Answer:
The appropriate answer is "1.96 mol".
Explanation:
The given values are:
Volume,
V = 26.5 L
Pressure,
P = 1.7 atm
Temperature,
T = 280 K
Now,
The number of moles (n) will be:
= [tex]\frac{PV}{RT}[/tex]
By substituting the values, we get
= [tex]\frac{1.7\times 26.5}{0.0821\times 280}[/tex]
= [tex]\frac{45.05}{22.988}[/tex]
= [tex]1.96 \ mol[/tex]
Draw the structure of the alkene with the molecular formula C6H10 that reacts with Br2 to give this compound.
Answer: Please, this question is not complete. I have attached the complete question.
The answer is in the attached picture below
Explanation:
The explanation is in the attached picture below
The structure of the alkene with the molecular formula [tex]C_6H_1_0[/tex] that reacts with [tex]Br_2[/tex]to give this compound is an alkene called 1-hexene
How do we explain?The alkene is called 1-hexene. It has a double bond between the first and second carbon atoms. When it reacts with Br2, the bromine atoms add to the double bond, resulting in the formation of 1,2-dibromohexane.
The reaction is a radical addition reaction. The first step is the formation of a radical by the homolytic cleavage of one of the bromine atoms in Br2. This radical then adds to the double bond in the alkene, forming a new radical. The second bromine atom then adds to the radical, forming 1,2-dibromohexane
Learn more about addition reaction at:
https://brainly.com/question/1433809
#SPJ6
17. The density of a population would influence which limiting factor?
O niche
O growth rate
O weather
O space
Answer:
The answer is growth rate
Explanation:
it will help you
In an exothermic chemical reaction:____.
A. The mass of the products is greater than the mass of the reactants.
B. The mass of the products is less then the mass of the reactants.
C. Heat is released as the reaction proceeds.
D. Heat is absorbed as the reaction proceeds.
Answer:
C
Explanation:
Think of 'exo' as exit and 'thermic' as relating to thermal energy/ heat. Thus, an exothermic release thermal energy as the reaction proceeds.
In an exothermic reaction, the total energy of the products is lesser than that of the reactants and ΔH (change in energy) is less than zero.
When heat is absorbed as the reaction proceeds, the chemical reaction is an endothermic reaction.
Zn-64 = 48.63%
Zn-66 = 27.90%
Zn-67 = 4.10%
Zn-68 = 18.75%
Zn-70 = .62%
Calculate the average atomic mass/given their percent abundance
Answer:
A = 65.46 u
Explanation:
Given that,
The composition of zinc is as follows :
Zn-64 = 48.63%
Zn-66 = 27.90%
Zn-67 = 4.10%
Zn-68 = 18.75%
Zn-70 = .62%
We need to find the average atomic mass of the given element. It can be solved as follows :
[tex]A=\dfrac{48.63\times 64+27.90\times 66+4.1\times 67+18.75\times 68+0.62\times 70}{100}\\A=65.46\ u[/tex]
So, the average atomic mass of zinc is 65.46 u.
Aluminum hydroxide, with heat, creates____
Answer:
Water and Aluminium oxide
Explanation:
Have a nice day.
A chemistry student needs 90.0mL of carbon tetrachloride for an experiment. By consulting the CRC Handbook of Chemistry and Physics, the student discovers that the density of carbon tetrachloride is 1.59g*cm3- Calculate the mass of carbon tetrachloride the student should weigh out. Be sure your answer has the correct number of significant digits.
Answer:
volume = mass/density
Here, volume = 80g/1.59gcm-3 → 50.314 cm3
Explanation:
In the context of small molecules with similar molar masses, arrange the intermolecular forces by strength.
a. London dispersion forces
b. hydrogen bonding
c. dipole-dipole interactions
Answer:
Hydrogen bonding - London dispersion forces - dipole-dipole interactions
Strongest ----> Weakest
Which is the primary type of radiation from the sun that is absorbed by the ozone layer?
A. infrared radiatin
B. UV-B
C. X-rays
D. UV-C
E. UV-A
the answer to the question is B.UV-B
PLEASE HELP!!
Solutions Pre-Lab Questions:
In this lab, you will make fruit drinks with powdered drink mix. Complete the pre-lab questions to get the values you need for your drink solutions.
1. Calculate the molar mass of powered fruit drink mix, made from sucrose (C12H22O11).
2. Using stoichiometry, determine the mass of powdered drink mix needed to make a 1.0 M solution of 100 mL.
(Hint: Use molarity = to find the moles of drink mix, then convert moles to grams using a mole conversion.)
