Answer:
B - 4.5 L.
Explanation:
Took the test.
what relative masses of dimethyl amine and dimethyl ammonium chloride do you need to prepare a buffer solution of ph = 10.54?
To prepare a buffer solution of pH = 10.54, the relative masses of dimethyl amine and dimethyl ammonium chloride needed are 0.079 g and 0.067 g respectively.
A buffer solution is a solution that has the ability to resist changes in pH upon the addition of small amounts of acid or base. A buffer solution contains a weak acid and its conjugate base or a weak base and its conjugate acid. It can be prepared by mixing equal volumes of a weak acid and its conjugate base or a weak base and its conjugate acid.
Dimethyl amine is an organic compound with the formula (CH3)2NH. It is a weak base and can act as a proton acceptor. Dimethyl ammonium chloride is an organic compound with the formula (CH3)2NH2Cl. It is a salt of a weak base and a strong acid and can act as a proton donor.
Calculation of relative masses:
The pKa of dimethyl amine is 10.73.
To prepare a buffer solution of pH = 10.54,
the ratio of [A-]/[HA] should be 1/9.
Using the Henderson-Hasselbalch equation;
pH = pKa + log([A-]/[HA])10.54 = 10.73 + log([A-]/[HA])
log([A-]/[HA]) = -0.19[A-]/[HA] = 0.67/1.00
The sum of the masses of dimethyl amine and dimethyl ammonium chloride is 0.146 g. The ratio of their masses is 0.67:1.00.
So, the relative masses of dimethyl amine and dimethyl ammonium chloride needed are 0.079 g and 0.067 g respectively.
To know more about Buffer solution refer here :
https://brainly.com/question/13076037
#SPJ11
Phosphorus reacts with oxygen to form diphosphorus 4P(s)+5O2(g)⟶2P2O5(s) How many grams of P2O5 are formed when 7.65 g of phosphorus reacts with excess oxygen? Show the unit analysis used for the calculation by placing the correct components into the unit-factor slots.
17.51 g of P2O5 is formed when 7.65 g of phosphorus reacts with excess oxygen. Unit analysis used for the calculation:
What is unit analysis?Unit analysis or dimensional analysis is a mathematical method to convert one unit to another unit. It is based on the idea of multiplying by a conversion factor, which is a fraction in which the same quantity is expressed in two different units.
Balanced equation: 4P(s)+5O2(g)⟶2P2O5(s)
Molar mass of P = 30.97 g/mol
Molar mass of P2O5 = 141.94 g/mol
Number of moles of P = given mass / molar mass
Number of moles of P = 7.65 g / 30.97 g/mol
Number of moles of P = 0.24674 mol
Number of moles of P2O5 = (number of moles of P) / (4 mol of P produces 2 mol of P2O5)
Number of moles of P2O5 = 0.24674 mol / 2Number of moles of P2O5 = 0.12337 mol
Mass of P2O5 = number of moles of P2O5 × molar mass of P2O5
Mass of P2O5 = 0.12337 mol × 141.94 g/mol
Mass of P2O5 = 17.51
Thus, 17.51 g of P2O5 is formed when 7.65 g of phosphorus reacts with excess oxygen.
To know more about unit analysis:
https://brainly.com/question/30637489
#SPJ11
True or False : The manipulated variable is the same thing as the independent variable.
Answer:
True.
The manipulated variable and the independent variable refer to the same thing in an experiment. It is the variable that is intentionally changed or manipulated by the experimenter to observe its effect on the dependent variable.
which scientist conducted the gold foil experiment and discovered that the atom has a positively charged nucleus?
Ernest Rutherford, a New Zealand physicist, conducted the gold foil experiment and discovered that the atom has a positively charged nucleus.
In 1911, he conducted an experiment in which he fired alpha particles at a thin sheet of gold foil. The majority of the particles went straight through the gold foil, but a small percentage of the particles bounced back. He discovered that the bouncing back was caused by a small, positively charged nucleus at the center of the atom. Rutherford's experiment was crucial to our understanding of the structure of the atom. Prior to his experiment, the prevailing model of the atom was that it was a solid, indivisible sphere.
However, Rutherford's experiment showed that the atom was mostly empty space, with a positively charged nucleus at its center. This discovery paved the way for future research into atomic structure and helped to lay the foundation for the development of nuclear physics.
