A circular loop in the plane of a paper lies in a 0.45 T magnetic field pointing into the paper. The loop's diameter changes from 17.0 cm to 6.0 cm in 0.53 s.
A) Determine the direction of the induced current.
B) Determine the magnitude of the average induced emf.
C) If the coil resistance is 2.5 Ω, what is the average induced current?

Answer:

Conventions used in SI to indicate units are as follows:

Answer:

The distance is  [tex]d = 1.39 *10^{-4} \ m[/tex]

Explanation:

From the question we are told that

   The wavelength is  [tex]\lambda = 593 \ nm = 593 *10^{-9} \ m[/tex]

    The distance of the screen is   x  =  4.80 m

    The  location of the fourth order bright fringe is  y  =  8.20 cm = 0.082 m

    The order of the fringe is  n  =  4

Generally the position of a fringe with respect to the central fringe is mathematically represented as

           [tex]y = \frac{ n * x * \lambda }{d}[/tex]

Where d is the distance between the slits, so making d the subject

          [tex]d = \frac{\lambda * x * n }{ y }[/tex]

substituting values

          [tex]d = \frac{ 593 *10^{-9} * 4.80 * 4 }{ 0.082 }[/tex]

           [tex]d = 1.39 *10^{-4} \ m[/tex]

Answer:

your question answer is 22°

Answer:

The minimum velocity of the ball during its flight is 22.98 m/s.

Explanation:

The velocity of the ball v = 30 m/s

The angle it makes with the horizontal ∅ = 40°

The minimum velocity of the ball during flight will be the horizontal axis component of the velocity, as acceleration is zero on this axis.

[tex]V_{x}[/tex] = v cos ∅

[tex]V_{x}[/tex]  = 30 cos 40°

[tex]V_{x}[/tex] = 30 x 0.766 = 22.98 m/s

The answer is 3. Observation

Explanation:

The sentence "The popcorn kernels popped twice as fast as the last batch" is the result of observing or measuring the time popcorn kernels require to pop. In this context, the sentence best matches the word "observation" which the term used in the Scientific method to refer to statements that are the result of studying a phenomenon, either through the senses such as sight or through precise instruments that allow scientists to understand numerically variables such as time, speed, temperature, etc.

Answer

123.5 x 10 ^-3 radian

Explanation:

Given the Width of slit a = 1 x 10⁻³ / 200

a = 5x 10⁻⁶ m .

angle at which first order peak is formed

= λ / a (where λ is wavelength and a is width of slit)

given λ = 617.3 x 10⁻⁹ m

a = 5 x 10⁻⁶

θ = 617.3 x 10⁻⁹ / 5 x 10⁻⁶

= 123.5x 10⁻³ radian .

first order peak is formed at an angle of 123.5 x 10⁻³ radian .

Explanation:

Answer:

Explanation:

Bohr's atomic model was replaced by the  modern atomic model because of its limitations, which included :

(a) Only applicable for Hydrogen and like atoms ( He+1, Li+2 )

(b) Couldn't explain Zeeman Effect (splitting of spectral lines due external magnetic field ) and Stark Effect (splitting of spectral lines due to external electric field).

(c) Inconsistent with De-Broglie's Dual nature of matter and Heisenberg Uncertainty principal, etc.

This question is incomplete, the complete question is;

A force of 193 pounds makes an angle of  79°14' with a second force. The resultant of the two forces makes an angle of 27°0' to the first force. Find the magnitudes of the second force and of the resultant.

Answer:

magnitudes of the second force (vector) is 110.84 lb

the resultant force force has a magnitude of 239.85 lb

Explanation:

Given that;

Magnitude of resultant vector R = ?

Direction of resultant vector α = 27°0'

Magnitude of vector p = 193

Magnitude of vector Q = ?

