A cyclist goes round a circular path of circumference 343 m in s. The angle made by him, with the vertical is
WITH STEPS PLZ

Answers

Answer 1

you need the number of seconds to calculate the distance. I'm assuming that the seconds were written in the question but you forgot to write the here, you can calculate the distance then and find the exact point where the cyclist stopped since you have the circumference. then you can find the angle (after finding the distance he cycled) by subtracting it from 360 since the circular path will have an angle of 360 degrees.

Answer 2

Although your question lacks some data A general answer is provided :

The angle made vertically  = 360° - x°

where x = angle at which the the cyclist stopped

and circumference of the circular path = Total Distance travelled by the cyclist

First step : determine the distance travelled by the cyclist vertically

circumference = 2*π*r

343 = 2*π * r

∴ r = 343 / ( 2π ) = 54.59

therefore distance travelled by the cyclist vertically = 54.59 * 2 = 109.18 m

Given that the time travelled is missing

assuming the angle to the distance travelled by the cyclist before it stopped vertically = 360° - x°  

This is because the Total angle of a circular path = 360°

Learn more about circular paths : https://brainly.com/question/24210487


Related Questions

how many significant figures 216 m

Answers

Answer:

Three

Explanation:

I hope this helps:)

List two factors that compression force depends on ​

Answers

The magnitude (size or numerical value) and the direction.

Hope this helps!!! :)


What kind of circuit is the one shown below?
A. Series
B. Parallel
C. Open
D. Combination

Answers

That's a parallel circuit. (B)

When current from Point-A reaches the 3-way intersection just to the right of Point-B, it has to make a choice:  Either turn left, go through B, and light the lower bulb, or go straight and light the upper bulb.

A circuit that has any "decision" points in it is a parallel circuit.  What happens in the real world is:  The current splits up.  Some of the current that reaches the intersection turns left toward Point-B, and the rest of it goes straight up.

A series circuit is one in which there's only one possible path all the way around.  There are no intersections of more than 2 roads, and no electron ever has to decide which way to flow.

An open circuit is one in which there's a break somewhere along the line and electrons can't jump across it.  It's like a railroad where a big piece is cut out of the track somewhere.  So no trains can travel on that route, and there's no current flowing anywhere in the circuit.

I'm not so sure about a "combination" circuit.  I guess you could give that name to a complicated circuit that has some series parts and some parallel-parts.  Personally, I'd call that a "series-parallel" circuit.  But it really doesn't matter right now.  Whatever the word means, the circuit in the picture is definitely not a "combination" circuit.

Answer:

B. Parallel Circuits

Explanation:

A parallel circuit is constructed by connecting the terminals of all the individual load devices so that the same value of voltage appears across each component. In a parallel circuit, charge divides up into separate branches such that there can be more current in one branch than there is in another.

hope i helped

Rearrange this equation so it equals d
v=dt

Answers

Answer:

Below

Explanation:

To solve for d rearrange the formula v = (d)(t) to:

  d = v / t

I'm not to sure if you are using different variables but usually in physics the formula for velocity is v = d / t not v = dt

If you wanted to solve for displacement you would do:

  d = (v)(t)

Hope this helps!

Answer the following questions 1 What is the difference between mass and weight of an object. Will the mass and weight of an object on the earth be same as their values on Mars ? Why? ​

Answers

Answer:

difference between mass and weight is that mass is amount of matter in a material while weight is a measure of how the force of gravity acts upon that mass.the mass of an object will be same on earth and mars but its weight on both planets will be different.

Define measurement with 10 points

Answers

Answer:

the process of comparing unknown quantities with known standards quantities are known as measurement

Why does the weight of a body differ on different celestial bodies of the universe?​

Answers

An object's weight is dependent on its mass and how strongly gravity pulls on it. The strength of gravity depends on how far away one object is from another.

the weight of a body is 420 newton.calculate it's mass​

Answers

Answer:

42g

Explanation:

the mass of a body is given by

m=weight/gravity

=420/10

=42

I hope this helps

Given: F = k· m. g
Solve for "k"

Answers

Answer:

[tex]F = kmg \\ k = \frac{F}{mg} [/tex]

Explanation:

F = k . m . g

=> F = k . mg

[tex] = > k = \frac{F}{mg} (ans)[/tex]

What do is mean by environment friendly behaviour?​

Answers

Answer:
Being environmentally friendly means having a lifestyle that is better for the environment

A converging lens of focal length 20cm, forms a real image twice the size of the object. Calculate:
i) the power of the lens;
ii) the position of the image.