For more questions on Ernest Rutherford
https://brainly.com/question/28809146
#SPJ11
TRUE OR FALSE: THE LIMITING REAGENT CONTROLS A REACTION’S THEORETICAL YIELD, BUT A NUMBER OF SIDE REACTIONS MAY ALSO OCCUR, CAUSING THE ACTUAL YIELD TO VARY.
Answer:
True. The limiting reagent is the reactant that is completely consumed in a chemical reaction and limits the amount of product that can be formed. The theoretical yield is the maximum amount of product that can be obtained from the limiting reagent, assuming that the reaction goes to completion and no side reactions occur. However, in practice, it is common for side reactions to occur, which can reduce the actual yield of the product. Therefore, while the limiting reagent does control the theoretical yield of a reaction, the actual yield may vary due to the presence of side reactions or other factors that can affect the efficiency of the reaction.
Explanation:
a 3-year-old child is drawing with a pen and calls it a pencil. when she tries to erase her drawing, she becomes confused about why it is not erasing. this new piece of information does not fit with her current understanding about what a pencil is and leads to . select one: a. equilibrium b. disequilibrium
A) Equilibrium
The 3-year-old child is experiencing disequilibrium when she tries to erase her drawing with a pen and it does not erase. This is because her current understanding of a pencil does not fit with the new piece of information that it does not erase. Equilibrium occurs when a person is able to process new information and integrate it into their current understanding.
According to Piaget's cognitive development theory, the process by which a child's existing ideas are disrupted is called disequilibrium, which is option B.
What is cognitive development theory?
Cognitive development theory is a comprehensive theory that explains how children learn and acquire knowledge. This theory was created by psychologist Jean Piaget, who believed that cognitive growth is a gradual and ongoing process. According to Piaget, cognitive development refers to the gradual progression of thought processes, including problem-solving, attention, perception, and memory, that arise from biological development and environmental interaction. The process by which a child's existing ideas are disrupted is called disequilibrium. According to Piaget, when new information is discovered that does not fit into a person's existing schema, he or she may become disoriented or confused. This is referred to as disequilibrium. As a result, the person is compelled to adjust or adapt their schema to accommodate the new information. When this is accomplished, the person returns to a state of equilibrium. In the situation mentioned above, the child has a mental picture of what a pencil is in her head, but the pen does not meet her expectations. The child is thrown into a state of disequilibrium as a result of this confusion. The child may need to revise her schema in order to include pens. She will then restore her equilibrium once she has completed the revision process.
For more information follow the link: https://brainly.com/question/30638795
#SPJ11
PLEASE HELP ASAP!!!!!
The option that has the correct electron configuration for vanadium is:
A. 1[tex]s^{2}[/tex] 2[tex]s^{2}[/tex] 2[tex]p^{4}[/tex] 3[tex]s^{2}[/tex] 3[tex]p^{6}[/tex] 4[tex]s^{2}[/tex] 3[tex]d^{5}[/tex]
The electron configuration for vanadium (V) is:
1[tex]s^{2}[/tex] 2[tex]s^{2}[/tex] 2[tex]p^{6}[/tex] 3[tex]s^{2}[/tex] 3[tex]p^{6}[/tex] 4[tex]s^{2}[/tex] 3[tex]d^{3}[/tex]
For only the 3d sublevel, the configuration would be 3d3.
So, the option that has the correct electron configuration for vanadium is:
A. 1[tex]s^{2}[/tex] 2[tex]s^{2}[/tex] 2[tex]p^{4}[/tex] 3[tex]s^{2}[/tex] 3[tex]p^{6}[/tex] 4[tex]s^{2}[/tex] 3[tex]d^{5}[/tex]
What is an electron?
An electron is a subatomic particle that carries a negative electric charge. It is one of the fundamental particles that make up atoms, along with protons and neutrons. Electrons are found outside the nucleus of an atom in regions called shells or energy levels, and they are responsible for chemical bonding and the conduction of electricity.
What is vanadium?
Vanadium is a chemical element with the symbol V and atomic number 23. It is a hard, silvery-grey, ductile, and malleable transition metal that is found in various minerals and mineral ores. Vanadium has several important industrial uses, including as an alloying agent in steel and as a catalyst in the production of sulfuric acid. It is also used in the production of titanium alloys for aerospace and other high-performance applications, as well as in the manufacture of rechargeable batteries. Vanadium has biological functions in some organisms and is considered an essential trace element in the human diet.
