A direct-mapped cache holds 64KB of useful data (not including tag or control bits). Assuming that the block size is 32-byte and the address is 32-bit, find the number of bits needed for tag, index, and byte select fields of the address.

Answer:

This approach is not the same as letting the client execute a normal RPC

Explanation:

This approach is not the same as letting the client execute a normal RPC and this is because an asynchronous RPC sends an additional message across the network after the initial call/message is sent by the sender to the client. this additional message sent through the network is directed towards the sender of the initial call/message as an acknowledgement of the receipt of the initial message by the client .

synchronous RPC is made of two asychronous RPCs, hence the client executing a normal RPC  will not establish a reliable communication between the client and the sender as asynchronous RPC would

Answer:

the issued Automatic Private IP Addressing (APIPA) address.

Explanation:

Since we are told that the user was able to access the network resources yesterday, and all the network equipment in the user's computer is functioning properly, there is a very high possibility that because the user's computer has been issued an Automatic Private IP Addressing (APIPA) address, it affected his computer's ability to connect to a public network.

This is the case because private network IP addresses are known to prevent inflow and outflow of data onto public networks.

Explanation:

Exterior gateway protocol are the routing protocols that are used on the internet for exchanging routing information among the autonomous system. These autonomous systems can be gateway protocol, vector routing protocol.

The protocol that communicates data between routers representing the edges of autonomous systems is called Exterior Gateway Protocol (EGP).

Here,

An autonomous system (AS) is a collection of routers that are under a single administrative domain and have a common routing policy. These autonomous systems can be Internet Service Providers (ISPs), large organizations, or even smaller networks.

EGP is specifically designed to exchange routing information between routers that are at the edges of these autonomous systems. It allows routers in different autonomous systems to communicate with each other and share information about the best paths to reach various network destinations.

Know more about Autonomous system,

https://brainly.com/question/30240559

#SPJ6

Answer:

This is a management system in wireless communication that oversees radio resources and crosstalks between two radio transmitters which make use of the same channel.

Explanation:

Radio Resource Management is a management system in wireless communication that oversees radio resources and crosstalks between two radio transmitters which make use of the same channel. Its aim is to effectively manage the radio network infrastructure. Its advantages include;

1. It allows for multi-users communication instead of point-to-point channel capacity.

2. it increases the system spectral efficiency by a high order of magnitude. The introduction of advanced coding and source coding makes this possible.

3. It helps systems that are affected by co-channel interference. An example of such a system is the wireless network used in computers which are characterized by different access points that make use of the same channel frequencies.

Answer:

Automation

Explanation:

Answer:

The answer is "associate".

Explanation:

The two-year post-school degree is also known as the associate degree, in which the students pursuing any of this degree, which may take as little as 2 years to complete the course, although many prefer to do it at the same rate. Its first two years of a Bachelor (fresh and sophomore years) were covered by an Associate degree.

Answer:

Big data is defined as the extremely large data set that may be analysed computationally to reveal pattern,trends and associations, related to human behaviour and interaction.

Machine learning is a sub area of artifical intelligence where by the terms refers to the ability of IT system to independently find the solution to problem by reconnaissance pattern in databases.

The one advantage of bigdata is

To ensure hire the right employees.

The application of bigdata data is

to communicate media application nd entertainment

Answer:

Tracking and Review features.

Explanation:

Tracking and Review are used to show detailed Markup when reviewing a document to make some changes to it.

To reveal detailed Markup, select REVIEW, then select VIEW OPTION from the Review list.

A Simple Markup shows a red line to where changes have already been made.

All Markup shows different person's edits in different colors of texts.

Answer: APIPA

Explanation:

Automatic Private IP Addressing (APIPA) is a Windows based operating systems feature that allows a computer to assign itself automatically to an IP address even though there is DHCP server to perform the function.

From the information that has been provided in the question, we can see that the type of address that is used is APIPA.

Answer:

Following are the code to this question:

import java.util.*; //import package for user input

class RetailItem//defining class RetailItem  

{

private String desc;//defining String variable

private int unit;//defining integer variable

private double prices;//defining double variable

RetailItem()//defining default Constructor

{

   //Constructor body

}

Output:

The Sub Total value: 199.75

The Sales Tax value: 11.985

The Total value: $211.735

Explanation:

In the above code three class "RetailItem, CashRegister, and Main" is defined, in the class "RetailItem", it defines three variable that is "desc, unit, and prices", inside the class "get and set" method and the constructor is defined, that calculates its value.

