A compound is found to contain 27.29 % carbon and 72.71 % oxygen by weight. To answer the questions, enter the elements in the order presented above. 1. What is the empirical formula for this compound

Answer:

14.297 g

Explanation:

From the question;

1 mo of the compound requires 1320.0 kJ

From the molar mass;

1 ml of the compound weighs 30.55g

How many grams requires 617.30kJ?

1 ml = 1320

x mol = 617.30

x = 617.30 / 1320

x = 0.468 mol

But 1 mol = 30.55

0.468 mol = x

x = 14.297 g

Answer:

[tex]\% m/m= 14.3\%[/tex]

Explanation:

Hello,

In this case, the by mass percent is computed as shown below:

[tex]\% m/m=\frac{m_{solute}}{m_{solute}+m_{solvent}} *100\%[/tex]

Whereas the solute is the sugar and the solvent the water, therefore, the concentration results:

[tex]\% m/m=\frac{63g}{63g+378g} *100\%\\\\\% m/m= 14.3\%[/tex]

Best regards.

Answer:

[tex]Ksp=1.07x10^{-8}[/tex]

Explanation:

Hello,

In this case, the dissociation reaction is:

[tex]PbI_2(s)\rightleftharpoons Pb^{2+}(aq)+2I^-(aq)[/tex]

For which the equilibrium expression is:

[tex]Ksp=[Pb^{2+}][I^-]^2[/tex]

Thus, since the saturated solution is 0.064g/100 mL at 20 °C we need to compute the molar solubility by using its molar mass (461.2 g/mol)

[tex]Molar solubility=\frac{0.064g}{100mL}*\frac{1000mL}{1L}*\frac{1mol}{461.2g}=1.39x10^{-3}M[/tex]

In such a way, since the mole ratio between lead (II) iodide to lead (II) and iodide ions is 1:1 and 1:2 respectively, the concentration of each ion turns out:

[tex][Pb^{2+}]=1.39x10^{-3}M[/tex]

[tex][I^-]=1.39x10^{-3}M*2=2.78x10^{-3}M[/tex]

Thereby, the solubility product results:

[tex]Ksp=(1.39x10^{-3}M)(2.78x10^{-3}M)^2\\\\Ksp=1.07x10^{-8}[/tex]

Regards.

Solubility product constant for the product of lead(II) iodide is [tex]\bold { 1.07x 10^-^8}[/tex].

The dissociation reaction for lead (II) iodide

[tex]\bold {Pb I^2 (s) \leftrightharpoons Pb^2^+ + 2I^- }[/tex]

Solubility product constant at equilibrium.

[tex]\bold {Ksp = [Pb^2^++[I^-]^2}[/tex]

The molar solubility of the substance can be calculated by using the molar mass,

[tex]\bold {s = \dfrac {0.064}{100 mL} \times 461.2 g/mol = 1.39x10^-^3}[/tex]

Molar ratio between between PbI to lead and iodide ions is 1:1 and 1:2 respectively.

Thus Ksp will be,

[tex]\bold {Ksp =(1.39x10^-^3)(2.78x10^-^3 )^2}\\\\\bold {Ksp = 1.07x 10^-^8}[/tex]

Therefore, solubility product constant for the product of lead(II) iodide is [tex]\bold { 1.07x 10^-^8}[/tex].

To know more about  solubility product constant,

https://brainly.com/question/1419865

Answer:

0.327 M

Explanation:

Step 1: Write the balanced equation

2 NH₃(g) ⇄ N₂(g) + 3H₂(g)

Step 2: Make an ICE chart

        2 NH₃(g) ⇄ N₂(g) + 3 H₂(g)

I              x             0            0

C          -2y            +y         +3y

E         x-2y             y           3y

Step 3: Find the value of y

The concentration of N₂ at equilibrium is 0.0161 M. Then,

y = 0.0161

Step 4: Find the value of x

The concentration of NH₃ at equilibrium is 0.295 M. Then,

x-2y = 0.295

x-2(0.0161) = 0.295

x = 0.327

Answer:

1, C, Xe 2, B,He

Explanation:

1, cause as u go down a group the boiling point increases.

2, boiling point of single element is greater than a compound

According to  periodic trends in periodic table boiling point increases down the  group and hence Xe has highest boiling point and more amount of heat is required to boil an element hence He has highest boiling point.

Periodic table is a tabular arrangement of elements in the form of a table. In the periodic table, elements are arranged according to the modern periodic law which states that the properties of elements are a periodic function of their atomic numbers.