To know more about vanadium, visit:
https://brainly.com/question/14247240
#SPJ1
combining 50 ml of vinegar with 500 ml of milk causes the vinegar, which is an acid, to react with the milk. the milk sours and thickens, creating cottage cheese. what kind of change is this?
answer choices
chemical
mechanical
physical
potential
A chemical alteration has occurred. A new material, cottage cheese, with distinct qualities from the original milk and vinegar is produced when the acid in the vinegar and the proteins in the milk react.
The change described is a chemical change. When vinegar, which is an acid, is combined with milk, a reaction occurs between the acid and the proteins in the milk. This reaction causes the milk to sour and thickens, resulting in the formation of cottage cheese. This change cannot be easily reversed, and the resulting cottage cheese is a new substance with different properties than the original milk and vinegar. This is a chemical change because the molecules in the milk and vinegar are rearranged to form a new substance, which has different chemical and physical properties than the original substances. This process is different from a physical change, such as melting ice, which does not result in the formation of a new substance.
learn more about chemical alteration here:
https://brainly.com/question/29037431
#SPJ4
during the synthesis of salicylic acid, methanol and sodium sulfate are given off as byproducts of the reactions. during which steps of the synthesis are these compounds separated from the final product? explain.
During the synthesis of salicylic acid, methanol and sodium sulfate are given off as byproducts of the reactions. To separate these compounds from the final product, distillation is typically used.
During the distillation process, the boiling point of the desired product (salicylic acid) is different from the boiling points of the unwanted compounds (methanol and sodium sulfate). The distillation process vaporizes and separates the components, allowing the desired compound (salicylic acid) to be collected. Methanol and sodium sulfate are two byproducts of salicylic acid synthesis. Methanol is used as a solvent for salicylic acid, and sodium sulfate is used as a drying agent to extract the water from the product after the acid has been synthesized.
Salicylic acid is less soluble in methanol than in water, so it can be separated from the solution by filtration. The solution is then washed with water to remove any remaining traces of methanol. The filtrate containing the methanol and sodium sulfate is collected in a separate container.
Therefore , Methanol can be recovered by distillation .Hence these compounds separate from the final product by distillation .
To know more about Distillation refer here:
https://brainly.com/question/29416097
#SPJ11
students conducting research observe the rate of an enzyme-catalyzed reaction under various conditions with a fixed amount of enzyme in each sample. when will increasing the substrate concentration likely result in the greatest increase in the reaction rate?
Increasing the substrate concentration will likely result in the greatest increase in the reaction rate when the substrate concentration is lower than the concentration of the enzyme.
The concentration of the substrate affects the rate of reaction since there is a direct correlation between the number of enzyme-substrate complexes that are formed and the rate of reaction.
When there is more substrate, more enzyme-substrate complexes can form, resulting in an increase in the rate of reaction.
So, it is highly likely that when the substrate concentration is low, increasing the substrate concentration will result in the greatest increase in the reaction rate.
However, when the substrate concentration is already high, the reaction rate may not continue to increase as a result of increasing the substrate concentration.
Learn more about substrate concentration here:
https://brainly.com/question/22428921
#SPJ11
oxalic acid, which is present in rhubarb, was found to consist of 26.68% c, 2.24% h, and 71.08% o by mass. find the empirical formula for oxalic acid.
The empirical formula for oxalic acid is C2H2O2.
Oxalic acid, which is present in rhubarb, was found to consist of 26.68% C, 2.24% H, and 71.08% O by mass.
What is the empirical formula for oxalic acid?Empirical formula is the simplest formula that represents the composition of a compound in terms of atoms, and it can be obtained by calculating the ratio of atoms of each element in the compound.
The empirical formula of oxalic acid can be found by assuming 100 g of the compound so that the mass percent can be expressed as grams of each element. In the next step, these grams will be converted into moles for each element using their molar mass. The empirical formula will then be the ratio of atoms for each element in the compound.
Let's find out the number of moles of each element in oxalic acid.
C = 26.68 g = 26.68 / 12.01 = 2.22 molH = 2.24 g = 2.24 / 1.01 = 2.22 molO = 71.08 g = 71.08 / 16.00 = 4.44 mol
As the atomic ratios are the same for all three elements, the empirical formula is C2H2O2, and this formula is also called the simplest formula for oxalic acid. The empirical formula for oxalic acid is C2H2O2.