In the next step,  class "CashRegister" is defined, and inside the class parameterized constructor is defined, which uses the get and set method to return its value.  

In the next step, the main class is declared, in the main method two-class object is created and calls its method that are "getSubtotal, getTax, and getTotal".  

There is some technical error that's why full code can't be added so, please find the attached file of code.  

Answer:

Basic characteristics of OOAD and compression with SAD can be defined as follows:

Explanation:

The Object-oriented analysis is described as a design and analysis system like an application, that uses Oops programming. It is the measurement model, that is the presentation, which became a part of the object-based review.  

The features of OOAD can be defined as follows.  

The difference in OOAD and SAD can be defined as follows:

Answer:

The answer varies from person to person.

Explanation:

All kinds of people are using Word, so people would recognize if the answer if plagiarized. So, simply answer truthfully; no matter h1ow embarrasing.

The Microsoft word skills that I will need to improve upon the most is how to be faster when typing.

It should be noted that the Microsoft word skill that I am mostly confident in performing is the creation of word documents and text formatting.

Lastly, Microsoft word processing skills have affected my overall writing skills on the job as it has helped in improving my writing and grammar.

Learn more about Microsoft on:

https://brainly.com/question/20659068

Answer:

CREATE VIEW InvoiceBasic  AS

SELECT VendorName, InvoiceNumber, InvoiceTotal  

FROM Invoices JOIN Vendors ON Invoices.InvoiceID = Vendors.VendorID  

WHERE left(VendorName,1) IN ('N' , 'O ' , 'P' )

Explanation:

CREATE VIEW creates a view named InvoiceBasic  

SELECT statements selects columns VendorName, InvoiceNumber and InvoiceTotal   from Invoices table

JOIN is used to combine rows from Invoices and Vendors table, based on a InvoiceID and VendorsID columns.

WHERE clause specified a condition that the first letter of the vendor name is N, O, or P. Here left function is used to extract first character of text from a VendorName column.

Answer:

Kindly see explanation

Explanation: The operating system is a huge part of a computer system which plays a an invaluable role in the working of computer programs, hardwares and influences the overall experience of the user. It operating system serves as the interface between the computer hardware itself and the user who may wish to perform different tasks using a computer. In other to teach and learn, it is necessary to input and also obtain output, store our files and process and most essentially one may need to install application programs or softwares, all these functions are made possible with the help of an operating system. In essence, a system without an operating system can perform very little to no function at all. So basically teaching and learning becomes difficult. Teaching and Learning tools such as video, writing and other application softwares cannot be installed without an operating system and thus teaching or learning becomes impossible in it's absence.

Answer:

def inputNumber():

   l = []

   num = int(input("Enter the number of integers you want to enter\n"))

   for i in range(0,num):

       print("Enter the ", i+1, " integers ")

       a = float(input())

       l.append(a)

   return l

def averageCalculator(l):

   total = 0

   for i in l:

       total += i

   avg = total/len(l)

   return avg

def printoutput(avg):

   print("The average of numbers is ", avg)

l = inputNumber()

avg = averageCalculator(l)

printoutput(avg)

Explanation:

A subprogram may be considered as a method where we pass some values in the arguments and return some value.

The answer is written in python language, where we have used

inputNumber() subprogram to get the input from the user.

function averageCalculator() to calculate the average.

printoutput() subprogram to print the output or the average of the numbers.

Please refer to the attached image for better understanding of the indentation of code.

Now, let us learn about them one by one:

inputNumber(): We get the number of values to be entered as an integer value and then get the numbers as float.

Store the values in a list and return the list to the caller main program.

averageCalculator(l): Contains a list as argument as we got from inputNumber(). It sums all the numbers and divides with total number to find the average. Returns the average value to the caller main program.

printoutput(avg): Contains an argument which is the average calculated in the averageCalculator(). It prints the argument passed to it.

