Answer:
It is Potential and corresponding to
90
J
.
Explanation:
Potential Energy is energy stored in the system and ready (potentially) to be changed into, say, Kinetic Energy through movement.
The general expression for Gravitational Potential Energy is:
U=mgh
where:
mg is the weight; h is the height relative to a certain reference level (the ground in this case) choosen to have zero Potential Energy.
With your data we get:
U=3⋅30=90J
Due very soon! 100 points please answer for all three diagrams!
The woman supports a 100 N load with the friction free pulley system shown below. Fill in the spring scale readings that show how much force she must exert.
Answer:
1. 100N 2. 50N 3. 50N
Explanation:
The spring scale reading that shows how much force she must exert is 1. 100N 2. 50N 3. 50N.
What is the spring scale?A simple and affordable way to determine mass is by using spring balances. The mass is suspended from the end of the spring, and the spring's deflection as a result of the mass's downward gravitational pull is measured in relation to a scale.
The word "force" has a specific meaning in science. At this level, calling a force a push or a pull is entirely appropriate. A force is not something an object "has in it" or that it "contains."
One thing experiences a force from another. There are both living things and non-living objects in the concept of a force.
Therefore, her required force is indicated by the spring scale readings of 1. 100N, 2. 50N, and 3. 50N.
To learn more about spring scale, refer to the link:
https://brainly.com/question/13949751
#SPJ2
what is mass times acceleration?
Answer:
Force
Explanation:
The mass of an object is the quantity of matter it contains. It is measured in kilograms.
Acceleration is the ratio of the change in the velocity of an object to the change in time. It is measured in m/[tex]s^{2}[/tex].
When the mass of an object is multiplied with its acceleration, this gives the average force applied on the object. As force is defined as agent that can change the state of an object.
i.e F = m × a
where F is the force, m is the mass of the object and a its acceleration.
The two major classes of force are; contact force and field force.
Which term is defined as the force applied to the object divided by the mass of the object?
speed
velocity
mass
acceleration
Answer:
acceleration
Explanation:
From the question: "FORCE... divided by the MASS..." is translated to a math equation as "F / m", where "F" is the force and "m" is the mass.
Now, the second Newton's law says "F = m . a ", where a is acceleration.
If you move m to the left side, clearly you have "F / m", and "a" is alone to the right. Math equation:
a = F / m
acceleration = force / mass
3. Which of the following is an example of a
supplemental restraint system?
(a) air bag
(c) lap and shoulder belt
(b) safety belt
(d) antilock brakes
Answer:
A) air bag is your answer
Answer:
air bag
Explanation:
Any of several restraining systems in a vehicle, such as an airbag, in addition to the seatbelts.
In a circult, a battery is used to
1. slow down current
2. conduct current
3. raise the potential of electrons
4. convert electrical energy into some other form of energy
Answer:
4. convert electrical energy into some other form of energy
What can happen if the excretory system doesn't work properly ?
A Physics question regarding circuits and electricity.
ASAP if you answer right I will mark brainiest
Answer:
I'm glad you asked!
Explanation:
1.Venus is the hottest planet in the solar system.
2.Opportunity explored Mars' surface.
3.Earth is the only planet in the solar system known to have plate Tectonics.
4.Mercury is one of the four planets closest to the Sun.
5.Mercury is the smallest of all planets in the solar system.
6.Messenger is a space aircraft that orbits and studies Mars.
7.Venus has the largest volcano in the solar system.
Which is true about density?
A. A possible unit for density is grams.
B. Liquid gold is denser than solid gold.
C. Density is found by multiplying mass
and volume.
D. Density is independent of the
amount of the sample.
Answer:
Density is independent of the
amount of the sample. (D)
Explanation:
Because density is an intrinsic property of matter.
hope it helps!
Answer:
D. Density is independent of the
amount of the sample.
Explanation:
Density is expressed in units of mass per volume, such as g/mL or kg/m3. Because the density of a substance does not depend on the amount of substance present, density is an “intensive property”. To measure the density of a sample of material, both the mass and volume of the sample must be determined.
Hope this Helps, Pls mark as the Brainliest
Balance chemical reactions: please help question attached
For any energy source including batteries, there will be conduction of electricity if there is a potential
difference
similarity
Answer:
Difference
Explanation:
The electricity conduction happens when there is a flow of current. The flow of current from one point to another can only occur if there is a potential difference.
If there is not potential difference between two points the current will not flow and thus electricity conduction will also be not possible. The current in the circuit will flow from higher potential point to lower potential point.
When light rays appear to be coming from behind a mirror, what type of image has been formed?
A.imaginary
B.real
C.plane
D.virtual
Answer:
The answer ...........may be D.
does space have plenty of oxygen
Answer:
I don't think so because we can't breathe in space
Explanation:
Answer:
No
Explanation:
There is no oxygen in space, so astronauts must bring tanks of oxygen
What is used in the name of ionic compounds containing a cation with multiple charges to indicate which charge?