Learn more about acids: https://brainly.com/question/25148363
#SPJ11
For these ions, write the correct symbol and charge
1.) rhenium (IV) ion
2.). iridium (IX) ion
3.)platinum (II) ion
4.)technetium (VII) ion
Rhenium (IV) ion is represented as Re4+.Iridium (IX) ion is not possible as the maximum possible element state for iridium is +VIII.Platinum (II) ion is represented as Pt2+. Technetium (VII) ion is represented as Tc7+.
Where is an ion's charge located?The net charge is expressed in superscript directly just after chemical structure of the molecule/atom in the chemical equation for just an ion. The doubly charge cation is denoted as 2+ rather than +2 because the size of the net charge was written before the sign.
How is a +2 ion created?A metal ion occurs whenever a metal gives up the outermost electrons to obtain a full octet. Calcium (Ca) will become a cation when it loses two electrons from of the outermost energy shell. There will be a +2 charge on it because it lost 2 electrons. With more protons than electrons, it has a positive charge (+2).
To know more about element visit:
https://brainly.com/question/14347616
#SPJ1
Emma prepared two glasses of water at two different temperatures. She added a spoonful of table salt to the cold water in glass #1 and spoonful of rock salt to the hot water in glass #2. She observed that the spoonful of table salt in glass #1 dissolved faster than the spoonful of rock salt in glass #2. Based on this observation, Emma concluded that salt dissolves faster in cold water than in hot water.
What question was Emma trying to investigate in her experiment?
Are table salt and rock salt soluble or insoluble in cold and hot water without stirring?
Does surface area affect the rate of dissolving of a substance in water?
Does temperature affect the rate of dissolving of a substance in water?
What type of salt dissolves faster in water when stirred at different temperatures?
Answer: Does temperature affect the rate of dissolving a substance in water?
According to the following reaction, how many moles of hydrogen iodide will be formed upon the complete reaction of 0.283 moles of hydrogen gas with excess iodine?hydrogen (g) + iodine (s) → hydrogen iodide (g)
0.566 moles of hydrogen iodide will be formed upon the complete reaction of 0.283 moles of hydrogen gas with excess iodine.
To determine how many moles of hydrogen iodide will be formed, we need to use stoichiometry.
The balanced chemical equation for the given reaction is:-
H₂ (g) + I₂ (s) → 2HI (g)
From the balanced chemical equation, we know that 1 mole of hydrogen reacts with 1 mole of iodine to produce 2 moles of hydrogen iodide.
Since the number of moles of hydrogen is given as 0.283 moles, therefore, the number of moles of iodine required is also 0.283 moles.
Therefore, the number of moles of hydrogen iodide formed = 2 x 0.283 mol= 0.566 mol.
Learn more about moles:
https://brainly.com/question/15356425
#SPJ11
which of these interactions might form between two polar molecules? [select all that apply.] group of answer choices hydrogen bonding dispersion forces dipole-dipole interactions
The following interactions might form between two polar molecules Hydrogen bonding Dipole-dipole interactions.
Hydrogen bonding is a type of attractive interaction that forms between a hydrogen atom and a highly electronegative atom (such as nitrogen, oxygen, or fluorine) on another molecule. As a result, two polar molecules can form hydrogen bonds. Dipole-dipole interactions occur between polar molecules when the positive end of one molecule is attracted to the negative end of another molecule. Hence, dipole-dipole interactions can also form between two polar molecules. Dispersion forces occur in all types of molecules, but they are not unique to polar molecules. Therefore, dispersion forces cannot form between two polar molecules. Conclusively, hydrogen bonding and dipole-dipole interactions are the interactions that might form between two polar molecules.
Know more about polar molecules
https://brainly.com/question/1433127
#SPJ11
which scientist conducted the gold foil experiment and discovered that the atom has a positively charged nucleus in the center, and that most of that atom is empty space?rutherfordgoldsteinalessandro volta
Ernest Rutherford is the physicist who carried out the gold foil experiment and found that the atom has a positively charged nucleus in the centre and that the majority of that atom is empty space.
The gold foil experiment was carried out in 1911 by Ernest Rutherford, who attacked a thin sheet of gold foil with alpha particles and tracked their scattering patterns.
Based on his discoveries, he put forth the nuclear model of the atom, which argues that the majority of the atom is made up of empty space and contains a positively charged nucleus at its core. The advancement of the contemporary atomic theory was greatly aided by this experiment.
learn more about positively charged nucleus here:
https://brainly.com/question/1549147
#SPJ4
Classify each titration curve as representing a strong acid titrated with a strong base, a strong base titrated with a strong acid, a weak acid titrated with a strong base, a weak basetaed with a strong acid, or a polyprotic acid titrated with a strong base. Strong acid/Strong base/ strong base Weak acid strong base Weak base Polyprotic acid strong acid strong acid strong base mL of titrant mL of titrant mL of titrant mL of titrant mL of titrant
When it comes to titration, a titration curve is the representation of the change in pH with regards to the volume of titrant added.