It is called as periodic because properties repeat after regular intervals of atomic numbers . It is a tabular arrangement consisting of seven horizontal rows called periods and eighteen vertical columns called groups.

Elements present in the same group have same number of valence electrons and hence have similar properties while elements present in the same period show gradual variation in properties due to addition of one electron for each successive element in a period.

Learn more about periodic table,here:

https://brainly.com/question/11155928

#SPJ2

Explanation:

The whole process of titration involves finding the concentration of a solution (usually an acid or base) by adding (titrating) it to a solution(acid or base) with a known concentration.

The solution of unknown concentration (the analyte) is usually placed in an flask, while the solution of known concentration (titrant) is placed in a burette and slowly added to the flask.

Explanation:

they are called hydrocarbyls

pls mark me brainliest

Answer:

The first carbon atom that attaches to the functional group is referred to as the alpha carbon.

Answer: It's the anode broski (B)

Explanation: I'm taking the Chem summer course too broski, this was the correct answer. Cheers broski

The graph is not given in the question, so, the required graph is attached below:

Answer:

According to the graph, the relationship between the density of the sugar solution and the concentration of the sugar solution is directly proportional to each other as they both are increasing exponentially.

The graph shows that, the density of sugar solution will increase with the increase in concentration of sugar in the solution.

Answer:

[tex]0.033g[/tex]

Explanation:

Hello,

In this case, since 11 mg per kilogram of body weight has the given lethality, the mg that turn out lethal for a chicken weighting 3 kg is computed by using a rule of three:

[tex]11mg\longrightarrow 1kg\\\\x\ \ \ \ \ \ \longrightarrow 3kg[/tex]

Thus, we obtain:

[tex]x=\frac{3kg*11mg}{1kg}\\ \\x=33mg[/tex]

That in grams is:

[tex]=33mg*\frac{1g}{1000mg} \\\\=0.033g[/tex]

Regards.

Answer:

Ka = 6.87x10⁻⁵

Explanation:

The equilibrium of benzoic acid in water is:

C₆H₅COOH(aq) + H₂O(l) ⇄ C₆H₅COO⁻(aq) + H₃O⁺(aq)

The equilibrium constant, Ka, is:

Ka = [C₆H₅COO⁻] [H₃O⁺] / [C₆H₅COOH]

The initial concentration of benzoic acid is 0.425M. In equilibrium its concentration is 0.425M - X and [C₆H₅COO⁻] [H₃O⁺] = X.

X is the reaction coordinate. How many acid produce C₆H₅COO⁻ and H₃O⁺ until reach equilibrium.

Concentrations in equilibrium are:

pH is defined as -log [H₃O⁺]. As pH = 2.270

2.270 = -log [H₃O⁺]

10^-2.270 = [H₃O⁺]

5.37x10⁻³M = [H₃O⁺] = X.

Replacing, concentrations in equilibrium are:

[C₆H₅COOH] = 0.425M - 5.37x10⁻³M = 0.4196M

[C₆H₅COO⁻] = 5.37x10⁻³M

[H₃O⁺] = 5.37x10⁻³M

Ka = [5.37x10⁻³M] [5.37x10⁻³M] / [0.4196M]

Answer:

8.68

Explanation:

pOH = 8.68

all you need is contained in the sheet

Answer:

Approximately [tex]8.68[/tex].

Explanation:

The [tex]\rm pOH[/tex] of a solution can be found from the hydroxide ion concentration [tex]\rm \left[OH^{-}\right][/tex] with the following equation:

[tex]\displaystyle \rm pOH = -\log_{10} \rm \left[OH^{-}\right][/tex].

On the other hand, the ion-product constant of water, [tex]K_{\text{w}}[/tex], relates the hydroxide ion concentration [tex]\rm \left[OH^{-}\right][/tex] of a solution to its hydronium ion concentration [tex]\rm \left[{H_3O}^{+}\right][/tex]:

[tex]K_\text{w} = \rm \left[{H_3O}^{+}\right] \cdot \rm \left[OH^{-}\right][/tex].

Hence the [tex]\rm \left[OH^{-}\right][/tex] of this solution:

[tex]\begin{aligned}\left[\mathrm{OH}^{-}\right] &= \frac{K_\text{w}}{\rm \left[{H_3O}^{+}\right]} \\ &= \frac{1.0 \times 10^{-14}}{4.8 \times 10^{-6}}\; \rm mol\cdot L^{-1} \approx 2.08333 \times 10^{-9}\; \rm mol\cdot L^{-1}\end{aligned}[/tex].