Answers

Answer:

Solition given:

focal length(f)=20cm

size of image(v)=2x

size of object(u)=x

we have

power of lens= reciprocal to focal length=1/20=0.05/cm

ii.

the position of the image is beyond C.

Explanation:

See the attachment !!!!!!!

Saul is testing an installation and discovers a short circuit what’s causing this
A.high current

B.high voltage

C.low resistance

D.low voltage

Answers

Answer:
C. Low resistance

Answer:

im pretty sure that it's (A.) High current

Explanation:

pf

not 100% sure, tho

mercury is commonly used in thermometer give reasons​

Answers

Answer:

hi

BECAUSE MERCURY IS USED BECAUSE IT is the only liquid available in room temperature

Explanation:

pls mark as a BRAINLIST

define 1 second time​

Answers

Answer:

define 1 second time

One second is the time that elapses during 9,192,631,770 (9.192631770 x 10 9 ) cycles of the radiation produced by the transition between two levels of the cesium 133 atom. ... One second is equal to 1/86,400 of a mean solar day.

Answer:

One part of 86400 part of a day is called one second time.

✌✌✌✌

20. A semiconductor is a
A) crystalline solid that conducts current under any condition
B) metallic solid that conducts current under any condition
C) metallic solid that conducts current under certain conditions
D) crystalline solid that conducts current under certain conditions

Answers

Answer:

D) crystalline solid that conducts current under certain conditions

Explanation:

A semiconductor is any crystalline solid material whose electrical conductivity is intermediary between that of insulators and conductors. That is, a semiconductor does not conduct like a conductor but does more than an insulator.

Based on this, a semiconductor is said to only conduct electricity under certain conditions as opposed to conductors that do so under any condition. Example of semiconductors are silicon, carbon, antimony, arsenic etc.

What is not one of the main uses of springs?
A. Bike suspension
B. The seasons
C. Clock making
D. Car suspension

Quick answer

Answers

Answer:

b. the seasons

Explanation:

1. How much heat energy ( Q ) is required to heat 2.0 kg of copper from 30.0 oC to 80.0 oC?

Answers

Answer:

38500

Explanation:

I looked it up so it may be wrong

why Fossil fuel has been used more in the existing world ?​

Answers

Fossil fuels are found most of the part of the world .It can be found easily by the people.It is free of cost or low cost.Thats why people can find it easily and in low cost.Also it is easy to useSo fossil fuel has been used more in existing world

derive an expression for resistivity of conductor of length l and area of cross section A​

Answers

Answer

Resistivity R = K * L / A    where resistivity is constant for material, L the length of the material and A the area of the material

K = R * A / L     where R is the resistance of the material

define Neutons 3rd law .​

Answers

Answer:

that when two object interact, they apply forces to one another that are equal in magnitude and opposite in direction.

Explanation:

Newton's third law: the law of action and reaction

why is it important to have regular super vision of the weights and the measurements in the market?

Answers

Answer:

Obeying to weights & measurement regulations in both national and international metrology legislation, standards and test procedures is a requirement to participate in any market because it's aimed to safeguard the consumers and promote fair competition, which provides efficiency and saves unnecessary costs to U.S. businesses and stakeholders.

Explanation:

In the U.S., the National Institute of Standards and Technology (NIST) has an Office of Weights and Measures (OWM) that represents the country in the International Organization of Legal Metrology (OIML)

define electrical resistance in a metal conductor​

Answers

Answer:

Resistance is defined as the property of a conductor to resist the flow of charges through it. The resistance of conductor is numerically given as the ratio of potential difference across its length to the current flowing through it.

Explanation:

Ag,Au and Cu are called coinage metals why plzzzz hurry its urgent plzzz​

Answers

Answer:

This is because these metals are used for minting (making) coins.

Answer:

It is bcz it is used for making coins

Un muelle se alarga 20 cm cuando ejercemos sobre él una fuerza de 24 N. Calcula:El valor de la constante elástica del muelle

Answers

Answer:

120 Nm-1

Explanation:

Según la ley de Hooke;

F = Ke

F = fuerza sobre el resorte

K = constante de fuerza

e = extensión

Por eso;

K = F / e

K = 24N / 20 × 10 ^ -2m

K = 120 Nm-1

the slope of a line on a position vs time graph is the

a. velocity
b. time
c. distance
d. displacement

Answers

It's the velocity, but only the magnitude. It can't show the direction of the velocity. So it's better to call it speed.

