A flexible container has 5.00 L of nitrogen gas at 298 K. If the temperature is
increased to 333 K, what will be the new volume of that sample of nitrogen?

1) 0.179 L
2) 0.223 L
3) 4.47 L
4) 5.59

Answer:

D

Explanation:

Because of their complementary nature, the oxidation and reduction processes together are referred to as redox reactions. The reactant that brings about the oxidation is called the oxidizing agent, and that reagent is itself reduced by the reducing agent. Examples are, mercury(II) oxide, oxygen, and the copper(II) ion are oxidizing agents, and carbon, hydrazine, and zinc are the reducing agents.

Answer:D

Explanation:Because of their complementary nature, the oxidation and reduction processes together are referred to as redox reactions. The reactant that brings about the oxidation is called the oxidizing agent, and that reagent is itself reduced by the reducing agent. Examples are, mercury(II) oxide, oxygen, and the copper(II) ion are oxidizing agents, and carbon, hydrazine, and zinc are the reducing agents.

Answer:

I think they have high, because the nonpolar molecules usually have a much lower surface tension than polar ones.

Answer:

19.4 g of alum, will be its theoretical yield

Explanation:

The reaction is:

2 Al + 2 KOH + 4 H₂SO₄ + 22H₂O → 3H₂ + 2KAl(SO₄)₂•12H₂O

Let's determine the amount of acid.

M are the moles contained in 1 L of solution or it can be mmoles that are contained in 1 mL of solution

M = mmol /mL

M . mL = mmol

We replace: 8.3 mL . 9.9 M = 82.17 mmoles

We convert to moles: 82.17 mmol . 1 mol / 1000mmol = 0.082 moles

Ratio is 4:2

4 moles of sulfuric acid can make 2 moles of alum

By the way, 0.082 moles of acid may produce ( 0.082 . 2) /4 = 0.041085 moles.

We convert moles to mass:

Molar mass of alum is: 473.52 g/mol.

0.041085 moles . 473.52 g/mol = 19.4 g

Answer:

7276783

Explanation:

8765467

What does botanist study?

[tex]\implies {\blue {\boxed {\boxed {\purple {\sf {D.\: Plants}}}}}}[/tex]

[tex]\bold{ \green{ \star{ \orange{Hope\:it\:helps.}}}}⋆[/tex]

Answer:

A. There is more dissolved oxygen in colder waters than in warm water.

D. If ocean temperature rise, then the risk to the fish population increases.

Explanation:

Conclusion that can be drawn from the two facts stated above:

*Dissolved oxygen is essential nutrient for fish survival in their aquatic habitat.

*Dissolved oxygen would decrease as the temperature of aquatic habit rises, and vice versa.

*Fishes, therefore, would thrive best in colder waters than warmer waters.

The following are scenarios that can be explained by the facts given and conclusions arrived:

A. There is more dissolved oxygen in colder waters than in warm water (solubility of gases decreases with increase in temperature)

D. If ocean temperature rise, then the risk to the fish population increases (fishes will thrive best in colder waters where dissolved oxygen is readily available).

Answer: the answers are A and D

Explanation:

i got it right

Answer:

Explanation:

Find the answer below

Answer:

mice

bacteria

fungi

Explanation:

that's the answer

Answer: The formation of a gaseous product is indicated by an UPWARD ARROW in a chemical reaction.

Explanation:

A chemical reaction is defined as the process whereby chemical bonds between atoms of

substances known as reactants are either formed or broken leading to the formation of products. New substances are usually formed during a chemical reaction. The following are features of chemical reaction:

--> Evolution of gas

--> Formation of a precipitate

--> Change in color

--> Change in temperature

--> Change in state and

--> Formation of new substances.

Some chemical reactions takes place with the evolution of gas. This can be seen in the reaction of Zinc metal with hydrochloric acid. Hydrogen gas is EVOLVED with the formation of zinc chloride.

UPWARD ARROW in a chemical reaction indicates the evolution of a gas. It appears only on the product side and is written next to the gaseous product.

My answer is in the picture.

Stay safe always

[tex]\huge\boxed{\boxed{\underline{\textsf{\textbf{Answer}}}}}[/tex]

⁺˚*･༓☾✧.* ☽༓･*˚⁺‧

⏩ The scattering of a beam of light through a colloidal solution in its dispersed phase is known as [tex]\large\boxed{tyndall \ \ effect}[/tex].

⁺˚*･༓☾✧.* ☽༓･*˚⁺‧

ʰᵒᵖᵉ ⁱᵗ ʰᵉˡᵖˢ

꧁❣ ʀᴀɪɴʙᴏᴡˢᵃˡᵗ2²2² ࿐

Answer:

c

Explanation:

Molar Mass of Al = 27

Molar Mass of S = 32

Molar Mass of O = 16

Putting the molar mass value in Al2 (SO4) 3

27 x 2 + 3 ( 32 + 16 x 4)

54 + 3 ( 32+ 64)

54 + 3 x 96

54 + 288

342

Answer:

here is the answer. Feel free to ask for more chem help <3

Answer:

Mole of NaOH = 0.00308 mole

Explanation:

From the question given above, the following data were obtained:

Volume = 22 mL

Molarity = 0.140 M

Mole of NaOH =?

