Answer:
c
Explanation:
the oxygen in the air and water from the rain caused oxidation causing the copper wire to become tarnished.
The statement that describes a change resulting from the chemical properties of the wire is it becomes tarnished. The correct option is C.
What are chemical properties?Chemical properties are those properties that are not always shown physically, but they came out of a chemical reaction. Chemical properties are pH, solubility, toxicity, the heat of combustion, flammability, reactivity, etc.
The copper wire, when left out in the environment, becomes tarnished, due to the air and moisture present in the environment. The meaning of tarnished means it loses its luster or its quality.
Copper is a shiny, soft, and brown-colored metal. It is usually used in making wire used for electricity.
Thus, the correct option is C. It becomes tarnished.
Learn more about chemical properties, here:
https://brainly.com/question/4308603
#SPJ5
How many mL of 0.125 M Ba(OH)2 would be required to completely neutralize 75.0 mL of 0.845 M HCl? What is the pH of the solution at the equivalence point?
Answer:
253.5mL of Ba(OH)₂ are required to neutralize the HCl solution
The pH at equivalence point is = 7
Explanation:
The reaction of Ba(OH)₂ with HCl is:
Ba(OH)₂ + 2HCl → BaCl₂ + 2H₂O
First, we need to find moles of HCl. With these moles and the chemical equation we can find the moles of Ba(OH)₂ and the volume required:
Moles HCl:
75.0mL = 0.075L * (0.845mol / 1L) = 0.063375moles HCl
Moles Ba(OH)₂:
0.06338moles HCl * (1mol Ba(OH)₂ / 2mol HCl) = 0.03169 moles Ba(OH)₂
Volume of the 0.125M Ba(OH)₂:
0.03169 moles Ba(OH)₂ * (1L / 0.125mol) = 0.2535L are required =
253.5mL of Ba(OH)₂ are required to neutralize the HCl solution
As the titration was of a strong acid, HCl, with a strong base, Ba(OH)₂, the pH at equivalence point is = 7
The Earth and the spaceship both have mass. The astronaut is attracted to Earth by gravity, but he is not attracted to the spaceship. Explain.
How does mass affect a star's life cycle?
O A.
The greater a star's mass, the more likely it is to burn forever.
O B.
The greater a star's mass, the more likely it is to form planets.
O c.
The greater a star's mass, the more likely it is to fuse hydrogen.
D.
The greater a star's mass, the more likely it is to become a black hole.
Answer:
A star's life cycle is determined by its mass. The larger its mass, the shorter its life cycle. A star's mass is determined by the amount of matter that is available in its nebula, the giant cloud of gas and dust from which it was born. ... As the gas spins faster, it heats up and becomes as a protostar.Explanation:
Read this and then choose your options ✍️✍️A 12.0% sucrose solution by mass has a density of 1.05 gem, what mass of sucrose is present in a 32.0-mL sample of this solution?
A) 0.126g
B) 3.66g
C) 4.03g
D) 3.84g
E) 280 g
Answer:
Option C. 4.03 g
Explanation:
Firstly we analyse data.
12 % by mass, is a sort of concentration. It indicates that in 100 g of SOLUTION, we have 12 g of SOLUTE.
Density is the data that indicates grams of solution in volume of solution.
We need to determine, the volume of solution for the concentration
Density = mass / volume
1.05 g/mL = 100 g / volume
Volume = 100 g / 1.05 g/mL → 95.24 mL
Therefore our 12 g of solute are contained in 95.24 mL
Let's finish this by a rule of three.
95.24 mL contain 12 g of sucrose
Our sample of 32 mL may contain ( 32 . 12) / 95.24 = 4.03 g
1 carbon atom mixed with 1 oxygen atom what is the formula
Answer:
carbon mono oxide CO
Explanation:
as both are in 1:1 ratio so CO is formed
what is made from a chemical reaction?
Answer:
the Product
Explanation:
What is the total charge of an iron nucleus
An element has three isotopes. The masses and % abundances for the isotopes are: Isotope #1 mass 38.96 amu, % abundance=93.26%, Isotope #2 mass
39.96 amu, % abundance 0.012 %, and Isotope #3 mass= 40.96 amu, % abundance=6.73 %. The average atomic mass for this element has to be
Answer:
39.095
Explanation:
this is because all this isotopes belong to a single element thus
(38.96×93.26)+(39.96×0.012)+(40.96×6.73)
answer of that divided by 100%
What happens after condensation to cause precipitation?
A
The sun heats water on the Earth's surface.
B
Water is absorbed into the ground.
C
Clouds fill with moisture and get too heavy.