Answer:

i would check all connections from the hard drive and power supply and check your motherboard for any missing sauters and or loose no contact connections

Explanation:

Answer:

Here is the Python program:

def input_type(input_string): #function that takes a string as input and returns the type of that string

   try:   #used to test a block of code for input string type              

       if type(eval(input_string)) == float: #if the type of the string is float

           return "float" #function returns float

       elif type(eval(input_string)) == int: #else if the type of the string is int

           return "integer"#function return integers

       elif type(eval(input_string)) == bool:#else if the type of the string is bool

           return "boolean" #function return boolean

   except: #if the type of the string is neither int, bool nor float

       return "string" #function return boolean

#following statements are used to  test the working of the above function

print(input_type(" ")) #prints string

print (input_type ("False")) #prints boolean

print (input_type ("7.432621")) #prints  float

print (input_type("2788"))#prints int

Explanation:

The function input_type() takes a user input and returns the type of that string input the user entered. The user input can be one of the following types:

int which is the data type of an integer for example 1, 2, 3 etc

float which is the data type of a floating point number for example 1.2, 3.4 etc

bool which is the data type of a boolean for example True or False

string that can be characters for example an empty space character " "

try block here is used to generate an exception and it is used to test a block in the code that checks for the type of the user input. The except block here is used to handle that error. This is executed when the try part raises an error.

Inside the try block, the if and elif statements check the type of the string.

if type(eval(input_string)) == float: statement checks if the type of the string is float. Here the eval() method is used to convert the input string because the user input is basically a string value. So this method evaluates the input_string.

type() method is used to return the type of that evaluated user input string. If condition checks if type(eval(input_string)) which is the type of the evaluated input string is equal to float. If this condition evaluates to true then the function returns "float" otherwise it moves to the next elif statement. Similarly the type of the user input is checked for int in elif part and if both these if and elif conditions evaluate to false then the next elif statement is executed that checks the user input to be bool. If all these three if elif statements evaluate to false then the except part executes which returns "string". The program along with its output is attached in a screenshot.    

Answer:

The program written in Python is as follows:

See Explanation section for line by line explanation

for n in range(100,1000):

     isum = 0

     for d in range(1,n):

           if n%d == 0:

                 isum += d

     if isum == n * 2:

           print(n)

Explanation:

The program only considers 3 digit numbers. hence the range of n is from 100 to 999

for n in range(100,1000):

This line initializes sum to 0

     isum = 0

This line is an iteration that stands as the divisor

     for d in range(1,n):

This line checks if a number, d can evenly divide n

           if n%d == 0:

If yes, the sum is updated

                 isum += d

This line checks if the current number n is a double-perfect number

     if isum == n * 2:

If yes, n is printed

           print(n)

When the program is run, the displayed output is 120 and 672

Answer:

Locality of reference.

Explanation:

In computing, The principle of locality of reference is the probability of a processor to repeatedly access the same set of memory locations within a small time interval. This reference of locality can be spatially based (repetitive usage of data within the same location on the computer memory), or temporally based (repetitive usage of a particular data or resources within a shot time interval). The ability of some computing system to perform this action increases their predictability, and efficiency of memory hierarchy use, among other abilities.

Answer:

"NOT lookup " is the correct approach.

Explanation:

Answer:

a. Local user profile.

Explanation:

Local user profile is a type of user profile which is stored in the C:\Users folder and is automatically created when a user logs on to the computer for the first time and it is being stored on the local hard disk of the computer.

Generally, in Microsoft windows any change made to the local user profile is peculiar to the user and the host computer on which the change is made.

Hence, local user profiles avails several users the opportunity of sharing a single computer with their respective user settings and data.

Answer:

Replace

/* Your solution goes here */

with

if (bagOunces < 2) {

   System.out.print("Too Small");

}

else if(bagOunces > 10) {

   System.out.print("Too Large");

}

else {

   System.out.print((bagOunces * 6)+" seconds");

}

Explanation:

This line checks if bagOunces is less than 2;

if (bagOunces < 2) {

If yes, the string "Too Small" is printed

   System.out.print("Too Small");

}

This line checks if bagOunces is greater than 10

else if(bagOunces > 10) {

If yes, the string "Too Large" is printed

   System.out.print("Too Large");

}

The following condition is executed if the above conditions are false

else {

This multiplies bagOunces by 6 and adds seconds

   System.out.print((bagOunces * 6)+" seconds");

}

Answer:

I am writing a Python program:

pi=3.14 #the value of pi is set to 3.14

radius = float(input("Enter the radius of sphere: ")) #prompts user to enter the radius of sphere

surface_area = 4 * pi * radius **2 #computes surface area of sphere

volume = (4.0/3.0) * (pi * radius ** 3) #computes volume of sphere

print("Surface Area of sphere is: ", surface_area) #prints the surface area

print("Volume of sphere is: {:.2f}".format(volume)) #prints the volume        

Explanation:

Please see the attachment for the complete interactive code.