Next, we shall convert 22 mL to L. This can be obtained as follow:

1000 mL = 1 L

Therefore,

22 mL = 22 mL × 1 L / 1000 mL

22 mL = 0.022 L

Finally, we shall determine the number of mole of NaOH in the solution. This can be obtained as shown below:

Volume = 0.022 L

Molarity = 0.140 M

Mole of NaOH =?

Molarity = mole / Volume

0.140 = Mole of NaOH / 0.022

Cross multiply

Mole of NaOH = 0.140 × 0.022

Mole of NaOH = 0.00308 mole

Thus, 0.00308 mole of NaOH is present in the solution.

Answer:

1.3 × 10²⁵ atoms

Explanation:

Step 1: Calculate the volume of an apple

The radius of an apple is 3.5 cm (3.5 × 10⁻² m). If we assume it is a sphere, we can calculate its volume using the following expression.

V = 4/3 × π × r³

V(apple) = 4/3 × π × (3.5 × 10⁻² m)³ = 1.8 × 10⁻⁴ m³

Step 2: Calculate the volume of 1 atom

The radius of 1 atom is 1.5 A (1.5 × 10⁻¹⁰ m). If we assume it is a sphere, we can calculate its volume using the following expression.

V = 4/3 × π × r³

V(atom) = 4/3 × π × (1.5 × 10⁻¹⁰ m)³ = 1.4 × 10⁻²⁹ m³

Step 3: Calculate how many atoms are in 1 apple.

V(apple)/V(atom) = 1.8 × 10⁻⁴ m³/1.4 × 10⁻²⁹ m³ = 1.3 × 10²⁵

Answer:

Unit is the standard assigned to measure physical quantity. ... Length, mass, time, temperature, luminous intensity, and the electric current are known as the fundamental quantities. These are represented by L, M, T, 0, Cd, and A respectively

OAmalOHopeO

Answer:

When an ionic crystal breaks, it tends to do so along smooth planes because ... ions are forced near each other and the repulsive force causes the crystal to shatter. ... Cations move to one electrode, while anions move to the other, ... Diagram of ions in an ionic solution when an electrical current is applied.

Explanation:

Hope this helped

Answer:

Why do you need good toothpaste?

Explanation:

Answer:

Do this yourself smh this isnt what the wesite is for

Explanation:

Answer:

Formula of EPSOM salt = MgSO4.7H2O

molecular mass of MgSO4.7H2O = atomic mass of Mg + atomic mass of S + 4 × atomic mass of O + 7 { 2 × atomic mass of H + atomic mass of O }

= 24 + 32 + 4× 16 + 7{ 2 × 1 + 16 } g/mol

= (24 + 32 + 64+ 126 ) g/mol

= 246 g/mol

molecular mass of total water = 7 × ( 2× atomic mass of H + atomic mass of O )

= 7 × 18 = 126 g/mol

now ,

% mass of H2O in EPSOM salt = {total molar mass of H2O/molar mass of Epsom salts }× 100

= {126/246 } × 100

= 12600/246

= 51.21 %

Explanation:

i have done it hope it helps

Answer:

1. Greenhouse gas.

2. Carbon sequestration.

3. Greenhouse effect.

Explanation:

Greenhouse gases can be defined as gases that trap heat within the Earth's atmosphere. Thus, an increase in global temperature is largely caused due to an increase in the amount of greenhouse gases in Earth's atmosphere.

Some examples of greenhouse gases present in the atmosphere are methane, water vapor, carbon dioxide etc.

Matching the descriptions with their term respectively, we have;

1. Greenhouse gas: carbon dioxide, water vapor, methane, nitrogen oxides, and some CFCs that absorb heat and keep it in the earth's atmosphere

2. Carbon sequestration: it's a technology used to capture the carbon released from smokestacks and store it in some part of the environment to keep it out of the atmosphere. Thus, it's a process that is typically used for capturing and the long-term storage of atmospheric carbon dioxide in soil, ocean, plants and geologic formation, so as to reduce global warming or climate change.

3. Greenhouse effect: it's a term used to describe the negative role that greenhouse gases such as methane, water vapor, carbon dioxide etc., play in keeping the earth warm.

Explanation:

hope the picture above help u understand:)

The relative atomic mass (Ar) of this element is approximately 63.6 (to three significant figures).

To determine the relative atomic mass (Ar) of the element, we use the following formula:

Ar = (m₁ × % abundance1 + m₂ × % abundance2) / 100

Where:

m₁ and m₂ are the masses of the isotopes (peaks) in the mass spectrum,

% abundance1 and % abundance2 are the percentage abundances of the corresponding isotopes.

Given information:

Peak at m/z 63.0 with a percentage abundance of 69.1%.

Peak at m/z 65.0 having a percentage abundance of 30.9%.

Calculate the weighted average mass of the element's isotopes.

Ar = (63.0 × 69.1 + 65.0 × 30.9) / 100

Ar = (4347 + 2009.5) / 100

Ar = 6356.5 / 100

Ar ≈ 63.565

Noe, let's round the calculated mass to three significant figures.