Therefore, the [tex]\rm pOH[/tex] of this solution would be:

[tex]\begin{aligned}\rm pOH &= -\log_{10} \rm \left[OH^{-}\right] \\ &\approx -\log_{10} \left(4.8 \times 10^{-6}\right) \approx 8.68\end{aligned}[/tex].

Note that by convention, the number of decimal places in [tex]\rm pOH[/tex] should be the same as the number of significant figures in [tex]\rm \left[OH^{-}\right][/tex].

For example, because the [tex]\rm \left[{H_3O}^{+}\right][/tex] from the question has two significant figures, the [tex]\rm \left[OH^{-}\right][/tex] here also has two significant figures. As a result, the [tex]\rm pOH[/tex] in the result should have two decimal places.

Answer:

1.6x10¹¹ = Kc

Explanation:

For the reaction:

AgCl(s) + 2CN⁻(aq) ⇄ Ag(CN)₂⁻(aq) + Cl⁻(aq)

Kc is defined as:

Kc = [Ag(CN)₂⁻] [Cl⁻] / [CN⁻]²

Ksp of AgCl is:

AgCl(s) ⇄ Ag⁺(aq) + Cl⁻(aq)

Where Ksp is:

Ksp = [Ag⁺] [Cl⁻] = 1.6x10⁻¹⁰

In the same way, Kf of Ag(CN)₂⁻ is:

Ag⁺(aq) + 2CN⁻ ⇄ Ag(CN)₂⁻

Kf = [Ag(CN)₂⁻] / [CN⁻]² [Ag⁺] = 1.0x10²¹

The multiplication of Kf with Ksp gives:

[Ag⁺] [Cl⁻] *  [Ag(CN)₂⁻] / [CN⁻]² [Ag⁺] = Ksp*Kf

[Ag(CN)₂⁻] [Cl⁻] / [CN⁻]² = Ksp*Kf

Obtaining the same expression of the first reaction

That means Ksp*Kf = Kc

1.6x10⁻¹⁰*1.0x10²¹ = Kc

Answer:

See explanation.

Explanation:

Hello,

In this case, we can realize that water has a very simple atomic structure which consists of two hydrogen atoms bonded to one oxygen atom. The nature of the atomic structure of water causes its molecules to have unique electrochemical properties. The hydrogen side of the water molecule has a slight positive charge whereas at the other side of the molecule a negative charge exists. This molecular polarity causes water to be a powerful solvent and is responsible for its strong surface tension.

Moreover, water is involved in several both inorganic and organic chemical reactions leading to hydration, for example, the conversion of alkenes to alcohols, the hydrolysis of acyl halides, anhydrides, esters and amides to carboxylic acids and the hydration of a raft of inorganic salts that exist as hydrates only, such as copper (II) sulfate pentahydrate and so.

Best regards.

Answer:

105/22*(1.251-0.620)

105/22*0.631

4.772*0.631

3.011132

Hope it helps

Answer:

3.0

Explanation:

First, complete the operations inside the parenthesis according to the normal rules for significant figures. Because there are subsequent calculations, keep at least one extra significant figure when possible: (4.7727) × (0.631).

The final product will be rounded to two significant figures because it can’t be more precise than the least precise number in the problem, 22. The final product is 3.0.

Answer:

It will react with water

Explanation:

I know this is an older question, but I just wanted to provide the correct answer.

Since we are dealing with a weak base, and the acid is somewhat stronger, it will react with the water molecules to produce hydronium, which will affect the pH of the solution.

The conjugate base of a weak acid affect pH because it will react with hydronium ion.

A weak acid is an acid that does not dissociate completely in water. On the other hand, a strong acid achieves almost 100% dissociation in water.

Acids dissociate in water to yield the hydronium ion and a conjugate base. For instance, the weak acid, acetic acid is dissociated as follows;

CH3COOH(aq) + H2O(l) ⇄ CH3COO-(aq) + H3O+(aq)

We can see that the conjugate base( CH3COO-) could react with the hydronium ions thereby moving the equilibrium position to the left hand side and affecting the pH by decreasing the hydronium ion concentration.

Learn more: https://brainly.com/question/8592296

Missing parts;

Why will the conjugate base of a weak acid affect pH? Select the correct answer below: O it will react with hydroxide O it will react with water O it will react with hydronium O none of the above

Answer:

the mass does not change

Explanation:

Answer: [tex]\Delta H = -272.25kJ[/tex] for 1 mole of NO.