3. What mass of powdered drink mix is needed to make a 0.5 M solution of 100 mL?
Answer:
Explanation:
C₁₂H₂₂O₁₁
1 )
Molar mass = 12 x 12 + 22 x 1 + 11 x 16
= 144 + 22 + 176
= 342 g
2 )
100 mL of 1.0 M will contain 1.0 x0.100 = .1 mole of sucrose
0.1 mole of sucrose = 0.1 x 342 g = 34.2 g of sucrose.
So , mass of sucrose required is 34.2 g .
3 )
100 mL of .5 M sucrose = .100 x .5 mole of sucrose
= .05 mole of sucrose
.05 mole of sucrose = .05 x 342 g = 17.1 g of sucrose .
So , mass of sucrose required is 17.1 g .
True/False: Chemical reactions can NOT proceed in the reverse direction
What mass of steam initially at 120oC is needed to warm 200g of water in a glass container from 20.0 oC to 50.0 oC
Complete question:
What mass of steam initially at 120 ⁰C is needed to warm 200g of water in a 100 g glass container from 20.0 oC to 50.0 ⁰C
Answer:
the initial mass of the steam is 10.82 g
Explanation:
Given;
mass of water, m₁ = 200 g
mass of the glass, m₂ = 100 g
temperature of the steam = 120 ⁰C
initial temperature of the water, 20⁰ C
final temperature of the water, = 50⁰ C
let the mass of the steam = m
specific heat capacity of water c = 1 cal/g ⁰ C
specific heat capacity of glass c₂ = 0.2 cal/g ⁰ C
laten heat of vaporization of steam L = 540 cal/g
Apply principle of conservation energy;
Heat given off by the steam = Heat absorbed by water + heat absorbed by glass
[tex]mc\Delta T_1 + mL + mc\Delta T_2 = m_1c\Delta T_3 + m_2c_2\Delta T_3\\\\mc\Delta T_1 + mL + mc\Delta T_2 = [m_1c + m_2c_2]\Delta T_3[/tex]
m(1) (120 - 100) + m(540) + m(1) (100 - 50) = [200(1) + 100(0.2)] (50 - 20)
20m + 540m + 50m = 6600
610 m = 6600
m = 6600 / 610
m = 10.82 g
Therefore, the initial mass of the steam is 10.82 g
formula of
Al³⁺ and SO₄²⁻
Answer:
The formula of Al³⁺ and SO₄²⁻ is aluminum sulfate.
Explanation:
The formula for aluminum sulfate is Al₂(SO₄)₃. If we say in terms of ions. The ions are Al³⁺. It is a positive ion or the cation. Other ion is SO₄²⁻. It is sulfate ion. It is anion.
Aluminum sulphate is used in water purification and as a mordant in dyeing and printing textiles.
Hence, the formula of Al³⁺ and SO₄²⁻ is aluminum sulfate.
what following oxide react with both acids and bases to form salts.
Answer:
mainly metal oxide use to react with both acid and bases to form salts such as zinc, aluminum etc.
An ice freezer behind a restaurant has a freon leak, releasing 47.97 g of C2H2F3Cl into the air every week. If the leak is not fixed, how many kilograms of fluorine will be released into the air over 6 months
Answer:
0.554 kg
Explanation:
We want to find the amount of kilograms of fluorine that will be released into the air over 6 months.
Let's convert to weeks to get;
6 × 4 = 24 weeks
Let's find Mass leak rate of fluorine from the formula;
Mass leak rate = (fluorine mass in freon/molar mass of freon) × leak rate
Molar mass of freon = ((12 × 2) + (1 × 2) + (19 × 3) + (35.5)) = 118.5 g/mol
Thus;
Mass leak rate = ((19 × 3)/(118.5)) × 47.97 = 23.074 g/week
Total fluorine leaked in 6 months = 24 × 23.074 = 553.776 g = 0.554 kg
Which of the following was NOT explained by Dalton's atomic theory?
ANSWER:
A. the Law of Multiple Proportions
B. the difference between elements and compounds
C.?the difference between isotopes of an element
D. the Law of Conservation of Mass
Answer:
A. the Law of Multiple Properties
Answer:
A. the law of multiple proportions
If mercury barometer is replaced by water barometer, height of water column
i. will be less than that of Hg Column
ii. will be greater than that of Hg column iii. will be equal to that of Hg column
iv. will be none of these
Answer:
answer is first one 1 will be less then that of hg coloumn
What is the law of multiple proportions?