Ar = 63.6

So, the relative atomic mass (Ar) of this element is approximately 63.6 (to three significant figures). This means that the average mass of the element's atoms is approximately 63.6 times the mass of one-twelfth of a carbon-12 atom, which is the standard reference for atomic masses.

To know more about relative atomic mass here

https://brainly.com/question/25698972

#SPJ3

Answer:

–87.3 KJ.

Explanation:

The equation for the reaction is given below:

H₂(g) + ½O₂(g) —> H₂O(l) ∆H = -285.8 kJ

Next, we shall determine the mass of H₂O produced from the balanced equation. This can be obtained as follow:

Molar mass of H₂O = 18 g/mol

Mass of H₂O from the balanced equation = 1 × 18 = 18 g

SUMMARY:

From the balanced equation above,

When 18 g of H₂O was produced, ∆H was –285.8 KJ.

Finally, we shall determine ∆H when 5.5 g of H₂O is produced. This can be obtained as illustrated below:

From the balanced equation above,

When 18 g of H₂O was produced, ∆H was –285.8 KJ.

Therefore, 5.5 g of H₂O will produce ∆H of = (5.5 × –285.8) / 18 = –87.3 KJ

Thus, the ∆H when 5.5 g of H₂O was produced is –87.3 KJ.

Answer:

the equation is balanced

Explanation:

the equation is balanced

Explanation:

the equation is blanced

Answer: The mass of chlorine gas required is 94.6 mg

Explanation:

The number of moles is defined as the ratio of the mass of a substance to its molar mass.

The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

Given mass of gold = 0.175 g

Molar mass of gold = 197 g/mol

Plugging values in equation 1:

[tex]\text{Moles of gold}=\frac{0.175g}{197g/mol}=0.000888 mol[/tex]

The given chemical equation follows:

[tex]2Au+3Cl_2\rightarrow 2AuCl_3[/tex]

By the stoichiometry of the reaction:

If 2 moles of gold reacts with 3 moles of chlorine gas

So, 0.000888 moles of gold will react with = of chlorine gas

Molar mass of chlorine gas = 71 g/mol

Plugging values in equation 1:

[tex]\text{Mass of chlorine gas}=(0.001332mol\times 71g/mol)=0.0946g=94.6mg[/tex]       (Conversion factor: 1 g = 1000 mg)

Hence, the mass of chlorine gas required is 94.6 mg

Answer:

B. 2.14 x 10^-19 J

Explanation:

The energy of a wave of light can be obtained using the equation:

E = h*c/λ

Where E is the energy in joules,

λ is wavelength = 930nm = 930x10⁻⁹m

h = Planck's constant = 6.626x10⁻³⁴Js

c = Speed of light = 3.00x10⁸m/s

Replacing:

E = 6.626x10⁻³⁴Js*3.00x10⁸m/s/930x10⁻⁹m

E = 2.14x10⁻¹⁹J

Right option is:

Explanation:

Neutralisation reactions are not always exothermic. ... When an acid is neutralised by an alkali the reaction is exothermic.SInce strong acids and strong bases are completely dissociated in solution, no formal bonds are being broken. The formation of two very strong covalent bonds between hydrogen and the hydroxide ion is responsible for the neutralization reaction's exothermic character.

hope it helps

Answer:

10

Explanation:

how many electron-containing d orbitals are there in an atom of tin? name the element in the 4th period whose atoms have the same number of highest-energy-level elctrons as tin

10, germanium

Two or more than two atoms with different physical or chemical properties can not combine together to form an element. Therefore, the total number of orbitals containing electrons in an atom of tin are 10 orbitals.

Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same.

The electronic configuration of tin is 1s² 2s² 2p⁶ 3s²3p⁶ 4s² 3d¹⁰ 4p⁶ 5s²4d¹⁰ 5p² or [Kr] 5s² 4d¹⁰ 5p². The total number of orbitals containing electrons in an atom of tin are 10 orbitals. tin an element that belongs to p block of periodic table.

Therefore, the total number of orbitals containing electrons in an atom of tin are 10 orbitals.

To know more about element, here:

https://brainly.com/question/8460633

#SPJ2

Answer:

Risky behavior or risk-taking behavior is defined according to Trimpop (1994) as “any consciously, or non-consciously controlled behavior with a perceived uncertainty about its outcome, and/or about its possible benefits, or costs for the physical, economic or psycho-social well-being of oneself or others.” In addition to this broad definition, there are other definitions of risky behavior depending on the field of research. While in the economic view, risk is defined in terms of the variability of possible monetary outcomes, in the clinical literature, the risk is generally defined as exposure to possible loss or harm (Schonberg, Fox, & Poldrack, 2011). Turner et al. (2004) described risk-taking behavior further as either a socially unacceptable volitional behavior with a potentially negative outcome in which precautions are not taken, such as speeding, drinking and driving, drugs abuse, unprotected sex and so on.

Answer:

56.2

Explanation:

mark me as BRAINLIEST

follow me

carry on learning

100 %sure