizations focused on social and environmental issues, such as labor rights, fair trade, and sustainable sourcing practices.
It is important to note that the specific stakeholder groups for Qantas and Woolworths may vary based on the company's operations, market presence, and geographical location.
To learn more about Stakeholders Click Here: brainly.com/question/30241824
#SPJ11
In 2018, Marco turned 18 years old. He decided to contribute $5,500 into his TFSA in 2018, and $5,500 in 2019. In 2020, March made another $5,500 contribution to his TFSA. On January 1, 2021, the TFSA had a value of $17,500. L.e. the funds in the TFSA earned $1,000 in interest over the three year period. How much can Marco contribute into his TFSA in 2021? O $5,500 $6,000 O $6,500 $7,000
The correct answer is option (b). Marco can contribute $6,000 into his TFSA in 2021.
The TFSA contribution room accumulates each year for individuals who are eligible to open a TFSA. The contribution room is not affected by the performance or withdrawals from the TFSA. In this case, Marco contributed $5,500 in each of the years 2018, 2019, and 2020, totaling $16,500.
Since Marco contributed $16,500 and the TFSA balance increased to $17,500, it implies that the $1,000 in interest earned is not counted towards his contribution room for 2021. Therefore, Marco can still contribute the maximum annual amount set by the government for 2021, which is $6,000. This means he can make an additional contribution of $6,000 into his TFSA in 2021, bringing his total contributions up to the maximum allowable amount for the year.
Learn more about withdrawals here:
https://brainly.com/question/30481846
#SPJ11
Shareholders lack interst in the eithical performance of an organization. ... true or false
False.
Shareholders can have an interest in the ethical performance of an organization. While their primary concern is often financial returns on their investments, shareholders increasingly recognize the importance of ethical business practices for long-term sustainability and reputation.
Ethical performance can impact a company's brand image, customer loyalty, employee morale, and overall business success. Shareholders who understand these connections may consider the ethical conduct of an organization when making investment decisions or assessing the long-term value of their holdings.
To know more about sustainability please click :-
brainly.com/question/32771548
#SPJ11
Exercise 15.20 (Algo) Computing overhead rate and direct materials LO P3 Tasty Bakery applies overhead based on direct labor costs. The company reports the following costs for the year direct materials, $760,000, direct labor, $4,100,000, and overhead applied, $2,460,000 1. Determine the company's predetermined overhead rate for the year. 2. The ending balance of its Work in Process Inventory account was $82,000, which included $31,000 of direct labor costs. Determine the direct materials costs in ending Work in Process inventory
1. The company's predetermined overhead rate for the year is 60%.
2. The direct materials costs in the ending Work in Process inventory are approximately $287,880.
1. To determine the company's predetermined overhead rate for the year, we divide the overhead applied by the direct labor costs. In this case, the overhead applied is $2,460,000 and the direct labor costs are $4,100,000.
Dividing the overhead applied by the direct labor costs gives us a predetermined overhead rate of
=60% ($2,460,000 / $4,100,000
= 0.6 or 60%).
2. To calculate the direct materials costs in the ending Work in Process inventory, we need to subtract the direct labor costs from the total cost of the Work in Process inventory. In this case, the ending balance of the Work in Process Inventory account is $82,000, and it includes $31,000 of direct labor costs. Therefore, the remaining balance is attributed to direct materials costs. Subtracting the direct labor costs from the ending balance gives us
Direct Materials Costs in Ending WIP = Direct Materials Costs * Direct Labor Proportion
Using the given direct materials costs of $760,000:
Direct Materials Costs in Ending WIP = $760,000 * 0.378
Direct Materials Costs in Ending WIP ≈ $287,880
Therefore, the direct materials costs in the ending Work in Process inventory are approximately $287,880.
as the direct materials costs in the ending Work in Process inventory.
These calculations help the company understand its overhead rate and allocate costs appropriately, as well as determine the value of direct materials in the Work in Process inventory. This information is useful for budgeting, cost control, and decision-making within the bakery.
Learn more about Work in Process inventory here
https://brainly.com/question/31767514
#SPJ11
Case Study Scenario: The Leader in Sheep’s Clothing
The People’s Project is a nonprofit organization with the mission of serving displaced families within their local communities. If a homeless family qualifies for help, the People’s Project moves them into a local People’s Project apartment. Every family receives job counselling, skills training, childcare and assistance in looking for a permanent home.
For 20 years, the People’s Project was headed by Bill Blessing, one of its founders. When Blessing announced his retirement, the board of trustees hired an energetic and experienced non-profit director name, Will Dupree. From his first day at work, Dupree jumped right into the job. He met with residents of People’s Project housing to listen to their needs and complaints. He scheduled meetings with community leaders and politicians to solidify their support. He delivered an eloquent speech at a local church that assists the People’s Project. And when a fire left three families without shelter, he rolled up his sleeves and spent two days helping them move into People’s Project housing. The board was thrilled. The community was delighted with the new charismatic leader.