The point of equivalence is where the stoichiometric amount of titrant reacts completely with the analyte being titrated.
There are several types of titration curves. Below are the classifications of each titration curve:
Strong acid titrated with a strong base. The titration curve for this scenario starts out with a pH of around 3.0, which is the pH of a strong acid. The pH rises until the equivalence point is reached. The pH then drops steeply after the equivalence point.
Strong base titrated with a strong acid. In this titration curve, the pH starts off around .11, which is the pH of a strong base. The pH drops rapidly until the equivalence point is reached. The pH then rises steeply after the equivalence point.
Weak acid titrated with a strong base. In this titration curve, the pH starts off slightly acidic due to the presence of the weak acid. The pH rises gradually until the equivalence point is reached. The pH then increases steeply after the equivalence point.
Weak base titrated with a strong acid. The pH starts off slightly basic in this titration curve due to the weak base. The pH decreases gradually until the equivalence point is reached. The pH then drops steeply after the equivalence point.
Polyprotic acid titrated with a strong base. In this titration curve, there are more than one equivalence point because the acid is capable of releasing more than one hydrogen ion.
Each equivalence point represents the point at which one mole of H+ is neutralized.
For more information about titration curve refer here
https://brainly.com/question/29590776?
#SPJ11
which of the double bonds in zingiberene, the compound responsible for the aroma of ginger, is the most reactive in an electrophilic addition reaction with hbr ? zingiberene has the following line-angle formula: a ring with six vertices, with a double bond between the first and the second (clockwise) and between the third and the fourth vertices, a ch3 group attached to the second vertex, and a substituent attached to the fifth carbon by its first (from left to right) vertex. the substituent is a seven-membered chain consisting of a line terminus, a segment of five vertices, and a line terminus. there is another line segment with a single terminus (no vertices) coming from the fifth chain vertex. there is also a double bond between the fourth and the fifth chain vertices. identify the appropriate bond(s) by selecting each atom individually on the canvas and assigning them a map number of 1 until all atoms of the bond are mapped. to do this, right-click on an atom and choose atom properties. (mac users: use an equivalent for right-clicking.) then, clear the check mark to enable the map field before entering a value.
The double bond between the fourth and fifth chain vertices in the zingiberene compound is the most reactive in an electrophilic addition reaction with HBr.
This double bond can be identified by selecting each atom individually on the canvas and assigning them a map number of 1 until all atoms of the bond are mapped. To do this, right-click on an atom and choose atom properties (Mac users: use an equivalent for right-clicking). Then, clear the check mark to enable the map field before entering a value.
To learn more about "double bonds", visit: https://brainly.com/question/1004467
#SPJ11
The density of a gas is the mass per unit volume of the gas in the units of, for example, grams per litre. By finding the mass of one litre (assume 1.00L) of gas you can calculate the density of the gas. knowledge of the densities of the gas compared to the density of air (1.2 g/l), can save your life.
A) what is the density of carbon monoxide gas at 20C and 98 kPa in your home.
The density of carbon monoxide gas at 20°C and 98 kPa is 1.145 g/L.
The ideal gas law is PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in kelvin.
To find the density of carbon monoxide gas at 20°C and 98 kPa, we can use the ideal gas law to find the number of moles of gas in 1 L of gas at these conditions and then divide the mass of 1 mole of gas by the number of moles to get the density.
First, we need to convert the temperature to kelvin:
20°C + 273.15 = 293.15 K
Rearranging the ideal gas law, we get:
n = PV/RT
We can assume that the volume is 1 L, so:
n = (98 kPa)(1 L) / [(0.0821 L·atm/mol·K)(293.15 K)] = 0.0413 mol
The molar mass of carbon monoxide is 28.01 g/mol, so the mass of 0.0413 mol is:
0.0413 mol x 28.01 g/mol = 1.152 g
Therefore, the density of carbon monoxide gas at 20°C and 98 kPa is:
1.152 g / 1 L = 1.145 g/L
What is density?
Density is a physical property of matter that relates to the amount of mass per unit of volume of a substance. It is typically expressed in units such as grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³).