Does water exist on Mars? Explain your answer. Why didn't Jupiter become a star during the early.​

Answers

Answer:

yes water was discovered in mars

Two forces whose resultant is 100N are at right angle to eachother. if one of them makes an angle of 30° with the resultant, determine its magnitude​

Answers

Let F₁ and F₂ denote the two forces, and R the resultant force.

F₁ and F₂ point perpendicularly to one another, so their dot product is

F₁ F₂ = 0

We're given that one of these vectors, say F₁, makes an angle with R of 30°, so that

F₁ • R = ||F₁|| ||R|| cos(30°)

But we also have

F₁ • R = F₁ • (F₁ + F₂) = (F₁ F₁) + (F₁ F₂) = F₁ F₁ = ||F₁||²

So, knowing that ||R|| = 100 N, we get that

(100 N) ||F₁|| cos(30°) = ||F₁||²

(100 N) cos(30°) = ||F₁||

||F₁|| ≈ 86.6 N

(And the same would be true for F₂.)

what give negative acceleration ?

Answers

Answer:

But negative acceleration means that the rate of change of velocity is negative or velocity decreases. Example: (1) When we apply brakes in a moving car, then negative acceleration acts on it and the car stops. (2) When we throw a ball upwards, then also negative acceleration acts on it.

Explanation:

If it helps you mark me as a brainleast

MATHEMATICALLY A NEGATIVE ACCELERATION MEANS YOU WILL SUBTRACT FROM THE CURRENT VALUE OF THE VELOCITY.

2. ¿Puede haber trabajo en un sistema si no hay movimiento
a. Sí, si hay una fuerza siempre.
b. Sí, ya que el movimiento es sólo relativo.
c. No, ya que un sistema que no se mueve no tiene energía.
d. No, porque la ecuación de trabajo lo define.

Answers

Answer:

d. No, porque la ecuación de trabajo lo define.

Explanation:

En Física, el trabajo realizado se puede definir como la cantidad de energía transferida cuando un objeto o cuerpo se mueve a lo largo de una distancia debido a la acción de una fuerza externa.

Matemáticamente, el trabajo realizado viene dado por la fórmula;

[tex] W = F * d [/tex]

Dónde;

W es el trabajo realizado.F representa la fuerza que actúa sobre un cuerpo. d representa la distancia recorrida por el cuerpo.

Por lo tanto, podemos deducir de la definición de trabajo y su fórmula que el trabajo se realiza cuando un objeto (cuerpo) se mueve una distancia o experimenta cualquier forma de desplazamiento mientras transfiere energía.

The fluid inside the hydraulic jack has a pressure of 30,000 Pa. If the surface of
the piston that is used to lift an object is 0.1 m’in area, how much weight can
the jack lift?​

Answers

Explanation:

p = F /A

F = P×A

F = 30,000 Pa / 0.1 m²

F = 300,000 N

Other Questions
lowkey need help with this. Why should I represent my school at homecoming?Please answer ASAP Language Arts, FictionQuestion 2Characters that are not well-developed and sometimes stereotyped. Solve 7 ( x + 1 ) + 2 = 5x + 15 an atom that gained an electron is called _____ stock is the number of shares that a corporation's charter allows it to sell. The number of these shares usually exceeds the number of shares issued (and outstanding), often by a large amount. Which points are possible approximations for this system? Select two options. 3(8a - 5b) 2(a + b); use a = 3 and b = 2 corto anlisis filosfico sobre qu es alienacin Write balanced equations for the reaction of each of the following carboxylic acids with NaOH. Part A formic acid Express your answer as a chemical equation. A chemical reaction does not occur for this question. Request Answer Part B 3-chloropropanoic acid Express your answer as a chemical equation. nothing A chemical reaction does not occur for this question. o Whats the Difference Between Non-Formal and Informal Learning Answer is D , others say its 64 but I got it wrong solve this set of equation, using elimination or substitution method. What is the speaker's attitude towards war ? ( The gift at war time ) A sample of gas occupies 1.2 L at 12.0oC. Assuming pressure remains the same, what would be the volume (in L) of this gas at 67oC? A. 1.4 B. 1.0 C. 0.2 D. 5.0 E. 6.7 The Piedmont region is labeled on the map.The mountains region is labeled on the map.The area labeled C is known as the .The easternmost area on the map is known as the . Ken needs a surgery on his foot. The estimated cost of the surgery is $5,000. The insurance policy provided by Ken's company has $500 deductible and 20% co-pay. How much will Ken have to pay for foot surgery? Need tha answer explained This year, a small business had a total revenue of $42,900 . If this is 35% less than their total revenue the previous year, what was their total revenue the previous year? ac circular runway has a radius of 100 m.Find the distance covered by a person in one complete rotation .