The first three lines of print statement in the attached image give a brief description of the program.

Next the program assigns 3.14 as the value of π (pi). Then the program prompts the user to enter the radius. Then it computes the surface area and volume of sphere using the formulas. Then it prints the resultant values of surface area and volume on output screen.

The psuedocode for this program is given below:

PROGRAM SphereVolume

pi=3.14

NUMBER radius, surface_area, volume  

INPUT radius

COMPUTE volume = (4/3) * pi* radius ^3

COMPUTE surface_area = 4 * pi * radius ^ 2

OUTPUT volume , surface_area

END

Answer:

Here is the JAVA program. Let me know if you need the program in some other programming language.

import java.util.Scanner; // used for taking input from user

public class Main{ //Main class

public static void main(String[] args) {//start of main() function body

  Scanner scan = new Scanner(System.in); // creates a Scanner type object

   String input; // stores input series

    int sum = 0; //stores the sum of the series

    System.out.println("Enter a series of numbers separated by commas: "); //prompts user to enter a series of numbers separated by comma

     input = scan.nextLine(); //reads entire input series

     String[] numbers = input.split("[, ]"); //breaks the input series based on delimiter i.e. comma and stores the split sub strings (numbers) into the numbers array

   for (int i = 0; i < numbers.length; i++) { //loops through each element of numbers array until the length of the numbers reaches

          sum += Integer.parseInt(numbers[i]); } // parses the each String element of numbers array as a signed decimal integer object and takes the sum of all the integer objects

     System.out.println("Sum of all the numbers: " + sum);  } } //displays the sum of all the numbers

Explanation:

The program prompts the user to enter a series separated by commas.

Then split() method is used to split or break the series of numbers which are in String form, into sub strings based on comma (,) . This means the series is split into separate numbers. These are stored in numbers[] array.

Next the for loop iterate through each sub string i.e. each number of the series, converts each String type decimal number to integer using Integer.parseInt and computes the sum of all these integers. The last print statement displays the sum of all numbers in series.  

If the input is 7,9,10,2,18,6

Then the output is: 7+9+10+2+18+6

sum = 52

The program and its output is attached.

Answer:

It depends. (OPINION)

Explanation:

If this is an important email, and it REALLY had to be sent the day of, then yes, it may be appropriate to call the day of. However, if you procrastinated until the last day and are really worried; well; that's your fault. At least wait a day and give the receiver some time to process; they could be really busy. At least that's how I view it.

Answer:

The correct answer is "List of posts with the most recent ones at the top".

Explanation:

So that the above would be the appropriate one.

Answer:

import csv

import sys

file_csv = argv

with open( "file_csv", "rb" ) as file:

      rowlist= csv.DictReader( file )

      dict_count={ }

      for row in rowlist:

           dict_count[ row[ 'department' ] ] = dict_count.get( row[ 'department' ], 0 ) + 1

      print( " The count of employees per department are", dict_count )

Explanation:

The python script in the solution above is able to accept user input csv files via command prompt and get an output of the number of employees for each department.

Answer:

Answered below

Explanation:

The DNS server is said to be a caching-only DNS server.

A caching-only Domain Name System server, works by recieving queries from the client, proceeds to perform queries against other named servers, then caches the results and returns the results to the client.

Subsequent queries are resolved and returned for the specified host straight from the the cache, by the server, instead of submitting to the external server.

The advantage of this process is that it reduces traffic from outgoing DNS and speeds up the name resolution. Also, there is a reduction in the amount of query traffic.

Answer:

Explanation:

Depending on the software that Raj was using to create his project he should first see if the software itself saved the project. Usually many software such as those included in the Microsoft Office Suite save the file automatically every 5 minutes or so in case of a power outage or abrupt closure of the file. If this is not the case he should try and do a system restore with the unlikely hope that it restores an older version of his project.

In a situation like this, it would be advisable for Raj to contact IT personnels and seek if the files could be retrieved.

These way, the files could be retrieved and avoid losing his work.

Learn more : https://brainly.com/question/15315011