To know more about density, visit:
https://brainly.com/question/29775886
#SPJ1
a regular tetrahedron is a pyramid with four faces, each of which is an equilateral triangle. let $v$ be the volume of a regular tetrahedron whose sides each have length $1$. what is the exact value of $v^2$ ?
For the regular tetrahedron, the exact value of $v^2$ is $\frac{1}{144}$.
The regular tetrahedron is a pyramid with four faces, each of which is an equilateral triangle. Let $v$ be the volume of a regular tetrahedron whose sides each have length 1. A regular tetrahedron is a three-dimensional object with four triangular faces that are congruent. It has four vertices, six edges, and four faces that are equilateral triangles. Let us find the length of height of the tetrahedron using Pythagoras theorem.
$$Height^2=1^2-\left(\frac{1}{2}\right)^2$$
$$\Rightarrow Height^2=1-\frac{1}{4}$$
$$\Rightarrow Height=\frac{\sqrt3}{2}$$
Now, the volume of a tetrahedron is given as,
$$v=\frac{1}{3} \times Area_{base} \times Height$$T
he base of the tetrahedron is an equilateral triangle. We know that the area of an equilateral triangle with side $a$ is,
$$Area=\frac{\sqrt3}{4}a^2$$
For the given tetrahedron, the area of the base is,
$$Area_{base}=\frac{\sqrt3}{4} \times 1^2$$
$$\Rightarrow Area_{base}=\frac{\sqrt3}{4}$$
Now, the volume of the given tetrahedron is,
$$v=\frac{1}{3} \times \frac{\sqrt3}{4} \times \frac{\sqrt3}{2}$$
$$\Rightarrow v=\frac{\sqrt3}{12}$$
Thus, the square of the volume of the given tetrahedron is,
$$v^2=\left(\frac{\sqrt3}{12}\right)^2$$
$$\Rightarrow v^2=\frac{1}{144}$$
Therefore, the exact value of $v^2$ is $\frac{1}{144}$.
Learn more about Tetrahedron:
https://brainly.com/question/14493233
#SPJ11
How would the Rf of eugenol increase or decrease if you ran your TLC plate in 40% ethyl acetate in hexanes? a.The Rf value would increase. b. The Rf value would decrease.c. The Rf would remain the same.
Answer: B (The Rf value would decrease)
Explanation:
The Rf (retention factor) value is a ratio of the distance traveled by the compound to the distance traveled by the solvent front in thin-layer chromatography (TLC). The polarity of the solvent affects the Rf value of a compound.
In general, if a more polar solvent is used in TLC, the Rf value of a compound will decrease, and if a less polar solvent is used, the Rf value will increase.
In this case, using 40% ethyl acetate in hexanes means using a more polar solvent compared to a pure hexanes solvent. As eugenol is a moderately polar compound, the increased polarity of the solvent will likely result in a decrease in the Rf value.
Therefore, the correct answer is b. The Rf value would decrease.
11. C2 JUN 06 Q3
Classify the type of reaction occurring below.
CH₂CH₂CHCH₂OH
CH,
→CH₂CH₂C=CH₂ + H₂O
CH,
12.a) Draw the displayed formula, and name the ester formed when ethanoic acid reacts with propan-1-ol
in the presence of a suitable catalyst.
Name:
b) State the name of a suitable catalyst for this reaction.
[1]
24
...[2]
..[1]
Answer:
11.The type of reaction occurring is an elimination reaction.
12. a) The displayed formula and name of the ester formed when ethanoic acid reacts with propan-1-ol in the presence of a suitable catalyst are:
Displayed formula:
H H
│ │
H-C-C-OH + H-C-C-H → H-C-C-OC-C-H + H₂O
│ │
H CH₃
Name: Propan-1-yl ethanoate or propyl acetate
b) A suitable catalyst for this reaction is concentrated sulfuric acid (H₂SO₄).
. describe how to prepare 15 ml of a 0.25 m cacl2 solution using deionized water and cacl2 salt. the molecular weight of cacl2 is 110.98 g/mol. show your work. (recall: m
To prepare 15 ml of a 0.25 M CaCl₂ solution using deionized water and CaCl₂ salt, the following steps must be followed.