A. The proportion of elements to compounds is constant.
B. All elements are found in equal proportions in nature.
C. Different compounds may contain the same elements but may have different ratios of those elements.
D. All compounds contain the same elements in the same proportions.
5. The Rf of ibuprofen was found to be 0.32 when t-butyl methyl ether was used as the development solvent. What effect would there be on the Rf of ibuprofen if acetone had been used to develop the TLC plate?
Answer:
The Rf value of ibuprofen increases
Explanation:
TLC involves the elution of a solute using a mobile phase(solvent). The stationary phase is made of an adsorbent such as silica.
The extent of interaction between the solute and the mobile phase affects the Rf value. The greater the interaction between the solute and the solvent, the greater the Rf value.
On the other hand, the polarity of the solvent and the solute also affects the Rf value. If the solvent is changed from t-butyl methyl ether to acetone, the Rf value for ibuprofen increases because ibuprofen is polar and acetone is also polar hence there is greater interaction between the solvent and solute.
How many grams of boiling water must be added to an insulated cup containing 19 grams of ice, at 0oC, to completely melt the ice
Answer:
1900grams of boiling water
Explanation:
0,c=19
100,c=19×100
1900grams
A 15.4 mL aliquot of 0.204 MH3PO4(aq) is to be titrated with 0.17 MNaOH(aq). What volume (mL) of base will it take to reach the equivalence point?
Answer:
55.44L of the 0.17M NaOH are required
Explanation:
Phosphoric acid, H3PO4, reacts with NaOH as follows:
H3PO4 + 3NaOH → Na3PO4 + 3H2O
Where 1 mole of H3PO4 reacts with 3 moles of NaOH
To solve this question we need to find the moles of H3PO4 in the aliquot. Using the balanced equation we can find the moles of NaOH and its volume with the concentration (0.17M) as follows:
Moles H3PO4:
15.4mL = 0.0154L * (0.204mol/L) = 0.00314 moles H3PO4
Moles NaOH:
0.00314 moles H3PO4 * (3mol NaOH / 1mol H3PO4) = 0.009425moles NaOH
Volume NaOH:
0.009425moles NaOH * (1L/0.17moles NaOH) = 0.05544L 0.17M NaOH =
55.44L of the 0.17M NaOH are requiredConsider the following reaction at equilibrium. What effect will decreasing the temperature have on the system? DH=+890kJCO2(g)+2H2O(l)<--> CH4(g)+2O2(g)a) the equilibrium constant will increaseb) the reaction will shift to the left in the direction of the reactantsc) the reaction will shift to the right in the direction of the productsd) no effect will be observed
Answer:
Option B. The reaction will shift to the left in the direction of the reactants.
Explanation:
The equation for the reaction is given below:
CO₂ + 2H₂O <=> CH₄ + O₂
Enthalpy change (ΔH) = +890 KJ
The reaction illustrated by the equation is endothermic reaction since the enthalpy change (ΔH) is positive.
Increasing the temperature of an endothermic reaction will shift the equilibrium position to the right and decrease the temperature will shift the equilibrium position to the left.
Therefore, decreasing the temperature of the system illustrated by the equation above, will shift the reaction to the left in the direction of the reactants.
Thus, option B gives the right answer to the question.
Consider the balanced chemical equation below.
2 A ⟶ C + 4 D
How many moles of D would be produced if 6 moles of A were used?
Explanation:
[tex]here \: is \: your \: explanation : - \\ \\ given \: balanced \:equation \: = > \\ \\ 2 A=>C \: + \: 4D \\ \\ by \: this \: equation \: we \: get \: \\ \\ 2 \: moles \: of \: A \: produce \: 4 \: moles \: \\ \\ of \: D \\ \\ hence \: . \: 1 \: mole \: can \: produce \: = 4 \div 2 \\ \\ = > 2 \: moles \: \\ \\ so \: if \: 6 \: moles \: of \: A \: used \: then \: \\ \\ amount \: of \: D \: produced \: = (6 \times 2) \\ \\ = > 12 \: moles \: of \: D \\ \\ \mathcal\blue{ Hope \: it \: helps \: you \: (. ❛ ᴗ ❛.) }[/tex]
Explain why the balls representing fluorine (teal) and hydrogen (white) have only one peg, while carbon (black) has four.
Answer:
Hydrogen and fluorine form only one bond while carbon forms four bonds to other atoms.
Explanation:
This question brings us to the idea of valency. Fluorine is univalent while carbon is tetravalent.