Angle between two vectors ∅ = 79°14'

Using the formula

tan∝ = [ Qsin∅ / P + Qcos∅]

tan27°0' = [ Qsin79°14' / 193 + Qcos79°14' )

we cross multiply

(193tan27°0') + (Qcos79°14'tan27°0' ) = Qsin79°14'

Q = 193tan27°0' / (sin79°14' - cos79°14'tan27°0')

Q = 110.84 lb

Therefore magnitudes of the second force (vector) is 110.84 lb

Now

R = √( p² + Q² + 2PQcos∅ )

R = √( 193² + 110.84² + ( 2 × 193 × 110.84 × cos79°14'))

R = 239.85 lb

Therefore the resultant force force has a magnitude of 239.85 lb

Answer:

m = 22,877 kg / s

Explanation:

Let's solve this exercise in parts, first look for the amount of heat generated by the plant and then the amount of water to dissipate this heat

The plant generates a power of 300 MW at a rate of 40%, let's use a direct ratio rule to find the heat. If the power is 400 MW it corresponds to 40%, what heat (Q) corresponds to the other 60%

           Q = 300 60% / 40%

           Q = 450 MW

having the amount of heat generated we can use the calorimeter equation,

           Q = m [tex]c_{e}[/tex] [tex](T_{f} - T_{o})[/tex]

            m = Q / c_{e} (T_{f} - T_{o})

let's use the maximum temperature change allowed

           (T_{f} - T_{o}) = 5

the specific heat of sea water is 3934 J / kg ºC, note that it is less than that of pure water, due to the salts dissolved in sea water

power and energy are related

              W = Q / t

               Q = W t

let's calculate

             m = 450 10⁶ / (3934 5)

             m = 22,877 kg / s

Answer: 56°

Explanation:

Brewster's angle refers to the angle at the point where light of a certain polarization passes through a transparent dielectric surface and is transmitted perfectly such that no reflection is made.

The formula is;

[tex]= Tan^{-1} (\frac{n_{2} }{n_{1}} )[/tex]

[tex]= Tan^{-1} (\frac{1.5 }{1} )[/tex]

= 56.30993247

= 56°

Answer:

Atoms are the particles that all matter is made from. When two or more kinds of atoms combine, they form pure elements

The answer is option A

Answer:

its molecues

Explanation:

Answer:

Explanation:

volume of water being lifted

= π r² h , where r is radius of cylinder and h is height of cylinder

= 3.14 x5² x 10

= 785 m³

mass of water = 785 x 10³ kg

mass of this much of water is lifted so that its centre of mass is lifted by height

10 / 2 = 5m .

So work done = mgh , m is mass of water , h is displacement of centre of mass and g is acceleration due to gravity

= 785 x 10³ x 9.8 x 5

= 38.465 x 10⁶ J  

Answer:

Its traveling in the +x direction

Explanation:

The E-field is in the +y-direction, and the B-field is in the +z-direction, so it must be moving along the +x-direction, since the E-field, B-field and the direction of moving are all at right angles to each other.

The electromagnetic wave is travelling in the +x direction.

Electromagnetic waves are waves formed as a result of vibrations between an electric field and a magnetic field.

Given that:

Ey = E0 sin(kx - ωt)

Hence the electric field is moving in the +y direction.

Also, Bz = B0 sin(kx - ωt)

Hence the magnetic field is moving in the +z direction

Electric fields and magnetic fields (E and B) in an EM wave are perpendicular to each other and are also perpendicular to the direction of propagation of the wave.

Therefore the direction of the wave is travelling in the +x direction.

Find out more at: https://brainly.com/question/25559554

Answer:

The peak output voltage of this generator is 314.2 V.

Explanation:

Given;

the number of turns of the coil, N = 1000 turns

area of the coil, A = 0.001 m²

angular frequency of the coil, f = 100 cycles/seconds

magnitude of the magnetic field, B = 0.5 T

The peak output voltage of this generator is given by;

E = NBAω

Where;

ω is the angular velocity = 2πf

E = NBA(2πf)

E = 1000 x 0.5 x 0.001(2 x π x 100)

E = 314.2 V

Therefore, the peak output voltage of this generator is 314.2 V.