1. Calculate the amount of CaCl₂ salt needed:
Moles = Molarity * Volume (L)
Moles = 0.25M x 0.015L = 0.003750 moles
Mass of CaCl₂ salt = 0.003750 x 110.98 g/mol = 0.41637 g
2. Measure out 0.41637 g of CaCl₂ salt and add it to a clean beaker.
3. Measure out 15 ml of deionized water and add it to the beaker with the CaCl₂ salt.
4. Stir the mixture until the CaCl₂ salt has fully dissolved.
5. The solution is now ready to use.
It is important to remember to use caution when handling and measuring the chemicals and to always wear safety goggles and gloves when working with chemicals.
To know more about CaCl₂ solution, refer here:
https://brainly.com/question/28950352#
#SPJ11
The Chernobyl nuclear disaster led to the release of massive radiation, specifically iodine-131 and cesium-137, which has been connected to a variety of environmental problems in the 30 years following the disaster. A meltdown in which of the following structures at a nuclear power plant, such as Chernobyl, would most likely lead to the accidental release of radiation?
Cooling tower
Turbine
Generator
Reactor core
Reactor core
Answer:
The meltdown in which of the following structures at a nuclear power plant, such as Chernobyl, would most likely lead to the accidental release of radiation is reactor core. Answer:e
Explanation:
What is the Chernobyl nuclear disaster?
The Chernobyl nuclear disaster was a catastrophic nuclear accident that occurred on April 26, 1986, at the No. 4 reactor in the Chernobyl Nuclear Power Plant, located in the northern Ukrainian Soviet Socialist Republic.
The explosion and subsequent fires resulted in the release of significant amounts of radioactive material into the atmosphere, as well as widespread contamination of the environment.
What was the cause of the Chernobyl nuclear disaster?
During a reactor systems test, an unforeseen combination of factors caused the core of one of Chernobyl's reactors to overheat and explode, releasing radioactive material into the surrounding area. The resulting steam explosion and fires killed two plant workers at the time of the accident and injured hundreds of others.
The explosion also resulted in the deaths of dozens of firefighters and other emergency workers in the aftermath of the disaster.
What was the impact of the Chernobyl nuclear disaster on the environment?
The Chernobyl nuclear disaster resulted in the release of significant quantities of radioactive material, including iodine-131 and cesium-137, which have been linked to a variety of environmental issues. These substances are still present in the environment, and their long-term effects on humans and wildlife are still being investigated.
However, the disaster has had a significant impact on the environment in the years following the accident, including the contamination of water and soil, the displacement of wildlife, and the potential long-term health effects on local populations.
To know more about Chernobyl nuclear disaster refer here:https://brainly.com/question/10116000#
#SPJ11
If 110 grams of potassium chloride are mixed with 100 grams of water at 20°C, how much will not dissolve?
76 grams of potassium chloride will not dissolve in 100 grams of water at 20°C.
What is the solubility of the potassium chloride?
The solubility of potassium chloride in water at 20°C is approximately 34 grams per 100 grams of water.
So, if 100 grams of water can dissolve 34 grams of potassium chloride, then the maximum amount of potassium chloride that can be dissolved in 100 grams of water at 20°C is 34 grams.
Therefore, the amount of potassium chloride that will not dissolve in 100 grams of water at 20°C is:
110 grams - 34 grams = 76 grams
Learn more about solubility here: https://brainly.com/question/23946616
#SPJ1
Predict the molecular shape for each of these compounds. Remember to consider all of the outer electrons before you make your choice.A. Tetrahedral- MethaneB. Trigonal Pyramidal- AmmoniaC. Trigonal Planar- Sulfur TrioxideD. Bent- Water, OzoneE. Linear- Carbon Dioxide
(a) Methane -the molecular shape is tetrahedral shape.
(b) Ammonia - the molecular shape is trigonal pyramidal.
(c) Sulfur trioxide - the molecular shape is trigonal planar shape.
(d) Water - the molecular shape is bent shape.
(e) Carbon dioxide - the molecular shape is a linear shape.
What is a molecular shape?Molecular shape refers to the three-dimensional arrangement of atoms in a molecule. It describes the relative positions of the atoms and the angles between the chemical bonds that connect them.
The shape of a molecule is determined by the arrangement of its electrons and the way in which the atoms share these electrons to form chemical bonds. The shape of a molecule can have a significant impact on its physical and chemical properties, such as its polarity, reactivity, and solubility.
Learn more about molecular shapes here: https://brainly.com/question/11985101
#SPJ1
if you used 5 g of salicylic acid and excess acetic anhydride in the preceding synthesis of aspirin, what would be the theoretical yield of acetylsalicylic acid in moles?