D
Excess water runs downhill.
Answer:
The answer is c, Clouds fill with moisture and get too hravy
what is the molarity of a solution made by adding 0.720 mole of NaOH to 2.40 liters of water
Answer:
Molarity = 0.3 M
Explanation:
Given data:
Moles of NaOH = 0.720 mol
Volume of water = 2.40 L
Molarity = ?
Solution:
Molarity is used to describe the concentration of solution. It tells how many moles are dissolve in per litter of solution.
Formula:
Molarity = number of moles of solute / L of solution
Molarity = 0.720 mol / 2.40 L
Molarity = 0.3 mol/L
Molarity = 0.3 M
Pro
∆G0=-RT in k Known as
Answer:
Gibbs free energy equation
Explanation:
Humans have 50 pairs of chromosomes true or false
Answer:
False
Explanation:
humans have 23 pairs
Predict the molecular structure (including bond angles) for each of the following.
a. PCl3
b. SCl2
c. SiF4
Answer:
PCl3 - trigonal pyramidal <109 degrees
SCl2 - bent<109 degrees
SiF4 - tetrahedral 109 degrees
Explanation:
The shape of all three molecules derive from a tetrahedral arrangement of electron pairs.
However, in PCl3 there is a lone pair of electrons on P and three bond pairs. This leads to the observance of a trigonal pyramidal geometry with bond angle <109 degrees.
In SCl2, there are four regions of electron density around S, two lone pairs and two bond pairs leading to a bent molecular geometry with bond angle <109 degrees.
In SiF4, there are four bond pairs and no lone pair. The molecular geometry is tetrahedral with a bond angle of 109 degrees.
Middle school science help please. ill give brainliest
Answer:
It converts The liquid into a gas at the same temperature.
Explanation:
Answer:
it converts the liquid into gas at the same temperature
Explanation:
when heat is added to a liquid at boiling temperature it converts the liquid into gas at that same boiling temperature
please give brainliest
What do you have to do to break a molecule?
Answer:
Heat the molecule
Explanation:
Since most bonds require energy to form, they also give off energy when they are broken. But before most bonds break, the molecule has to be heated. Then the atoms start to move, and when they move too much, the bond breaks. Molecules that require less energy to break than they give off when broken are called fuels.
Protons and neutrons are similar because they both:
cause objects to become charged
are attracted to electrons
are found in the nucleus of an atom
have positive charges
Answer:
C. are found in the nucleus of an atom
Explanation:
Protons and Neutrons are always located at the center of the atom also called as the nuclei of the atom and constitute nearly all the mass of the atom, while the electrons revolve around them in orbits called shells. Only protons have a positive charge and electrons have negative charges, due to which only protons and electrons attract each other, while neutrons lack charges or have 'Neutral Charges'.
30 Points!
Which of the following tasks falls under the responsibility of a forensic scientist?
Cleaning the crime scene after evidence has been collected
Making the final determination as to if a suspect is, in fact, guilty of the crime
Signing search warrants
Training officers in how to collect evidence
The volume of a sample of gas measured at 35 C and 1.00 atm pressure is 2.00 L. What must the final temperature be in order for the gas to have a final volume of 3.00 L at 1.00 atm pressure?
Answer:
the final temperature is 465.2k
9. If purple flowers are dominant to white flowers and
two white flowered plants are crossed, what
percentage of their offspring will be white
flowered?
What is question?
#1...TRUE/FALSE, the best way to write a conclusion is to use the RERUN method.?
#2...TRUE/FALSE, an example of an inference is “I saw it rain today.”?
#3...TRUE/FALSE, an example of a quantitative observation is “That is a red doll.”?
#4...TRUE/FALSE, a scientific hypothesis is written as “If [independent variable] Then [dependent variable.]”?
please answer all of them
. If you have 4.65 moles of H2 gas from: 2H2 + O2 → 2H2O
a. How much Oxygen is needed to completely react with hydrogen?
O2? =
b. How many moles of water will be produced?
H2O? =
As explained by kinetic theory, what causes gas pressure? *
A:The gain of energy from the collisions of gas particles with one another
B:The loss of energy from the collisions of gas particles with one another
C:The collisions between an object and rapidly moving gas particles
D:The weight of stationary gas particles upon a unit area of an object
Answer:
i think the answer is c
Explanation:
collission
How many joules are required to melt 250 grams of water
Answer:
i not sure but i searched it up and it said Q=104525J
Explanation:
Write the formula for diphosphorous pentoxide
Answer:
P4O10
Explanation:
If 18.00 mL of 0.1000 M magnesium hydroxide reacts with 10.00 mL of hydrochloric acid, what is the molarity of the acid solution?