Answer:

Explanation:

Given data

voltage supplied Vs= 1.5 volts

resistance R1= 1000 ohms

resistance R2= 500 ohms

The total resistance is

Rt= 1000+ 500

Rt= 1500 ohms

The current I is given as

[tex]I= \frac{Vs}{Rt} \\\\ I= \frac{1.5}{1500} = 0.001mA[/tex]

Voltage across R1

[tex]VR1= Vs(\frac{R1}{R1+R2} )=1.5(\frac{1000}{1000+500} )= 1.5(\frac{1000}{1500} )\\ \\\ VR1= 1v[/tex]

Voltage across R2

[tex]VR2= Vs(\frac{R2}{R1+R2} )=1.5(\frac{500}{1000+500} )= 1.5(\frac{500}{1500} ) \\\ VR2=0.5v[/tex]

In series connection the current is the same for all components while the voltage divides across all components,the voltages consumed by each individual resistance is equal to the source voltage.

Answer:

The percentage change in resistance of the wire is 69%.

Explanation:

Resistance of a wire can be determined by,

R = (ρl) ÷ A

Where R is its resistance, l is the length of the wire, A its cross sectional area and ρ its resistivity.

When the wire is stretched, its length and area changes but its volume and resistivity remains constant.

[tex]l_{o}[/tex] = 1.3l, and [tex]A_{o}[/tex] = [tex]\frac{A}{1.3}[/tex]

So that;

[tex]R_{o}[/tex] = (ρ[tex]l_{o}[/tex]) ÷ [tex]A_{o}[/tex] = (ρ × 1.3l) ÷ ([tex]\frac{A}{1.3}[/tex])

    = (1.3lρ) ÷ ([tex]\frac{A}{1.3}[/tex])

    = [tex](1.3)^{2}[/tex] × [(ρl) ÷ A]

   = 1.69R               (∵ R = (ρl) ÷ A)

[tex]R_{o}[/tex] = 1.69R

Where [tex]R_{o}[/tex] is the new resistance, [tex]l_{o}[/tex] is the new length, and [tex]A_{o}[/tex] is the new area after stretching the wire.

The change in resistance of the wire = [tex]R_{o}[/tex] - R

                                      = 1.69R  - 1R

                                      = 0.69R

The percentage change in resistance = [tex]\frac{0.69R}{R}[/tex] × 100

                                                               = 0.69 × 100

                                                              = 69%

The percentage change in resistance of the wire is 69%.

Answer:

13.33 rad/s

Explanation:

Applying,

v = ωr......................... Equation 1

Where v = linear speed, ω = angular speed and r = radius.

Note that,

r = d/2................. Equation 2

Where d = diameter of the wheel.

Substitute equation 2 into equation 1

v = ωd/2............... Equation 3

make ω the subject of the equation

ω = 2v/d................ Equation 4

Given: v = 4 m/s, d = 60 cm = 0.6 m

Substitute these values into equation 4

ω = 2(4)/0.6

ω = 13.33 rad/s

Answer:

1) θ = 0.00118 rad, 2)  θ = 0.00236 rad , 3) I / I₀ = 0.1738, 4)  I / Io = 0.216

Explanation:

In the double-slit interference phenomenon it is explained for constructive interference by the equation

          d sin θ = m λ

1) the first order maximum occurs for m = 1

           sin θ = λ  / d

           θ = sin⁻¹ λ  / d

let's reduce the magnitudes to the SI system

           λ  = 520 nm = 520 10⁻⁹  θ = 0.00118 radm

           d = 0.440 mm = 0.440 10⁻³ m ³

let's calculate

           θ = sin⁻¹ (520 10⁻⁹ / 0.44 10⁻³)

            θ = sin⁻¹ (1.18 10⁻³)

            θ = 0.00118 rad

2) the second order maximum occurs for m = 2

            θ = sin⁻¹ (m λ  / d)

            θ = sin⁻¹ (2 5¹20 10⁻⁹ / 0.44 10⁻³)

            θ = 0.00236 rad

3) To calculate the intensity of the interference spectrum, the diffraction phenomenon must be included, so the equation remains