Acetylsalicylic acid's theoretical yield in moles is also 0.0362 mol.
What happens when you combine salicylic acid with acetic anhydride?Acetic anhydride is used to treat salicylic acid to create acetylsalicylic acid, also known as aspirin. To speed up crystallization and maximize the amount of product produced, place the flask in an ice bath. Scratching the inside of the flask with a glass rod could be beneficial if crystals are taking a while to form.
We must first balance the chemical equation for the process in order to determine the theoretical yield of acetylsalicylic acid:
salicylic acid + acetic anhydride → acetylsalicylic acid + acetic acid
C7H6O3 + (C2H3O)2O → C9H8O4 + C2H4O2
Salicylic acid has a molar mass of 138.12 g/mol, making 5 g of it equal to:
5 g / 138.12 g/mol
= 0.0362 mol.
To know more about Acetylsalicylic acid's visit:-
https://brainly.com/question/13188890
#SPJ1
How many moles of fe3o4 can be produced when 12. 00 mol fe react with 6. 00 mol o2?
When the 12. 00 mol Iron react with 6.00 mol O2 then 4.00 mol of Fe3O4 can be produced.
In order to know how many moles of Fe3O4 can be produced from the reaction of 12.00 mol Fe with 6.00 mol O2, we first need to get balance the chemical equation for the reaction:
4 Fe + 3 O2 -----> 2 Fe3O4
From the balanced equation, we can see that for every 4 moles of Fe that react, we need 3 moles of O2. Therefore, the limiting reactant in this case is O2, since we only have 6.00 mol available, while we need 8.00 mol to react with all 12.00 mol of Fe. This means that Fe will be in excess and we can calculate the amount of Fe3O4 produced based on the amount of O2 that reacts.
To do this, we can use the mole ratio from the balanced equation:
3 mol O2 --------> 2 mol Fe3O4
So, for every 3 moles of oxygen that react, we can produce 2 moles of Fe3O4. Since we have 6.00 mol of O2, we can obtain the moles of Fe3O4 produced as follows:
6.00 mol O2 x (2 mol Fe3O4 / 3 mol O2) = 4.00 mol Fe3O4
Therefore, it can be concluded that 4.00 mol of Fe3O4 can be produced when 12.00 mol Iron reacts with 6.00 mol O2.
Learn more Molarity :
https://brainly.com/question/15948514
#SPJ4
a solution of was heated at for several hours. after some time the concentration of was determined. answer the following questions: a) what is the maximum amount of work ( ) from/for this reaction when ?
The maximum amount of work from/for this reaction a solution of was heated at for several hours is -8.69 KJ.
What is solution ?A solution is a type of homogeneous mixture composed of two or more substances in chemistry. A solute in such a mixture is a substance that has been dissolved in another substance known as a solvent. If the attractive forces between the solvent and solute particles are stronger than the attractive forces holding the solute particles together, the solvent particles separate and surround the solute particles. These encircled solute particles then move away from the solid solute and into solution. The mixing of a solution occurs at a scale where the effects of chemical polarity are involved, resulting in solvation-specific interactions. When the solvent is the greater fraction of the solution, the solution usually has the state of the solvent.
using the formula
ΔG = ΔG° + RT ln(Q)
Work done = -8.69 KJ
To know more about solutions, visit;
brainly.com/question/30665317
#SPJ1
an exothermic chemical reaction between a solid and a liquid results in gaseous products. spontaneous?
An exothermic chemical reaction between a solid and a liquid results in gaseous products. It is a spontaneous reaction.
What is an exothermic reaction?When a chemical reaction takes place with the release of heat, it is known as an exothermic chemical reaction. An exothermic chemical reaction is a chemical reaction that releases energy in the form of heat, light, or sound during the process. The burning of paper is an example of an exothermic chemical reaction. When paper burns, heat and light are produced, which we can feel or observe.
The reaction is spontaneous if the Gibbs free energy, delta G is negative. A reaction will be spontaneous if its delta G is negative. The reaction will proceed from left to right if delta G is negative, and it will proceed from right to left if delta G is positive. A reaction will be at equilibrium if delta G is zero.The reaction mentioned in the question is an exothermic chemical reaction because it results in the release of heat. As a result, the reaction is spontaneous. The production of gaseous products indicates that a gas is formed during the reaction. Therefore, this reaction is spontaneous.
Learn more about Exothermic reaction here:
https://brainly.com/question/10373907
#SPJ11