Univalent means that fluorine can only form one bond to hydrogen while carbon forms as much as four bonds because it is tetravalent.
Hence fluorine and hydrogen have only one peg while carbon has four.
How does science help us understand events in the natural world, and what is chemistry's role in understanding these interactions?
Answer:
See explanation
Explanation:
Science as a body of knowledge seeks to understand the processes that occur in nature so as to offer plausible explanations to those processes as well as redesign nature for our benefit.
Hence, science is an inquiry into nature with the aim to improve the life of the general population of the world.
Chemistry is the study of matter and the changes that matter undergoes. Chemistry lies at the very foundation of science since changes in matter is the basis for the processes that occur in nature.
Hence, chemistry plays a critical role in understanding nature as well as amending nature to improve the living condition of the world's rapidly growing population.
Question 1
1 pts
How many mols of bromine are present in 35.7g of
Tin(IV) bromate?
Answer:
n = 0.0814 mol
Explanation:
Given mass, m = 35.7g
The molar mass of Tin(IV) bromate, M = 438.33 g/mol
We need to find the number of moles of bromine. We know that,
No. of moles = given mass/molar mass
So,
[tex]n=\dfrac{35.7}{438.33}\\\\n=0.0814\ mol[/tex]
So, there are 0.0814 moles of bromine in 35.7g of Tin(IV) bromate.
Draw the Lewis structure for the polyatomic formate anion. Be sure to include all resonance structures that satisfy the octet rule.
Answer:
Lewis structure of polyatomic formate anion.
Explanation:
To draw Lewis structure for any chemical species,
1)Count the total number of valence electrons present in it.
This can be obtained by adding valence electrons of each constituent atom.
2)Arrange those valence electrons in such a way that each atom should attain eight electrons around it to satisfy octet theory.
The structure of formate ion and its Lewis structure are shown below:
HCOO- is the formate ion.
It has total:
1+4+6+6+1 = 18 valence electrons.
Since, hydrogen has one, carbon has four and oxygen has six valence electrons and the charge of the anion is one.
Arrange this 18 electrons in such a way that each atom should get 8 electrons around it.
Resonance structures of formate ion:
The position of the equilibrium for a system where K = 6.4 × 10 9 can be described as being favoring ________________
Answer:
to the right (products side)
Explanation:
The equilibrium constant K describes the ratio between the concentration of products and reactants at equilibrium. For a general reaction:
a A + b B → c C + d D
The equilibrium constant expression is:
[tex]K = \frac{[C]^{c} [D]^{d} }{[A]^{a} [B]^{b} }[/tex]
A low value of K indicates that the concentration of products (C and D) is low in relation with the concentration of reactants (A and B).
Conversely, a high value of K indicated that the concentration of products is high compared with the concentration of reactants.
Since K = 6.4 × 10⁹ is a high value, the concentration of products is higher than the concentration of reactants at equilibrium. Thus, the position of the equilibrium is favored to the right.
c. rubidium sulfate
2. Write balanced molecular equation, complete ionic equation, and net ionic
equations for the mixing of the following solutions. Show states. If no reaction
occurs, show the ionic equation. (8 marks)
a.
NaNO3 +
Ag2SO4 → AgNO3 + Na2SO4
Complete and balance the equations for the given single displacement reactions. Write the reaction in molecular form. Phases are optional. If you need to clear your work and reset the equation, click the CLR button.Li(s) + H2O---------- Ca(s) + H2O ---------------
Answer:
Li(s) + H2O(l) -----> LiOH(aq) + H2(g)
Ca(s) + 2H2O(l) ---------------> Ca(OH)2(aq) + H2(g)
Explanation:
Metals react with water to yield the metal hydroxide and hydrogen gas as shown in the answer above.
The reaction equations were balanced, the number of atoms of each element on both side of the reaction equation is exactly the same.
This is the way to write a balanced reaction equation for the species shown in the question.
In the titration of NaOH with vinegar, a student overshot the endpoint (i.e. added too much NaOH solution). How will this affect the calculate percent acetic acid in the vinegar
Answer:
Overshooting the endpoint leads to a percent acetic acid in vinegar higher than the correct value.
Explanation:
When too much NaOH solution is added, the resulting number of equivalent hydronium (OH⁻) will be higher than what it is in reality. This would directly lead to the number of acetic acid moles in the vinegar being found higher than normal.
In other words, overshooting the endpoint leads to a percent acetic acid in vinegar higher than the correct value.