Meanwhile, back at the People’s Project, the mood was quite different. During his first week on the job, Dupree called a meeting of the senior staff, most of whom had been working with the People’s Project for many years. He told them that to the outside community, he would always be responsive, caring and empowering. Behind closed doors at the People’s Project, he would be a tough, uncompromising director. "I don’t want to be your friend," he said. "You will meet all deadlines and give 110 percent without complaining." Within a few days, they learned that Dupree was a man of his word. One afternoon at 4:30, he marched into a senior staff member’s office and said, "I need a report on how the proposed zoning legislation will affect our buildings and those we’re trying to buy. I need it by noon tomorrow." The staff member worked past midnight to write the report. The next morning, she came in early to make revisions. By noon, the report was sitting on the director’s desk. A day later, she asked the director what he thought of the report. His response was, "Oh, I’ve been busy – haven’t read it yet." As incidents like these increased, senior staff members became frustrated and wary of their new director. His popularity outside headquarters was high so they didn’t think they could do anything. But when Dupree started having "favourites" among the staff members, several veteran employees decided retirement or looking for work elsewhere was a better and healthier option.
Even though the People’s Project had never been more successful, staff members were at a breaking point. At the same time, their commitment and loyalty to the organization and its mission were strong. No one knew what to do or how to respond to the new leader.
Part One: The first perspective your group will take to address the case study is that of a member of the People’s Project board. Answer the first section of questions from this perspective:
You have noticed a change in morale among the senior staff. As you investigate the daily operations, you observe the differences in the public face of Dupree and the Dupree seen by the staff.
Based on your observations, is this a functional group?
What do you see as the primary issues facing the group? Explain your reasoning.
What type(s) of power is Dupree showing in his work with the People’s Project? What impact does each type have on the group with which he is interacting?
From the perspective of a member of the People's Project board, it is evident that there has been a change in morale among the senior staff.
There are noticeable differences in the public and private faces of Will Dupree. Based on the observations, the group is not functional. The primary issue facing the group is a lack of transparency and open communication from Will Dupree. He has created an environment of fear and tension that is leading to decreased morale among the senior staff.
Will Dupree is showing coercive power and personal power. Coercive power is characterized by the ability to punish or withhold rewards to gain compliance. Will Dupree is threatening staff with consequences if they do not meet his expectations.
On the other hand, personal power comes from an individual's characteristics such as personality, charisma, or reputation. Will Dupree is using his personal power to present himself as a charismatic and enthusiastic leader. This type of power helps him to gain support from the public.
The impact of coercive power is that it creates fear and decreases motivation. In contrast, personal power can be used to inspire and motivate employees to work harder.
To know more about Project visit:
https://brainly.com/question/28476409
#SPJ11
1. List and explain the three types of values, and total willing
to pay (TWP). (5 points)
Values are the moral principles or standard of behavior of individuals, which are also referred to as ethical principles. There are three kinds of values: personal values, social values, and cultural values.Personal values are a person's personal beliefs and convictions that form their moral and ethical principles.
For instance, one may believe in honesty, trust, respect, and so on.Social values, on the other hand, are values that a society or a community accepts and adheres to. They are beliefs that society deems necessary to promote an individual's well-being and the society's prosperity. For instance, justice, freedom, equality, democracy, among others.Cultural values are values that arise from a society's culture. Culture refers to the customs, language, beliefs, and traditions that shape people's behavior.
For instance, in some cultures, the elderly are highly respected, while in others, they are not.TWP (Total Willing to Pay) is the total amount that a customer is willing to pay for a specific good or service. It is determined by the amount of disposable income, perceived value, and economic conditions. The TWP helps a business to understand the market's price sensitivity and to price their products or services accordingly.In conclusion, the three types of values are personal values, social values, and cultural values.
Personal values are an individual's beliefs and convictions. Social values are values that society deems necessary to promote the well-being of individuals and the society's prosperity. Cultural values are values that arise from a society's culture. TWP (Total Willing to Pay) is the total amount that a customer is willing to pay for a specific good or service.
to know more about moral principles or standard pls visit-
https://brainly.com/question/30694784
#SPJ11
On May 3, Ivanhoe Company sold $839,000 of merchandise to Tamarisk Company, terms 2/10, n/30. The cost of the merchandise sold was $603,000. Prepare the journal entry to record this transaction on Ivanhoe Company's books using a perpetual inventory system. (Credit account titles are automatically indented when amount is entered. Do not indent manually.) Date May 3 Account Titles and Explanation ____ Debit _____ Credit _____
Titles of Date Accounts and an explanation Credit Debit Receivables due on May 3 (Tamarisk Company) $839,000 $839,000 in sales May 3, $603,000 in cost of goods sold $603,000 in inventory.
Using a perpetual inventory system, the journal entry to document the sale of goods to Tamarisk Company is as follows: Tamarisk Company's debt for the sold goods is shown as a debit to "Accounts Receivable (Tamarisk Company)" of $839,000 . The $603,000 deduction to "Cost of Goods Sold" is the cost of the goods sold. The $603,000 credit to "Inventory" lowers.
Learn more about Credit Debit Receivables here:
https://brainly.com/question/32976996
#SPJ11