Explanation: Hess' Law of Constant Summation or Hess' Law states that the total enthalpy change of a reaction with multiple stages is the sum of the enthalpies of all the changes.

For this question:

1) [tex]N_{2}_{(g)} + 3H_{2}_{(g)}[/tex] => [tex]2NH_{3}_{(g)}[/tex]       [tex]\Delta H=-92kJ[/tex]

2) [tex]4NH_{3}_{(g)}+5O_{2}_{(g)}[/tex] => [tex]4NO_{(g)}+6H_{2}O_{(g)}[/tex]       [tex]\Delta H=-905kJ[/tex]

Amonia ([tex]NH_{3}_{(g)}[/tex]) appeares as product in the first equation and as reagent in the 2 reaction, so when adding both, there is no need to inverse reactions. However, in the 2nd, there are 4 moles of that molecule, so to cancel it, you have to multiply by 2 the first chemical equation and enthalpy:

[tex]2N_{2}_{(g)} + 6H_{2}_{(g)}[/tex] => [tex]4NH_{3}_{(g)}[/tex]     [tex]\Delta H=-184kJ[/tex]

Now, adding them:

[tex]2N_{2}_{(g)} + 6H_{2}_{(g)}[/tex] => [tex]4NH_{3}_{(g)}[/tex]     [tex]\Delta H=-184kJ[/tex]  

[tex]4NH_{3}_{(g)}+5O_{2}_{(g)}[/tex] => [tex]4NO_{(g)}+6H_{2}O_{(g)}[/tex]       [tex]\Delta H=-905kJ[/tex]

[tex]2N_{2}_{(g)}+6H_{2}_{(g)}+5O_{2}_{(g)}=>4NO_{(g)}+6H_{2}O_{(g)}[/tex]  [tex]\Delta H = -185-905[/tex]

[tex]2N_{2}_{(g)}+6H_{2}_{(g)}+5O_{2}_{(g)}=>4NO_{(g)}+6H_{2}O_{(g)}[/tex]  [tex]\Delta H = -1089kJ[/tex]

Note net enthalpy is for the formation of 4 moles of nitric oxide.

For 1 mole:

[tex]\Delta H = \frac{-1089}{4}[/tex]

[tex]\Delta H=-272.25kJ[/tex]

To form 1 mol of nitric oxide from nitrogen, oxygen and hydrogen, net change in enthalpy is [tex]\Delta H=-272.25kJ[/tex].

Answer:

influencing consumer tastes

increasing product awareness

promoting company branding

Explanation:

Advertising is basically a form of communication using creative ideas and communicating benefits of the products. Advertising plays a very crucial role in product business and some of the important uses of advertising are as follows:

Hence, the correct options are:

Answer:

1,3,4

Explanation:

I took the test

Answer:

B. 58°C

Explanation:

Hello,

In this case, the relationship among heat, mass, specific heat and temperature for water is mathematically by:

[tex]Q=mCp\Delta T=mCp(T_2-T_1)[/tex]

In such a way, solving for the final temperature [tex]T_2[/tex] we obtain:

[tex]T_2=T_1+\frac{Q}{mCp}[/tex]

Therefore, we final temperature is computed as follows, considering that the involved heat is negative as it is lost for water:

[tex]T_2=85\°C+\frac{-15kJ*\frac{1000J}{1kJ} }{135g*4.184\frac{J}{g\°C} }\\\\T_2=58\°C[/tex]

Thereby, answer is B. 58°C .

Regards.

Answer:

Water when it freezes into ice

Explanation:

Most liquids expand when heated and contract when cooled, water behaves in an anomalous fashion. Water rather expands when cooled and contracts when heated.

Water usually contracts on cooling from any temperature until 4°C, after 4°C, the water begins to expand rapidly. Hence water has its least volume at 4°C and increases rapidly afterwards.

Thus the largest volume change for water occurs during freezing since it expands when cooled.

Answer:

See figure 1

Explanation:

For this reaction, we have the production of a carbanion as the first step. The base "ethoxide" can remove a hydrogen-producing a negative charge in the carbon (enolate anion 1). Then this negative charge can attack the carbon of the carbonyl group in the molecule acetaldehyde and the tetrahedral intermediate 2 is form. In the next step, we have the protonation of the oxygen to produce alcohol 3. A continuation we have the hydrolysis of the ester groups to produce the Dicarboxyamino alcohol and finally, we have a decarboxylation reaction we will produce the amino acid Threonine.

To further explanations see figure 1

I hope it helps!