          I = I₀ cos² (π d sin θ /λ ) sinc² (pi b sin θ /λ )

where the function sinc = sin x / x

and b is the width of the slits

we caption the values

             x = π 0.310 10⁻³ sin 0.00118 / 520 10⁻⁹)

             x = 2.21

            I / I₀ = cos² (π 0.44 10⁻³ sin 0.00118 / 520 10⁻⁹) (sin (2.21) /2.21)²

remember angles are in radians

            I / I₀ = cos² (3.0945) [0.363] 2

            I / I₀ = 0.9978 0.1318

            I / I₀ = 0.1738

4) the maximum second intensity is

            I / I₀ = cos² (π d sinθ / λ) sinc² (πb sin θ /λ)

            x =π 0.310 10⁻³ sin 0.00236 / 520 10⁻⁹)

            x = 4.41

            I / Io = cos² (π 0.44 10⁻³ sin 0.00236 / 520 10⁻⁹) (sin 4.41 / 4.41)²

            I / Io = cos² 6.273    0.216

            I / Io = 0.216

.

Answer: the same as Lily's

Explanation:

Angular velocity has to do with the speed at which an object will be able to rotate. We are informed that Bob and Lily are riding on a merry-go-round.

Since we are further told that Bob rides on a horse near the outer edge of the circular platform, and Lily rides on a horse near the center of the circular platform and that he merry-go-round is rotating at a constant angular speed.

Based on the above analysis, Bob's angular speed will be thesame as that of Lily.

Answer:

α = π/3

β = π/6

Explanation:

Use arc length equation to find the sum of the angles.

s = rθ

π/20 m = (0.1 m) (α + β)

π/2 = α + β

Draw a free body diagram for each sphere.  Both spheres have three forces acting on them:

Weight force mg pulling down,

Normal force N pushing perpendicular to the surface,

and tension force T pulling tangential to the surface.

Sum of forces on A in the tangential direction:

∑F = ma

T − m₁g sin α = 0

T = m₁g sin α

Sum of forces on B in the tangential direction:

∑F = ma

T − m₂g sin β = 0

T = m₂g sin β

Substituting:

m₁g sin α = m₂g sin β

m₁ sin α = m₂ sin β

(1 kg) sin α = (√3 kg) sin (π/2 − α)

1 sin α = √3 cos α

tan α = √3

α = π/3

β = π/6

Answer:

a) The value of g at such location is:

[tex]g=9.8005171\,\frac{m}{s^2}[/tex]

b) the period of the pendulum with the length is 0.970 m is:

[tex]T=1.9767 sec[/tex]

Explanation:

Recall the relationship between the period (T) of a pendulum and its length (L) when it swings under  an acceleration of gravity g:

[tex]L=\frac{g}{4\,\pi^2} \,T^2[/tex]

a) Then, given that we know the period (2.0 seconds), and the pendulum's length (L=0.993 m), we can determine g at that location:

[tex]g=\frac{4\,\pi^2\,L}{T^2}\\g=\frac{4\,\pi^2\,0.993}{(2)^2}\\g=\pi^2\,(0.993)\,\frac{m}{s^2} \\g=9.8005171\,\frac{m}{s^2}[/tex]

b) for this value of g, when the pendulum is shortened to 0.970 m, the period becomes:

Answer:

The number of windings is 1.

Explanation:

The radius of the solenoid = 8.0 cm = 0.08 m

Length of the solenoid = 45.0 cm = 0.45 m

number of turn = ?

circumference of each winding = 2πr = 2 x 3.142 x 0.08 = 0.503 m

The number of windings = (Length of the solenoid)/(circumference of each winding)

==> 0.45/0.503 = 0.89 ≅ 1

volume of balloon

= 4/3 T R3

= 4/3 x 3.14 x 6.953

= 1405.47 m3

uplift force

= volume of balloon x density of air x 9.8

= = 1405.47 x 1.29 x 9.8

= 1813.05 x 9.8 N

weight of helium gas

= volume of balloon x density of helium x

9.8

= 1405.47 x .179 x 9.8

= 251.58 x 9.8 N

Weight of other mass = 930 x 9.8 N Total weight acting downwards

= 251.58 x 9.8 +930 x 9.8

= 1181.58 x 9.8 N

If W be extra weight the uplift can balance

1181.58 × 9.8 + W × 9.8 = 1813.05 * 9.8

1181.58+W=1813.05

W= 631.47 kg

Answer:

a)  q = 7.5 10⁻² C , b) 190 J , c)  I₀ = 50 A , d) 1.5 mC

Explanation:

The expression for capacitance is

            C = q / DV

            q = C DV

let's reduce the magnitudes to the SI system

            ΔV = 5 kV = 5000 V

            C = 15 μF = 15 10⁻⁶ F

              t = 90 μs = 90 10⁻⁶ s

            q = 15 10⁻⁶ 5000

            q = 7.5 10⁻² C

b) the energy in a capacitor is

             U = ½ C ΔV²

             U = ½ 15 10⁻⁶ 5000²

             U = 1,875 10² J

answer  190 J

c) At the moment the discharge begins, all the current is available and it decreases with time,

whereby

                V = I R

in the first instant I = Io

                I₀ = V / R

                I₀ = 5000/100

                I₀ = 50 A

but this is for a very short time

answer 50 A

d) The definition of current is

            i = dq / dt

in this case they give us the total current and the total time, so we can find the total charge

            i = q / t

            q = i t

            q = 17 90 10⁻⁶

            q = 1.53 10⁻³ C

answer is 1.5 mC

Yeah

All they are all correct

Answer:

Kidney

Explanation:

One of the main function of the kidney is to maintain the homeostasis of sodium and potassium ions in the blood and body.

Aldosterone is a key steroid hormone that balances sodium and potassium ions in the blood and body fluid. Potassium and sodium ions generate electric impulse in the body which helps to perform different activities such as muscles flexing.

Kidney function for reabsorption and secretion, in which reabsorption of Na is done nd balances the sodium and potassium in the blood and body.

Answer:

El sistema de posicionamiento global (conocido mundialmente como GPS) podría utilizarse para proponer recorridos alternativos para llegar a un lugar específico, como un parque, a través de la creación de un recorrido guiado por una aplicación móvil con diferentes rutas de acceso al lugar.

Así, por ejemplo, se crearían diferentes rutas de acceso desde un punto A hasta un punto B, teniendo en cuenta factores como: rapidez, congestión vehicular, pago o no de peajes, posibilidad de acceso a pie y determinados factores extra que influyan en la forma de llegar al lugar. Todo ello plasmado en un mapa interactivo en el cual se señalen las rutas disponibles mediante el marcado del mapa en cuestión.

Explanation:

(a) Given that,

Area of a parallel plate capacitor, [tex]A=1.8\ cm^2=1.8\times 10^{-4}\ m^2[/tex]

The separation between the plates of a capacitor, [tex]d=0.01\ mm = 10^{-5}\ m[/tex]

The dielectric constant of, k = 2.1

When a dielectric constant is inserted between parallel plate capacitor, the capacitance is given by :

[tex]C=\dfrac{k\epsilon_o A}{d}[/tex]

Putting all the values we get :

[tex]C=\dfrac{2.1\times 8.85\times 10^{-12}\times 1.8\times 10^{-4}}{0.01\times 10^{-3}}\\\\C=3.345\times 10^{-10}\ F\\\\C=334.5\ pF[/tex]

(b) We know that the Teflon has dielectric strength of 60 MV/m, [tex]E=60\times 10^6\ V/m[/tex]

The voltage difference between the plates at this critical voltage is given by :

[tex]V=Ed\\\\V=60\times 10^6\times 0.01\times 10^{-3} \\\\V=600\ V[/tex]

or

V = 0.6 kV

We have that the Capacitance and potential difference is mathematically given as



Question Parameters:

having a plate area of 1.80 cm2 and a plate separation of 0.010 0 mm

having a plate area of 1.80 cm2 and a plate separation of 0.010 0 mm.

a)

Generally the equation for the Capacitance  is mathematically given as

[tex]C=\frac{ke_0A}{d}\\\\Therefore\\\\C=\frac{2.1*1.80e-4*8.85e12}{0.01e-3}\\\\[/tex]

C=334.68pF

b)

Generally the equation for the Capacitance  is mathematically given as

[tex]Vmax=\frac{Q}{C}[/tex]

Where

Q is the charge on the plates, and hence not given

Therefore, maximum potential difference is

[tex]Vmax=\frac{Q}{334.68pF}[/tex]

For more information on potential difference visit

https://brainly.com/question/14883923