(No answers to display)
Answer:
Roman Numerals?
Explanation:
Iron(II), would be iron 2+
iron(III), would be iron 3+
for example.
_ is (are) the type of electromagnetic wave(s) with a wave length between 700 and 400 billionths of a meter.
Answer:
Visible Spectrum is the type of electromagnetic wave with a wave length between 700 and 400 billionths of a meter.
What does ROCAPV mean?
Answer: Rancho de Area Comunes PV
Explanation: it means
Rancho de Area Comunes PV
In an AC Monte Roca PV System Profile, where the following are depicted:
Location
Commissioning
Production
Operator
PV system power
Module
And communication.
pls what is a friendly relationship
Answer:
A relationship where both members are freindly and supportive towards each other.
Explanation:
Brainliest?
Answer:
i do not know is your are talking about boyfriend and girlfriend relationship of you are talking about friendship i am just going to say both so for a friendship they do not have to like the same thing but if they do that is cool they have to be nice to each other and understand what one of them wants to do and they have to get along if they want to have a goof friendship so for boyfriend and girlfriend it is okay for them to fight and not understand each other they have to be friends so they can no what they like to do with each other then they can go on dates together
Explanation:
hope i help sorry very long
A pendulum reaches a height of 0.3 m at the top of its swing. If the
bob has a mass of 5 kg, what is the potential energy at the top of its
swing?
Select one:
14.7)
7.35 J
0.45 J
1.5 J
Answer: A
Potential energy = 14.7 J
Explanation:
Given that the
Mass M = 5 kg
Height h = 0.3 m
Let us take acceleration due to gravity g = 9.81 m/s^2
Potential energy = mgh
Substitute all the parameters into the formula above
P.E = 5 × 9.81 × 0.3
P.E = 14.715 J
P.E = 14.7 J approximately
The correct option is therefore A
The diagram shows the field lines near the poles, X and Y, of two magnets.
At left a rectangular box with the long horizontal side labeled X. At right a rectangular box with the long horizontal side labeled Y. There is a gap between the boxes. Curved lines with arrowheads emerge from the right end of X and the left end of Y and point up and down.
Based on the field lines, what are the poles of the magnets?
X: north
Y: south
X: south
Y: north
X: north
Y: north
X: south
Y: south
Answer: I think it is C
Explanation: sorry if it wrong
Answer:
C
Explanation:
got it right on edge
Determine What is the efficiency of a machine whose work output is 4 joules, and whose work input is 10 joules?
Answer:
The efficiency of the machine is 40 %.
Explanation:
We have,
Output work by the machine is 4 joules and the input work is 10 joules.
It is required to find the efficiency of a machine. The efficiency of a machine is given by the ratio of output work to the input work. It is given as :
[tex]\eta=\dfrac{4}{10}\times 100\\\\\eta=40\%[/tex]
So, the efficiency of the machine is 40 %.
if 34.7 g of O2 reacts with iron to form 79.34 g of iron oxide, how much iron was used in the reaction?
A.
19.84 g
B.
44.64 g
C.
104.1 g
D.
114.04 g
Answer: B. 44.64 g
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.
Mass of reactants = mass of iron + mass of oxygen = mass of iron + 34.7 g
Mass of product = mass of iron oxide = 79.34 g
As Mass of reactants = Mass of product
mass of iron + 34.7 g = 79.34 g
mass of iron = 44.64 g
Thus 44.64 g of iron was used in the reaction
An isotope releases radiation in order to ____________ its nucleus.
stabilize
destroy
Answer:
stabilize
I think this should be the answer...
Answer stabilize
Explanation: hope it’s right
Which of the following is a homogenous mixture?
Answer:
Blood
Explanation:
Homogenous means the same type and a box with toys, spaghetti and meatballs, and trail mix all have variety.
Answer:
B is the correct answer
What is the kinetic energy of a bicylcle with a mass of 15 kg traveling at a velocity of 3 m/s?
KE = 0.5 x mv^2
Kinetic energy equals 1/2 times mass times velocity squared.
Mass = 15kg
Velocity = 3m/s
Plug it into the formula.
KE = 0.5 x 15(3^2)
KE = 0.5 x 15(9)
Multiply the mass and velocity squared.
KE = 0.5 x 135
Then, multiply the result by 1/2 or 0.5
KE = 67.5
The kinetic energy of a bicycle that has a mass of 15kg and travels at 3m/s is 67.5J.
Answer:
67.5 J
Explanation:
Kinetic energy can be found using the following formula.
[tex]KE=\frac{1}{2}mv^2[/tex]
where m is the mass in kilograms and v is the velocity in m/s.