Answer: [tex]NF_3[/tex]

Explanation:

Geometrical symmetry of the molecule and the polarity of the bonds determine the polarity of the molecule.

The molecule that has zero dipole moment that means it is a geometrically symmetric molecule and the molecule which has some net dipole moment means it is a geometrically asymmetric molecule.

As the molecule is symmetric, the dipole moment will be zero as dipole moments cancel each other and the molecule will be non-polar.

As the molecule is asymmetric, the dipole moment will not be zero and the molecule will be polar.

Example: [tex]NF_3[/tex]

Thus, we can say that [tex]NF_3[/tex] is a polar molecule.

Answer:

THE FINAL TEMPERATURE OF WATER IS -4.117 °C

Explanation:

Mass of the aluminium = 50 g

c = 0.88 J/g C

Initial temperature of aluminium = 225 °C

Volume of water = 100 ml

Density of water = 1 g/ml

Mass of water = density * volume of water

Mass of water = 1 * 100 = 100 g of water

Initial temperature of water = 20 C

It is worthy to note that the heat of a system is constant and conserved as no heat is lost or gained by a closed system,

So therefore,

heat lost by aluminium = heat gained by water

H = mass * specific heat capacity * temeprature change

So:

m c ( T2- T1) = m c (T2-T1)

50 * 0.88 * ( T2 - 225) = 100 * 4.18 *( T2 - 20)

44 ( T2 - 225 ) = 418 ( T2 - 20)

44 T2 - 9900 = 418 T2 - 8360

-9900 + 8360 = 418 T2 - 44 T2

-1540 = 374 T2

T2 = - 4.117

So therefore the final temperature of water is -4.117 °C

Answer:

Since the relationship between amino acid and codon bases would be the values of 3 nitrogenous bases per 1 amino acid.

knowing this relationship what you would do is simply multiply 146 x 3 to find the number of codon bases which would be C. 438.

A strand of messenger RNA coding the synthesis of a protein with 146 amino acids must have a string of 438 bases along its backbone and the correct option is option C.

mRNA or messenger RNA is a single stranded RNA molecule. It is complementary to the DNA and carries genetic information present in the DNA. It is translated to form proteins. The genetic codes (triplet) present on mRNA get translated to amino acids, giving rise to the functional product of a gene.

So mRNA really is a form of nucleic acid, which helps the human genome which is coded in DNA to be read by the cellular machinery. mRNA is actually the translated form of DNA that the machinery can recognize and use to assemble amino acids into proteins.

Each strand has 3 bases, so 146 × 3 = 438 bases

Therefore, A strand of messenger RNA coding the synthesis of a protein with 146 amino acids must have a string of 438 bases along its backbone and the correct option is option C.

Learn more about messenger RNA, here:

https://brainly.com/question/15837874

#SPJ3

Answer:

- you have to do maths in all 3

- atoms make up everything even parts of a cel and theyre studied in chem and physics

- chemistry is used in biology by finding out what different substances are eg cytoplasm in a cell

Answer:

SCN- is a weak field ligand while CN- is a strong field ligand

Explanation:

The spectrochemical series is an arrangement of ligands according to their magnitude of crystal field splitting. Ligands that cause only a small degree of crystal field splitting are called weak field ligands while ligands that cause large crystal field splitting are called strong field ligands.

Strong field ligands often lead to the formation of low spin complexes with the least number of unpaired electrons while high spin complexes are formed by weak field ligands.

CN- is a strong field ligand as it lies towards the right hand side of the spectrochemical series.

SCN- is a weak field ligand hence it forms a high spin complex having the maximum number of unpaired electrons for Fe^3+, hence the answer.

SCN⁻ lies in the lower (weak field) region of the spectrochemical series while CN⁻ lies in the higher (stronger field) region.

CN⁻ is a strong field ligand with a large splitting constant, and it is high up in the spectrochemical series.

Conversely, SCN⁻ is a weak field ligand with a low splitting constant, and it is lower in the spectrochemical series.

Hence, SCN⁻ lies in the lower (weak field) region of the spectrochemical series while CN⁻ lies in the higher (stronger field) region.

Learn more here: https://brainly.com/question/14658134

Answer:

PLEASE SHOW ME THE ELEMENTS OR I WOULD ENLIST ALL THE ELEMENTS.

Explanation:

Group 6A (or VIA) of the periodic table are the chalcogens: the nonmetals oxygen (O), sulfur (S), and selenium (Se), the metalloid tellurium (Te), and the metal polonium (Po)

delete please .....................................