Answer:
0.36M HCl
Explanation:
The reaction of Mg(OH)₂ with HCl is:
Mg(OH)₂ + 2HCl → MgCl₂ + 2H₂O
Where 1 mole of magnesium hydroxide reacts with 2 moles of HCl
To solve this question, we need to find the moles of Mg(OH)₂ that reacted and, with chemical equation, solve for the moles of HCl and its molarity (Using the 10.00mL = 0.01000L) as follows:
Moles of Mg(OH)₂:
18mL = 0.018L * (0.100mol / L) = 0.0018 moles Mg(OH)₂
Moles HCl:
0.0018 moles Mg(OH)₂ * (2 moles HCl / mol Mg(OH)₂) = 0.0036 moles HCl
Molarity HCl:
0.0036 moles HCl / 0.0100L =
0.36M HClWhat term is used when heat is transferred from one piece of matter to another until they are of equal temperature?
thermal contact
When heat flows from one object or substance to another it is in contact with, the objects or substances are said to be in thermal contact. The state where objects in thermal contact with each other reach the same temperature, no heat flows between them.
The red outlined elements have what major characteristics in common?
1 point
Metals, Nonmetals, and Metalloids
One major characteristic they have in common is they are metals.
The correct IUPAC name for the following molecule is: _________
a) trans-2,3-dichloro-5-methyl-2-hexene
b) trans-2,3-dichloro-5-methyl-3-hexene cis-2,3-dichloro-5-methyl-3-hexene
c) trans-4,5-dichloro-2-methyl-4-hexene cis-4,5-dichloro-2-methyl-4-hexene
Answer:
A.) trans-2,3-dichloro-5-methyl-2-hexene
Explanation:
The proposed question and structure has been attached to this answer.
The cis- and trans- isomers are used to denote the alignment of the functional groups to the carbon chain side. From the diagram, we see that:
the two chloro groups on the main compound are in opposite directions (-trans), and not the same sides (-cis)The bottom extended methyl group is on the 5th carbon as we count from left to rightthere's a total of 6 carbon atoms with 1 double bond on the second to third carbon.Hence the name trans-2,3-dichloro-5-methyl-2-hexene
THE OH BOND IN WATER IS POLAR BECAUSE
Answer: In the case of water, we know that the O-H covalent bond is polar, due to the different electronegativities of hydrogen and oxygen. Since there are two O-H bonds in water, their bond dipoles will interact and may result in a molecular dipole which can be measured.
Explanation:
A gas sample occupies 4.39 L at 44 ºC. What will be the new volume, using Charles’ Law, if the temperature decreases to 25 ºC?
Hi there! :)
[tex]\large\boxed{x = 2.49 L}[/tex]
Use the proportion for Charles' Law where:
[tex]\frac{v_{1}}{t_{1}}= \frac{v_{2}}{t_{2}}[/tex]
v1 = initial volume
t1 = initial temperature
v2 = final volume
v2 = final temperature
Substitute in the given values into the proportion:
v1 = 4.39 L
t1 = 44° C
t2 = 25°C
v2 = x L
Set up the proportion:
[tex]\frac{4.39}{44} = \frac{x}{25}[/tex]
Cross multiply:
[tex]25 * 4.39 = 44x\\\\109.75 = 44x\\\\x = 2.49 L[/tex]
Answer:
The new volume will be approximately 2.49 L.
Explanation:
We are given that a gas sample occupies 4.39 L at 44° C.
We are also given that we are going decrease the temperature to 25° C.
Charles' Law has a formula which shows the relationship between the volumes of a samples and the temperatures of the samples.
The proportion is shown as:
[tex]\displaystyle \bullet \ \ \ \frac{V_1}{T_1} = \frac{V_2}{T_2}[/tex],
where V₁ and V₂ are the initial and final volume respectively and T₁ and T₂ are the initial and final temperature respectively.
This proportion can be used to determine what our unknown is. We need to know the final volume.
[tex]\displaystyle \frac{4.39 \ \text{L}}{44 \ \text{C}} = \frac{\text{x}}{25 \ \text{C}}\\\\\\\frac{4.39}{44} = \frac{x}{25}\\\\\\4.39 \times 25 = 44 \times x\\\\\\44x = 109.75\\\\\\\frac{44x}{44}=\frac{109.75}{44}\\\\\\x = 2.49432 \approx \boxed{2.49 \ \text{L}}[/tex]
Therefore, if we reduce the temperature to 25 °C, we will be reducing the volume of the substance to 2.49 L.