We know the bike has a mass of 15 kilograms. We also know the velocity is 3 m/s. Therefore, we can substitute 15 for m and 3 for v
[tex]KE=\frac{1}{2}*15*3^2[/tex]
Evaluate the exponent first. 3^2 is the same as 3*3, which is equal to 9.
[tex]KE=\frac{1}{2} *15*9[/tex]
Multiply 15 and 9.
[tex]KE=\frac{1}{2} *135[/tex]
Multiply 1/2 and 135
[tex]KE=67.5[/tex]
Add appropriate units. Kinetic energy uses Joules or J as the units.
[tex]KE= 67.5 Joules[/tex]
The kinetic energy of the bike is 67.5 Joules
A student measured the volume of three rocks. The diagram above shows the
results of her investigation. Which correctly orders the rocks from least to
greatest?
A. Rock A, Rock B, Rock C
B. Rock C, Rock A, Rock B
C. Rock B, Rock C, Rock A
D. Rock A, Rock C, Rock B
Answer:
option B is right
...............
Answer: A C B
Explanation:
If you look closely the water levels show which is bigger fun fact.
An object has an acceleration of 18.0 m/s/s. If the net force was doubled and the mass were tripled then the new acceleration would be
Answer:
12.0 m/s²
Explanation:
Newton's second law:
F = ma
Solving for acceleration:
a = F/m
If force is doubled and mass is tripled:
a' = (2F)/(3m)
a' = ⅔ (F/m)
a' = ⅔ (18.0 m/s²)
a' = 12.0 m/s²
The new value of acceleration of object is 12 m/s².
Given data:
The magnitude of acceleration of object is, [tex]a =18 \;\rm m/s^{2}[/tex].
Let F be initial net force and m be the initial mass. Then as per the problem, the new values of each are,
F' = 2F
m' = 3m
Apply the Newton's Second law, which says that the product of mass and acceleration of object given net force. Then,
F = ma
F = m(18)
F/m = 18 .................................................(1)
Now, for new value of net force,
F' = m'a'
2F = (3m) a'
2F/3m = a'
a' =2/3× (18) (From equation 1)
a' = 12 m/s²
Thus, we can conclude that the new value of acceleration of object is 12 m/s².
Learn more about the Newton's second law here:
https://brainly.com/question/19860811
During which two phases would surfer’s most likely benefit
A. New and Full Moon
B. New moon and Waxing Crescent
C. Full Moon and Waxing Gibbous
D. 1st Quarter and 3rd Quarter
The phases where surfer’s most likely benefit include D. 1st Quarter and 3rd Quarter.
Surfers will benefit include during the 1st Quarter and 3rd Quarter because there's tidal change. Tidal change is when coastal areas experience two low and high tides.
The benefit of surfing during this period is that it helps jack the waves. Waves transmit energy and this is important to surfers.
Read related link on:
https://brainly.com/question/18253248
In a series circuit, electrons only flow along one path. Given this information, which of the following is an advantage of series circuits?
A.
The voltage is the same everywhere in a series circuit.
B.
Less resistance is produced as more devices are added to the circuit.
C.
Series circuits are simpler than parallel circuits.
D.
If one part of the circuit breaks, the other parts will still be able to operate.
Answer:
C. Series circuits are simpler than parallel circuits.
Explanation:
In series circuit, all the components are connected in single path of current flow. If one part of the circuit breaks, the whole thing would break and none of the other parts would work. The voltage is not the same everywhere. It is different across each component. In series circuit, net resistance is more as resistance of all the components connected in series are added up. So, the only advantage of a series circuit is that is simpler than the parallel circuits.
why is it dangerous to connect a battery to itself. what is the term used to describe that
This graph provides data on the amount of water needed to grow four different crops, each used to produce ethanol, a fuel. For each crop, the data shows how many liters of water are needed to produce one liter of ethanol fuel. Which of the following would require using the most water? *
Producing 100 L of ethanol from sugar cane
Producing 200 L of ethanol from sugar beet
Producing 300 L of ethanol from potatoes
Producing 400 L of ethanol from corn
Answer:
Producing 300 L of ethanol from potatoes
Explanation:
From the diagram, one liter of ethanol production from sugar cane requires 2000 liters of water. Hence, in order to produce 100 L of ethanol from sugar cane, 2000 x 100 = 200,000 L of water.
1000 liters of water is needed to produce 1 liter of ethanol from sugar beet. Hence, 200 x 1000 = 200,000 L of water will be needed to produce 200 liters of ethanol.
1000 liters of water is also required to produce 1 liter of ethanol from potatoes, hence, 300 x 1000 = 300,000 L of water would be required to produce 300 L of ethanol from the same material
About 500 liters of water is required to produce 1 liter of ethanol from corn, hence, 400 x 500 = 200,000 L of water would be needed to produce 400 L of ethanol from corn.
In conclusion, producing 300 L of ethanol from potatoes would require using the most water among all the options.
